Bedienungsanleitung DSC Digital Security Control PC158O

19 Seiten 1.5 mb
Download

Zur Seite of 19

Summary
  • DSC Digital Security Control PC158O - page 1

    1 About Your Security System Your DSC security equipment has been designed to provide you with the greatest possible flexibility and convenience. Read this manual carefully and have your installer instruct you on your system's operation and on which features have been implemented in your system. All users of this system should be equally instr ...

  • DSC Digital Security Control PC158O - page 2

    2 System Information Fill out the following information for future reference and store this manual in a safe place. Access Codes Your Master Code is: __________________________________________ Additional Access Codes: 2 __________________ 3 ____________________ 4 ____________________ 5 __________________ 6 ____________________ Zone Information Zone ...

  • DSC Digital Security Control PC158O - page 3

    3 Access Codes Access Codes are used to arm and disarm the system. There are six access codes available: one Master Code and five access codes. Only the Master Code can be used to program additional security codes and to change other system features as well as to arm and disarm the security system. The Master Code will be supplied to you by your in ...

  • DSC Digital Security Control PC158O - page 4

    4 Alternate Arming Methods Away Arming Arming the system in the Away mode will have all interior zones and perimeter zones active. If motion is detected in the interior zones, or if one of the perimeter zones is violated, the alarm sequence will begin. To arm in the Away mode, enter your access code and exit the premises through a designated Exit/E ...

  • DSC Digital Security Control PC158O - page 5

    5 Disarming the System Disarming from an LED Keypad: Enter the premises through a designated Exit/Entry door; entering by any other door will sound an immediate alarm. As soon as the Exit/Entry door is opened, the keypad will beep to indicate that the system should be disarmed. Go to the keypad and enter your access code. If an error is made enteri ...

  • DSC Digital Security Control PC158O - page 6

    6 If An Alarm Sounds Fire Alarm If your system has been installed with fire detectors and the alarm sounds in a pulsing mode, follow your emergency evacuation plan immediately (see “Fire Escape Planning” on page 15). Intrusion Alarm If an intrusion alarm sounds, indicated by a continuous Bell or Siren, the alarm may be silenced by entering your ...

  • DSC Digital Security Control PC158O - page 7

    7 Programming codes from an LCD Keypad: Master Code Press the [ ✱ ] key to enter the function list. Scroll (< >) to... Press [5] or [ ✱ ]. The display will read... Enter your current Master Code. The display will read... “1P” represents the Master Code. Press the [ ✱ ] key to indicate that you wish to program the Master Code. The di ...

  • DSC Digital Security Control PC158O - page 8

    The Liquid Crystal Display (LCD) displays prompts and system information on two 16 character lines. If “< >” appears, more information can be accessed by using the arrow (< >) keys. Press [<] to see the previous function or item of information. Press [>] to advance the display to next function or item of information. Press the ...

  • DSC Digital Security Control PC158O - page 9

    10 Zone Bypassing The zone bypassing function is used when access is needed to part of the protected area while the system is armed. Zones which are temporarily out of service due to damaged wiring or contacts may be bypassed to allow system arming until repairs can be made. Bypassed zones will not cause an alarm. Zones cannot be bypassed once the ...

  • DSC Digital Security Control PC158O - page 10

    11 Viewing Trouble Conditions The control panel continuously monitors a number of possible trouble conditions. If one of these trouble conditions occur, the keypad will beep twice every 10 seconds until you press any key on the keypad. Troubles can only be viewed when the system is in the disarmed state. If a trouble occurs while the system is arme ...

  • DSC Digital Security Control PC158O - page 11

    12 Setting the System Date and Time To set the system time, enter [ ✱ ] [6] followed by the Master Code. Press [1]. The keypad will now accept 10 consecutive digits: • Enter the Time in Hours and Minutes using the 24 Hour format (00:00 to 23:59). • Enter the Date in Months, Days and Years (MM DD YY). Language Selection (LCD Keypads Only) The ...

  • DSC Digital Security Control PC158O - page 12

    13 4. Activate each sensor in turn (e.g. open a door/window or walk in motion detector areas). From an LED keypad, observe the zone light turn ON when the zone is activated. The zone light will turn OFF when the system restores to normal (i.e. door or window closed). From an LCD keypad, the following message will be displayed when each zone is acti ...

  • DSC Digital Security Control PC158O - page 13

    14 Fire Alarm Operation Alarm On a fire alarm, the bell or siren will pulse ON and OFF. The transmission of the alarm to the monitoring station is delayed for 30 seconds. If the alarm is not cleared within the 30 second delay, the it will be transmitted to the monitoring station. Silence To silence the bell or siren, press the [#] key. If the alarm ...

  • DSC Digital Security Control PC158O - page 14

    15 Fire Escape Planning There is often very little time between the detection of a fire and the time it becomes deadly. It is thus very important that a family escape plan be developed and rehearsed. 1. Every family member should participate in developing the escape plan. 2. Study the possible escape routes from each location within the house. Sinc ...

  • DSC Digital Security Control PC158O - page 15

    16 Limited Warranty Digital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase, the product shall be free of defect in materials and workmanship under normal use and that in fulfilment of any breach of such warranty, Digital Security Controls Ltd. shall, at its option, repair or replace the defective equipm ...

  • DSC Digital Security Control PC158O - page 16

    © 1997 Digital Security Controls Ltd. Printed in Canada 29000467 R2 Instruction Manual PC158O ...

  • DSC Digital Security Control PC158O - page 17

    © 1997 Digital Security Controls Ltd. Printed in Canada 29000467 R2 Instruction Manual PC158O ...

  • DSC Digital Security Control PC158O - page 18

    FCC COMPLIANCE STATEMENT CAUTION : Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable p ...

  • DSC Digital Security Control PC158O - page 19

    FCC COMPLIANCE STATEMENT CAUTION : Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable p ...

Produzent DSC Kategorie Network Card

Dokumente, die wir vom Produzenten des Geräts DSC Digital Security Control PC158O erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen DSC
- Bedienungsanleitungen Digital Security Control PC158O
- Produktkarten DSC
- Informationsbroschüren
- oder Energieetiketten DSC Digital Security Control PC158O
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung DSC Digital Security Control PC158O.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen DSC Digital Security Control PC158O, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen DSC Digital Security Control PC158O. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts DSC Digital Security Control PC158O ansehen.

Die komplette Bedienungsanleitung des Geräts DSC Digital Security Control PC158O, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von DSC Digital Security Control PC158O hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von DSC Digital Security Control PC158O verständlich ist.

Eine gänzliche Bedienungsanleitung von DSC sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von DSC Digital Security Control PC158O bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von DSC Digital Security Control PC158O befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich DSC Digital Security Control PC158O, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts DSC Digital Security Control PC158O - die uns die ersten Schritte während der Nutzung von DSC Digital Security Control PC158O erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit DSC Digital Security Control PC158O hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von DSC Digital Security Control PC158O im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich DSC Digital Security Control PC158O?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit DSC Digital Security Control PC158O nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit DSC Digital Security Control PC158O hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)