Deutsch dropdown-ico

Bedienungsanleitung Sun Microsystems CP32x0

66 Seiten 1.99 mb
Download

Zur Seite of 66

Summary
  • Sun Microsystems CP32x0 - page 1

    Sun Microsystems, Inc. www .sun.com Submit comments about this document at: http://www.sun.com/hwdocs/feedback Netra ™ CP32x0 SAS Stor age Adv anced Rear T ransition Module HD User’ s Guide P ar t No . 820-3147-12 January 2009, Revision 01 ...

  • Sun Microsystems CP32x0 - page 2

    Please Recycle Copyright © 2009 Sun Microsystems, Inc., 4150 Network Cir cle, Santa Clara, California 95054, U.S.A. All rights reserved. This distribution may include materials developed by third parties. Parts of the product may be derived fr om Berkeley BSD systems, licensed from the University of California. UNIX is a r egistered trademark in t ...

  • Sun Microsystems CP32x0 - page 3

    iii Contents Preface xi 1. Overview 1–1 1.1 Features of the AR TM-HD 1–2 1.2 PICMG Standards Compliance 1–3 1.2.1 Maximum Power Dissipation 1–3 1.2.2 Airflow Cooling Requir ements 1–3 1.2.3 Pressur e Drop Rates 1–4 1.3 AR TM-HD Component Diagram 1–5 1.4 I/O Interfaces 1–6 1.5 Hard Disk Drives 1–8 1.6 Hard Disk Drive Contr oller 1? ...

  • Sun Microsystems CP32x0 - page 4

    iv Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 2.3 Removing the AR TM-HD 2–9 2.4 Installing a Hard Disk Drive 2–1 1 2.5 Removing a Hard Disk Drive 2–1 1 2.6 Changing the OOS LED Color 2–12 3. Disk Management 3–1 3.1 RAID Support 3–2 3.2 SAS BIOS Overview 3–2 3.3 Starting the SAS BIOS Con ...

  • Sun Microsystems CP32x0 - page 5

    Contents v 4.2.5 Module Management Controller 4–3 4.2.6 FRU PROM 4–4 4.3 Connectors and Pin Assignments 4–4 4.3.1 I/O Connectors 4–5 4.3.1.1 Ethernet Port 4–5 4.3.1.2 Serial Port 4–6 4.3.1.3 SAS Connectors 4–7 4.3.2 Zone 3 Connectors 4–8 Index Index–1 ...

  • Sun Microsystems CP32x0 - page 6

    vi Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 ...

  • Sun Microsystems CP32x0 - page 7

    vii Figur es FIGURE 1-1 Netra CP32x0 ARTM-HD Components 1–5 FIGURE 1-2 Relationship of the Blade Server, ATCA Midplane, and ARTM-HD 1–6 FIGURE 1-3 Connecting to an External Disk Array 1–9 FIGURE 1-4 Connecting to Another ARTM 1–10 FIGURE 1-5 LEDs 1–11 FIGURE 1-6 ARTM-HD Identification Labels 1–13 FIGURE 2-1 Installing the Blade Server a ...

  • Sun Microsystems CP32x0 - page 8

    viii Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 ...

  • Sun Microsystems CP32x0 - page 9

    ix T ables TABLE 1-1 Airflow Cooling Requirements 1–3 TABLE 1-2 Pressure Drop Rates 1–4 TABLE 1-3 Netra CP32x0 ARTM-HD I/O Configurations 1–7 TABLE 1-4 LED Descriptions 1–11 TABLE 4-1 Ethernet Port Connector Pin Assignments 4–5 TABLE 4-2 Serial Port Connector Pin Assignments 4–6 TABLE 4-3 External SAS Connector Pin Assignments 4–7 TAB ...

  • Sun Microsystems CP32x0 - page 10

    x Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 ...

  • Sun Microsystems CP32x0 - page 11

    xi Pr eface The Netra CP32x0 SAS Storage Advanced Rear T ransition Module HD (AR TM-HD) User ’ s Guide provides installation instructions and hardwar e specifications for the Netra™ CP32x0 SAS Storage Advanced Rear T ransition Module HD (AR TM-HD). This manual is written for system integration engineers, field applications and service engineers ...

  • Sun Microsystems CP32x0 - page 12

    xii Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 Using UNIX Commands This document might not contain information about basic UNIX ® commands and procedur es such as shutting down the system, booting the system, and configuring devices. Refer to the following for this information: ■ Software document ...

  • Sun Microsystems CP32x0 - page 13

    Preface xiii T ypographic Conventions T ypeface * * The settings on your browser might differ from these settings. Meaning Examples AaBbCc123 The names of commands, files, and directories; on-scr een computer output Edit your .login file. Use ls -a to list all files. % You have mail . AaBbCc123 What you type, when contrasted with on-screen computer ...

  • Sun Microsystems CP32x0 - page 14

    xiv Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 Related Documentation The following table lists the documentation for this product. Except for the Important Safety Information for Sun Hardware Systems , all the documents listed are available online at: http://docs.sun.com/app/docs/prod/cp32x0.sas?l=en ...

  • Sun Microsystems CP32x0 - page 15

    Preface xv Documentation, Support, and T raining Thir d-Party W eb Sites Sun is not responsible for the availability of third-party web sites mentioned in this document. Sun does not endorse and is not responsible or liable for any content, advertising, products, or other materials that are available on or thr ough such sites or resour ces. Sun wil ...

  • Sun Microsystems CP32x0 - page 16

    xvi Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 ...

  • Sun Microsystems CP32x0 - page 17

    1-1 CHAPTER 1 Overview This chapter provides an overview of the features, conf igurations, and system requir ements of the Netra CP32x0 SAS Storage Advanced Rear T ransition Module HD (AR TM-HD). This chapter contains the following sections: ■ Section 1.1, “Features of the AR TM-HD” on page 1-2 ■ Section 1.2, “PICMG Standards Compliance? ...

  • Sun Microsystems CP32x0 - page 18

    1-2 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 1.1 Featur es of the AR TM-HD The Netra CP32x0 SAS Storage Advanced Rear T ransition Module HD (AR TM-HD) is a fully compatible, carrier-grade Advanced T elecom Computing Architecture ® (A TCA) AR TM for A TCA blade servers designed to be compatible wit ...

  • Sun Microsystems CP32x0 - page 19

    Chapter 1 Overview 1-3 1.2 PICMG Standar ds Compliance The AR TM-HD is fully compliant with the PICMG ® 2.0 Revision 3.1 specification. 1.2.1 Maximum Power Dissipation The maximum power dissipation is 25 W atts. 1.2.2 Airf low Cooling Requirements T ABLE 1- 1 lists the airflow cooling r equirements based on a maximum power of 25W , which is the on ...

  • Sun Microsystems CP32x0 - page 20

    1-4 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 1.2.3 Pr essur e Dr op Rates T ABLE 1-2 lists the pressur e drop rates for the AR TM-HD. T ABLE 1-2 Pressur e Drop Rates V olumetric Flow Rate CFM V olumetric Flow Rate M 3 /min Pressure Drop Pascal Pressure Drop Inches H 2 0 1 0.03 0.5 0.002 2 0.06 1.24 ...

  • Sun Microsystems CP32x0 - page 21

    Chapter 1 Overview 1-5 1.3 AR TM-HD Component Diagram FIGURE 1-1 Netra CP32x0 AR TM-HD Components 1 - Serial por t (RS232) 2 - 10/100/1000 Gb Management por t (RJ-45) 3 - EXT SAS Secondar y 4 - EXT SAS Primar y 5 - Hard Disk Drive(s) (single HD contains one filler panel) 6 - Alignment Pin 7 - P ower connector 8 - Zone 3 connectors 9- OK LED 10- Out ...

  • Sun Microsystems CP32x0 - page 22

    1-6 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 1.4 I/O Interfaces The AR TM-HD installs into the rear of the A TCA enclosure, opposite an A TCA blade server designed for compatibility with the AdvancedRTM specif ication. The AR TM-HD connects to the blade server ’s Zone 3 rear connectors through th ...

  • Sun Microsystems CP32x0 - page 23

    Chapter 1 Overview 1-7 Note – When the AR TM-HD is used with a Netra A TCA blade server , shielded cables are r equired for serial I/O ports. The shields for all shielded cables must be terminated on both ends. Caution – Y ou must use shielded cables for all ports to satisfy EMI compliance standards. The customer can order the AR TM-HD, build a ...

  • Sun Microsystems CP32x0 - page 24

    1-8 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 1.5 Har d Disk Drives The AR TM-HD supports up to two SAS hard disk drives (HDs) with the following features: ■ 2.5” server-grade HDs, mounted in a NEMO bracket ■ 146 GB capacity at 10K RPM ■ hot-swappable 1.6 Har d Disk Drive Controller The AR T ...

  • Sun Microsystems CP32x0 - page 25

    Chapter 1 Overview 1-9 1.7 External SAS Connectors The AR TM-HD includes two external SAS connectors. These connectors can be used to connect additional disk packs, or to cr eate redundancy between two AR TM-HDs and their associated blade servers. When connecting the AR TM-HD to an external disk array , use the Primary SAS port connector . FIGURE 1 ...

  • Sun Microsystems CP32x0 - page 26

    1-10 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 FIGURE 1-4 Connecting to Another AR TM 1.8 LEDs LEDs are located on the panel of the AR TM-HD and on the hard disk drive(s). ...

  • Sun Microsystems CP32x0 - page 27

    Chapter 1 Overview 1-11 FIGURE 1-5 LEDs 1.9 Softwar e Support The AR TM-HD supports A TCA blade servers designed to be compatible with the AdvancedR TM specification, and the software supported by those blade servers. Refer to the following documentation for software support information: Hot-s wap LED Out of Ser vice (OOS) LED OK LED HD Hot-s wap L ...

  • Sun Microsystems CP32x0 - page 28

    1-12 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 ■ Netra CP3220 Board Product Notes (820-1980) ■ Netra CP3250 Board Product Notes (820-5194) ■ Netra CP3260 Board Product Notes (820-0455) ...

  • Sun Microsystems CP32x0 - page 29

    Chapter 1 Overview 1-13 1.10 Part Number , Serial Number , and FC Addr ess Labels The AR TM-HD serial number , part number , FibreChannel (FC) address are printed on stickers located on the module. For proper identification of the AR TM-HD, find the Sun Microsystems bar code labels on the module. The barcode labels pr ovide the following informatio ...

  • Sun Microsystems CP32x0 - page 30

    1-14 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 ...

  • Sun Microsystems CP32x0 - page 31

    2-1 CHAPTER 2 Installation and Service This chapter contains the procedur es for installing and removing the Netra CP32x0 SAS Storage Advanced Rear T ransition Module HD (ARTM-HD). This chapter contains the following sections: ■ Section 2.1, “About Installing and Removing the ARTM-HD” on page 2-2 ■ Section 2.2, “Installing the AR TM-HD” ...

  • Sun Microsystems CP32x0 - page 32

    2-2 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 2.1 About Installing and Removing the AR TM-HD The AR TM-HD can be installed into an A TCA shelf (chassis) with a midplane made for front and r ear board installations ( FIGURE 2-1 ). The module must be installed in the slot directly behind the Netra A T ...

  • Sun Microsystems CP32x0 - page 33

    Chapter 2 Installation and Ser vice 2-3 FIGURE 2-1 Installing the Blade Server and AR TM-HD Into the A TCA Shelf ...

  • Sun Microsystems CP32x0 - page 34

    2-4 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 2.2 Installing the AR TM-HD The AR TM-HD must be used with a Netra A TCA node board for rear I/O access. The AR TM-HD enables access to the network, to a boot device, and to a console terminal. Note – The AR TM-HD and the corresponding Netra blade serv ...

  • Sun Microsystems CP32x0 - page 35

    Chapter 2 Installation and Ser vice 2-5 FIGURE 2-2 Injector/Ejector Latch and Locking Scr ew 5. Hold the bottom disk cage with one hand and top injector/ejector latch with the other hand, as shown in FIGURE 2-3 . Note – The following steps apply regardless of how many AR TMs are in the chassis, as long as there is an available slot for the AR TM ...

  • Sun Microsystems CP32x0 - page 36

    2-6 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 FIGURE 2-3 Holding the AR TM-HD During Installation 6. Carefully align the top and bottom edges of the module with the guides in the appropriate slot. It might be helpful to look into the enclosure to verify correct alignment of the rails in the guides. ...

  • Sun Microsystems CP32x0 - page 37

    Chapter 2 Installation and Ser vice 2-7 7. T aking care to keep the module aligned in the guides, carefully insert the module by simultaneously pressing the bottom disk cage and top injector/ejector latch, which is extended fully open. FIGURE 2-4 Inserting the AR TM-HD 8. Slide the module in as far as possible and while maintaining pressure on the ...

  • Sun Microsystems CP32x0 - page 38

    2-8 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 9. T ighten the module retention screws to ensure that the module is secured into the shelf. If the module is inserted properly , the hotswap switch is activated. The blue Hot-swap LED will blink, then the green OK LED lights. 10. Install the blade serve ...

  • Sun Microsystems CP32x0 - page 39

    Chapter 2 Installation and Ser vice 2-9 2.3 Removing the AR TM-HD Caution – Power to the AR TM-HD must be off before the module can be safely removed. Removing the AR TM-HD without properly removing power can cause data loss on hard disk drives installed in the AR TM-HD. 1. Shut down any operating system accessing the AR TM-HD or its companion bo ...

  • Sun Microsystems CP32x0 - page 40

    2-10 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 FIGURE 2-5 Removing the AR TM-HD 6. If the slot is to remain empty , install a f iller panel in the slot. 7. Reinstall the blade server , if necessary . ARTM-HD ...

  • Sun Microsystems CP32x0 - page 41

    Chapter 2 Installation and Ser vice 2-11 2.4 Installing a Har d Disk Drive 1. Open the HD latch by pressing the button on the face of the drive. 2. Insert the drive into the appropriate drive bay until the latch closes and the drive fully engages with the connectors. 2.5 Removing a Har d Disk Drive 1. Unmount any f ile systems using the HD. 2. Loca ...

  • Sun Microsystems CP32x0 - page 42

    2-12 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 2.6 Changing the OOS LED Color The color of the Out-of-service (OOS) LED can be set to red or amber by moving jumper JU1 to the appropriate position. Setting the jumper to the P1/P2 position makes the OOS LED appear red. Setting the jumper to the P2/P3 ...

  • Sun Microsystems CP32x0 - page 43

    Chapter 2 Installation and Ser vice 2-13 FIGURE 2-7 Jumper setting for amber OOS LED (P2/P3) 4. Reinstall the AR TM-HD. See Section 2.2, “Installing the AR TM-HD” on page 2-4 . ...

  • Sun Microsystems CP32x0 - page 44

    2-14 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 ...

  • Sun Microsystems CP32x0 - page 45

    3-1 CHAPTER 3 Disk Management This chapter describes the disk management and BIOS configuration software. This chapter contains the following sections: ■ Section 3.1, “RAID Support” on page 3-2 ■ Section 3.2, “SAS BIOS Overview” on page 3-2 ■ Section 3.3, “Starting the SAS BIOS Configuration Utility” on page 3-3 ■ Section 3.4, ? ...

  • Sun Microsystems CP32x0 - page 46

    3-2 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 3.1 RAID Support The LSISAS1068e controller supports the Integrated RAID har dware solution, which is a highly integrated, low-cost RAID solution. It is designed for systems requiring redundancy and high availability , but not requiring a full-featured R ...

  • Sun Microsystems CP32x0 - page 47

    Chapter 3 Disk Management 3-3 3.3 Starting the SAS BIOS Conf iguration Utility If you have SAS BIOS version 6.x.x with the Fusion-MPT SAS BIOS Configuration Utility , you can change the default configuration of the SAS host adapters. Y ou may decide to change these default values if there is a conflict between device settings or if you need to opti ...

  • Sun Microsystems CP32x0 - page 48

    3-4 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 3.4 Cr eating a RAID 0 V olume A RAID 0 volume, also referr ed to as Integrated Striping (IS), offers the ability to stripe data across multiple har d disks. This can increase storage capacity and performance by combining multiple disks into one logical ...

  • Sun Microsystems CP32x0 - page 49

    Chapter 3 Disk Management 3-5 Note – Once the number of disks in a RAID volume is set, it cannot be changed. 5. When the volume has been fully conf igured, press C and select Save Changes, then exit this menu to commit the changes. The Configuration Utility will pause while the array is being created. 3.5 Cr eating a RAID 1 V olume A RAID 1 volum ...

  • Sun Microsystems CP32x0 - page 50

    3-6 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 7. When the volume has been fully conf igured, press C and select Save Changes, then exit this menu to commit the changes. The Configuration Utility will pause while the array is being created. Note – RAID 1 provides pr otection against the failure of ...

  • Sun Microsystems CP32x0 - page 51

    Chapter 3 Disk Management 3-7 As disks are added the Array Size f ield will change to ref lect the size of the new volume. There ar e several limitations when creating a RAID 1E volume: ■ All disks must be SAS (with SMAR T support). ■ Disks must have 512-byte blocks and must not have removable media. ■ There must be thr ee drives in a valid v ...

  • Sun Microsystems CP32x0 - page 52

    3-8 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 3.8 Synchr onizing an Array Synchronizing an array means that the f irmware synchronizes the data on the secondary disk(s) with the data on the primary disk of the mirror . Follow these steps to start a synchronization for a RAID 1 volume. 1. Select Sync ...

  • Sun Microsystems CP32x0 - page 53

    Chapter 3 Disk Management 3-9 3.10 Deleting an Array Caution – Before deleting an array , back up all data on the array that you want to keep. Follow these steps to delete a selected array . 1. Select Delete Array . 2. Press Y to delete the array , or press N to abandon the deletion. After a pause, the firmwar e deletes the array . Note – Once ...

  • Sun Microsystems CP32x0 - page 54

    3-10 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 ...

  • Sun Microsystems CP32x0 - page 55

    4-1 CHAPTER 4 Specif ications and Connectors This chapter provides the specif ications and connector pinouts for the ARTM-HD. This chapter contains the following sections: ■ Section 4.1, “Specifications for the AR TM-HD” on page 4-2 ■ Section 4.2, “Hardwar e Descriptions” on page 4-3 ■ Section 4.3, “Connectors and Pin Assignments” ...

  • Sun Microsystems CP32x0 - page 56

    4-2 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 4.1 Specif ications for the AR TM-HD This section provides mechanical, electrical, environmental, and other r elevant specifications for the AR TM-HD. 4.1.1 Physical Dimensions The AR TM-HD is a 6U (233.35 mm) height board with 80 mm in depth for standar ...

  • Sun Microsystems CP32x0 - page 57

    Chapter 4 Specifications and Connectors 4-3 4.2 Har dware Descriptions 4.2.1 Ethernet Management Port The AR TM-HD provides one 10/100/1000 MBASE-T ethernet management port with an RJ-45 connector equipped with LEDs. 4.2.2 Inf inband-style Connectors The AR TM-HD provides two (primary and secondary) Infinband-style SAS connectors, with jack screws, ...

  • Sun Microsystems CP32x0 - page 58

    4-4 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 4.2.6 FRU PROM The AR TM-HD contains an IPMI FRU Prom compatible with the A TCA specifications. 4.3 Connectors and Pin Assignments FIGURE 4-1 shows the location of the connectors. FIGURE 4-1 Netra CP32x0 AR TM-HD Connectors 1 - Serial port 5 - Hard disk ...

  • Sun Microsystems CP32x0 - page 59

    Chapter 4 Specifications and Connectors 4-5 4.3.1 I/O Connectors This section lists the pins and signal names of the I/O faceplate connectors on the AR TM-HD. The faceplate has the following connectors: ■ One 10/100/1000 BASE-T Ethernet management port (RJ-45) ■ One serial ports (RS232) ■ T wo External SAS connectors (Infinband style) 4.3.1.1 ...

  • Sun Microsystems CP32x0 - page 60

    4-6 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 4.3.1.2 Serial Port The serial port connector is an RJ45 connector . FIGURE 4-3 shows a serial port connector . FIGURE 4-3 Serial Port Connector T ABLE 4-2 gives the serial port connector pin assignments. T ABLE 4-2 Serial Port Connector Pin Assignments ...

  • Sun Microsystems CP32x0 - page 61

    Chapter 4 Specifications and Connectors 4-7 4.3.1.3 SAS Connectors The AR TM-HD provides two Serial Attached SCSI (SAS) ports using an Infinband-style connector . FIGURE 4-4 SAS Connectors T ABLE 4-3 External SAS Connector Pin Assignments Pin Function S1 RX0+ S2 RX0- S3 RX1+ S4 RX1- S5 RX2+ S6 RX2- S7 RX3+ S8 RX3- S9 TX3- S10 TX3+ S1 1 TX2- S12 TX2 ...

  • Sun Microsystems CP32x0 - page 62

    4-8 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 4.3.2 Zone 3 Connectors All the I/O connections for rear access ar e provided by the Netra blade server through the Zone 3 connectors. The Zone 3 connectors are P31, P32, and P33. The Zone 3 connectors are shown in FIGURE 4-5 . Note – The letters TX in ...

  • Sun Microsystems CP32x0 - page 63

    Chapter 4 Specifications and Connectors 4-9 T ABLE 4-4 lists the Zone 3, J31 connector pinouts. T ABLE 4-5 lists the Zone 3, J32 connector pinouts. T ABLE 4-4 J31 Connector Pin Assignments Row Interface A B C D E F 1 AMC1 EO Ports TX1_13+ TX1_13- RX1_12+ RX1_12- TX1_12+ TX1_12- 2 RX1_14+ RX1_14- TX1_14+ TX1_14- RX1_13+ RX1_13- 3 TX1_17+ TX1_17- RX1 ...

  • Sun Microsystems CP32x0 - page 64

    4-10 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009 T ABLE 4-6 lists the Zone 3, J33 connector pinouts. T ABLE 4-6 J33 Connector Pin Assignments Row Interface A B C D E F 1 PCIe x8 Lane PETx0+ PETx0- PERx0+ PERx0- FCLKA+ FCLKA- 2 PETx1+ PETx1- PERx1+ PERx1- TCLKA+ TCLKA- 3 PETx2+ PETx2- PERx2+ PERx2- TCL ...

  • Sun Microsystems CP32x0 - page 65

    Index-1 Index A A TCA shelf, 2-2 B BIOS SAS RAID, 3-2 C compliance specifications, 4-2 compliance, PICMG, 1-3 configurations, I/O configurations, 1-7 connectors Ethernet, 4-5 Zone 3, 4-8 E electrical requir ements, 4-2 environmental specifications, 4-2 Ethernet, RJ-45 connectors, 4-5 F features, 1-2 FIGURE, 4-6 Fusion-MPT SAS BIOS, See SAS BIOS ...

  • Sun Microsystems CP32x0 - page 66

    Index-2 Netra CP32x0 SAS Storage Adv anced Rear T ransition Module HD User’ s Guide • January 2009 serial interface, 4-3 serial port pinouts, 4-6 serial ports, 4-6 software support, 1-12 specifications, 1-3, 4-2 compliance, 4-2 electrical requir ements, 4-2 environmental, 4-2 ...

Produzent Sun Microsystems Kategorie Computer Drive

Dokumente, die wir vom Produzenten des Geräts Sun Microsystems CP32x0 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Sun Microsystems
- Bedienungsanleitungen CP32x0
- Produktkarten Sun Microsystems
- Informationsbroschüren
- oder Energieetiketten Sun Microsystems CP32x0
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Sun Microsystems CP32x0.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Sun Microsystems CP32x0, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Sun Microsystems CP32x0. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Sun Microsystems CP32x0 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Sun Microsystems CP32x0, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Sun Microsystems CP32x0 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Sun Microsystems CP32x0 verständlich ist.

Eine gänzliche Bedienungsanleitung von Sun Microsystems sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Sun Microsystems CP32x0 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Sun Microsystems CP32x0 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Sun Microsystems CP32x0, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Sun Microsystems CP32x0 - die uns die ersten Schritte während der Nutzung von Sun Microsystems CP32x0 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Sun Microsystems CP32x0 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Sun Microsystems CP32x0 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Sun Microsystems CP32x0?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Sun Microsystems CP32x0 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Sun Microsystems CP32x0 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)