Bedienungsanleitung Brother DCP-4020C

227 Seiten 5.62 mb

Download

Zur Seite of 227

Prev Next

Summary

Brother DCP-4020C - page 1

DCP-4020C USER ’S GUIDE ...
Brother DCP-4020C - page 2

i Compilation and Publication Notice Under the supervision of Brother Industries Ltd., this man ual has been compiled and published, coverin g the latest product descriptions and specifications. The contents of this man ual and the specifications of this product are subject to change without no tice. Brother reserves the right to make change s with ...
Brother DCP-4020C - page 3

ii ...
Brother DCP-4020C - page 4

iii Safety Precautions To Use the DCP Safely Save these instructions for later reference. WARNING There are high vol tage electrodes inside the DCP. Before you clean the DCP or clear a paper jam, make sure you have unplugged the power cord from the pow e r out l et . Do not handle the plug with wet hands. Doing this might cause an electrical shock. ...
Brother DCP-4020C - page 5

iv WARNING ■ Install equipment with a power cord near a socket-outlet that is easily accessible. Caution ■ Lightning and power surges can damage this product ! We recommend that you use a quality surge protection device on the AC power line, or unplug the line during a lightning storm. ■ Do not use this product near ap plia nce s tha t use wa ...
Brother DCP-4020C - page 6

v Choosing a Location Place your DCP on a flat, stable surface that is free of vibration an d shocks, such as a desk. Put the DCP near a standard g rounded power outlet. Choose a location wh ere the temperature remains between 10° and 35°C. Caution ■ Avoid placing your DCP in a high-traffic area. ■ Do not place near heaters, air c ondit ioner ...
Brother DCP-4020C - page 7

vi Table of Contents 1 Introduction ............ ................ ................ ................ .............. 1-1 Using this Guide .............. ................ ............. ................ .... 1-1 Finding information ................. ................ ............. ....... 1-1 Symbols used in this Guide ................ ................. ...
Brother DCP-4020C - page 8

vii 5 Making copies ............ ................. ................ ................ ......... 5-1 Using the DCP as a copier .. .................... ................... ...... 5-1 Single or multiple copies ....... ...... ................ ................ 5-2 Out of memory message ............ .... ... ............. ... ... ...... 5-2 Using Copy Opt ...
Brother DCP-4020C - page 9

viii 7 Using the DCP as a printer ... ................ ................ .............. 7-1 Using the Brother DCP-4020C print er driver .................... 7-1 Features ................ ................ ............. ................ .............. 7-1 Choosing the right type of paper ........................ .............. 7-2 How to print your do ...
Brother DCP-4020C - page 10

ix 9 How to scan using Window s ® .................... ................ ......... 9-1 Scanning a document (For Windows ® 98/98SE/Me and 2000 Professional) ...... ... ................ ............. ... .... ............ 9-2 TWAIN compliant ............... ................ ............. ... ... ...... 9-2 How to access the Scanner .. .............. ...
Brother DCP-4020C - page 11

x 10 Using the Brother Control Center for Windows ® 98/ 98SE/Me/2000 Professional 10-1 Brother MFL-Pro Control Center ........ ................ ............ 10-1 AutoLoad the Brother Control Center . .... ... ............... 10-2 How to turn off AutoLoad . ................ ................ ......... 10-2 Brother Control Center features ... ... ... ...
Brother DCP-4020C - page 12

xiii Sca n t o E-m ai l .... .. .. ... .. .. ..... ... .. .. ... .. ..... .. .. ... .. ... .. ..... .. .. .. 11-1 8 Fil e a tt ac hme n ts .. .. .. ..... ... .. .. ... .. ..... .. .. ... .. ... .. ..... .. .. .. 11-2 0 Scanner s ett ing s . .. .. .. . .... . ...... . .... .. . ...... . ..... .... .. . ...... . 11-21 Scan to OCR (Wo rd P rocess ing ...
Brother DCP-4020C - page 13

xii Using ArcSoft ® PhotoPrinter ® 4 ............. ... ............. .... ... 13-18 Overview of basic steps ............. ................ ............. 13-18 14 Important information .............. ................... .................... .. 14-1 Important safety instructions ............ ................... ............ 14-1 Trademarks ........ ...
Brother DCP-4020C - page 14

INTRODUC TION 1 - 1 1 Using this Guide Thank you for buying a Brother DCP. Th is DCP is simple to use, with LCD screen instructions to guide you through programming it . You can make the most of your DCP by taking a few minutes to read this Guide. Finding information All the chapter headings and sub-headi ngs are listed in the Table of Contents. Yo ...
Brother DCP-4020C - page 15

1 - 2 INTRODUCTION DCP Part Names and Functions ■ Front view No. Name Descript ion 1 Output Paper Support Extension Pull the paper su pp ort extension towa rd s you, doing so prevents th e paper from falling off the outp ut paper support. 2 Output Paper Support The printed paper exits the machine and stacks onto the Output Paper Support. 3 PhotoC ...
Brother DCP-4020C - page 16

INTRODUC TION 1 - 3 ■ Rear View No. Name Descript ion 11 USB Interface Connector Conne ct the USB Cable here. 11 USB Interface Connector ...
Brother DCP-4020C - page 17

1 - 4 INTRODUCTION ■ Internal View (Document Cover Open) No. Name Descript ion 12 Scanner Glass Put the original to be scanned here. 13 Document Guidelines Use to center the original on the scan ner glass. 14 Document Cover Open to p lace the original on the scanner glass. 15 White Film For good quality copying and sca nning, the white film needs ...
Brother DCP-4020C - page 18

INTRODUC TION 1 - 5 ■ Internal View (Scanner Cover Open) No. Name Descript ion 16 Machine Window Use to remove small paper jammed insid e the DCP without pulling the tube. 17 Scanner Cover O pe n to install ink cartridges or remove jammed paper. 18 Tube These tubes transfer the ink to the print heads. Pulling the tube can cause damage to th e DCP ...
Brother DCP-4020C - page 19

1 - 6 INTRODUCTION DCP-4020C control panel overview 3 2 1 4 1 On/Off Let’s you turn the DCP on or off. 2 Liquid Crystal Disp lay (LCD) Displays messages on the screen to help you to set up and use your DCP. 3 Navigatio n ke y : Menu/Set Lets you access the Menu to program and store yo ur settings in the DCP. Press to scroll forward or backward to ...
Brother DCP-4020C - page 20

INTRODUC TION 1 - 7 6 5 7 8 4 PhotoCapture Centre ™ keys: Print Index Press to print the Index of the Media Card (Thumbnails). Options You can quickly and easily select temporary settings for PhotoCapture Center ™ . Print Image Press to print an in dividual image. 5 Numeric keys Use the numeric keys to enter the number of multiple co pies (99 m ...
Brother DCP-4020C - page 21

2 - 1 PAPER 2 About paper The print quality of your document can be affected by the kind of paper you use in the DCP. To ensure the best print quality f o r the settings you’ve chosen, always set the Paper Type to match the type of paper you load. You can use plain paper, inkjet paper (coated paper), glossy paper, transparencies and envelopes. We ...
Brother DCP-4020C - page 22

PAPER 2 - 2 Recommended paper Paper capacity of the Paper Tray The output quality depend s on the paper type and paper brand. Visit us at http://solu tions.brother.com and ch eck the latest recommendations for paper that can be used with the DCP-4020C. Paper Type Paper Size Number of sheets Plain Paper (Cut Sheet) A4, A5, Letter, Executive 100 of 8 ...
Brother DCP-4020C - page 23

2 - 3 PAPER Paper specifications for the Paper Tray Paper capacity of the Ou tput Paper Support Cut Sheet Paper Weight Plain Paper / Inkjet Paper: 64 to 120 g/m 2 Glossy Paper: Up to 150 g/m 2 Post card: Up to 170 g/m 2 Index card: Up to 120 g/m 2 Thickness Plain Paper / Inkjet Paper: 0.08 to 0.15 mm Glossy Paper: Up to 0.18 mm Envelopes: Up to 0.5 ...
Brother DCP-4020C - page 24

PAPER 2 - 4 Do not use paper or envelopes: ■ that are damaged, curled, wrin kled, or irregularly shaped ■ that are extremely shiny or highly textured ■ that were previously printed by a printer ■ that cannot be arranged unif ormly when stacked ■ that are made with a short grain Do not use envelopes: ■ that are of a baggy constructio n ? ...
Brother DCP-4020C - page 25

2 - 5 PAPER Printable area The printable area depends on the settings in the applicatio n you are using. The figures below show the unprinta ble areas on cut sheet paper and envelopes. *1 When you set the Near Edge feature to ON in the printer driver. Paper Paper Size 1 Top 2 Bottom 3 Left 4 Right Cut Sheet A4, Letter Printer 3 mm (0.5 m m)* 1 3 mm ...
Brother DCP-4020C - page 26

PAPER 2 - 6 How to load paper and envelopes To load paper or other media 1 Fan the stack of paper well to avoid pap er jams and mis-feeds. 2 Unfold the paper support, an d press and slide the paper guide to fit the paper width. Paper Support Paper Guide ...
Brother DCP-4020C - page 27

2 - 7 PAPER 3 Gently insert the paper. Make sure the print side is toward s you and t he p aper is below the maximum paper mark. To load glossy paper 1 Fan the stack of glossy paper well. 2 Put a sheet of plain paper in the paper tray first, and then put the stack of glossy paper on top of it. If the glossy sheets are ‘double-feeding’, put one ...
Brother DCP-4020C - page 28

PAPER 2 - 8 To load envelopes 1 Before loading, press the corners and sides of the envelopes to make them as flat as possible. 2 Press and slide the p aper guide to fit the width of the envelopes. Insert them into the pa per tray with the address side toward you and pointed in the direction below. If the envelopes are ‘double-feed ing’, put o n ...
Brother DCP-4020C - page 29

3 - 1 ON-SCREEN PROGRAMMING 3 User-friendly programming Your DCP is designed to be easy to use with LCD on-screen programming using the navigation key. User-friendly programming helps you take full advantage of al l the menu selections your DCP has to offer. Since your programming is done on the LCD, we have created step-by-step on screen instructi ...
Brother DCP-4020C - page 30

ON-SCREEN PROGRAMMING 3 - 2 Navigation key You can access the menu mode by p ressing Menu/Set . When you enter the menu, the LCD scrolls. Press 1 for General Se tup menu — OR — Press 2 for Copy menu — OR — Press 3 for PhotoCapture menu — OR — Press 4 for Maintenance menu — OR — Press 5 for Print Reports menu — OR — You can scrol ...
Brother DCP-4020C - page 31

3 - 3 ON-SCREEN PROGRAMMING Press to scroll to your next menu selection. Press Menu/Set . When you finish setting a n option, the LCD shows ACCEPTED . Use to scroll backward if you passed your choices or want to save keystrokes. The current setting is always the option witho ut a “?”. ...
Brother DCP-4020C - page 32

ON-SCREEN PROGRAMMING 3 - 4 Main Menu Submenu Menu Selections Options Descriptions Page 1 . GENERAL SETUP 1 . PAPER TYPE — PLAIN INKJET GLOSSY ( 4-COLOUR or 3-COLOUR ) TRANSPARENCY Sets the type of paper in the paper tray. 4-1 2 . DATE/TIME — — Sets the date an d time. 4-2 3 . VOLUME 1 . BEEPER HIGH MED LOW OFF Adjusts the volume level of the ...
Brother DCP-4020C - page 33

3 - 5 ON-SCREEN PROGRAMMING Main Menu Submenu Menu Selections Options Descriptions Page 2 . COPY 1 . QUALITY — NORMAL BEST FAST Selects the copy quality. 5-12 2 . BRIGHTNESS —- + - + - + - + - + Adjusts the brightness 5-12 3 . CONTRAST —- + - + - + - + - + Adjusts the cont rast. 5-12 4 . COLOUR ADJUST 1 . RED R: - + R: - + R: - + R: - + R: - ...
Brother DCP-4020C - page 34

ON-SCREEN PROGRAMMING 3 - 6 Main Menu Submenu Menu Selections Options Descriptions Page 3 . PHOTOCAP TURE 1 . PRINT QUALITY — NORMAL FINE PHOTO Selects the print quality. 6-17 2 . PRINT SIZE — (13 X 9 CM) (15 X 10 CM) (18 X 13 CM) (20 X 25 CM) Selects the print size 6-17 3 . BRIGHTNESS —- + - + - + - + - + Adjusts the brightness. 6-17 4 . CON ...
Brother DCP-4020C - page 35

3 - 7 ON-SCREEN PROGRAMMING Main Menu Submenu Menu Selections Options Descriptions Page 3 . PHOTOCAPTU RE (Continued) 6 . SCAN TO CARD — PDF JPEG Selects the def ault file format for colour scanning. 9-19 4 . MAINTENANCE 1 . TEST PRINT — — You can pr int a test sample page to check the print quality and adjust th e Vertical Alignment. 15-8 2 ...
Brother DCP-4020C - page 36

INITIAL SETUP 4 - 1 4 Getting started Setting the Paper Type To get the best print quality, set the DCP for the type of paper you are using. 1 Press Menu/Set , 1 , 1 . 2 Press to select PLA IN , INKJET , GLOSSY or TRA NSPARENCY . Press Menu/Set . 3 If you selected GLOSSY , press to select GLOSSY:4-COLOUR or GLOSSY:3-COLOU R . Press Menu/Set . 4 Pre ...
Brother DCP-4020C - page 37

4 - 2 INITIAL SETUP Setting the Date and Time If there is a power failure, you may have to reset the date and time. All other settings will not be affected. 1 Press Menu/Set , 1 , 2 . 2 Enter the last two digits of the year. Press Menu/Set . 3 Enter two digits for the month. Press Menu/Set . (For example, enter 09 for September, or 10 for October.) ...
Brother DCP-4020C - page 38

INITIAL SETUP 4 - 3 Setting the Beeper Volume You can change the beep er volume. When the beeper is on , the DCP beeps every time you press a key or make a mistake. 1 Press Menu/Set , 1 , 3 , 1 . ( LOW , MED , HIGH or OFF ) 2 Press to select your option. 3 Press Menu/Set . 4 Press Stop/Exit . Setting the LCD Contrast You can adjust the LCD contrast ...
Brother DCP-4020C - page 39

4 - 4 INITIAL SETUP Power Save Setting Power Save Mode reduces power consumption by turning off the CPU etc. inside the machine. If Power Save Mode is switche d ON , when the machine is idle fo r appr oximately 10 minutes, it drops into power save mode automatica lly. The machine will display SLE EP instead of the date and time. 1 Press Menu/Set , ...
Brother DCP-4020C - page 40

INITIAL SETUP 4 - 5 Printing reports Printing reports Two reports are available: To print a report 1 Press Menu/Set , 5 . 2 Press to select the report you want. Press Menu/Set . — OR — Enter the number of the report you wan t to print. For example, press 1 to print the Help List. 3 Press Mono Copy or Colour Copy . Prints the Help List so you ca ...
Brother DCP-4020C - page 41

5 - 1 MAKING COPIES 5 Using the DCP as a copier Your DCP allows you to make high-qualit y photocopies and transparencies. Copies ca n be in black and white or full colour. Always make sure you have paper in the pape r tray before making copies. Do not pull on the paper while co pying is in progress. Making copies Copy Keys Copy Options Key ...
Brother DCP-4020C - page 42

MAKING COPIES 5 - 2 Single or multiple co pies You can make multi ple copies usin g the scanner glass. Use the Copy Options key to choose mo re settings . (See Using Copy Options key (Temporary Settings) on page 5-3.) 1 Lift the Document Cover. 2 Using the document guidelines on th e left, cen ter the original face down on the scanner glass and clo ...
Brother DCP-4020C - page 43

5 - 3 MAKING COPIES Using Copy Options key (Temporary Settings) When you want to change the setting s only for the next copy, use the Copy Options key. You can use different combinations. Fo r example, if you want to copy a photograph on glossy pap er with best print quality, press Copy Options to select BEST in the Quality setting and GLOSSY in th ...
Brother DCP-4020C - page 44

MAKING COPIES 5 - 4 After you finish c hoosing settings using the Copy Options key, the LCD shows: Press to select more settings. — OR — Press Mono Copy or Colour Copy if you’re finished choosing settings. Press Copy Options Menu Selectio n s Options Factory Setting Page QUALITY FAST / NORMAL / BEST NO RMAL 5-5 ENLARGE/REDUCE 25% / 50% / 78% ...
Brother DCP-4020C - page 45

5 - 5 MAKING COPIES No. of Copies 1 Place the original face down on the scanner glass. 2 Press Copy Options and to select NO. OF COPIES:01 . 3 Press the number of copies using the dial pad. Press Menu/Set . To start copying now, press Mono Copy or Colour Copy . — OR — Press for more settings. Quality 1 Place the original face down on the scanne ...
Brother DCP-4020C - page 46

MAKING COPIES 5 - 6 Enlarge/Reduce You can select the following enla rgement or reduction ratios. MANUAL allows you to enter a ratio from 25% to 400% . 1 Place the original face down on the scanner glass. 2 Press Copy Options and to select ENLARGE/REDUCE . Press Menu/Set . 3 Press to select the enlargement or reduction ratio you want. Press Menu/Se ...
Brother DCP-4020C - page 47

5 - 7 MAKING COPIES Paper Type You can change the paper t ype only for the next copy. Select the type of media that you are using to get the best print qualit y. 1 Place the original face down on the scanner glass. 2 Press Copy Options and to select PAPER TYPE . Press Menu/Set . 3 Press to select the type of paper you are u sing ( PLAIN , INKJET , ...
Brother DCP-4020C - page 48

MAKING COPIES 5 - 8 Paper Size You can change the paper size setting only for the next copy. 1 Place the original face down on the scanner glass. 2 Press Copy Options and to select PAPER SIZE . Press Menu/Set . 3 Press to select the size of paper you are using ( A4 or 10(W) × 15(H)CM ). Press Menu/Set . 4 Press Mono Copy or Colour Copy . — OR ? ...
Brother DCP-4020C - page 49

5 - 9 MAKING COPIES Page Layout You can save paper by copying either two or four pages ont o one page, or you can make a poster size copy. 1 Place the original face down on the scanner glass. 2 Press Copy Options and to select PAGE LAYOUT . Press Menu/Set . 3 Press to select 2 IN 1 , 4 IN 1 , POSTER (or OFF (1 IN 1) ). Press Menu/Set . 4 Press Mono ...
Brother DCP-4020C - page 50

MAKING COPIES 5 - 10 4 in 1 Poster You can make a poster size copy of a photograph. For 2 in 1 or 4 in 1 copies, you cannot change the enlargement or reduction ratio or print on glossy p aper. For colour 2 in 1 or 4 in 1 co pies, you can use A4 size p aper. You cannot make more than one cop y. For poster copies, yo u cannot make more than one copy ...
Brother DCP-4020C - page 51

5 - 11 MAKING COPIES Changing the default copy settings You can adjust the copy se ttings tha t are shown in the chart. These settings will stay until you change th em again. Submenu Menu Selections Op tions Factory Settings 1 . QUALITY — NORMAL BEST FAST NORMAL 2 . BRIGHTNESS —- + - + - + - + - + - + 3 . CONTRAST —- + - + - + - + - + - + 4 . ...
Brother DCP-4020C - page 52

MAKING COPIES 5 - 12 Copy Quality 1 Press Menu/Set , 2 , 1 . 2 Press to select NORMAL , BEST or FAST . Press Menu/Set . 3 Press Stop/Exit . Brightness 1 Press Menu/Set , 2 , 2 . 2 Press to make a lighter copy. — OR — Press to make a darker copy. Press Menu/Set . 3 Press Stop/Exit . Contrast You can change the contrast to help an imag e look sha ...
Brother DCP-4020C - page 53

5 - 13 MAKING COPIES Colour Adjustment 1 Press Menu/Set , 2 , 4 . 2 Press to select RED , GREEN or BLUE . Press Menu/Set . 3 Press to increase the colour saturation. — OR — Press to decrease the colour satura tion. Press Menu/Set . 4 Return to Step 2 to select the next colour. — OR — Press Stop/Exit . COPY 4.COLOUR ADJUST ...
Brother DCP-4020C - page 54

MAKING COPIES 5 - 14 Legal limitations Colour reproductions of certain documents are illegal and may result in either criminal or civil liability . This memorandum is intended to b e a guide rather than a comp lete listing of every possible prohibition. In case of doubt, we suggest that yo u check with counsel as to any particular questionable do c ...
Brother DCP-4020C - page 55

6 - 1 WALK-UP PHOTOCAPTURE CENTER ™ 6 Introduction Your Brother DCP includes three media drives (slots) to u se with popular digital camera media: CompactFlash ® , SmartMedia ® and Memory Stick ® . The PhotoCapture Center ™ feature lets you print digital photos from your digital camera at high resolution to get photo quality printing. PhotoC ...
Brother DCP-4020C - page 56

WALK-UP PHOTOCAPTURE CENTER ™ 6 - 2 Basic flow 1 Insert the media card firmly into th e media drive (slot). (See Getting started on page 6-3.) 2 Print the index (Thumbnails) of all the images on your media card by pressing Print Index . The ima ges will be numbered. (See Printing the Index (Thumbnails) on page 6-6.) 3 To print the images, press P ...
Brother DCP-4020C - page 57

6 - 3 WALK-UP PHOTOCAPTURE CENTER ™ Getting started The left slot is for a CompactFlash ® Card, the middle slot is for a Memory Stick ® and the right is for a SmartMedia ® Card. Firmly insert the card into the appropr iate slot. There are separate slots on your DCP, for a Co mpactFlash ® card, a SmartMedia ® card and a Memory Stick ® . Use ...
Brother DCP-4020C - page 58

WALK-UP PHOTOCAPTURE CENTER ™ 6 - 4 Media Card Indicator Lights: ■ LED light is ON, the media card is inserted prop erly. ■ LED is OFF, the media card is not prop erly inserted. ■ LED is BLINKING, the media card is being read or written to. Do NOT unplug the power cord or remove the media card from the media drive (slot ) while the DCP is r ...
Brother DCP-4020C - page 59

6 - 5 WALK-UP PHOTOCAPTURE CENTER ™ The DCP can only read one Media card a t a time so do not insert more than one card. The settings that you want to use with the card will be kept until you take out the media card from the drive (slot), print images or press Stop/Exit . 1 Insert the media card f irmly into the media drive (slot). 2 When you ins ...
Brother DCP-4020C - page 60

WALK-UP PHOTOCAPTURE CENTER ™ 6 - 6 Printing the Index (Thumbnails) The PhotoCapture Center ™ assigns numbers for images (such as No.1, No.2, No.3, and so on). It does not recognize any other numbers or file names tha t your digital camera or PC have used to identify the pictures. You can print a thumbnail page (Index page with 6 or 4 image s p ...
Brother DCP-4020C - page 61

6 - 7 WALK-UP PHOTOCAPTURE CENTER ™ Printing images Before you can print an individua l image, you have to kn ow the image number. 1 Make sure you inserted the me dia card. (See page 6-3.) Press Print Image . 2 Use the dial pad to enter the image number that you want to be printed from the Index page (Thumbnails). Press Menu/Set . Repeat this ste ...
Brother DCP-4020C - page 62

WALK-UP PHOTOCAPTURE CENTER ™ 6 - 8 Changing the settings for printing images You can change the settings for the number of Copies, Pap er Type, Paper & Print Size, Print Quality, Brightness and Colour Enhancement only for the next prin ted image. Menu Selections Options (1) Options (2) Factory Setting Page NO. OF COPIES: XX — 01-99 01 6-9 ...
Brother DCP-4020C - page 63

6 - 9 WALK-UP PHOTOCAPTURE CENTER ™ Menu selections Number of Copies 5 Press to select NO. OF COPIES:01 . Press Menu/Set . 6 Use the dial pad to enter the number o f copies you want. Press Menu/Set . 7 Press Colour Copy to print. — OR — Press for more settings. Paper Type 5 Press to select PAPER TYPE . Press Menu/Set . 6 Press to select the t ...
Brother DCP-4020C - page 64

WALK-UP PHOTOCAPTURE CENTER ™ 6 - 10 Paper and Print Size 5 Press to select PAPER&PRINT SIZE . Press Menu/Set . 6 Press to select the size of the pap er you are using ( A4 or 10(W)X15(H)CM ). Press Menu/Set . 7 If you select A4 , press to se lect the print size Press Menu/Set , and go to St ep 11. Printed Position — OR — If you selecte d ...
Brother DCP-4020C - page 65

6 - 11 WALK-UP PHOTOCAPTURE CENTER ™ 8 Load the post card with the top e dge down and print side is towards you. 9 Check the printed thumbnail ima ge on the index sheet. Some images taken by some ca meras h ave the orientation information. Print side Index Landscape image Portrait image ...
Brother DCP-4020C - page 66

WALK-UP PHOTOCAPTURE CENTER ™ 6 - 12 10 Press to select LANDSCAPE or PORTRAIT . Press Menu/Set . The result of the output (10 (W) x 15 (H) cm) 11 Press Colour Copy to print. — OR — Press for more settings. LANDSCAPE PORTRAIT Portrait Image Landscape Image ...
Brother DCP-4020C - page 67

6 - 13 WALK-UP PHOTOCAPTURE CENTER ™ Print Quality 5 Press to select PRINT QUALITY . Press Menu/Set . 6 Press to select NORMAL , FINE or PHOTO . Press Menu/Set . 7 Press Colour Copy to print. — OR — Press for more settings. Brightness 5 Press to select BRIGHTNESS . Press Menu/Set . 6 Press to make a lig hter print. — OR — Press to make a ...
Brother DCP-4020C - page 68

WALK-UP PHOTOCAPTURE CENTER ™ 6 - 14 Colour Enhancement You can turn on the colour enhan cement feature to print more vivid images. If you want to customize the White Balance, Sharpness or Colour Density, press Menu/Set , 3 , 5 . (See Colour Enhancement on page 6-18.) 5 Press to select COLOUR ENHANCE . Press Menu/Set . 6 Press to select ON (or OF ...
Brother DCP-4020C - page 69

6 - 15 WALK-UP PHOTOCAPTURE CENTER ™ 1 Insert your media card into the appropriate drive (slot). 2 Press Print Image . 3 If there is a DPOF file on the card, the LCD shows: 4 Press 1 to select 1.YES . 5 Press Colour Copy to print. The media active message will be shown for 60 seconds and then the display will return to standby mo de. If you want ...
Brother DCP-4020C - page 70

WALK-UP PHOTOCAPTURE CENTER ™ 6 - 16 Changing the default settings You can adjust the Print Quality, Print Size, Brightness, Contrast, Colour Enhance and Scan to Card settings, that a re shown in the chart. These settings will rema in set until you change them again. Press Menu/Set , 3 , followed by the number of the setting you want to change. ( ...
Brother DCP-4020C - page 71

6 - 17 WALK-UP PHOTOCAPTURE CENTER ™ Print Quality 1 Press Menu/Set , 3 , 1 . 2 Press to select NORMAL , FINE or PHOTO . Press Menu/Set . 3 Press Stop/Exit . Print Size 1 Press Menu/Set , 3 , 2 . 2 Press to select 13 × 9CM , 15 × 10CM , 18 × 13CM or 20 × 25CM . Press Menu/Set . 3 Press Stop/Exit . Brightness 1 Press Menu/Set , 3 , 3 . 2 Press ...
Brother DCP-4020C - page 72

WALK-UP PHOTOCAPTURE CENTER ™ 6 - 18 Contrast You can choose the co ntrast setting. More Contrast will make an image look sharper and more vivid. 1 Press Menu/Set , 3 , 4 . 2 Press to increase th e contrast. — OR — Press to decrease the cont rast. Press Menu/Set . 3 Press Stop/Exit . Colour Enhancement 1 Press Menu/Set , 3 , 5 . 2 Press to se ...
Brother DCP-4020C - page 73

6 - 19 WALK-UP PHOTOCAPTURE CENTER ™ 4 Press to adjust the degree of White Balance. Press Menu/Set . 5 Repeat Step 4 and Step 5 to adjust the degree of Sharpness and Colour Density. — OR — Press Stop/Exit . ■ White Balance This setting adjusts the hue of th e white areas of an image. Lighting, Camera settings and o ther influences will effe ...
Brother DCP-4020C - page 74

WALK-UP PHOTOCAPTURE CENTER ™ 6 - 20 Understanding the Error Messages Once you are familiar with the types of errors that ca n occur while you’re using the PhotoCapture Center ™ , you can easily identify and troubleshoot any difficulties. When an error message appears on the LCD, the DCP will beep to get your attention. MEDIA ERROR — This m ...
Brother DCP-4020C - page 75

6 - 21 WALK-UP PHOTOCAPTURE CENTER ™ Using PhotoCapture Center ™ from your PC You can access the media card that is in the media drive (slot) of the DCP from your PC. See Using PhotoCapture Center ™ from your PC. (See Using the PhotoCapture Center ™ from your PC on page 12-1 and Using the PhotoCapture Center ™ from a Macintosh ® on page ...
Brother DCP-4020C - page 76

USING THE DCP AS A PRINTER 7 - 1 7 Using the Brother DCP-4020C printer driver A Printer Driver is software that translates data from the f ormat used by a computer into the format required by a particular p rinter, using a printer command language or page description language. The printer drivers are on the CD-ROM we have supplied. Install the driv ...
Brother DCP-4020C - page 77

7 - 2 USING THE DCP AS A PRINTER Choosing the right type of paper To get high quality printing using your DCP, it’s very important to select the right type of paper. Be sure to read Chapter 2 Paper in this Guide before you select and pu rchase paper for the DCP. How to print your document When the DCP receives data from your computer, it begins p ...
Brother DCP-4020C - page 78

USING THE DCP AS A PRINTER 7 - 3 Simultaneous printing Your DCP can print from your computer while scanning a document into the computer. However, when th e DCP is copying, it pauses the PC printing operation, and resumes when cop ying is complete. Clearing data from the memory If the LCD shows DATA REMAINS , yo u can clear the data that is left in ...
Brother DCP-4020C - page 79

8 - 1 PRINTER DRIVER SETTINGS 8 Printer driver settings You can change the following p rin ter settings when you print from your computer: ■ Media Type/Quality (Speed) ■ Page Layout ■ Near Edge Print ■ Colour Matching/Halftone Pattern ■ Colour Enhancement ■ Scaling ■ Watermark ■ Print Date & Time ■ Quick Print Setup How to acc ...
Brother DCP-4020C - page 80

PRINTER DRIVER SETTINGS 8 - 2 Basic tab 1 Select the Media Type and Quality . 2 Select the Paper Size , Page Layout , Border Line (if any), Orientation , number of Copies , the page order and Near Ed ge Print . 3 Click the Apply button to apply your selecte d settings. To return to the def ault settings, click the Default button, t hen click the Ap ...
Brother DCP-4020C - page 81

8 - 3 PRINTER DRIVER SETTINGS Media Type To achieve the best print results, the me dia being printed o n should be selected in the driver. The DCP cha nges the way it prints, depending on the selected media type. Plain Paper Inkjet Paper Glossy Paper (4 colour) Glossy Paper (3 colour) Transpare ncies The print quality of black ink depends on the ty ...
Brother DCP-4020C - page 82

PRINTER DRIVER SETTINGS 8 - 4 Quality The quality selection allows you to ch oose the print resolution you want for your document. Print quality and speed are related. The higher the quality the long er it will take to print the document. Th e quality selections that are available will vary depending on the med ia type you select. ■ Photo: 2400 x ...
Brother DCP-4020C - page 83

8 - 5 PRINTER DRIVER SETTINGS Bi-Directional Printing When Bi-Directional Printing is selected, the prin t heads print in both directions and offer faster print speeds. Wh en not selected, the print heads will only print in one direction to provide higher quality printouts. ...
Brother DCP-4020C - page 84

PRINTER DRIVER SETTINGS 8 - 6 Paper Size The Paper Size selection provides a larg e selection of standard paper sizes. If you wish, you can create a custo m size ranging from 89 x 127 mm to 216 x 355.6 mm. From the drop-d own box, select the Paper Size you are using. You can enter custom size by selecting User Defined . Select the proper paper thic ...
Brother DCP-4020C - page 85

8 - 7 PRINTER DRIVER SETTINGS Page Layout The Page Layout selection can reduce the image size of a page allowing multiple pages to be p rinted on one sheet of p aper or enlarging the image size for printing one page on multiple sheets of paper. If you are using Windows ® 98/98SE/Me , the 4 in 1 layout is not available. Border Line When printing mu ...
Brother DCP-4020C - page 86

PRINTER DRIVER SETTINGS 8 - 8 Copies The Copies selection sets the number of copies that will be printed (1 to 999). Collate With the Collate check box selected, one complete copy of your document will be printed and then rep eated for the number of copies you selected. If the Collate check box is not selected, then ea ch page will be printed for a ...
Brother DCP-4020C - page 87

8 - 9 PRINTER DRIVER SETTINGS Advanced tab Change the tab settings by selecting one of the following icons: 1.Colour 2.Scaling 3.Watermark 4.Device Options To return to the def ault settings, click the Default button. 1 2 3 4 ...
Brother DCP-4020C - page 88

PRINTER DRIVER SETTINGS 8 - 10 Colour Colour/Greyscale This selection allows a colour do cument to be printed in black and white using grey scale. Image Type The printer driver will select the most suitable colour matching and half tone method, depending on your image type. Generally, text and business graphics are printed vivid ly and photographic ...
Brother DCP-4020C - page 89

8 - 11 PRINTER DRIVER SETTINGS Custom Image Type You can select the colour matching method manually. Select the best one for your document. Match Monitor Colour is adjusted to get the close st colour match to the PC monitor. ■ Natural: Suitable for photographic ima ges. The colour is adjusted to print a more natural colour. ■ Vivid: Suitable fo ...
Brother DCP-4020C - page 90

PRINTER DRIVER SETTINGS 8 - 12 Halftone Pattern The DCP can use two methods ( Diffusion or Dither ) to arrange where to place dots to express halftones. There are some predefined patterns set for this and you can select which one to use for your document. Select the appropriate method. ■ Diffusion: Dots are placed at random to create the halftone ...
Brother DCP-4020C - page 91

8 - 13 PRINTER DRIVER SETTINGS Colour Enhancement Selecting Colour Enhancement enables the Colour Enhancemen t feature. This feature analyzes your image to improve qua lity sharpness, white balance and colour density. This process may take several minutes depending on the size of the image and the specifications of your computer. ■ Colour Density ...
Brother DCP-4020C - page 92

PRINTER DRIVER SETTINGS 8 - 14 ■ White Balance This setting adjusts the hue of the white areas of an image. Lighting, camera settings and other influences will effect the appearance of white. The white areas of a picture may be slightly pink, yellow or some other colour. By using this adjustment you can correct this effect and bring the white are ...
Brother DCP-4020C - page 93

8 - 15 PRINTER DRIVER SETTINGS Scaling You can change the print size of your document with the Scaling feature. ■ Check Off if you want to print the document as it appears on your screen. ■ Check Fit to Paper Size , if your docume nt has an unusual size , or if you have only the stand ard size paper. ■ Check Free if you want to reduce the siz ...
Brother DCP-4020C - page 94

PRINTER DRIVER SETTINGS 8 - 16 Watermark You can place a logo or text into your d ocument as a Watermark. You can select one of the preset Wa termarks, or you can use a bitmap file or text file that you have created. Check Use Watermark , and then select the watermark yo u want to use. In background Check In backgrou nd with the Watermark to print ...
Brother DCP-4020C - page 95

8 - 17 PRINTER DRIVER SETTINGS Watermark Style You can change the Watermark’s size and position on the page by selecting the Watermark, and clicking the Edit button. If you want to add a new Watermark, click the New button, and then select Text or Bitmap in the Watermark Style . ■ Watermark Text Enter your Watermark text into the Text Box, and ...
Brother DCP-4020C - page 96

PRINTER DRIVER SETTINGS 8 - 18 Device Options Lets you set the following Printer Functions: ...
Brother DCP-4020C - page 97

8 - 19 PRINTER DRIVER SETTINGS Print Date & Time When enabled the Print Date and Time feature will print the date and time on your document from your computer’s system clock. Click the Setting button to change the Date and Time format, and the Position and Font . To include a background with the Date and Time , select Opaque . When Opaque is ...
Brother DCP-4020C - page 98

PRINTER DRIVER SETTINGS 8 - 20 Quick Print Setup The Quick Print Setup feature allo ws you to quickly select driver settings. To view the settings, simp ly click your mouse button on the task tray icon. This feature can be set to ON or OFF from the Device Options . ...
Brother DCP-4020C - page 99

8 - 21 PRINTER DRIVER SETTINGS Support tab The Support Tab provides driver version and setting information. In addition there are links to the Brother Solutio ns Center and the Driver Update Web sites. Click the Support tab to display the fo llowing screen: Brother Solutions Center The Brother Solutions Center is a Web site offering information abo ...
Brother DCP-4020C - page 100

HOW TO SCAN USING WINDOWS ® 9 - 1 9 How to scan using Windows ® The scanning operations and driver s will be different depending on your operating system. For Windows ® 98/98SE/Me and 2000 Professional The DCP uses a TWAIN Compliant driver for scanning documents from your applications. (See Scanning a document (For Windows ® 98/98SE/Me and 2000 ...
Brother DCP-4020C - page 101

9 - 2 HOW TO SCAN USING WINDOWS ® Scanning a document (For Windows ® 98/98SE/Me and 2000 Professional) TWAIN compliant The Brother MFL-Pro Suite includes a TWAIN compliant scanner driver. TWAIN drivers meet the standard universal protocol for communicating between scanners an d software applications. This means that not only can you sc an images ...
Brother DCP-4020C - page 102

HOW TO SCAN USING WINDOWS ® 9 - 3 How to access the Scanner 1 Open the software application (ScanSoft ® PaperPort ® ) to scan a document. 2 Select Scan from the File drop-down menu or select the Scan button. The Scan pane appears in the left panel. 3 Select TWAIN_32 Brother MFL Pro Scanner from the Scanner drop-down list box. 4 Click the Scan bu ...
Brother DCP-4020C - page 103

9 - 4 HOW TO SCAN USING WINDOWS ® Scanning a document into the PC You can scan a whole page — OR — scan a portion of the page after pre-scann ing the document. Scanning a whole page 1 Place the original face down on the scanner glass. 2 Adjust the following settings, if req uired, in the Scanner window: ■ Scan ( Image Type ) ■ Resolution ? ...
Brother DCP-4020C - page 104

HOW TO SCAN USING WINDOWS ® 9 - 5 PreScanning to crop a portion you want to scan The Pre-Scan button is used to preview an image for cropping any unwanted areas from the image. When you are satisfied with the preview, click the Start button in the scanner win dow to scan the image. 1 Place the original face down on the scanner glass. 2 Select the ...
Brother DCP-4020C - page 105

9 - 6 HOW TO SCAN USING WINDOWS ® 4 Select the portion you want to scan by clicking the left mouse button and dragging it. 5 Click Start . This time only the se lected area of the original will appear in the PaperPort ® window (or your software application window). 6 In the PaperPort ® window, use the options av ailable to refine the image. If y ...
Brother DCP-4020C - page 106

HOW TO SCAN USING WINDOWS ® 9 - 7 Settings in th e Scanner window Scan (Image Type) Select the image type of output from Photo , We b or Text . Resolution and Scan Type will be altered for ea ch default setting. The default settings are: Resolution You can change the scannin g resolution from the Resolution drop down list. Higher resolutions take ...
Brother DCP-4020C - page 107

9 - 8 HOW TO SCAN USING WINDOWS ® Scan Type Brightness Adjust this settings (-50 to 50) t o obt ain the best ima ge. Th e de fault value is 0, representing an ‘average ’. You can set the level by dra gging the slide bar to the right or left to lighten or darken the image. You can also type a value in the box for the setting. If the scanned ima ...
Brother DCP-4020C - page 108

HOW TO SCAN USING WINDOWS ® 9 - 9 Document Size Set the Size to one of the following: ■ Letter (8 1/2 x 11 in.) ■ A4 (210 x 297 mm) ■ A5 (148 x 210 mm) ■ B5 (182 x 257 mm) ■ Executive (7 1/4 x 10 1/2 in.) ■ Business Card (90 x 60 mm ) ■ Photo (9 x 13 cm) ■ Photo (13 x 18 cm) ■ APS C (10 x 15 cm ) ■ Custom (User adjustable from ...
Brother DCP-4020C - page 109

9 - 10 HOW TO SCAN USING WINDOWS ® If you selected Custom as the size, The Custom Document Size dialog box will appear. Type the Name, Width and Height for the d ocument. You can choose ‘mm ’ or ‘inch ’ as th e unit for Width and Height . ■ Width: shows the width of scanning area ■ Height: shows the height of scanning area ■ Data Siz ...
Brother DCP-4020C - page 110

HOW TO SCAN USING WINDOWS ® 9 - 11 Scanning a document (For Windows ® XP only) WIA compliant Windows ® XP uses W indows Image Acquisition (WIA) for scanning images from the DCP. You can scan images directly into the PaperPort ® vie wer that Brother included with your DCP or you can scan images directly into any other software application th at ...
Brother DCP-4020C - page 111

9 - 12 HOW TO SCAN USING WINDOWS ® Scanning a document 1 Place the original face down on the scanner glass. 2 Select the picture type (A). 3 If you require advanced settings, click Adjust the quality of the scanned picture (B). You can select Brightness , Contrast , Resolution and Picture Type from the Advanc ed Properties . Click the OK button af ...
Brother DCP-4020C - page 112

HOW TO SCAN USING WINDOWS ® 9 - 13 PreScanning to crop a portion you want to scan The Preview button is used to pre view an image for cropping any unwanted portions from the ima ge. When you are satisfied with the preview, click the Scan button from the scanner window to scan the image. 1 Place the original face down on the scanner glass. 2 Select ...
Brother DCP-4020C - page 113

9 - 14 HOW TO SCAN USING WINDOWS ® 5 If you require advanced settings, click Adjust the quality of the scanned picture (B). You can select Brightness, Contrast, Resolution and Picture Type from the Advanced Prope rti es tab. Click the OK button after you choose your set tings. 6 To start scanning your docume nt, click the Scan button in the Scan d ...
Brother DCP-4020C - page 114

HOW TO SCAN USING WINDOWS ® 9 - 15 Brother Scanner Utility The Brother Scanner Utility is used for configuring the scanner driver for resolutions higher than 1 200dpi. To run the utility: You can run the utility by selecting the Scanner Utility located in the Start / Programs / Brother / Brother MFL-Pro Suite menu. If you scan the original at a re ...
Brother DCP-4020C - page 115

9 - 16 HOW TO SCAN USING WINDOWS ® Using the scan key You can use the Scan to key on the control panel to scan originals into your word processing, graphics or E-mail applicatio ns or your computer folder. The advanta ge of using the Scan to key i s that you avoid the mouse clicks required to scan from your computer. If you are using a Macintosh ? ...
Brother DCP-4020C - page 116

HOW TO SCAN USING WINDOWS ® 9 - 17 Scan to E-mail You can either scan a black and white or colour original into your E-mail application as a file attachment. You can change the Scan to key configuration.(See Scan to E-mail on page 10-7 to 10-9.) (Fo r Windows ® XP: See Hard ware Section: Changing the Scan to Button Configuration on page 11-6 to 1 ...
Brother DCP-4020C - page 117

9 - 18 HOW TO SCAN USING WINDOWS ® Scan/OCR If your original is text, you can have it con verted by ScanSoft ® TextBridge ® to an editable te xt file and then have th e result displayed in your word processing applicati on f or viewing and editing. You can change the Scan to key configuration. (See Scan to OCR (Word Processor) on page 10-10 to 1 ...
Brother DCP-4020C - page 118

HOW TO SCAN USING WINDOWS ® 9 - 19 Scan to Card You can scan black and white and col our originals into a media card. Black and white originals will be stored in TIFF file format ( *.TIF). Colour originals may be stored in PDF (*.PDF) or JPEG (*.JPG) file format. The default setting is COLOUR STD and the default file format is PDF. File names defa ...
Brother DCP-4020C - page 119

9 - 20 HOW TO SCAN USING WINDOWS ® 6 Press to select the quality you want . Press Menu/Set . If you selected COLOUR STD , COLOUR FINE or COLOUR S.FINE , press to select the file format ( PDF or JPEG ). Press Menu/Set . — OR — To start scanning, press to select START SCANNING . Press Menu/Set . — OR — To change the file name, go to Step 7 . ...
Brother DCP-4020C - page 120

HOW TO SCAN USING WINDOWS ® 9 - 21 Entering text Most number keys have three or four letters printed below them. The keys for 0 , # and do not have printed letters be cause they are used for special characters. By pressing the appropriate number key repeatedly, you can access the character you want. Inserting spaces To enter a space, press twice b ...
Brother DCP-4020C - page 121

9 - 22 HOW TO SCAN USING WINDOWS ® Making corrections If you entered a letter incorrectly and want to change it, press to move the cursor after the last correct letter . Then press Stop/Exit . All the letters above and to the righ t of the cursor will be deleted. Re-enter the correct characters. You can also back up and type over incorrect letters ...
Brother DCP-4020C - page 122

HOW TO SCAN USING WINDOWS ® 9 - 23 Using ScanSoft ® PaperPort ® and TextBridge ® OCR ScanSoft ® PaperPort ® for Brother is a document management application. You will use PaperPort ® to view scanne d documents. PaperPort ® has a sophisticated, yet easy-to-use , filing system that will help you organize your graphics and text documents. It a ...
Brother DCP-4020C - page 123

9 - 24 HOW TO SCAN USING WINDOWS ® Viewing items ScanSoft ® PaperPort ® provides several ways to view item s: Desktop View displays a thumbnail (a small graphic that represen ts each item in a Desktop or folder). Items in the selected folde r appear on the PaperPort ® Desktop. You can see PaperPort ® items (MAX files) and non-PaperPort ® item ...
Brother DCP-4020C - page 124

HOW TO SCAN USING WINDOWS ® 9 - 25 Organizing your items in folders PaperPort ® has an easy-to-use filing system for organizing your items. The filing system consists of folders and items that you select to view in Desktop View. An item can be a PaperPort ® item or a non-PaperPort ® item: ■ Folders are arranged in a “tree” structure in th ...
Brother DCP-4020C - page 125

9 - 26 HOW TO SCAN USING WINDOWS ® ScanSoft ® TextBridge ® OCR lets you convert image text in to text you can edit ScanSoft ® TextBridge ® OCR is installed automatically with PaperPort ® wh en you install MFL-Pro Suite on your comput er. ScanSoft ® PaperPort ® can quickly convert the text on a ScanSoft ® PaperPort ® item (which is really ...
Brother DCP-4020C - page 126

HOW TO SCAN USING WINDOWS ® 9 - 27 You can Export items in other formats You can export or save PaperPort ® items in several popular file formats, such as BMP, JPEG, TIFF, or self-viewing. For example, to create a file for an Intern et Web site, export it as a JPEG file. Web pages often use JPEG files for displaying images. Exporting an image fil ...
Brother DCP-4020C - page 127

10 - 1 USING THE BROTHER CONTROL CENTER FOR WIND OWS ® 98 / 98 SE /M E/2 0 00 PRO FES SIO NAL 10 Brother MFL-Pro Contro l Center Th e B rot h er C on tr ol Ce nt er is a so ft wa re ut il i ty t ha t p ops up on the PC screen whe ne ver you click the Control Center icon in the Task Tr ay an d s ele ct Show . This lets yo u configure the Scan t o k ...
Brother DCP-4020C - page 128

USING THE BROTHER CONTR OL CENTER FOR WIN DOWS ® 98/ 98SE/ME/2000 PROFESSIONAL 10 - 2 AutoLoad the Brother Control Center The Control Center is loaded every time Windows ® is started. When the Control Center is lo aded, the Control Center icon will appear on the task bar. If you don’t want the Control Center to load automatically, you can turn ...
Brother DCP-4020C - page 129

10 - 3 USING THE BRO THER CONTROL CEN TER FOR WINDOWS ® 98/ 98SE/ME/2000 PRO FESSIONAL Brother Control Center features Auto Configuration During installation the Control Center will check your system to set up the default applications for E-mail, word processing and the graphics viewer/editor. For example, if you are using Outlook as your def ault ...
Brother DCP-4020C - page 130

USING THE BROTHER CONTR OL CENTER FOR WIN DOWS ® 98/ 98SE/ME/2000 PROFESSIONAL 10 - 4 Scan to key operations Scan to File —Lets you to scan directly to a file on your comp uter. You can change the file type and directory for the document you are scanning. Scan to E-mail —Lets you scan a picture or text docume nt directly into an E-mail applica ...
Brother DCP-4020C - page 131

10 - 5 USING THE BRO THER CONTROL CEN TER FOR WINDOWS ® 98/ 98SE/ME/2000 PRO FESSIONAL Scan to File To access Scan to File Configuration screen 1 In the Task Tray click the Contro l Center icon and select Show to access the Brother Control Center window. 2 Right-click Scan to File button and then click on Configuration . Click the Modify Settings ...
Brother DCP-4020C - page 132

USING THE BROTHER CONTR OL CENTER FOR WIN DOWS ® 98/ 98SE/ME/2000 PROFESSIONAL 10 - 6 Destination folder PaperPort ® Folder —Select this check box to scan the original into your PaperPort ® folder. Other Folder —Select this check box, to scan the original as another file type or to store it in another d irectory/folder. File —If you select ...
Brother DCP-4020C - page 133

10 - 7 USING THE BRO THER CONTROL CEN TER FOR WINDOWS ® 98/ 98SE/ME/2000 PRO FESSIONAL Scan to E-mail To access Scan to E-ma il Configuration screen 1 In the Task Tray click the Contro l Center icon and select Show to access the Brother Control Center window. 2 Right-click the E-mail application butto n and click on Configuration . Click the Modif ...
Brother DCP-4020C - page 134

USING THE BROTHER CONTR OL CENTER FOR WIN DOWS ® 98/ 98SE/ME/2000 PROFESSIONAL 10 - 8 Scanner settings From the pull-down list, select the scanning mode that is ap propriate for the type of file: Text for OCR ; Photos ; Photos (High Quality) ; Photos (Quick Scan) or Custom . To change any of the setting s for this mode, click Modify Settings . E-m ...
Brother DCP-4020C - page 135

10 - 9 USING THE BRO THER CONTROL CEN TER FOR WINDOWS ® 98/ 98SE/ME/2000 PRO FESSIONAL Send to Options Convert attachments to specified file type —Converts items to the type in the File Type box. Clear this check box to keep files in their source format; for example, to keep Word documents in the .doc format and JPEG images in the .jpg format. A ...
Brother DCP-4020C - page 136

USING THE BROT HER CONTROL CENTER FOR WINDOWS ® 98/ 98SE/ME/2000 PRO FESSIONAL 10 - 10 Scan to OCR (Word Processor) To access Scan to OCR Configuration screen 1 In the Task Tray click the Control Cente r icon and select Show to access the Brother Control Center window. 2 Right-click the word processor application button and click on Configuration ...
Brother DCP-4020C - page 137

10 - 11 USING THE BROTHER CONTROL CENTER FOR WINDO WS ® 98/ 98SE/ME/2000 PROFESSIONAL Scanner settings From the pull-down list, select the scanning mode that is ap propriate for the type of file: Text for OCR ; Photos ; Photos (High Quality) ; Photos (Quick Scan) or Custom . To change any of the se ttings for this mode, click Modify Settings . Wor ...
Brother DCP-4020C - page 138

USING THE BROT HER CONTROL CENTER FOR WINDOWS ® 98/ 98SE/ME/2000 PRO FESSIONAL 10 - 12 OCR —Identify the OCR program to use to convert scanned document images to editable documents. This option is available only when you have an OCR progra m other than the one provided with PaperPort ® . (PaperPort ® 8.0 uses the same OCR engine that is in Sca ...
Brother DCP-4020C - page 139

10 - 13 USING THE BROTHER CONTROL CENTER FOR WINDO WS ® 98/ 98SE/ME/2000 PROFESSIONAL Scan to Image To access Scan to Imag e Configuration screen 1 In the Task Tray click the Contro l Center icon and select Show to access the Brother Control Center window. 2 Right-click the graphic appl ication button an d click on Configuration . Click the Modify ...
Brother DCP-4020C - page 140

USING THE BROT HER CONTROL CENTER FOR WINDOWS ® 98/ 98SE/ME/2000 PRO FESSIONAL 10 - 14 Target Application Application —From the pull-down list, select the app lication you want to add to this Pop-Up screen. Click the Custom Link Settings button to set up links for your user-defined application. ...
Brother DCP-4020C - page 141

11 - 1 USING THE WINDOWS ® BASED BROTHER SMART UI CONTROL CENTE R 11 Brother SmartUI Control Center The Brother Control Center is a software u tility that allows you to quite easily, with very fe w mou se clicks, access the mo st f requently used scanning applications . Using the Control Ce nter eliminates the need to manually launch the specific ...
Brother DCP-4020C - page 142

USING THE WINDOWS ® BASED BROTHER SMARTU I CONTROL CENTER 11 - 2 In the Task Tray right-click on the Control Center icon and select Show to have access to the Brother SmartUI Control Center window. AutoLoad the Brother Control Center The Control Center is initially c onfigured to automatically load each time Windows ® is started. When the Control ...
Brother DCP-4020C - page 143

11 - 3 USING THE WINDOWS ® BASED BROTHER SMART UI CONTROL CENTE R How to turn off Auto Load 1 Click the Control Center icon in the Task Tray and select Show . 2 The main SmartUI Control Center window appears. Please look at the bottom of the window for a check box labeled “AutoLoad Pop-up”. 3 Uncheck the AutoLoad Pop-Up option to prevent th e ...
Brother DCP-4020C - page 144

USING THE WINDOWS ® BASED BROTHER SMARTU I CONTROL CENTER 11 - 4 Brother Control Center features The SmartUI control center g ives you the ability to co nfigure the hardware Scan to key on your DCP such as “Scan to File ”. The “Scan to File” feature allows you to scan a document directly to your hard disk and choose the file forma t and de ...
Brother DCP-4020C - page 145

11 - 5 USING THE WINDOWS ® BASED BROTHER SMART UI CONTROL CENTE R Auto Configuration During the installation process the Control Center che cks your system to determine the default applica tions for E-mail, word processing and graphi cs viewer/editor. For example , if you are using Outlook as your default E-mail application, the Control Center aut ...
Brother DCP-4020C - page 146

USING THE WINDOWS ® BASED BROTHER SMARTU I CONTROL CENTER 11 - 6 Hardware Section: Changing the Scan to Button Configuration When the SmartUI Control Center is displayed, you can access the Hardware Section window to reconfigure the Scan to key on your DCP. Click the Hardware Section tab at the t op left of the SmartUI Control Center screen. (See ...
Brother DCP-4020C - page 147

11 - 7 USING THE WINDOWS ® BASED BROTHER SMART UI CONTROL CENTE R Scan To E-mail To configure the Scan to E-mail feature left -click on the Scan to E-mail button and the following screen will a ppear. You have the ability to change the con figuration that includes the destinatio n E-mail application, attachment file and the scann er settings. To c ...
Brother DCP-4020C - page 148

USING THE WINDOWS ® BASED BROTHER SMARTU I CONTROL CENTER 11 - 8 Scan To File To configure the Scan to File feature, left click on the Scan to File button and the following screen will appe ar. Select the file type for the saved image by selecting from the Format pull down list. You can save the file to the default Pape rPort ® folder so the file ...
Brother DCP-4020C - page 149

11 - 9 USING THE WINDOWS ® BASED BROTHER SMART UI CONTROL CENTE R Scan To Image To configure the Scan to Image feature left-click on the Scan to Image button and the following scree n will appear. You have the ability to change the con figuration, which includes the destination image format or document application. ...
Brother DCP-4020C - page 150

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 10 To change the default se tting of the scan, click on the Scan Settings tab. You can set the Colour Mod e to Black & White, 8-bit Grey or 24-bit Colour. The resolution can be changed from 100 to 1200 dpi. You can define the size of the paper you’re using, and you can adjust t ...
Brother DCP-4020C - page 151

11 - 11 USING THE WINDO WS ® BASED BROTHER SMAR TUI CONTROL CENTER Scan To OCR To configure the Scan to OCR feature left-click on the Scan to OCR button and the following screen will appe ar. You have the ability to change the configuration, wh ich includes the destination applications. ...
Brother DCP-4020C - page 152

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 12 If you wish to send yo ur scan as a different file type, click on Link preferences button. You can select the File T ype according to your needs. You have the option to ch oose your OCR setting from Single column output to Auto orient page . ...
Brother DCP-4020C - page 153

11 - 13 USING THE WINDO WS ® BASED BROTHER SMAR TUI CONTROL CENTER Software Section The Software Section contains three groups of scan to buttons. Each section has a number of different button s which are predefined for the most frequently used applications. The Scan section con tains four buttons for Scan to File, Scan to E-mail, Scan to Word Pr ...
Brother DCP-4020C - page 154

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 14 Scan *1 Scan to File —enables you to scan directly to a disk file. You can change the file type and destin ation directory, as needed. *2 Scan t o E-mail (Default: Outlook Express) —enables you to scan a page or document directly in to an E-mail application as a standard attac ...
Brother DCP-4020C - page 155

11 - 15 USING THE WINDO WS ® BASED BROTHER SMAR TUI CONTROL CENTER Copy Copy (Copy one to one)—allows you to use the PC and any Windows ® printer d river for enhanced c opy operations. You can scan the page on the DCP and print the copies u sing any of the features of the DCP printer driver— OR —you can direct the copy outp ut to any standa ...
Brother DCP-4020C - page 156

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 16 Scan to File The Scan to File button allo ws you to scan an image and save it in a specific file type to any directo ry on you hard disk. This allows you to easily archive your p aper documen ts. To configure the file type and save to directory rig ht-click on t he Sca n to File b ...
Brother DCP-4020C - page 157

11 - 17 USING THE WINDO WS ® BASED BROTHER SMAR TUI CONTROL CENTER To change the configura tion click on the Configu ration tab. Select the file type for the saved image by selecting from the Format pull down list. You can save the file to the default PaperPort ® folder so the file appears in PaperPort ® or you can select another folder/director ...
Brother DCP-4020C - page 158

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 18 Scan to E-mail The Scan To E-mail is automatically configured to your default E-mail application. To change the defau lt E-mail application or attachment file type right-click on the E-mail button and sele ct “Configuration”. The Scan Action tab is set to E-mail and should not ...
Brother DCP-4020C - page 159

11 - 19 USING THE WINDO WS ® BASED BROTHER SMAR TUI CONTROL CENTER To change the file type of the attachment click the Link Preferenc es button to set up links. Check the Convert attachments to specified file type box and then select the appropriate file type from the pull down list. ...
Brother DCP-4020C - page 160

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 20 File attachments Items are mailed as file attachments using the file type you have selected. Convert attachments to specified file type —Click this chec k box if you want to change the file type of attachmen ts. All documents and image items —Click this check box if you want t ...
Brother DCP-4020C - page 161

11 - 21 USING THE WINDO WS ® BASED BROTHER SMAR TUI CONTROL CENTER Scanner settings You have the ability to cha nge the scanner settings used to create the file attachments. Click on the Scan Settings tab and select the appropriate settings. ...
Brother DCP-4020C - page 162

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 22 Scan to OCR (Word Processing program) Scan to OCR converts the graphic page image data to text which can be edited by any word proces sor program. You can change t he default word processor program (example: Word instead of Word Pad) and file type. You ca n also choose other OCR s ...
Brother DCP-4020C - page 163

11 - 23 USING THE WINDO WS ® BASED BROTHER SMAR TUI CONTROL CENTER To change the program link preferen ces click the Link Preferences button. File Type —From the pull-down list, select th e file format you want to use for documents. OCR —Select the OCR application from the OCR pull down list. ...
Brother DCP-4020C - page 164

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 24 Scan to Graphics application (example: Microsoft Paint) The Scan to Graphics Application allows you to scan an image so you can edit the image. To chan ge the default graphics application right-click on the button and select Configuration. The Scan Action tab is set to Applicatio ...
Brother DCP-4020C - page 165

11 - 25 USING THE WINDO WS ® BASED BROTHER SMAR TUI CONTROL CENTER To change the destination application select the a ppropriate application from the Application pull do wn list. To change the other configuration opt ions click the Link Preferences button. These option enable you to reduce the imag e to a screen resolution of (96dpi), show warning ...
Brother DCP-4020C - page 166

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 26 Copy The copy button can be customize d to allow you to take advantage of the features built into the Bro ther printer drivers to do advanced copy functions. The Copy button is automatically linked to the defa ult Windows printer driver. You can set any printer as the default prin ...
Brother DCP-4020C - page 167

11 - 27 USING THE WINDO WS ® BASED BROTHER SMAR TUI CONTROL CENTER ...
Brother DCP-4020C - page 168

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 28 Custom: User-defined buttons There are up to three Custom buttons on t he Brother SmartUI Control Center. You can set your own preferences and configuration to fit your required application. To configure a Cu stom Button right click on the button and t hen click Configuration. The ...
Brother DCP-4020C - page 169

11 - 29 USING THE WINDO WS ® BASED BROTHER SMAR TUI CONTROL CENTER Customizing a user-defined button To configure a Custom button right-click on the button and then click Configuration. Please follow the f ollowing guide lines for Custom Button configuratio n. 1. Select the Scan Action Select the type of scan by clicking the app ropriate button. ...
Brother DCP-4020C - page 170

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 30 2. Select Configurat ion for the Scan Type. To configure the scan operation click o n the Configuration Tab. Depending upon which Scan Type button you selected you will see a different Configurati on Tab list of settings. Application: Select the destination applica tion program fr ...
Brother DCP-4020C - page 171

11 - 31 USING THE WINDO WS ® BASED BROTHER SMAR TUI CONTROL CENTER File: Select the file format from the Format pull down lis t. You can either send the file to the default PaperPort ® directory or select your own destination directory by selecting Other Folder. Use the Browse button to select the destination directory. ...
Brother DCP-4020C - page 172

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 32 OCR: Select the destination word proc essing application pro gram from the pull down list. Click on Link Preferences and select the destination Application fro m the scroll menu on the left. Select the File Type from the File Type pull down list. You can also ch oose another OCR a ...
Brother DCP-4020C - page 173

11 - 33 USING THE WINDO WS ® BASED BROTHER SMAR TUI CONTROL CENTER E-mail: Select the destination E-mail appl ication program from the pull down list. Click on the Link Preferences button to conf igure the Send To E-mail options. You can select the File type and Quick Send E-mail address list. ...
Brother DCP-4020C - page 174

USING THE WINDO WS ® BASED BROTHER S MARTUI CONTROL CE NTER 11 - 34 3. Select Scan Settings. You can select the scanner sett ings from each of the Scan Type options for the Custom buttons. You have the option to select Colour Mode, Resolution, Paper Size and Brightn ess and Contrast settings. ...
Brother DCP-4020C - page 175

12 - 1 USING THE PHOTOCAPTURE CENTER ™ FROM YOUR PC 12 Introduction 1 Insert a SmartMedia ® , CompactFlash ® or Memory Stick ® card into your DCP. 2 In Windows ® Explorer on your PC, double-click the Removable Disk icon. The files an d folders that are on the media card will appear on your PC scre en. Using the PhotoCapture Center ™ from yo ...
Brother DCP-4020C - page 176

USING THE PHOTOCAPTURE CENTER ™ FROM Y OUR PC 12 - 2 3 You can edit the file and save it to ano ther drive on your PC or on the media card. When you take out a media card, do the f ollowing to keep from damagin g it: 1 In the My Computer win dow, right -click the removable disk icon and select “ Eject ” from the Context me nu. 2 Wait until th ...
Brother DCP-4020C - page 177

12 - 3 USING THE PHOTOCAPTURE CENTER ™ FROM YOUR PC Using ArcSoft ® PhotoPrinter ® 4 Arcsoft PhotoPrinter ® 4 software is for editing and printing your images including templates that aid you in printing multiple images on one page and the ability to crop, rotate and add special effects to your picture. Overview of basic steps 1 Insert the mem ...
Brother DCP-4020C - page 178

USING THE PHOTOCAPTURE CENTER ™ FROM Y OUR PC 12 - 4 6 Click on the individual images that you want to create thumbnails for. 7 Click Open to generate thumbnails. 8 Select the thumbnail of the imag e you want to use, and then click Okay . ...
Brother DCP-4020C - page 179

13 - 1 USING YOUR DCP WITH A MACINTOSH ® 13 Setting up your USB equipped Apple ® Macintosh ® G3, G4, iMac ™ or iBook ™ with Mac OS 8.6-9.2 or Mac OS X 10.1/10.2.1 or greater The features supported by the DCP will depend on the operating system you are using. The chart below shows which features are supported. *1 You need to download USB Mass ...
Brother DCP-4020C - page 180

USING YOUR DCP WITH A MACINTOSH ® 13 - 2 Using the Brother printer driver with your Apple ® Macintosh ® (OS 8.6-9.2) To select a Printer: 1 Open the Chooser from the Apple menu. 2 Click the MFL-Pro Color icon. On the right side of the Chooser window, click the printer you want to print t o. Close the Chooser . To print a document: 3 From the app ...
Brother DCP-4020C - page 181

13 - 3 USING YOUR DCP WITH A MACINTOSH ® 4 From application software, click File me nu and select Print . Click Print to start printing. If you want to change Copies , Pages , Quality , Media Type and Color/Mono , select your setti ngs before clicking Print . Click the Option button to change Document and Printing Options . ...
Brother DCP-4020C - page 182

USING YOUR DCP WITH A MACINTOSH ® 13 - 4 Using the Brother Printer Driver with Your Apple ® Macintosh ® (OS X 10.1/10.2.1 or greater) Choosing page setup options From application software such as TextEdit , click the File menu and select Page Setup . Make sure DCP-4020C is selected in the Format for pop-up menu. You ca n change the settings for ...
Brother DCP-4020C - page 183

13 - 5 USING YOUR DCP WITH A MACINTOSH ® Printing a document From application software such as TextEdit, click the F ile menu and select Print . The print dialog box appears, click Print . Make sure DCP-4020C is selected in the Printer pop-up menu. You can select the number of copies or a range of pages to print. ...
Brother DCP-4020C - page 184

USING YOUR DCP WITH A MACINTOSH ® 13 - 6 Choosing printing options To control special printing features of the printer, choose Print Settings in the Print dialog b ox. You can change Quality , Media Type , Color/Mono and Bi-Directional Printing settings. ...
Brother DCP-4020C - page 185

13 - 7 USING YOUR DCP WITH A MACINTOSH ® Using the Brother TWAIN scanner driver with your Macintosh ® (For Mac OS 8.6-9.2 and OS X 10.2.1 or greater) The Brother MFL-Pro Suite includes a TWAIN Sca nner driver for Macintosh ® . Yo u can use this Macin tosh ® TWAIN Scanner driver with any applications that support the TWAIN specifications. Access ...
Brother DCP-4020C - page 186

USING YOUR DCP WITH A MACINTOSH ® 13 - 8 Scanning an image in to your Macintosh ® You can scan a whole page — OR — scan a portion after prescanning the do cument. Scanning a whole page 1 Place the original face down on the scanner glass. 2 Adjust the following settings, if neede d, in the Scanner Setup dialog box: Resolution Color Type Scanni ...
Brother DCP-4020C - page 187

13 - 9 USING YOUR DCP WITH A MACINTOSH ® PreScanning an image PreScanning allows you to scan an im age quickly at a low resolution. A thumbnail version will ap pear in the Scanning Area . This is only a preview of the image, so you c an see ho w it will look. The PreScan button will allow you to crop unwanted areas from the image s. When you are s ...
Brother DCP-4020C - page 188

USING YOUR DCP WITH A MACINTOSH ® 13 - 10 Settings in th e Scanner window Image Resolution From the Resolution pop-up menu choose the scanning resolution. Higher resolutions use more memory and transfer time, but produce a finer scanned image. ...
Brother DCP-4020C - page 189

13 - 11 USING YOUR DCP WITH A MACINTOSH ® Color Type Black & White —Set the image Type to Black and White for text or line art. For photographic images, set th e image typ e to Gray (Error diffusion) or True Gray. Gray (Error Diffusion) —is used for documents with photo graphic images or graphics. (Error Diffusion is a method fo r creating ...
Brother DCP-4020C - page 190

USING YOUR DCP WITH A MACINTOSH ® 13 - 12 Scanning Area Set the Size to one of the following: ■ Letter (8.5 × 11 inches) ■ A4 (210 × 297 mm) ■ A5 (148 × 210 mm) ■ B5 (182 × 257 mm) ■ Executive (7.25 × 10.5 inches) ■ Business Card (90 × 60 mm) ■ Custom (adjusts it from 8.9 x 8.9 mm to 215.9 x297 mm) After you choose a custom siz ...
Brother DCP-4020C - page 191

13 - 13 USING YOUR DCP WITH A MACINTOSH ® Adjusting the Image Brightness Adjust the Brightness setting to get the best image. The Brothe r TWAIN Scanner dr iver offers 100 Brightne ss levels (-5 0 to 50). The default value is 0, representing an ‘average’ setting. You can set the Brightness level by dragging the slide bar to the right to lighte ...
Brother DCP-4020C - page 192

USING YOUR DCP WITH A MACINTOSH ® 13 - 14 Color Sync Dialog Perceptual Matching — All the colours of a given gamut (range of colours) are scaled proportionally to fit within anoth er gamut (printable range of colours). The pur pose is to maintain the balan ce between the colours of th e image. This is the best wa y to get realistic viewable or p ...
Brother DCP-4020C - page 193

13 - 15 USING YOUR DCP WITH A MACINTOSH ® Relative Colorimetric Matching — The colours that fall within the gamuts of both devices are left unchange d. Some colours in both images will be exactly the same, a useful outcome when colours must match quantitatively. What that means is t hat if the colour is inside the gamut, it will stay the same co ...
Brother DCP-4020C - page 194

USING YOUR DCP WITH A MACINTOSH ® 13 - 16 Using the PhotoCapture Center ™ from a Macintosh ® You can access the Media Card inserted into the DCP from a Macintosh ® . 1 Insert a SmartMedia ® , CompactFlash ® or Memory Stick ® card into your DCP. The removal disk icon will appear on the Desktop. 2 Double-click the Removable Di sk ic on. The f ...
Brother DCP-4020C - page 195

13 - 17 USING YOUR DCP WITH A MACINTOSH ® 4 Quit all applications which are running stored dat a on the media card and drag the removal disk icon onto Trash before you remove the media card from the DCP. The Photo Capture Center ™ will only read one card at a time so do not insert more than one media card at a time. Do NOT unplug the power cord, ...
Brother DCP-4020C - page 196

USING YOUR DCP WITH A MACINTOSH ® 13 - 18 Using ArcSoft ® PhotoPrinter ® 4 Arcsoft PhotoPrinter ® 4 software is for editing and printing your images including templates that aid you in printing multiple images on one page and the ability to crop, rotate and add special effects to your picture. Overview of basic steps 1 Insert the memory card (C ...
Brother DCP-4020C - page 197

13 - 19 USING YOUR DCP WITH A MACINTOSH ® 6 Select the image file and click Open . (from Mac OS 10.2.1) ...
Brother DCP-4020C - page 198

IMPORTANT INFORMATION 14 - 1 14 International E NERGY S TAR ® Compliance Sta tement As an E NERGY S TAR ® Part ner, Brother Industries, Ltd. has determined that product meets the E NERGY S TAR ® guide lines for energy efficiency. Important safety instructions 1 Read all of these instructions. 2 Save them for later reference. 3 Follow all warning ...
Brother DCP-4020C - page 199

14 - 2 IMPORTANT INFORMATION 8 This product shou ld be operated from the type of power source indicated on the label. If you are not sure of the type of power available, call your dealer or local p ower company. 9 This product is equipped with a 3- wire grou nding type plug, a plug having a third (grounding) pin. This plug will fit into only a grou ...
Brother DCP-4020C - page 200

IMPORTANT INFORMATION 14 - 3 Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademar k of Brother Industries, Ltd. PhotoCapture Center is a trademark of Brother International Corporation. MFL-Pro is registered trademarks of Brother International Corporation. © Copyright 2003 Brother Indust ...
Brother DCP-4020C - page 201

14 - 4 IMPORTANT INFORMATION IMPORTANT-For Your Safety To ensure safe operation the th ree-pin plug supplied must be inserted only into a standard three-pin power point which is effectively grounded through the n ormal household wiring. Extension cords used with the equipment must be three-cond uctor and be correctly wired to provide connection to ...
Brother DCP-4020C - page 202

TROUBLESHOOTING AND RO UTINE MAINTENANCE 15 - 1 15 Troubleshooting Error Messages As with any sophisticated office product, errors may occur. If this happens, your DCP identifies the problem and displays an error message. The most common error messages are shown below. Troubleshooting and routine maintenance ERROR MESSAGES ERROR MESSAGE CAUSE ACTIO ...
Brother DCP-4020C - page 203

15 - 2 TROUBLESHOOTING AND ROUTINE MAINTENANCE DATA REMAINS Print d ata remains in th e DCP’s memory because the compu ter is hung u p. Re-start printing fro m your computer. Print data remains in the DCP’s memory. The USB cable was unplugged while the computer was sending the data to the DCP . Press Stop/Exit . The DCP will cancel the job and ...
Brother DCP-4020C - page 204

TROUBLESHOOTING AND RO UTINE MAINTENANCE 15 - 3 Printer Jam or Paper Jam Remove the jammed paper de pending o n where it is jammed in the DCP. Paper is jammed in the paper tray. 1 Push the lever as shown below, and remove the jammed paper. Paper is jammed inside the paper tray. 1 Remove any paper from the paper tray that is no t jammed. Paper Tray ...
Brother DCP-4020C - page 205

15 - 4 TROUBLESHOOTING AND ROUTINE MAINTENANCE 2 Pull the paper tray out of the DCP. 3 Pull up the jammed paper to remove it. 4 Reinstall the paper tray. Paper Tray Jammed paper Paper Tray ...
Brother DCP-4020C - page 206

TROUBLESHOOTING AND RO UTINE MAINTENANCE 15 - 5 Paper is jammed inside the DCP. 1 Open the scanner cover by releasing the scanner cover re lease lever and lifting the scanner cover. 2 Remove the jammed paper. 3 Close the scanner cover. WARNING Do not touch the ink tube because it can cause damage to th e machine itse lf. Scanner Cover Scanner Cover ...
Brother DCP-4020C - page 207

15 - 6 TROUBLESHOOTING AND ROUTINE MAINTENANCE If you are having difficulty with your DCP If the copy looks good, the problem is probably no t your DCP. Check the chart below and follow t he troubleshooting tips. DIFFICULTY SUGGESTIONS Printer Dif f ic ulties Poor quality print. Make sure the Printer Dri ver or Paper Type setting in the menu matche ...
Brother DCP-4020C - page 208

TROUBLESHOOTING AND RO UTINE MAINTENANCE 15 - 7 Software Difficulties Cannot perform ‘2 in 1 o r 4 in 1’ printing. Check that the paper size setting in the applicati on and in the printer driver are the same. Cannot print when using P aint Brush. Try setting the Display setti ng to ‘256 co lours.’ Cannot print when using Adobe Illustrator . ...
Brother DCP-4020C - page 209

15 - 8 TROUBLESHOOTING AND ROUTINE MAINTENANCE How to improve print quality Cleaning the print he ad To ensure good print quality, the DCP will regularly clean th e print head, alternatively you can st art the cleaning process when needed. Clean the print head and ink cartridges if you get a horizontal line in the text or graphics on your prin ted ...
Brother DCP-4020C - page 210

TROUBLESHOOTING AND RO UTINE MAINTENANCE 15 - 9 STEP A: Colour block quality check The LCD shows: 4 Check the quality of the four colour blocks on the sheet. (BLACK/CYAN/YELLOW/MAGENTA). 5 If all lines are clear and visible, pre ss 1 ( YES ) to go to STEP B . — OR — If you can see missing short li nes as shown below, press 2 ( NO ). The LCD wil ...
Brother DCP-4020C - page 211

15 - 10 TROUBLESHOOTING AND ROUTINE MAINTENANCE STEP B: Alignment Check The LCD shows: 9 Check the 600 DPI and 1 200 DPI t est prints to see if number 5 most closely matches numbe r 0. If the number 5 sample of both the 600 DPI and 1200 DPI are the best matches, press 1 ( YES ) to finish STEP B . — OR — If another test print number is a better ...
Brother DCP-4020C - page 212

TROUBLESHOOTING AND ROUTINE MAINTENANCE 15 - 11 If you still see missing ink in this Print Quality Check Sheet, repeat the cleaning and test print p rocedures at least five times. If ink is still missing after the fifth cle aning and test print, replace the ink cartridge for the clogged colour. (Perhaps the ink cartridge was in your DCP over six mo ...
Brother DCP-4020C - page 213

15 - 12 TROUBLESHOOTING AND ROUTINE MAINTENANCE Checking the ink volume You can check the ink that is left in the cartridge. 1 Press Menu/Set , 4 , 3 . 2 Press to select the colour you want to check. Press Menu/Set . The LCD shows the ink volume. 3 Press Stop/Exit . INK VOLUME BLACK BLACK -+ ...
Brother DCP-4020C - page 214

TROUBLESHOOTING AND ROUTINE MAINTENANCE 15 - 13 Packing and shipping the DCP Whenever you transport the DCP, use the packaging that came with it. If you do not pa ck the DCP properly, you may void your warranty. WARNING Do NOT unplug the DCP after a print job until you hear the final click. 1 Turn the DCP’s power switch off. 2 Pull the scanner co ...
Brother DCP-4020C - page 215

15 - 14 TROUBLESHOOTING AND ROUTINE MAINTENANCE 5 Remove the paper tray from the DCP. 6 Unplug the DCP from the AC power out let. 7 Unplug the USB cable from the DCP. 8 Put all the parts in their orig inal packaging or p rotective wrapping. 9 Wrap the DCP in the plastic b ag. Paper Tray ...
Brother DCP-4020C - page 216

TROUBLESHOOTING AND ROUTINE MAINTENANCE 15 - 15 10 Place the DCP in the original box with the or iginal packaging material. 11 Pack the attachable parts an d printed materials in the box. DO NOT pack the used ink cartridges. 12 Close the carton. ...
Brother DCP-4020C - page 217

15 - 16 TROUBLESHOOTING AND ROUTINE MAINTENANCE Routine maintenance Cleaning the scanner Turn the DCP’s power switch off. Lift the document cover. Clean the scanner glass and the white film with iso propyl alcohol on a soft lint-free cloth. White Film Scanner Glass Document Cover ...
Brother DCP-4020C - page 218

TROUBLESHOOTING AND ROUTINE MAINTENANCE 15 - 17 Replacing the ink cartridges Your DCP is equipped with an ink dot counter that automatically monitors the ink level in each colour car tridge. When the counter detects an ink cartridge is out of ink, t he DCP will notify you with a message INK EMPTY on the LCD. The LCD shows you which colour cartridge ...
Brother DCP-4020C - page 219

15 - 18 TROUBLESHOOTING AND ROUTINE MAINTENANCE 5 Open the new ink cartridge bag for the colour shown on the LCD, and then take out the ink ca rtridge. 6 Each colour has its own corre ct position. Insert the ne w ink cartridge into its carriage by p ressing until it clicks. 7 After installing the ink cartridges, close the ink cartridge cover, outpu ...
Brother DCP-4020C - page 220

TROUBLESHOOTING AND ROUTINE MAINTENANCE 15 - 19 Caution ■ DO NOT remove ink cartridges if you do not need to replace them. If you do so, it may reduce the ink quantity and the printer will not know the quantity of ink left in the ca rtridge. ■ DO NOT shake the ink cartridges, b ecause the ink may spill. ■ If ink stains your body or clothing, ...
Brother DCP-4020C - page 221

S - 1 SPECIFICATIONS S Product description The DCP-4020C is a 4in1 Multi-Fu nction Center: Colour Printer, Colour Copier, Colour Scanner and PhotoCapture Center ™ . General Specifications Memory Capacity 16MB Paper Tray Up to 100 Sheets (80 g/m 2 ) Printer Type Ink Jet Print Method Piezo with 75 x 4 nozzles LCD (Liquid Crystal Displ ay) 16 ch ara ...
Brother DCP-4020C - page 222

SPECIFICATIONS S - 2 Print media Copy Photo Capture Center Paper Input Paper Tray ■ Paper type: Plain paper, inkjet paper (coated pap er), glossy pa per, transparencies and envelope s ■ Paper size: A4, Letter, Legal, A5, E xecutive, envelopes (commercial No . 10, DL, C5 Monarch), Post card, Index card. Width: 89-216 mm Height: 127-356 mm For mo ...
Brother DCP-4020C - page 223

S - 3 SPECIFICATIONS Scanner Printer Specifications and prin ted materials ar e su bject to change without pri or notice. Interface Colour/Mono Colour/Mono TWAIN Co m pliant Yes Resolution Up to 9,600 × 9,600 dpi (interpolated) Up to 600 × 2,400 dpi (optical) Scanning Speed Colour: up to 11 sec. Mono: up to 3 se c. * A4 size in 100 x 100 dpi Docu ...
Brother DCP-4020C - page 224

SPECIFICATIONS S - 4 Computer Requirements Consumable Items Minimum System Requirements Computer Platform & Operating System Version Processor Minimum Speed Minimum RAM Recommended RAM Available Hard Disk Space Drivers PhotoPrinter ® 4 Windows ® Operating System 98, 98SE Pentium 75MHz 24 MB 32 MB 150 MB 150 MB Me Pentium 150MHz 32 MB 64 MB 20 ...
Brother DCP-4020C - page 225

I - 1 INDEX Index The items in the upper case represent LCD messages. B Brother Control Center using and configuring .... 10-1 C cleaning print head ....................... 15-8 scanner ........................ 15-16 Colour Enhance PhotoCapture Center ™ .. 6-18 Print ............................... 8-13 control panel, overview ....... 1-6 copy br ...
Brother DCP-4020C - page 226

INDEX I - 2 N Near Edge Print .................................. 8-8 O Options key (copying) Brightness ........................ 5-8 Paper Size ........................ 5-8 Paper Type ....................... 5-7 P Paper .......................... 2-1, S-2 capacity ............................ 2-2 Type ................................. 4-1 PaperPort ...
Brother DCP-4020C - page 227

UK/IRE/SAF/ P AN NORDIC ...

Produzent Brother Kategorie Printer

Dokumente, die wir vom Produzenten des Geräts Brother DCP-4020C erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Brother
- Bedienungsanleitungen DCP-4020C
- Produktkarten Brother
- Informationsbroschüren
- oder Energieetiketten Brother DCP-4020C
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Brother DCP-4020C.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Brother DCP-4020C, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Brother DCP-4020C. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Brother DCP-4020C ansehen.

Haben Sie eine Frage bezüglich Brother DCP-4020C?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Brother DCP-4020C nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Brother DCP-4020C hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Bedienungsanleitung Brother DCP-4020C

Summary

Brother DCP-4020C - page 1

Brother DCP-4020C - page 2

Brother DCP-4020C - page 3

Brother DCP-4020C - page 4

Brother DCP-4020C - page 5

Brother DCP-4020C - page 6

Brother DCP-4020C - page 7

Brother DCP-4020C - page 8

Brother DCP-4020C - page 9

Brother DCP-4020C - page 10

Brother DCP-4020C - page 11

Brother DCP-4020C - page 12

Brother DCP-4020C - page 13

Brother DCP-4020C - page 14

Brother DCP-4020C - page 15

Brother DCP-4020C - page 16

Brother DCP-4020C - page 17

Brother DCP-4020C - page 18

Brother DCP-4020C - page 19

Brother DCP-4020C - page 20

Brother DCP-4020C - page 21

Brother DCP-4020C - page 22

Brother DCP-4020C - page 23

Brother DCP-4020C - page 24

Brother DCP-4020C - page 25

Brother DCP-4020C - page 26

Brother DCP-4020C - page 27

Brother DCP-4020C - page 28

Brother DCP-4020C - page 29

Brother DCP-4020C - page 30

Brother DCP-4020C - page 31

Brother DCP-4020C - page 32

Brother DCP-4020C - page 33

Brother DCP-4020C - page 34

Brother DCP-4020C - page 35

Brother DCP-4020C - page 36

Brother DCP-4020C - page 37

Brother DCP-4020C - page 38

Brother DCP-4020C - page 39

Brother DCP-4020C - page 40

Brother DCP-4020C - page 41

Brother DCP-4020C - page 42

Brother DCP-4020C - page 43

Brother DCP-4020C - page 44

Brother DCP-4020C - page 45

Brother DCP-4020C - page 46

Brother DCP-4020C - page 47

Brother DCP-4020C - page 48

Brother DCP-4020C - page 49

Brother DCP-4020C - page 50

Brother DCP-4020C - page 51

Brother DCP-4020C - page 52

Brother DCP-4020C - page 53

Brother DCP-4020C - page 54

Brother DCP-4020C - page 55

Brother DCP-4020C - page 56

Brother DCP-4020C - page 57

Brother DCP-4020C - page 58

Brother DCP-4020C - page 59

Brother DCP-4020C - page 60

Brother DCP-4020C - page 61

Brother DCP-4020C - page 62

Brother DCP-4020C - page 63

Brother DCP-4020C - page 64

Brother DCP-4020C - page 65

Brother DCP-4020C - page 66

Brother DCP-4020C - page 67

Brother DCP-4020C - page 68

Brother DCP-4020C - page 69

Brother DCP-4020C - page 70

Brother DCP-4020C - page 71

Brother DCP-4020C - page 72

Brother DCP-4020C - page 73

Brother DCP-4020C - page 74

Brother DCP-4020C - page 75

Brother DCP-4020C - page 76

Brother DCP-4020C - page 77

Brother DCP-4020C - page 78