Deutsch dropdown-ico

Bedienungsanleitung Asus Rampage II Extreme

196 Seiten Betrifft nicht
Download

Zur Seite of 196

Summary
  • Asus Rampage II Extreme - page 1

    Motherboard Rampage II Extreme ...

  • Asus Rampage II Extreme - page 2

    ii E4268 Second Edition V2 October 2008 Copyright © 2008 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the pu ...

  • Asus Rampage II Extreme - page 3

    iii Contents Contents ...................................................................................................... iii Notices ....................................................................................................... viii Safety information ..................................................................................... ...

  • Asus Rampage II Extreme - page 4

    iv Contents 2.5.4 PCI slots ........................................................................ 2-24 2.5.5 PCI Express x1 slots ..................................................... 2-24 2.5.6 PCI Express 2.0 x16 slots ............................................. 2-24 2.6 Jumpers ............................................................... ...

  • Asus Rampage II Extreme - page 5

    v Contents 3.2.8 Scroll bar ........................................................................3-1 1 3.2.9 General help .................................................................. 3-1 1 3.3 Extreme T weaker menu ............................................................. 3-12 3.3.1 Congure System Performance Settings .............. ...

  • Asus Rampage II Extreme - page 6

    vi Contents 3.8.2 ASUS O.C. Prole ......................................................... 3-45 3.8.3 AI NET 2 ........................................................................ 3-46 3.8.4 BIOS Flashback ............................................................ 3-47 3.9 Exit menu ........................................................ ...

  • Asus Rampage II Extreme - page 7

    vii Contents Chapter 5: Multiple GPU technology support 5.1 A TI ® CrossFireX™ technology .................................................... 5-1 5.1.1 Requirements .................................................................. 5-1 5.1.2 Before you begin ............................................................. 5-1 5.1.3 Installing two ...

  • Asus Rampage II Extreme - page 8

    viii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has ...

  • Asus Rampage II Extreme - page 9

    ix Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all ...

  • Asus Rampage II Extreme - page 10

    x Where to nd more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. 2. Optional documentation Y our product package may include optional documenta ...

  • Asus Rampage II Extreme - page 11

    xi Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. T ypography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase. <Key> Key s encl osed i n the less- than a nd gre ater-t han s ign mea ns tha t you ...

  • Asus Rampage II Extreme - page 12

    xii Rampage II Extreme specications summary CPU LGA1366 socket for Intel ® Core™ i7 Processor Extreme Edition / Core™ i7 Processor Supports Intel ® Dynamic Speed T echnology Supports Intel ® Smart Cache * Refer to www .asus.com for Intel ® CPU support list. Chipset Intel ® X58 / ICH10R System Bus Up to 6.4GT/s; Intel ® QuickPath Interc ...

  • Asus Rampage II Extreme - page 13

    xiii USB 12 x USB 2.0 ports (6 ports at midboard; 6 ports at back panel) ROG Exclusive Overclocking Features T weakIt ProbeIt Extreme Engine with ML Cap - 16-phase power design for CPU - 3-phase QPI/DRAM power design - 3-phase power design for Northbridge - 3-phase power design for Memory - ML Caps on CPU, NB, and memory respectively CPU Level Up i ...

  • Asus Rampage II Extreme - page 14

    xiv Internal I/O Connectors 3 x USB connectors support additional 6 USB ports 1 x Floppy disk drive connector 1 x IDE connector 6 x SA T A connectors (Blue) 1 x SA T A connector (Black) 1 x CPU Fan connector 3 x Chassis Fan connectors 1 x Power Fan connector 3 x Optional Fan connectors 8 x Probe connectors 3 x Thermal sensor connectors 1 x BIOS Fla ...

  • Asus Rampage II Extreme - page 15

    1 Chapter 1: Product introduction This chapter describes the motherboard features and the new technologies it supports. ...

  • Asus Rampage II Extreme - page 16

    ROG Rampage II Extreme Chapter summary 1 1.1 Welcome! ...................................................................................... 1-1 1.2 Package contents ......................................................................... 1-1 1.3 Special features ............................................................................ 1-2 ...

  • Asus Rampage II Extreme - page 17

    ROG Rampage II Extreme 1-1 1.1 Welcome! Thank you for buying an ROG Rampage II Extreme motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your packag ...

  • Asus Rampage II Extreme - page 18

    1-2 Chapter 1: Product Introduction 1.3 Special features 1.3.1 Product highlights Republic of Gamers The Republic of Gamers consists only the best of the best. We of fer the best hardware engineering, the fastest performance, the most innovating ideas, and we welcome the best gamers to join in. In the Republic of Gamers, mercy rules are only for th ...

  • Asus Rampage II Extreme - page 19

    ROG Rampage II Extreme 1-3 SLI and CrossFireX on Demand Fret no longer because with the ROG motherboard, you’ll be able to run both multi-GPU setups. This motherboard features SLI and CrossFireX on Demand technology , supporting up to three graphics cards in a 3-Way SLI or CrossFireX conguration. Whichever path you take, you can be assured of ...

  • Asus Rampage II Extreme - page 20

    1-4 Chapter 1: Product Introduction High Denition Audio Enjoy high-end sound quality on your PC! The onboard 8-channel HD audio (High Denition Audio, previously codenamed Azalia) CODEC enables high-quality 192KHz/24-bit audio output, jack-sensing feature, retasking functions, and multi- streaming technology that simultaneously sends different ...

  • Asus Rampage II Extreme - page 21

    ROG Rampage II Extreme 1-5 1.3.2 ROG Intelligent Performance & Overclocking features T weakIt  T weakIt is designed for control freaks. Following the success of the Extreme T weaker overclocking feature, ASUS has engineered T weakIt to give users exible overclocking control even when running benchmark programs! The joystick-like control p ...

  • Asus Rampage II Extreme - page 22

    1-6 Chapter 1: Product Introduction BIOS Flashback BIOS1 BIOS2 Overclocker’s prayer to have BIOS exibility is answered! With the new BIOS Flashback, PC enthusiasts can overclock with even more condence. BIOS Flashback gives overclockers the ability to save two versions of the BIOS simultaneously . V ery much like the “SaveGame” function ...

  • Asus Rampage II Extreme - page 23

    ROG Rampage II Extreme 1-7 1.3.3 ROG unique features SupremeFX X-Fi features Y ou may enjoy good quality sound from the thoughtful design of SupremeFX card on a hardware level. Activating X-Fi CMSS3D and Crystalizer will enable accurate virtual 3D surround sound and enhancement on sound quality experience. Y ou will be able to experience realistic ...

  • Asus Rampage II Extreme - page 24

    1-8 Chapter 1: Product Introduction 1.3.4 ASUS special features ASUS Quiet Thermal Solution ASUS Quiet Thermal solution makes system more stable and enhances the overclocking capability . Fanless Design—Stack Cool 2 ASUS Stack Cool 2 is a fan-less and zero-noise cooling solution that lowers the temperature of critical heat generating components. ...

  • Asus Rampage II Extreme - page 25

    ROG Rampage II Extreme 1-9 Optional Fan The optional fan is specically designed to provide sufcient airow over the CPU power modules and chipset area when water-cooling or passive-cooling is utilized, ensuring effective heat dissipation for the entire system. See page 2-46 for details. ASUS MyLogo 3 ASUS MyLogo 3 is a new feature present i ...

  • Asus Rampage II Extreme - page 26

    1-10 Chapter 1: Product Introduction ...

  • Asus Rampage II Extreme - page 27

    2 Chapter 2: Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. ...

  • Asus Rampage II Extreme - page 28

    ROG Rampage II Extreme Chapter summary 2 2.1 Before you proceed ..................................................................... 2-1 2.2 Motherboard overview ................................................................. 2-6 2.3 Central Processing Unit (CPU) ................................................... 2-9 2.4 System memory ......... ...

  • Asus Rampage II Extreme - page 29

    2.1 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling ...

  • Asus Rampage II Extreme - page 30

    Onboard LEDs The motherboard comes with LEDs that indicate the voltage conditions of CPU, memory , northbridge, and southbridge. Y ou may adjust the voltages in BIOS. There are also an LED for hard disk drive activit y and an onboa rd switch for power status. For more information about voltage adjustment, refer to 3.3 Extreme T weaker menu . 1. CPU ...

  • Asus Rampage II Extreme - page 31

    2. Northbridge/Southbridge LEDs The northbridge and southbridge LEDs each have two different voltage displays. The northbridge LED displays either the IOH V oltage or the IOH PCIE V oltage. The southbridge LED shows either the ICH V oltage or the ICH PCIE V oltage. Y ou can select the voltage to display in BIOS. Refer to the illustration below for ...

  • Asus Rampage II Extreme - page 32

    4. Hard Disk LED The hard disk LED is designed to indicate the hard disk activity . It blinks when data is being written into or read from the hard disk drive. The LED does not light up when there is no hard disk drive connected to the motherboard or when the hard disk drive does not function. 3. Memory LED Refer to the illustration below for the l ...

  • Asus Rampage II Extreme - page 33

    6. BIOS LED When the BIOS backup starts, the system will enter the soft-off state and the BIOS LED will blink to indicate that the backup is proceeding. Refer to 3.8.4 BIOS Flashback for further information. 5. Power LED The motherboard comes with a power-on switch that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode ...

  • Asus Rampage II Extreme - page 34

    2.2 Motherboard overview 2.2.1 Motherboard layout 2.2.2 SupremeFX X-Fi audio card layout S UPREME FX Listen with Absolutely HD X - Fi Refer to pages 2-29 and 2-37 for details about the audio jacks and connectors on this card. 2-6 Chapter 2: Hardware information ...

  • Asus Rampage II Extreme - page 35

    Refer to 2.7 Connectors for more information about rear panel connectors and internal connectors. 2.2.3 Layout contents Connectors/Jumpers/Switches/Slots Page 1. CPU, chassis, power and optional fan connectors (4-pin CPU_F AN; 3-pin CHA_F AN1–3; 3-pin PWR_F AN; 3-pin OPT_F AN1–3) 2-35 2. A TX power connectors (24-pin EA TXPWR, 8-pin EA TX12V) 2 ...

  • Asus Rampage II Extreme - page 36

    DO NOT overtighten the screws! Doing so can damage the motherboard. 2.2.4 Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below . 2.2.5 Screw holes Place nine (9) screws into the h ...

  • Asus Rampage II Extreme - page 37

    2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1366 socket designed for the Intel ® Core™ i7 Processor Extreme Edition / Core™ i7 Processor . • Upon purchase of the motherboard, make sure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap i ...

  • Asus Rampage II Extreme - page 38

    2.3.1 Installing the CPU T o install a CPU: 1. Locate the CPU socket on the motherboard. T o prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. B A Load lever Retention tab Before installi ...

  • Asus Rampage II Extreme - page 39

    3. Lift the load lever in the direction of the arrow to a 135º angle. 4. Lift the load plate with your thumb and forenger to a 100º angle. Load plate 4 3 The CPU ts in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 6. Position the CPU over the socket, ...

  • Asus Rampage II Extreme - page 40

    8. Close the load plate (A), and then push the load lever (B) until it snaps into the retention tab. A B 7. Apply several drops of thermal paste to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is spread in an even thin layer . Some heatsinks come with pre- applied thermal paste. If so, skip this step. The ...

  • Asus Rampage II Extreme - page 41

    2.3.2 Installing the CPU heatsink and fan The Intel ® LGA1366 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. • When you buy a boxed Intel ® processor , the package includes the CPU fan and heatsink assembly . If you buy a CPU separately , make sure that you use only Intel ? ...

  • Asus Rampage II Extreme - page 42

    3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector . 2.3.3 Uninstalling the CPU heatsink and fan T o uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the mot ...

  • Asus Rampage II Extreme - page 43

    2.4 System memory 2.4.1 Overview The motherboard comes with six Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for better performance with less power consumption. Th ...

  • Asus Rampage II Extreme - page 44

    2.4.2 Memory congurations Y ou may install 1GB and 2GB unbuffered non-ECC DDR3 DIMMs into the DIMM sockets. • The default memory operation frequency is dependent on its SPD. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. T o operate at the vendor-marked or at a highe ...

  • Asus Rampage II Extreme - page 45

    Rampage II Extreme Motherboard Qualied V endors Lists (QVL) DDR3-1800 MHz capability V endor Part No. Size SS/DS Chip No. CL Chip Brand DI MM s ock et su ppor t ( Opti ona l) A* B* Apacer BoxP/N:DH.02GAL.F7LK2 (78.0AGCB.BN0) 2048MB (Kit of 2) SS Heat-Sink Package 7-7-7-20 N/A V CORSAIR BoxP/N:TWIN3X2048-1800C7DF (CM3X1024-1800C7D) 2048MB (Kit of ...

  • Asus Rampage II Extreme - page 46

    Rampage II Extreme Motherboard Qualied V endors Lists (QVL) DDR3-1600 MHz capability V endor Part No. Size SS/DS Chip No. CL Chip Brand DI MM s ock et su ppor t ( Opti ona l) A* B* CORSAIR Box P/N:TWIN3X2048-1600C7DHXIN (CM3X1024-1600C7DHXIN) (XMP) 2048MB (Kit of 2) SS Heat-Sink Package 7 N/A V V CORSAIR BoxP/N:TW3X4G1600C9DHXNV (CM3X2G1600C9DHX ...

  • Asus Rampage II Extreme - page 47

    Rampage II Extreme Motherboard Qualied V endors Lists (QVL) DDR3-1333 MHz capability V endor Part No. Size SS/DS Chip No. CL Chip Brand DIMM socket support (Optional) A* B* C* D* A-DA TA SC63I1B16 2048MB DS K4B1G0846D 9 SAMSUNG V V V V CORSAIR BoxP/N:TW3X4G1333C9DHX (CM3X2048-1333C9DHX) 4096MB (Kit of 2) DS Heat-Sink Package 9-9-9-24 N/A V V COR ...

  • Asus Rampage II Extreme - page 48

    Rampage II Extreme Motherboard Qualied V endors Lists (QVL) DDR3-1066 MHz capability V endor Part No. Size SS/DS Chip No. CL Chip Brand DIMM socket support (Optional) A* B* C* D* CORSAIR CM3X1024-1066C7 1024MB DS Heat-Sink Package 7 N/A V V V Crucial CT12864BA1067.8SFB 1024MB SS Z9HWQ 7 MICRON V V V V Crucial CT12864BA1067.8SFD 1024MB SS D9JNL 7 ...

  • Asus Rampage II Extreme - page 49

    2.4.4 Removing a DIMM Follow these steps to remove a DIMM. 1. Simultaneously press the retaining clips outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your ngers when pressing the retaining clips. The DIMM might get damaged when it ips out with extra force. 2.4.3 Installing a DIMM DIMM notch 1 1 2 ...

  • Asus Rampage II Extreme - page 50

    2.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. 2.5.1 Installing an expansion card T o install an expansion card: 1. Before installing the expansion card, read the documentation that came with it and make the necessary hardware setti ...

  • Asus Rampage II Extreme - page 51

    2.5.3 Interrupt assignments Standard interrupt assignments IRQ assignments for this motherboard A B C D E F G H PCI slot 1 shared – – – – – – – LAN (8056) shared – – – – – – – SA T A (JMB363) shared – – – – – – – LAN (8056) – shared – – – – – – PCIe x16_1 shared – – – – – – – PCI ...

  • Asus Rampage II Extreme - page 52

    2.5.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications. Refer to the gure below for the location of the slot. 2.5.5 PCI Express x1 slots This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply with the PCI Express specicat ...

  • Asus Rampage II Extreme - page 53

    • In single VGA card mode, use rst the PCIe 2.0 x16_1 slot (blue) for a PCI Express x16 graphics card to get better performance. • In CrossFireX™ mode, use the PCIe 2.0 x16_1 (blue) and PCIe 2.0 x16_2 (blue) slots for PCI Express x16 graphics cards to get better performance. • Use the three PCIe 2.0 x16 slots for 3-W ay CrossFireX™ mod ...

  • Asus Rampage II Extreme - page 54

    2.6 Jumpers 1. Clear RTC RAM (3-pin CLRTC_SW) This jumper allows you to enable the clr CMOS switch on the back I/O. Y ou can clear the CMOS memory and system setup parameters by erasing the CMOS RTC RAM data. The clr CMOS switch on the back I/O helps you easily clear the system setup information such as system passwords. T o erase the RTC RAM: 1. P ...

  • Asus Rampage II Extreme - page 55

    2. BIOS ash setting (6-pin BIOS_FLASHBACK) T wo sets of BIOS Flash ROM (BIOS 1 and BIOS 2) are present on this motherboard. This jumper allows you to select either BIOS as the one to boot, or back up or restore BIOS content from one ROM to the other . Moving the jumper cap to pins 1-2 (default) allows you to enter BIOS MENU to select which BIOS ...

  • Asus Rampage II Extreme - page 56

    2.7 Connectors 2.7.1 Rear panel connectors 1. PS/2 keyboard port (purple). This port is for a PS/2 keyboard. 2. LAN 2 (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED indications. 3. IEEE 1394a port. This 6-pin IEEE 1394a port provides high-speed con ...

  • Asus Rampage II Extreme - page 57

    5. Line In port (light blue). This port connects the tape, CD, DVD player , or other audio sources. 6. Line Out port (lime). This port connects a headphone or a speaker . In 4-channel, 6-channel, and 8-channel conguration, the function of this port becomes Front Speaker Out. 7. Microphone port (pink). This port connects a microphone. 8. Center/S ...

  • Asus Rampage II Extreme - page 58

    2.7.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided oppy disk drive (FDD) signal cable. Insert one end of the cable to this connector , then connect the other end to the signal connector at the back of the oppy disk drive. Pin 5 on the connector is removed to prevent incorrect cable co ...

  • Asus Rampage II Extreme - page 59

    Drive jumper setting Mode of device(s) Cable connector Single device Cable-Select or Master - Black T wo devices Cable-Select Master Black Slave Gray Master Master Black or gray Slave Slave • Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA cable connector . This prevents incorrect insertion when you connect the I ...

  • Asus Rampage II Extreme - page 60

    3. ICH10R Serial A T A connectors (7-pin SA T A 1-6 [blue]) These connectors are for the Serial A T A signal cables for Serial A T A hard disk drives and optical disc drives. If you installed Serial A T A hard disk drives, you can create a RAID 0, 1, 5, and 10 conguration with the Intel ® Matrix Storage T echnology through the onboard Intel ® ...

  • Asus Rampage II Extreme - page 61

    5. USB connectors (10-1 pin USB78; USB910; USB1 1 12) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specication that supports up to 480 Mbps connection speed. Never connect a 139 ...

  • Asus Rampage II Extreme - page 62

    6. IEE E 1394 a port connector (10-1 pin IE1394_2) This connector is for an IEEE 1394a port. Connect the IEEE 1394a module cable to this connector , then install the module to a slot opening at the back of the system chassis. Never connect a USB cable to the IEEE 1394a connector . Doing so will damage the motherboard! Y ou can connect the 1394 cabl ...

  • Asus Rampage II Extreme - page 63

    7. CPU, chassis, power and optional fan connectors (4 -pi n C PU_ F AN, 3- pin CH A_ F AN 1- 3, 3-p in P WR_ F AN, 3- pin OP T_F AN1 –3) The fan c onnect ors su pport co oling fans o f 350 mA ~ 2000 mA (24 W max.) or a total of 1 A ~ 7 A (84 W max.) at +12V . Connect the fan cables to the fan connectors on the motherboard, making sure that the bl ...

  • Asus Rampage II Extreme - page 64

    8. Thermal sensor cable connectors (2-pin OPT_TEMP1/2/3) These connectors are for temperature monitoring. Connect the thermal sensor cables to these connectors and place the other ends to the devices which you want to monitor temperature. The optional fan1/2/3 can work with the temperature sensors for a better cooling effect. Enable OPT F AN1/2/3 o ...

  • Asus Rampage II Extreme - page 65

    10. Audio con nec tor s Optical drive audio connector: This connector allows you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner , or MPEG card. Front panel audio co nne cto r: This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one en ...

  • Asus Rampage II Extreme - page 66

    1 1. A TX power connectors (24-pin EA TXPWR, 8-pin EA TX12V) These connectors are for A TX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t. • Make sure to remove the cap on the EA TX12V connector before ...

  • Asus Rampage II Extreme - page 67

    12. ROG connector (3-pin ROG) This connector is for the box labeled as Republic of Gamers on the heatpipe assembly . Connect the cable of the box to this connector , and the box lights up when the system is on. ROG Rampage II Extreme 2-39 ...

  • Asus Rampage II Extreme - page 68

    • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin IDE_LED) This 2-pin connector is for the HDD Activity LED. ...

  • Asus Rampage II Extreme - page 69

    ASUS Q-Connector (system panel) Y ou can use the ASUS Q-Connector to connect/disconnect chassis front panel cables in a few steps. Refer to the instructions below to install the ASUS Q-Connector . 2. Install the ASUS Q-Connector to the system panel connector , making sure the orientation matches the labels on the motherboard. 3. The front panel fun ...

  • Asus Rampage II Extreme - page 70

    2.7.3 Onboard switches Onboard switches allow you to ne-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. 1. Power-on switch Press the power-on switch to wake/power up the system. 2. Reset switch Press the reset switch to reboot th ...

  • Asus Rampage II Extreme - page 71

    2.7.4 T weakIt T weakIt, along with the LCD Poster , allows you full control over system voltages and frequency to fulll your overclocking desire during game play . Y ou can also monitor hardware information or congure BIOS boot selection and BIOS backup. T weakIt consists of the T OGGLE button, the CONFIRM button, and the SELECT joystick: ? ...

  • Asus Rampage II Extreme - page 72

    T weakIt options The following table shows T weakIt options. For detailed voltage and frequency settings, refer to 3.3 Extreme T weaker menu . For BIOS boot selection and backup settings, refer to 3.7.3 BIOS Boot Priority and 3.8.4 BIOS Flashback . Options Usages and Notes 1 HWINFO 1 VOL T 0 ALL 1 VTTCPU 2 VTTDDR 3 NB 4 CPUPLL 5 SB1_5V 6 SB1_1V 7 D ...

  • Asus Rampage II Extreme - page 73

    2.7.5 ProbeIt The ROG ProbeIt feature provides a nice touch for your convenient and accurate OC settings. No time wasted fumbling around on the complicated motherboard layout, the clearly marked area gives you easier access to the measure points when a multitester is employed for more accurate measurements during your busy overclocking work. Refer ...

  • Asus Rampage II Extreme - page 74

    2.8 Installing accessories 2.8.1 Installing the optional fan Install the optional fan only if you are using a passive cooler or a water cooler . Installing the optional fan with an active CPU cooler will interfere with the airow and destabilize the system. 1. Position the fan above the pipe and heatsink assembly . 2. Fit the fan to the grooved e ...

  • Asus Rampage II Extreme - page 75

    2.8.2 Installing the audio card 1. T ake out the audio card from the package. 2. Locate the audio slot on the motherboard. 3. Align the card connector with the slot and press rmly until the card sits on the slot completely . 4. The photo below shows the audio card installed on the motherboard. ROG Rampage II Extreme 2-47 ...

  • Asus Rampage II Extreme - page 76

    2.8.3 Installing EL I/O shield and LCD Poster 2. Ori ent th e mot her boa rd an d i nst all it to th e c ha ss is. Ma ke s ure th at th e m oth erb oa rd ex ter na l por ts t th e s hie ld op eni ngs . 1. Install the EL I/O shield to the chassis by snaping it in place from inside. 3. Locate the EL_CON connector and connect the shield cable to th ...

  • Asus Rampage II Extreme - page 77

    2.8.4 Installing the third party fusion block This ROG motherboard has an open standard tting specication, allowing third party vendor to design their branded “Fusion Block“. T o install the third party fusion block: 1. Remove the heatsink from the motherboard. 2. Refer to the fusion block documentation to install the fusion block. V endo ...

  • Asus Rampage II Extreme - page 78

    2.9 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector . 5. T urn on the devices in the follow ...

  • Asus Rampage II Extreme - page 79

    2.10 Turning off the computer 2.10.1 Using the OS shut down function If you are using Windows ® Vista™: 1. Click the Start button then select Shut Down . 2. The power supply should turn off after Windows ® shuts down. If you are using Windows ® XP: 1. Click the Start button then select T urn Off Computer . 2. Click the T urn Off button to shut ...

  • Asus Rampage II Extreme - page 80

    2-52 Chapter 2: Hardware information ...

  • Asus Rampage II Extreme - page 81

    3 BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. ...

  • Asus Rampage II Extreme - page 82

    Chapter summary 3 ROG Rampage II Extreme 3.1 Managing and updating your BIOS ............................................ 3-1 3.2 BIOS setup program .................................................................... 3-9 3.3 Extreme T weaker menu ............................................................. 3-12 3.4 Main menu ..................... ...

  • Asus Rampage II Extreme - page 83

    ROG Rampage II Extreme 3-1 3.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS Update (Updates the BIOS in Windows ® environment.) 2. ASUS EZ Flash 2 (Updates the BIOS using a oppy disk or USB ash disk.) 3. AFUDOS (Updates the BIOS using a ...

  • Asus Rampage II Extreme - page 84

    3-2 Chapter 3: BIOS setup Quit all Windows ® applications before you update the BIOS using this utility . 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select . Click Next . Updating the BIOS through the Internet T o update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows ® deskt ...

  • Asus Rampage II Extreme - page 85

    ROG Rampage II Extreme 3-3 Updating the BIOS through a BIOS le T o update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate . The ASUS Update main window appears. 2. Select Update BIOS from a le option from the drop-down menu, ...

  • Asus Rampage II Extreme - page 86

    3-4 Chapter 3: BIOS setup 3.1.2 Creating a bootable oppy disk 1. Do either one of the following to create a bootable oppy disk. DOS environment a. Insert a 1.44MB oppy disk into the drive. b. At the DOS prompt, type format A: / S then press <Enter>. Windows ® XP environment a. Insert a 1.44 MB oppy disk to the oppy disk drive. ...

  • Asus Rampage II Extreme - page 87

    ROG Rampage II Extreme 3-5 3.1.3 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a oppy disk and using a DOS-based utility . The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing <Alt> + <F2> during the Power-On ...

  • Asus Rampage II Extreme - page 88

    3-6 Chapter 3: BIOS setup 3.1.4 AFUDOS utility The AFUDOS utility allows you to update the BIOS le in DOS environment using a bootable oppy disk with the updated BIOS le. This utility also allows you to copy the current BIOS le that you can use as backup when the BIOS fails or gets corrupted during the updating process. Copying the curr ...

  • Asus Rampage II Extreme - page 89

    ROG Rampage II Extreme 3-7 2. Copy the AFUDOS utility (afudos.exe) from the motherboard support DVD to the bootable oppy disk you created earlier . 3. Boot the system in DOS mode, then at the prompt type: afudos /i[lename] wh ere [ len am e] is th e la tes t o r t he o rig ina l BI OS le on t he bo ota ble  opp y d isk . A:>afudo ...

  • Asus Rampage II Extreme - page 90

    3-8 Chapter 3: BIOS setup 3.1.5 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. Y ou can update a corrupted BIOS le using the motherboard support DVD, the oppy disk, or the USB ash disk that contains the u ...

  • Asus Rampage II Extreme - page 91

    ROG Rampage II Extreme 3-9 3.2 BIOS setup program This motherboard supports two programmable rmware chips that you can update using the provided utility described in section 3.1 Managing and updating your BIOS . Use the BIOS Setup program when you are installing a motherboard, reconguring your system, or prompted to “Run Setup.” This sect ...

  • Asus Rampage II Extreme - page 92

    3-10 Chapter 3: BIOS setup 3.2.2 Menu bar The menu bar on top of the screen has the following main items: Extreme T weaker For changing the overclocking settings Main For changing the basic system conguration Advanced For changing the advanced system settings Power For changing the advanced power management (APM) conguration Boot For changing ...

  • Asus Rampage II Extreme - page 93

    ROG Rampage II Extreme 3-1 1 3.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, and Exit) on the menu bar have their respective menu items. 3.2.5 Sub-menu items A solid triangle before each item on any menu ...

  • Asus Rampage II Extreme - page 94

    3-12 Chapter 3: BIOS setup 3.3 Extreme Tweaker menu The Extreme T weaker menu items allow you to congure overclocking-related items. T ake caution when changing the settings of the Extreme T weaker menu items. Incorrect eld values can cause the system to malfunction.s v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. BIOS SETUP UTILITY ...

  • Asus Rampage II Extreme - page 95

    ROG Rampage II Extreme 3-13 The following two items appear when you set Ai Overclock T uner to [Manual]. OC From CPU Level Up [Auto] After you select a CPU level and set Ai Overclock T uner to [Manual], the related parameters will be adjusted accordingly . Conguration options: [Auto] [i7-crazy-3.60G] [i7-crazy-4.00G] Ai Overclock T uner [Auto] A ...

  • Asus Rampage II Extreme - page 96

    3-14 Chapter 3: BIOS setup OC From Memory Level Up [Auto] After you select a memory level and set Ai Overclock T uner to [Manual], the related parameters will be adjusted accordingly . Con gurat ion op tions: [Aut o] [DDR3- 1600MH z] [D DR3 -18 00MHz] The following item appears only when you set Ai Overclock T uner to [X.M.P]. eXtreme Memory Pro ...

  • Asus Rampage II Extreme - page 97

    ROG Rampage II Extreme 3-15 UCLK Frequency [Auto] Allows you to set the Uncore Clock Ratio (UCLK). Conguration options: [Auto] [DDR3-1600MHz] [DDR3-2033MHz] The UCLK Frequency conguration options vary with the DRAM Frequency item settings. QPI Frequency [Auto] Allows you to set the QuickPath Interconnect (QPI) frequency . Conguration optio ...

  • Asus Rampage II Extreme - page 98

    3-16 Chapter 3: BIOS setup DRAM WRITE Recovery Time [Auto] Conguration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock] DRAM READ to PRE Time [Auto] Conguration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock] DRAM FOUR ACT WIN Time [Auto] Conguration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock] DRAM WRITE to READ Delay [Auto] Co ...

  • Asus Rampage II Extreme - page 99

    ROG Rampage II Extreme 3-17 The following nine (9) items are adjusted by typing the desired values using the numeric keypad and press the <Enter> key . Y ou can also use the <+> and <-> keys to adjust the value. T o restore the default setting, type [auto] using the keyboard and press the <Enter> key . CPU V oltage [Auto] Al ...

  • Asus Rampage II Extreme - page 100

    3-18 Chapter 3: BIOS setup CPU PLL V oltage [Auto] Allows you to select the CPU PLL voltage. The text color in the conguration eld corresponds to the onboard CPU LED color , both of which indicate voltage condition. When you set the CPU LED Selection item to [CPU PLL], the onboard CPU LED displays CPU PLL voltage condition. Refer to page 2-2 ...

  • Asus Rampage II Extreme - page 101

    ROG Rampage II Extreme 3-19 Blue Y ellow Red CPU V oltage 0.85000–1.5000 1.50625–1.59375 1.60000– CPU PLL V oltage 1.81592–1.89542 1.90867–1.94842 1.96167– QPI/DRAM Core V oltage 1.20000–1.39375 1.40000–1.65625 1.66250– IOH V oltage 1.1 1341–1.39166 1.40491–1.64341 1.65666– IOH PCIE V oltage 1.51 106–1.69656 1.70981–1.84 ...

  • Asus Rampage II Extreme - page 102

    3-20 Chapter 3: BIOS setup 3.4 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 3.4.1 System Time [xx:xx:xx] Allows you to set the system time. 3.4.2 System Date [Day xx/xx/xxxx] Allows you to set the system date. 3.4.3 Legacy Diskette A [1.44M, 3.5 in.] Sets the ...

  • Asus Rampage II Extreme - page 103

    ROG Rampage II Extreme 3-21 3.4.5 S A T A 1 – 6 While entering Setup, the BIOS automatically detects the presence of Serial A T A devices. There is a separate sub-menu for each SA T A device. Select a device item then press <Enter> to display the SA T A device information. The BIOS automatically detects the values opposite the dimmed items ...

  • Asus Rampage II Extreme - page 104

    3-22 Chapter 3: BIOS setup DMA Mode [Auto] Selects the DMA mode. Conguration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting T echnology . Conguration options: [Auto] [Disabled] [Enabled] 32Bit Data ...

  • Asus Rampage II Extreme - page 105

    ROG Rampage II Extreme 3-23 Hard Disk Write Protect [Disabled] Disables or enables device write protection. This will be ef fective only if device is accessed through BIOS. Conuration option: [Disabled] [Enabled] SA T A Detect Time Out (Sec) [35] Selects the time out value for detecting A T A/A T API devices. Conguration options: [0] [5] [10] ...

  • Asus Rampage II Extreme - page 106

    3-24 Chapter 3: BIOS setup 3.4.8 System Information This menu gives you an overview of the general system specications. The BIOS automatically detects the items in this menu. BIOS Information Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specication. System Memory Displays the auto-detected system memor ...

  • Asus Rampage II Extreme - page 107

    ROG Rampage II Extreme 3-25 3.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. BIOS SETUP UTILITY Extreme Tweaker Main Advanced Power Boot Tools Exit CPU Conguration Chipset Onboard Devices Conguration USB Conguration PCIP ...

  • Asus Rampage II Extreme - page 108

    3-26 Chapter 3: BIOS setup CPU Ratio Setting [Auto] Allows you to adjust the ratio between CPU Core Clock and BCLK Frequency . Use the <+> and <-> keys to adjust the value. The valid value ranges dif ferently according to your CPU model. C1E Support [Enabled] Allows you to enable or disable Enhanced Halt State support. Conguration op ...

  • Asus Rampage II Extreme - page 109

    ROG Rampage II Extreme 3-27 Intel(R) C-ST A TE T ech [Disabled] Allows you enable or disable the Intel ® C-ST A TE T echnology . When enabled, the CPU idle is set to C2/C3/C4. Conguration options: [Disabled] [Enabled] C State package limit setting [Auto] This item appears only when you set the Intel(R) C-ST A TE T ech item to [Enabled]. The sel ...

  • Asus Rampage II Extreme - page 110

    3-28 Chapter 3: BIOS setup Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. Onboard Device Conguration Onboard Device [Standard] High Denition Audio [Enabled] Front Panel Type [HD Audio] J-Micron eSATA/PATA Controller [Enabled] Controller Mode [IDE] ...

  • Asus Rampage II Extreme - page 111

    ROG Rampage II Extreme 3-29 LAN Boot ROM [Disabled] This item appears only when you enable the previous item. Conguration options: [Disabled] [Enabled] Onboard 1394 Controller [Enabled] Allows you to enabled or disable the onboard IEEE 1394a controller . Conguration options: [Enabled] [Disabled] 3.5.4 USB Conguration The items in this menu ...

  • Asus Rampage II Extreme - page 112

    3-30 Chapter 3: BIOS setup 3.5.5 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. T ake caution when changing the settings of the PCI PnP menu items. Incorrect eld values can cause the system to malfunction. Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to ...

  • Asus Rampage II Extreme - page 113

    ROG Rampage II Extreme 3-31 3.5.6 LCD Poster and LED Control LCD Poster Backlight [Turn Off] LCD Poster Backlight(S5) [Turn Off] LCD Poster Mode [HWM Information] HWM Select Mode [All Temperature] All LED Control [Enabled] ROG Logo [Enabled] EL Light [Enabled] Voltiminder LED [Enabled] CPU LED Selection [CPU] NB LED Selection [IOH] SB LED Selection ...

  • Asus Rampage II Extreme - page 114

    3-32 Chapter 3: BIOS setup EL Light [Enabled] If this item is set to [Enabled], the EL I/O shield connected to the EL_CON connector on the motherboard lights up when the system is on. Conguration options: [Enabled] [Disabled] V oltiminder LED [Enabled] Allows you to enable or disable the onboard V oltiminder LED. Conguration options: [Enabled ...

  • Asus Rampage II Extreme - page 115

    ROG Rampage II Extreme 3-33 3.5.7 iROG Conguration iROG CrashBIOS Rule [Switch] When this item is set to [Switch], the system will automatically switch between BIOS1 and BIOS2 so that you are allowed to use the BIOS Flashback function. When this item is set to [Keep], the system will not switch between BIOS1 and BIOS2, and therefore BIOS Flashba ...

  • Asus Rampage II Extreme - page 116

    3-34 Chapter 3: BIOS setup 3.6 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options. 3.6.1 Suspend Mode [Auto] Allows you to select the Advanced Conguration and Power Interface (ACPI) state to be used for system susp ...

  • Asus Rampage II Extreme - page 117

    ROG Rampage II Extreme 3-35 3.6.5 APM Conguration Restore On AC Power Loss [Power Off] When set to Power Off, the system goes into of f state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state, whatever the system state was before the AC pow ...

  • Asus Rampage II Extreme - page 118

    3-36 Chapter 3: BIOS setup Hardware Monitor Voltage Monitor Temperature Monitor Fan Speed Monitor Fan Speed Control Voltage Monitor BIOS SETUP UTILITY Power 3.6.6 Hardware Monitor V oltage Monitor CPU V oltage; CPU PLL V oltage; QPI/DRAM Core V oltage; IOH V oltage; IOH PCIE V oltage; ICH V oltage; ICH PCIE V oltage; DRAM Bus V oltage; 3.3V V oltag ...

  • Asus Rampage II Extreme - page 119

    ROG Rampage II Extreme 3-37 Select Screen Select Item +- Change Field F1 General Help F10 Save and Exit ESC Exit Fan Speed Control CPU Q-Fan Control [Disabled] Chassis Q-Fan Control [Disabled] PWRFan Control [Disabled] OPTFan1 Control [Disabled] OPTFan2 Control [Disabled] OPTFan3 Control [Disabled] CPU Q-Fan Control BIOS SETUP UTILITY Power v02.61 ...

  • Asus Rampage II Extreme - page 120

    3-38 Chapter 3: BIOS setup PWRFan Duty [50%] Allows you to set the fan duty cycle. This item appears when the POWER F AN Control item is set to [Duty Mode]. Conguration options: [40%] [50%] [60%] [70%] [80%] [90%] OPTFan1/2/3 Control [Disabled] All ows yo u to s elect the o pti onal f an con trol mod e. When t his it em is se t t o [Du ty Mod e] ...

  • Asus Rampage II Extreme - page 121

    ROG Rampage II Extreme 3-39 3.7 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. Boot Settings Boot Device Pri ...

  • Asus Rampage II Extreme - page 122

    3-40 Chapter 3: BIOS setup 3.7.2 Boot Settings Conguration Quick Boot [Enabled] Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Conguration options: [Disabled] [Enabled] Full Screen Logo [Enabled] ...

  • Asus Rampage II Extreme - page 123

    ROG Rampage II Extreme 3-41 3.7.3 BIOS Boot Priority • This item appears only when you move the BIOS_FLASHBACK jumper cap to pins 1-2: BIOS MENU . • Refer to 2. BIOS ash setting (6-pin BIOS_FLASHBACK) in 2.6 Jumpers for further information. Now BIOS status Shows “BIOS1” or “BIOS2” depending on from which BIOS the system boots. BIOS B ...

  • Asus Rampage II Extreme - page 124

    3-42 Chapter 3: BIOS setup Change Supervisor Password Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed. T o set a Supervisor Password: 1. Select the Change Supervisor Password item and press <Enter>. ...

  • Asus Rampage II Extreme - page 125

    ROG Rampage II Extreme 3-43 User Access Level [Full Access] This item allows you to select the access restriction to the Setup items. Conguration options: [No Access] [View Only] [Limited] [Full Access] [No Access] prevents user access to the Setup utility . [View Only] allows access but does not allow change to any eld. [Limited] allows chan ...

  • Asus Rampage II Extreme - page 126

    3-44 Chapter 3: BIOS setup 3.8 Tools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item +- Change Field Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. A ...

  • Asus Rampage II Extreme - page 127

    ROG Rampage II Extreme 3-45 Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. O.C. PROFILE Conguration O.C. Prole 1 Status :Not Installed O.C. Prole 2 Status :Not Installed O.C. Prole 3 Status :Not Installed O.C. Prole 4 Status :Not Ins ...

  • Asus Rampage II Extreme - page 128

    3-46 Chapter 3: BIOS setup 3.8.3 AI NET 2 Check Marvell LAN Cable [Disabled] Enables or disables checking of the LAN cable during the Power-On Self-T est (POST). Conguration options: [Disabled] [Enabled] v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. Ai Net 2 Pair Status Length Check Marvell LAN cable [Disabled] Check Marvell LAN cable ...

  • Asus Rampage II Extreme - page 129

    ROG Rampage II Extreme 3-47 Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. Now BIOS status : BIOS1 BIOS Boot Selection : Hardware BIOS Name BIOS1: Normal BIOS2: Performance BIOS Update BIOS1 to BIOS2 BIOS2 to BIOS1 BIOS Name BIOS Description Select ...

  • Asus Rampage II Extreme - page 130

    3-48 Chapter 3: BIOS setup 3.9 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Pressing <Esc> does not immediately exit this menu. Select one of the options from this menu or <F10> from the legend bar to exit. Select Screen Sel ...

  • Asus Rampage II Extreme - page 131

    4 Software support This chapter describes the contents of the support DVD that comes with the motherboard package and the software. ...

  • Asus Rampage II Extreme - page 132

    ROG Rampage II Extreme Chapter summary 4 4.1 Installing an operating system ................................................... 4-1 4.2 Support DVD information ............................................................ 4-1 4.3 Software information ................................................................... 4-9 4.4 RAID congurations ... ...

  • Asus Rampage II Extreme - page 133

    ROG Rampage II Extreme 4-1 If Autorun is NOT enabled in your computer , browse the contents of the support DVD to locate the le ASSETUP .EXE from the BIN folder . Double-click the ASSETUP .EXE to run the DVD. 4.1 Installing an operating system This motherboard supports Windows ® XP/64-bit XP/Vista operating systems (OS). Always install the late ...

  • Asus Rampage II Extreme - page 134

    4-2 Chapter 4: Software support 4.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Installation Wizard for Drivers Launches the ASUS InstAll driver installation wizard. Intel Chipset Inf Update Program Installs the Inte ...

  • Asus Rampage II Extreme - page 135

    ROG Rampage II Extreme 4-3 4.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. Click to display the next screen Click to display the previous screen ASUS InstAll - Installation Wizard for Utilities Installs all of the utilities through the Installation Wizard. ASUS Update The ASUS Update ...

  • Asus Rampage II Extreme - page 136

    4-4 Chapter 4: Software support ASUS PC Probe II This smart utility monitors the fan speed, CPU temperature, and system voltages, and alerts you of any detected problems. This utility helps you keep your computer in healthy operating condition. ASUS AI Suite Installs the ASUS AI Suite. ASUS AI Direct Link The ASUS AI Direct Link provides up to 70% ...

  • Asus Rampage II Extreme - page 137

    ROG Rampage II Extreme 4-5 Ulead Burn.Now Installs the Ulead Burn.Now application for Audio DVD, CD and data disc creation. Ulead PhotoImpact 12 SE Installs the Ulead PhotoImpact 12 SE software. Winzip 1 1 Installs the Winzip utility for easy le-compression and protection. CyberLink PowerBackup Installs the CyberLink Powerbackup software. ASUS E ...

  • Asus Rampage II Extreme - page 138

    4-6 Chapter 4: Software support 4.2.5 Manual menu The Manuals menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most user manual les are in Portable Document Format (PDF). Install the Adobe ® Acrobat ® Reader from the Utilities menu before opening a user manual le. 4.2.6 Video menu Clic ...

  • Asus Rampage II Extreme - page 139

    ROG Rampage II Extreme 4-7 4.2.8 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support DVD. Click an icon to display the specied information. Motherboard Info Displays the general specications of the motherboard. 4.2.7 ASUS Contact information Click the ...

  • Asus Rampage II Extreme - page 140

    4-8 Chapter 4: Software support Filelist Di spl ays th e co nte nts o f the su ppo rt D VD and a b rie f d esc ri pt ion of ea ch in te xt for mat . T echnical support form Displays the ASUS T echnical Support Request Form that you have to ll out when requesting technical support. Browse this DVD Displays the support DVD contents in graphical fo ...

  • Asus Rampage II Extreme - page 141

    ROG Rampage II Extreme 4-9 4.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information. 4.3.1 ASUS MyLogo3™ The ASUS MyLogo3™ utility lets you customize the boot logo. ...

  • Asus Rampage II Extreme - page 142

    4-10 Chapter 4: Software support 9. When the screen returns to the ASUS Update utility , ash the original BIOS to load the new boot logo. 10. After ashing the BIOS, restart the computer to display the new boot logo during POST . 8. Adjust the boot image to your desired size by selecting a value on the Ratio box. 7. When the logo images appear ...

  • Asus Rampage II Extreme - page 143

    ROG Rampage II Extreme 4-1 1 3. Click the Run button to perform a cable test. 4.3.2 AI NET 2 The AI NET 2 features the Marvell ® Virtual Cable T ester™ (VCT). VCT is a cable diagnostic utility that reports LAN cable faults and shorts using the T ime Domain Reectometry (TDR) technology . The VCT detects and reports open and shorted cables, imp ...

  • Asus Rampage II Extreme - page 144

    4-12 Chapter 4: Software support 4.3.3 Sound Blaster X-Fi audio utility With the SupremeFX X-Fi audio card installed to the motherboard, you will be able to enjoy excellent audio quality and experience realistic sound effects through the ADI AD2000B audio codec and Sound Blaster X-Fi interface. Activating X-Fi’s CMSS3D, Crystalizer , and EAX will ...

  • Asus Rampage II Extreme - page 145

    ROG Rampage II Extreme 4-13 Main Panel The Main Panel displays all the features and functions your SupremeFX X-Fi audio card supports. Click each icon to congure the following settings (from left to right): Speakers and Headphone, EAX Effects, X-Fi CMSS-3D, X-Fi Crystalizer , Smart V olume Management, Graphic Equalizer , and Mixer . Minimize Exi ...

  • Asus Rampage II Extreme - page 146

    4-14 Chapter 4: Software support EAX Effects Panel This panel contains environment effects that you can select to obtain a sense of realism during interactive 3D games. Click to enable EAX Effects X-Fi CMSS-3D Panel This panel allows you to congure 3D virtual surround effects. Click to select an environment Drag to adjust effects amount Click to ...

  • Asus Rampage II Extreme - page 147

    ROG Rampage II Extreme 4-15 Smart V olume Management Panel Enable Smart V olume Management (SVM) to avoid large volume uctuations. Click to switch on/off SVM Graphic Equalizer Panel This panel allows you to customize equalizer settings or select an EQ presets. Click to select an EQ preset Click to save settings Click to enable EQ Drag to customi ...

  • Asus Rampage II Extreme - page 148

    4-16 Chapter 4: Software support 4.3.4 ASUS PC Probe II PC Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. PC Probe II senses fan rotations, CPU temperature, and system voltages, among others. Because PC Probe II is software-based, you can start monitoring your ...

  • Asus Rampage II Extreme - page 149

    ROG Rampage II Extreme 4-17 Button Function Opens the Conguration window Opens the Report window Opens the Desktop Management Interface window Opens the Peripheral Component Interconnect window Opens the Windows Management Instrumentation window Opens the hard disk drive, memory , CPU usage window Shows/Hides the Preference section Minimizes the ...

  • Asus Rampage II Extreme - page 150

    4-18 Chapter 4: Software support Changing the monitor panels position T o change the position of the monitor panels in the desktop, click the arrow down button of the Scheme options, then select another position from the list box. Click OK when nished. Moving the monitor panels All monitor panels move together using a magnetic effect. If you wan ...

  • Asus Rampage II Extreme - page 151

    ROG Rampage II Extreme 4-19 Monitoring sensor alert The monitor panel turns red when a component value exceeds or is lower than the threshold value. Refer to the illustrations below . Large display Small display WMI browser Click to display the WMI (Windows Management Instrumentation) browser . This browser displays various Windows® management inf ...

  • Asus Rampage II Extreme - page 152

    4-20 Chapter 4: Software support PCI browser Click to display the PCI (Peripheral Component Interconnect) browser . This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information. Usage The Usage browser displays real-time information on the CPU ...

  • Asus Rampage II Extreme - page 153

    ROG Rampage II Extreme 4-21 Memory usage The Memory tab shows both used and available physical memory . The pie chart at the bottom of the window represents the used (blue) and the available physical memory . Conguring PC Probe II Click to view and adjust the sensor threshold values. The Cong window has two tabs: Sensor/Threshold and Preferen ...

  • Asus Rampage II Extreme - page 154

    4-22 Chapter 4: Software support 4.3.5 ASUS AI Suite ASUS AI Suite allows you to launch EPU-6 Engine, T urboV , Fan Xpert, CPU Level Up, and AI Nap utilities easily . Installing AI Suite T o install AI Suite on your computer: 1. Place the support DVD to the optical drive. The Drivers installation tab appears if your computer has an enabled Autorun ...

  • Asus Rampage II Extreme - page 155

    ROG Rampage II Extreme 4-23 Other feature buttons Click on right corner of the main window to open the monitor window . Click on right corner of the expanded window to switch the temperature from degrees Centigrade to degrees Fahrenheit. Displays the CPU/ system temperature, CPU/memory/PCIE voltage, and CPU/ chassis fan speed Displays the FSB/CPU f ...

  • Asus Rampage II Extreme - page 156

    4-24 Chapter 4: Software support 4.3.6 ASUS AI Nap This feature allows you to minimize the power consumption of your computer whenever you are away . Enable this feature for minimum power consumption and a more quiet system operation. After installing AI Suite from the bundled support DVD, you can launch the utility by double-clicking the AI Suite ...

  • Asus Rampage II Extreme - page 157

    ROG Rampage II Extreme 4-25 4.3.7 ASUS Fan Xpert Asu s Fan Xpert inte llige ntly allow s you to ad just both the C PU and chas sis f an spe eds a ccordi ng to differ ent a mbien t tem peratu res c aused by d ifferen t cli mate con ditio ns in differe nt ge ograp hic r egion s and your PC’s syste m loa ding. T he bui lt-in varie ty of usef ul pr o ...

  • Asus Rampage II Extreme - page 158

    4-26 Chapter 4: Software support Click to get the calibration between the fan rotation and fan speed ratio Click to close the Calibration window Fan prole modes • Disable: Select this mode to disable the Fan Xpert function. • Standard: This mode makes the fan adjust speed in moderate pattern. • Silent: This mode minimizes fan speed for qui ...

  • Asus Rampage II Extreme - page 159

    ROG Rampage II Extreme 4-27 4.3.8 CPU Level Up The CPU Level Up allows you to overclock immediately with OC prole presets in WIndows ® environment without the hassle of entering BIOS. After installing AI Suite from the bundled Support DVD, launch the utility by double- clicking the AI Suite icon on the Windows ® OS taskbar and click the CPU Le ...

  • Asus Rampage II Extreme - page 160

    4-28 Chapter 4: Software support 4.3.9 ASUS EPU-6 Engine ASUS EPU-6 Engine is an energy-efcient tool that satises different computing needs. This utility provides four modes that you can select to enhance system performance or save power . Selecting Auto mode will have the system shift modes automatically according to current system status. Y ...

  • Asus Rampage II Extreme - page 161

    ROG Rampage II Extreme 4-29 6 Engine main menu Auto Mode Runs calibration T urbo Mode High Performance Mode Medium Power Saving Mode Max. Power Saving Mode Advanced settings for each mode (refer to the next page for further information) Displays CPU Power and T otal CPU Energy Saving *Shifts between the display of T otal and Current CO2 reduced Dis ...

  • Asus Rampage II Extreme - page 162

    4-30 Chapter 4: Software support Advanced settings menu Click Setting ( ) from the 6 Engine main menu to display conguration options in each mode. Some options in certain modes are dimmed, meaning that they are not available. Click to select a mode Move the slider to adjust Click the arrow to see more options Restore default settings Click to ap ...

  • Asus Rampage II Extreme - page 163

    ROG Rampage II Extreme 4-31 Conguration options T urbo Mode High Performance Mode Medium Power Saving Mode Maximum Power Saving Mode CPU Frequency Overclocking +1% to +30% N/A Downclocking -1% to -50% Downclocking -1% to -50% vCore V oltage Downgrade N/A N/A Small/Medium/ High Small/Medium/ High Chipset V oltage Downgrade N/A N/A On/Of f On/Off ...

  • Asus Rampage II Extreme - page 164

    4-32 Chapter 4: Software support 4.3.10 ASUS T urboV ASUS T urboV allows you to overclock the CPU frequency , CPU voltage, QPI/ Memory controller voltage, and DRAM voltage in WIndows ® environment and takes effect in real-time without exiting and rebooting the OS. Refer to the CPU documentation before adjusting CPU voltage settings. Setting a high ...

  • Asus Rampage II Extreme - page 165

    ROG Rampage II Extreme 4-33 Advanced settings menu Click More Setting from the T urboV main screen to display detailed conguration options for CPU/chip voltage, DRAM Reference voltage, and CPU ratio. • Only Intel ® Core™ i7 Extreme Edition processors support the CPU Ratio function. • Set the CPU Ratio Setting BIOS item to [Auto] before us ...

  • Asus Rampage II Extreme - page 166

    4-34 Chapter 4: Software support 4.4 RAID congurations The motherboard comes with the Intel ® ICH10R Southbridge controller that supports RAID 0, RAID 1, RAID 10, and RAID 5 for six independent Serial A T A channels. 4.4.1 RAID denitions RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in parallel, inter ...

  • Asus Rampage II Extreme - page 167

    ROG Rampage II Extreme 4-35 4.4.3 Intel ® RAID congurations This motherboard supports RAID 0, RAID 1, RAID 5, RAID 10 and Intel ® Matrix Storage congurations for Serial A T A hard disks drives through the Intel ® ICH10R Southbridge chip. Setting the RAID item in BIOS Y ou must set the RAID item in the BIOS Setup before you can create a RAI ...

  • Asus Rampage II Extreme - page 168

    4-36 Chapter 4: Software support Intel ® Matrix Storage Manager option ROM utility The Intel ® Matrix Storage Manager Option ROM utility allows you to create RAID 0, RAID 1, RAID 10 (RAID 0+1), and RAID 5 set(s) from Serial A T A hard disk drives that are connected to the Serial A T A connectors supported by the Southbridge. T o enter the Intel ? ...

  • Asus Rampage II Extreme - page 169

    ROG Rampage II Extreme 4-37 Creating a RAID 0 set (striped) T o create a RAID 0 set: 1. From the utility main menu, select 1. Create RAID V olume and press <Enter>. The following screen appears. 2. Enter a name for the RAID 0 set and press <Enter>. 3. When the RAID Level item is highlighted, press the up/down arrow key to select RAID 0( ...

  • Asus Rampage II Extreme - page 170

    4-38 Chapter 4: Software support 6. Use the up/down arrow key to select the stripe size for the RAID 0 array , and then press <Enter>. The available stripe size values range from 4 KB to 128 KB. The default stripe size is 128 KB. We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used ...

  • Asus Rampage II Extreme - page 171

    ROG Rampage II Extreme 4-39 Creating a RAID 1 set (mirrored) T o create a RAID 1 set: 1. From the utility main menu, select 1. Create RAID V olume and press <Enter>. The following screen appears. 2. Enter a name for the RAID 1 set and press <Enter>. 3. When the RAID Level item is highlighted, press the up/down arrow key to select RAID 1 ...

  • Asus Rampage II Extreme - page 172

    4-40 Chapter 4: Software support Creating a RAID 10 set (RAID 0+1) T o create a RAID 10 set: 1. From the utility main menu, select 1. Create RAID V olume and press <Enter>. The following screen appears. 2. Enter a name for the RAID 10 set and press <Enter>. 3. When the RAID Level item is highlighted, press the up/down arrow key to selec ...

  • Asus Rampage II Extreme - page 173

    ROG Rampage II Extreme 4-41 Creating a RAID 5 set (parity) T o create a RAID 5 set: 1. From the utility main menu, select 1. Create RAID V olume and press <Enter>. The following screen appears. WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N): 7. Press <Y> to create the RAID volume and ...

  • Asus Rampage II Extreme - page 174

    4-42 Chapter 4: Software support 4. The Disks item is highlighted, press <Enter> to select the hard disk drives to congure as RAID. The following screen appears. 5. Use the up/down arrow key to highlight the drive you want to set, and then press <Space> to select. A small triangle marks the selected drive. Press <Enter> after c ...

  • Asus Rampage II Extreme - page 175

    ROG Rampage II Extreme 4-43 4.5.2 Creating a RAID driver disk in Windows ® T o create a RAID driver disk in Windows ® : 1. Start Windows ® . 2. Place the motherboard support DVD into the optical drive. 3. Go to the Make disk menu, and then click Intel ICH10R 32/64 bit RAID Driver Disk to create an Intel ® ICH10R RAID driver disk. 4. Insert a ? ...

  • Asus Rampage II Extreme - page 176

    4-44 Chapter 4: Software support T o install the RAID driver in Windows XP: 1. During the OS installation, the system prompts you to press the <F6> key to install third-party SCSI or RAID driver . 2. Press <F6> then insert the oppy disk with RAID driver into the oppy disk drive. 3. When prompted to select the SCSI adapter to insta ...

  • Asus Rampage II Extreme - page 177

    5 Multiple GPU technology support This chapter describes how to install and congure multiple A TI ® CrossFireX™ and NVIDIA ® SLI™ graphics cards. ...

  • Asus Rampage II Extreme - page 178

    ROG Rampage II Extreme Chapter summary 5 5.1 A TI ® CrossFireX™ technology .................................................... 5-1 5.2 NVIDIA ® SLI™ technology ........................................................... 5-6 ...

  • Asus Rampage II Extreme - page 179

    ROG Rampage II Extreme 5-1 5.1 ATI ® CrossFireX™ technology The motherboard supports the A TI ® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 5.1.1 Requirements • In Dual CrossFireX mode, you should have two identical CrossFireX-rea ...

  • Asus Rampage II Extreme - page 180

    5-2 Chapter 5: Multiple GPU technology support 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately . 6. Connect a VGA or a DVI cable to the graphics card. 4. Align and rmly insert the CrossFireX bridge connector to the goldngers on each graphics card. Ensure that the connector is rm ...

  • Asus Rampage II Extreme - page 181

    ROG Rampage II Extreme 5-3 5.1.4 Installing three CrossFireX graphics cards 1. Prepare three CrossFireX-ready graphics cards. 2. Insert the three graphics card into the PCIEX16 slots. If your motherboard has more than three PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics ca ...

  • Asus Rampage II Extreme - page 182

    5-4 Chapter 5: Multiple GPU technology support 5.1.5 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. • Ensure that your PCI Express graphics card driver supports the A TI ® CrossFireX™ technology . Download the latest driver from the AMD website (www .amd.com). ? ...

  • Asus Rampage II Extreme - page 183

    ROG Rampage II Extreme 5-5 Enabling Dual CrossFireX settings 1. In the Catalyst Control Center window , click Graphics Settings > CrossFireX > Congure . 2. From the Graphics Adapter list, select the graphics card to act as the display GPU. 3. Select Enable CrossFireX . 4. Click Apply , and then click OK to exit the window . Enabling T ripl ...

  • Asus Rampage II Extreme - page 184

    5-6 Chapter 5: Multiple GPU technology support 5.2 NVIDIA ® SLI™ technology The motherboard supports the NVIDIA ® SLI™ (Scalable Link Interface) technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 5.2.1 Requirements • In Dual SLI mode, you should hav ...

  • Asus Rampage II Extreme - page 185

    ROG Rampage II Extreme 5-7 5.2.2 Installing two SLI-ready graphics cards The following pictures are for reference only . The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. 1. Prepare two SLI-ready graphics cards. 2. Insert the two graphics card into the PCIEX16 slots. If your motherboard ...

  • Asus Rampage II Extreme - page 186

    5-8 Chapter 5: Multiple GPU technology support 5.2.3 Installing three SLI-ready graphics cards 1. Prepare three SLI-ready graphics cards. 2. Insert the three graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-g ...

  • Asus Rampage II Extreme - page 187

    ROG Rampage II Extreme 5-9 5.2.4 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. 5.2.5 Enabling the NVIDIA ® SLI™ technology After installing your graphics cards and the device drivers, enable the SLI feature in NVIDIA ® Control Panel under the Windows ® Vista™ ...

  • Asus Rampage II Extreme - page 188

    5-10 Chapter 5: Multiple GPU technology support B2. From the Personalization window , select Display Settings . B3. From the Display Settings dialog box, click Advanced Settings . B4. Select the NVIDIA GeForce tab, and then click Start the NVIDIA Control Panel . ...

  • Asus Rampage II Extreme - page 189

    ROG Rampage II Extreme 5-1 1 B5. The NVIDIA Control Panel window appears. Enabling Dual SLI settings From the NVIDIA Control Panel window , select Set SLI Conguration . Click Enable SLI and set the display for viewing SLI rendered content. When done, click Apply . Enabling T riple SLI settings 1. From the NVIDIA Control Panel window , select Set ...

  • Asus Rampage II Extreme - page 190

    5-12 Chapter 5: Multiple GPU technology support ...

  • Asus Rampage II Extreme - page 191

    A Appendix: Debug code table The Appendix lists the debug code table for the LCD Poster . ...

  • Asus Rampage II Extreme - page 192

    ROG Rampage II Extreme Chapter summary A Debug code table ...................................................................................... A-1 ...

  • Asus Rampage II Extreme - page 193

    ROG Rampage II Extreme A-1 Code Description CPU INIT CPU Initiation DET CPU T est CMOS R/W functionality . CHIPINIT Early chipset initialization: -Disable shadow RAM -Disable L2 cache -Program basic chipset registers DET DRAM Detect memory -Auto-detection of DRAM size, type and ECC. -Auto-detection of L2 cache DC FCODE Expand compressed BIOS code t ...

  • Asus Rampage II Extreme - page 194

    A-2 Appendix: Debug code table Code Description 8254TEST T est 8254 8259MSK1 T est 8259 interrupt mask bits for channel 1. 8259MSK2 T est 8259 interrupt mask bits for channel 2. 8259TEST T est 8259 functionality . COUNTMEM Calculate total memory by testing the last double word of each 64K page. MP INIT 1. Program MTRR of M1 CPU 2. Initialize L2 cac ...

  • Asus Rampage II Extreme - page 195

    ROG Rampage II Extreme A-3 Code Description P ASSWORD Clear EP A or customization logo. 1. Call chipset power management hook. 2. Recover the text fond used by EP A logo (not for full screen logo) 3. If password is set, ask for password. USB FINAL Initialize PnP boot devices 1. USB nal Initialization 2. NET PC: Build SYSID structure 3. Switch sc ...

  • Asus Rampage II Extreme - page 196

    A-4 Appendix: Debug code table ...

Produzent Asus Kategorie Motherboard

Dokumente, die wir vom Produzenten des Geräts Asus Rampage II Extreme erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Asus
- Bedienungsanleitungen Rampage II Extreme
- Produktkarten Asus
- Informationsbroschüren
- oder Energieetiketten Asus Rampage II Extreme
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Asus Rampage II Extreme.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Asus Rampage II Extreme, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Asus Rampage II Extreme. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Asus Rampage II Extreme ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Asus Rampage II Extreme, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Asus Rampage II Extreme hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Asus Rampage II Extreme verständlich ist.

Eine gänzliche Bedienungsanleitung von Asus sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Asus Rampage II Extreme bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Asus Rampage II Extreme befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Asus Rampage II Extreme, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Asus Rampage II Extreme - die uns die ersten Schritte während der Nutzung von Asus Rampage II Extreme erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Asus Rampage II Extreme hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Asus Rampage II Extreme im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Asus Rampage II Extreme?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Asus Rampage II Extreme nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Asus Rampage II Extreme hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)