Bedienungsanleitung Zenoah BCZ3000DW

16 Seiten 0.67 mb
Download

Zur Seite of 16

Summary
  • Zenoah BCZ3000DW - page 1

    GB-1 G B BCZ3000DL / BCZ3000DW BCZ3000DL BCZ3000DW G B OWNER’S MANUAL BRUSHCUTTERS 848JC293A0 (311) ...

  • Zenoah BCZ3000DW - page 2

    GB-2 BCZ3000DL / BCZ3000DW EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS W ARNING!!! RISK OF DAMAGING HEARING IN NORMAL CONDITIONS OF USE, THIS MACHINE MA Y INVOL VE A DAIL Y LEVEL OF PERSONAL EXPOSURE TO NOISE FOR THE OPERA TOR EQUAL TO OR GREA TER THAN 85 dB(A) 29.5 cm 3 SOUND LEVEL VIBRA TION LEVEL ISO 10884 LwA measured 95.2 dB(A) 95.5 dB(A) gua ...

  • Zenoah BCZ3000DW - page 3

    GB-3 G B BCZ3000DL / BCZ3000DW SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury , and for this reason you are requested to read all such instructions carefully and follow them without fail. W ARNINGS IN THE ...

  • Zenoah BCZ3000DW - page 4

    GB-4 BCZ3000DL / BCZ3000DW 2. Specification BCZ3000DL / BCZ3000DW Overall size (L  W  H) ............................. 1860 x 395 x 325 / 1860 x 610 x 520 mm Dry weight .................................................................................................. 5.7 / 7.1 kg Engine Model .................................................. ...

  • Zenoah BCZ3000DW - page 5

    GB-5 G B BCZ3000DL / BCZ3000DW 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later when- ever any questions arise. Also note, if you have any questions which cannot be answered herein, contact the dealer fr o ...

  • Zenoah BCZ3000DW - page 6

    GB-6 BCZ3000DL / BCZ3000DW ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. W ARNING Never place the throttle into the high-speed position when starting the engine. 3. After starting the engine, check to make sure that the cutting at- tachment stops rotating when the throttle is moved ...

  • Zenoah BCZ3000DW - page 7

    GB-7 G B BCZ3000DL / BCZ3000DW could result in serious burns or elec- trical shock. • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W ar n adults to keep pets and children away fr om the area. Be car eful if you ar e ap- proached. Injury may result fr om flying debris. 2. If someone calls out or otherwise interrupts you ...

  • Zenoah BCZ3000DW - page 8

    GB-8 BCZ3000DL / BCZ3000DW INST ALLING HANDLE (BC3000DL) • Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. INST ALLING HANDLE (BC3000DW) 1. Loosen the 4bolts on the upper cap and insert the handles equally . Retighten the bolts. 2. Put the handle assembly into the bracket and put the upper cap over it. Ti ...

  • Zenoah BCZ3000DW - page 9

    GB-9 G B BCZ3000DL / BCZ3000DW ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 • Exhaust emission are controlled by the funda- mental engine parameters and components (eq., carburation, ignition timing and port timing) with- out addition of any major hardware or the intro- duction of an inert material during combustion. • These engines are ce ...

  • Zenoah BCZ3000DW - page 10

    GB-10 BCZ3000DL / BCZ3000DW ST AR TING ENGINE W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects, as it will start rotating upon starting of the engine. 3. ...

  • Zenoah BCZ3000DW - page 11

    GB-11 G B BCZ3000DL / BCZ3000DW ADJUSTING THROTTLE CABLE • The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle adjusting screw 1. When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise. 2. W ...

  • Zenoah BCZ3000DW - page 12

    GB-12 BCZ3000DL / BCZ3000DW W ARNING CONTROLLING BLADE BOUNCE •K ick out can cause serious personal injury . Car efully study this section. It is important that you understand what causes kick out, how you can reduce the chance of kick out and how you can remain in contr ol of the unit if kick out does occur . 1. What causes kick out: • Kick ou ...

  • Zenoah BCZ3000DW - page 13

    GB-13 G B BCZ3000DL / BCZ3000DW 2. Y ou can avoid thrown debris by sweeping from your left to the right. 3. Use a slow , deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will r equire slower action than will light growth. 4. Never swing the unit so hard as you ar e in danger of lo ...

  • Zenoah BCZ3000DW - page 14

    GB-14 BCZ3000DL / BCZ3000DW AIR FIL TER • The air filter , if clogged, will reduce the engine perfor - mance. Check and clean the filter element in warm, soapy water as requir ed. Dr y completely before in- stalling. If the element is broken or shrunk, r eplace with a new one. FUEL FIL TER • When the engine runs short of fuel supply , check the ...

  • Zenoah BCZ3000DW - page 15

    GB-15 G B BCZ3000DL / BCZ3000DW IMPORT ANT • Note that using any spark plug other than those des- ignated may result in the engine failing to operate prop- erly or in the engine becoming overheated and dam- aged. • To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench. ...

  • Zenoah BCZ3000DW - page 16

    GB-16 BCZ3000DL / BCZ3000DW 11. T r oubleshooting guide Case 1. Starting failure CHECK PROBABLE CAUSES ACTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter is clogged → clean carburetor adjustment scr ew → out of normal range → adjust to normal range sparking (no spark) → spark plug is fouled/wet ...

Produzent Zenoah Kategorie Brush Cutter

Dokumente, die wir vom Produzenten des Geräts Zenoah BCZ3000DW erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Zenoah
- Bedienungsanleitungen BCZ3000DW
- Produktkarten Zenoah
- Informationsbroschüren
- oder Energieetiketten Zenoah BCZ3000DW
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Zenoah BCZ3000DW.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Zenoah BCZ3000DW, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Zenoah BCZ3000DW. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Zenoah BCZ3000DW ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Zenoah BCZ3000DW, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Zenoah BCZ3000DW hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Zenoah BCZ3000DW verständlich ist.

Eine gänzliche Bedienungsanleitung von Zenoah sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Zenoah BCZ3000DW bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Zenoah BCZ3000DW befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Zenoah BCZ3000DW, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Zenoah BCZ3000DW - die uns die ersten Schritte während der Nutzung von Zenoah BCZ3000DW erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Zenoah BCZ3000DW hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Zenoah BCZ3000DW im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Zenoah BCZ3000DW?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Zenoah BCZ3000DW nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Zenoah BCZ3000DW hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)