-
Karcher 35HD - page 1
LIGHTNING 35HD Super High Brightness Digit al Video Projector User Manual 104-272A ...
-
Karcher 35HD - page 2
Declaration of Conformity Directives covered by this Declaration 89/336/EEC Electromagnetic Compatibility Directive, amended by 92/31/EEC and 93/68/EEC . 73/23/EEC Low V oltage Equipment Directive, amended by 93/68/EEC . Products covered by this Declaration Large screen video projector type LIGHTING 35HD Basis on which Conformity is being declared ...
-
Karcher 35HD - page 3
page i Digital Projection LIGHTNING 35HD User Manual Import ant Information Please read this user manual carefully before using the projector , and keep the manual handy for future reference. A serial number is located on the side of the projector . Record it here: Symbols used in this guide W arnings ELECTRICAL W ARNING: this symbol indicates that ...
-
Karcher 35HD - page 4
page ii Important Information Digital Projection LIGHTNING 35HD User Manual General precautions Do not open the cabinet. There are no user serviceable part s inside. Use only the power cable provided. Ensure that the power outlet includes a Ground connection, as this equipment MUST be earthed. T ake care to prevent small objects such as p aper or w ...
-
Karcher 35HD - page 5
page iii Digital Projection LIGHTNING 35HD User Manual Import ant Information Inst allation precautions Connect the LAN cable only to a computer LAN connection. Other similar connectors may have a dangerously high voltage source. The projector must be installed only by suit ably qualified personnel, in accordance with local building codes. The proj ...
-
Karcher 35HD - page 6
page iv Important Information Digital Projection LIGHTNING 35HD User Manual Operation and configuration precautions Do not try to operate the touch screen using anything harder than your finger . This could damage the LCD. Do not make changes to the networking configuration unless you understand what you are doing, or have t aken advice from your N ...
-
Karcher 35HD - page 7
page v Digital Projection LIGHTNING 35HD User Manual Content s LIGHTNING 35HD User Manual CONTENTS Import ant Information i Symbols used in this guide ............................................................................................... i W arnings ........................................................................................... ...
-
Karcher 35HD - page 8
page vi Contents Digital Projection LIGHTNING 35HD User Manual 3. Getting st arted 3.1 Switching the power on ................................................................................................. 3.2 Using the touch screen .................................................................................................. 3.2 Switching th ...
-
Karcher 35HD - page 9
page vii Digital Projection LIGHTNING 35HD User Manual Content s Configuration menu ...................................................................................................... 4.23 Det ailed st atus ................................................................................................................ ..................... 4.23 ...
-
Karcher 35HD - page 10
page viii Contents Digital Projection LIGHTNING 35HD User Manual ...
-
Karcher 35HD - page 11
1. Introduction Contents 1. Introduction 1.1 What’ s in the box? ............................................................................................................. ...... 1.2 Key features of the projector .................................................................................................. 1.3 Getting to know the projector ...
-
Karcher 35HD - page 12
-
Karcher 35HD - page 13
-
Karcher 35HD - page 14
-
Karcher 35HD - page 15
-
Karcher 35HD - page 16
-
Karcher 35HD - page 17
2. Inst allation Contents 2. Installation 2.1 Screen requirement s ............................................................................................................ ... 2.2 Aspect ratio ................................................................................................................... .................................. 2. ...
-
Karcher 35HD - page 18
-
Karcher 35HD - page 19
-
Karcher 35HD - page 20
-
Karcher 35HD - page 21
-
Karcher 35HD - page 22
-
Karcher 35HD - page 23
-
Karcher 35HD - page 24
-
Karcher 35HD - page 25
-
Karcher 35HD - page 26
-
Karcher 35HD - page 27
-
Karcher 35HD - page 28
-
Karcher 35HD - page 29
-
Karcher 35HD - page 30
-
Karcher 35HD - page 31
-
Karcher 35HD - page 32
-
Karcher 35HD - page 33
-
Karcher 35HD - page 34
-
Karcher 35HD - page 35
-
Karcher 35HD - page 36
-
Karcher 35HD - page 37
-
Karcher 35HD - page 38
-
Karcher 35HD - page 39
-
Karcher 35HD - page 40
-
Karcher 35HD - page 41
3. Getting st arted Contents 3. Getting st arted 3.1 Switching the power on ......................................................................................................... . 3.2 Using the touch screen ......................................................................................................... .. 3.2 Switching the lamp on .... ...
-
Karcher 35HD - page 42
-
Karcher 35HD - page 43
-
Karcher 35HD - page 44
-
Karcher 35HD - page 45
-
Karcher 35HD - page 46
-
Karcher 35HD - page 47
4. Using the Menus Continued on next page Contents 4. Using the Menus 4.1 Introduction ................................................................................................................... .......... 4.4 Menu structure ................................................................................................................. ... ...
-
Karcher 35HD - page 48
-
Karcher 35HD - page 49
-
Karcher 35HD - page 50
-
Karcher 35HD - page 51
-
Karcher 35HD - page 52
-
Karcher 35HD - page 53
-
Karcher 35HD - page 54
-
Karcher 35HD - page 55
-
Karcher 35HD - page 56
-
Karcher 35HD - page 57
-
Karcher 35HD - page 58
-
Karcher 35HD - page 59
-
Karcher 35HD - page 60
-
Karcher 35HD - page 61
-
Karcher 35HD - page 62
-
Karcher 35HD - page 63
-
Karcher 35HD - page 64
-
Karcher 35HD - page 65
-
Karcher 35HD - page 66
-
Karcher 35HD - page 67
-
Karcher 35HD - page 68
-
Karcher 35HD - page 69
-
Karcher 35HD - page 70
-
Karcher 35HD - page 71
-
Karcher 35HD - page 72
-
Karcher 35HD - page 73
-
Karcher 35HD - page 74
-
Karcher 35HD - page 75
-
Karcher 35HD - page 76
-
Karcher 35HD - page 77
5. Maintenance Contents 5. Maintenance 5.1 Changing the lamp .............................................................................................................. .... 5.2 Lamp-hours meter ............................................................................................................... ............................ 5.3 Changin ...
-
Karcher 35HD - page 78
-
Karcher 35HD - page 79
-
Karcher 35HD - page 80
-
Karcher 35HD - page 81
-
Karcher 35HD - page 82
-
Karcher 35HD - page 83
6. Appendix Contents 6. Appendix 6.1 T roubleshooting ................................................................................................................ ...... 6.2 Specifications ................................................................................................................. ......... 6.4 Part numbers ................ ...
-
Karcher 35HD - page 84
-
Karcher 35HD - page 85
-
Karcher 35HD - page 86
-
Karcher 35HD - page 87
-
Karcher 35HD - page 88
-
Karcher 35HD - page 89
-
Karcher 35HD - page 90
-
Karcher 35HD - page 91
-
Karcher 35HD - page 92
-
Karcher 35HD - page 93
-
Karcher 35HD - page 94
-
Karcher 35HD - page 95
-
Karcher 35HD - page 96
-
Karcher 35HD - page 97
-
Karcher 35HD - page 98
-
Karcher 35HD - page 99
-
Karcher 35HD - page 100
-
Karcher 35HD - page 101
-
Karcher 35HD - page 102
-
Karcher 35HD - page 103
-
Karcher 35HD - page 104
-
Karcher 35HD - page 105
-
Karcher 35HD - page 106
-
Karcher 35HD - page 107
-
Karcher 35HD - page 108
Haben Sie eine Frage bezüglich Karcher 35HD?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Karcher 35HD nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Karcher 35HD hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.