Bedienungsanleitung Apple 073-0800

13 Seiten 0.26 mb
Download

Zur Seite of 13

Summary
  • Apple 073-0800 - page 1

    073-0800 Re v . A  Power Mac G4 Lower Fan Replacement Instructions F ollow the instructions in this sheet carefully . F ailure to f ollo w these instructions could damage your equipment and v oid its w arranty . Note: Written and video instructions covering customer-installab le par ts are av ailab le at http://www .info .apple.com/installpar ts ...

  • Apple 073-0800 - page 2

    Power Mac G4 (Mirrored Drive Doors) Lower Fan - 2 6. T ouch the metal PCI access cov ers on the back of the computer . (Figure 1) Important: To avoid electrostatic discharge, always ground yourself by touching the port access covers before you touch any parts or install any components inside the computer. To avoid static electricity building back u ...

  • Apple 073-0800 - page 3

    Power Mac G4 (Mirrored Drive Doors) Lower Fan - 3 7. Unplug the pow er cord. (Figure 2) W arning: Never plug in the power cor d or turn on y our computer unless all of its internal and external parts are in place and it is closed. Operating the computer when it is open or missing parts can damage your computer or cause injury . Make sure the po wer ...

  • Apple 073-0800 - page 4

    Power Mac G4 (Mirrored Drive Doors) Lower Fan - 4 Removing the Installed F an 1. Slide the back panel off the optical driv e carrier . (Figure 3) Figure 3 2. Remov e the two scre ws that secure the optical driv e carrier to the chassis. (Figure 4) Figure 4 ...

  • Apple 073-0800 - page 5

    Power Mac G4 (Mirrored Drive Doors) Lower Fan - 5 3. Slide the carrier back and rotate it so that you can reach the driv e cab les. 4. Disconnect the drive data and pow er cab les (P6 and P7) from the back of the optical drive(s) and remov e the carr ier from the computer . (Figure 5) Figure 5 ...

  • Apple 073-0800 - page 6

    Power Mac G4 (Mirrored Drive Doors) Lower Fan - 6 5. Disconnect the A T A r ibbon cab le from the logic board. (Figure 6) Figure 6 6. Disconnect the second A T A r ibbon cab le from the logic board and f old it bac k to e xpose the low er f an cable connector . (Figure 7) Figure 7 ...

  • Apple 073-0800 - page 7

    Power Mac G4 (Mirrored Drive Doors) Lower Fan - 7 7. Caution: The locking tab on the f an connector is delicate. If the locking tab breaks, the connector should still be usable . Howe v er , use a gentle touch when disconnecting the f an connector . Using a small flat-blade screwdriver, gently lift up the locking tab on the lower fan cable as you d ...

  • Apple 073-0800 - page 8

    Power Mac G4 (Mirrored Drive Doors) Lower Fan - 8 Installing the Replacement F an 1. Using needlenose pliers or a flat-blade scre wdriver , remov e the f our plastic pegs from the detachable finger guard and f an. (Figure 10) Figure 10 2. Use the f our screws pro vided with the replacement f an to secure the finger guard to the replacement f an. ...

  • Apple 073-0800 - page 9

    Power Mac G4 (Mirrored Drive Doors) Lower Fan - 9 3. Install the replacement f an as f ollows: Replacement Caution: Position the replacement fan as shown so that the fan cable routes along the bottom of the fan, and the cable connector faces the logic board. (The replacement fan is rotated 90 degrees clockwise from the original fan.) Make sure cabl ...

  • Apple 073-0800 - page 10

    Power Mac G4 (Mirrored Drive Doors) Lower Fan - 10 5. Reinstall the optical drive carrier as follo ws: Replacement Note: Before sliding the carrier back onto the optical drive shelf, make sure the power cable bundle at the side panel are routed in the recessed channel. (Figure 13) Figure 13 Replacement Note: When sliding the carrier back onto the o ...

  • Apple 073-0800 - page 11

    Power Mac G4 (Mirrored Drive Doors) Lower Fan - 11 Connect the cables to the optical drive. (Figure 15) Figure 15 ...

  • Apple 073-0800 - page 12

    Power Mac G4 (Mirrored Drive Doors) Lower Fan - 12 Replacement Note: Before sliding the rear panel back onto the carrier, make sure the top lip of the panel engages with the top edge of the drive carrier. (Figure 16) Caution: Be careful not to pinch the power cable between the panel and the carrier. Figure 16 Install the two optical drive carrier s ...

  • Apple 073-0800 - page 13

    Power Mac G4 (Mirrored Drive Doors) Lower Fan - 13 Closing the Computer 1. Check that the scre ws remo v ed from the computer hav e been reinstalled and that all internal cables are connected. 2. Raise the side access panel, lift the latch, and press the panel against the case until it snaps securely into place. 3. Reconnect all cables and restart ...

Produzent Apple Kategorie Personal Computer

Dokumente, die wir vom Produzenten des Geräts Apple 073-0800 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Apple
- Bedienungsanleitungen 073-0800
- Produktkarten Apple
- Informationsbroschüren
- oder Energieetiketten Apple 073-0800
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Apple 073-0800.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Apple 073-0800, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Apple 073-0800. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Apple 073-0800 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Apple 073-0800, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Apple 073-0800 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Apple 073-0800 verständlich ist.

Eine gänzliche Bedienungsanleitung von Apple sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Apple 073-0800 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Apple 073-0800 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Apple 073-0800, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Apple 073-0800 - die uns die ersten Schritte während der Nutzung von Apple 073-0800 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Apple 073-0800 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Apple 073-0800 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Apple 073-0800?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Apple 073-0800 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Apple 073-0800 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)