Bedienungsanleitung GE PB975

12 Seiten 0.34 mb
Download

Zur Seite of 12

Summary
  • GE PB975 - page 1

    1 31-10652 02-07 JR Installation Free-Standing Instructions Electric Ranges Models PB970, PB975 BEFORE YOU BEGIN Read these instructions completely and carefully . • IMPOR T ANT — Save these instructions for local inspector’ s use. • IMPOR T ANT — Observe all governing codes and ordinances. • Note to Installer – Be sure to leave these ...

  • GE PB975 - page 2

    TOOLS YOU WILL NEED FOR YOUR SAFETY : All rough-in and spacing dimensions must be met for safe use of your range. T o reduce the risk of burns or fire when reaching over hot surface elements, cabinet storage space above the cooktop should be avoided. If cabinet storage space is to be provided above the cooktop, the risk can be reduced by installing ...

  • GE PB975 - page 3

    3 Installation Instructions PREP ARE THE OPENING See illustrations for all rough-in and spacing dimensions. The range may be placed with 0” clearance (flush) at the back wall and side walls of the cabinet. NOTE: Use a 4 ′ power cord to prevent interference. Power cords 4 1 ⁄ 2 to 6 ′ long may have to be dressed to allow for proper installat ...

  • GE PB975 - page 4

    4 Installation Instructions ELECTRICAL CONNECTIONS Y ou must use a 3-wire, single-phase A.C. 208Y/120 V olt or 240/120 V olt, 60 hertz electrical system. If the electrical service provided does not meet the above specifications, have a licensed electrician install an approved outlet. Use only a 3-conductor or a 4-conductor UL-listed range cord. The ...

  • GE PB975 - page 5

    5 Installation Instructions POWER CORD AND STRAIN RELIEF INST ALLA TION Remove the terminal block cover (on the back of the range) by removing the screw , using a 1/4” nut driver . Do not discard the screw . Remove the knockout ring (1 3 ⁄ 8 ″ ) located on bracket directly below the terminal block. T o remove the knockout, use a pair of plier ...

  • GE PB975 - page 6

    6 Installation Instructions ELECTRICAL CONNECTIONS (CONT .) 4-WIRE POWER CORD INST ALLA TION W ARNING: The neutral wire of the supply circuit must be connected to the neutral terminal located in the lower center of the terminal block. The power leads must be connected to the lower left and the lower right terminals of the terminal block. The 4th gr ...

  • GE PB975 - page 7

    7 Installation Instructions 3-WIRE CONDUIT INST ALLA TION Loosen the 3 lower terminal screws from the terminal block. Insert the center bare wire (white/neutral) tip through the bottom center terminal block opening. On certain models, the wire will need to be inserted through the ground strap opening and then into the bottom center block opening. I ...

  • GE PB975 - page 8

    8 Installation Instructions INST ALL THE RANGE ANTI-TIP DEVICE INST ALLA TION An Anti-T ip bracket is supplied with instructions for installation in a variety of locations. The instructions include all necessary information to complete the installation. Read the Safety Instructions and the instructions that fit your situation before beginning insta ...

  • GE PB975 - page 9

    LEVEL THE RANGE Install the oven shelves in the oven and position the range where it will be installed. Check for levelness by placing a spirit level or a cup, partially filled with water , on one of the oven shelves. If using a spirit level, take two readings—with the level placed diagonally first in one direction and then the other . The front ...

  • GE PB975 - page 10

    10 Notes ...

  • GE PB975 - page 11

    11 Notes ...

  • GE PB975 - page 12

    12 Printed in the United States ...

Produzent GE Kategorie Range

Dokumente, die wir vom Produzenten des Geräts GE PB975 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen GE
- Bedienungsanleitungen PB975
- Produktkarten GE
- Informationsbroschüren
- oder Energieetiketten GE PB975
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung GE PB975.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen GE PB975, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen GE PB975. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts GE PB975 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts GE PB975, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von GE PB975 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von GE PB975 verständlich ist.

Eine gänzliche Bedienungsanleitung von GE sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von GE PB975 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von GE PB975 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich GE PB975, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts GE PB975 - die uns die ersten Schritte während der Nutzung von GE PB975 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit GE PB975 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von GE PB975 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich GE PB975?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit GE PB975 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit GE PB975 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)