Deutsch dropdown-ico

Bedienungsanleitung Icom IGM1600

32 Seiten 0.6 mb
Download

Zur Seite of 32

Summary
  • Icom IGM1600 - page 1

    INSTRUCTION MANUAL iGM1600 SURVIV AL CRAFT 2-W A Y RADIO This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful inter- ference. ...

  • Icom IGM1600 - page 2

    i SAFETY TRAINING INFORMA TION Y our Icom radio generates RF electromagnetic energy during transmit mode. This radio has been evaluated for compliance at the distance of 2.5 cm with the FCC RF exposure limits for “Occupational Use Only”. In addition, your Icom radio complies with the fol- lowing Standards and Guidelines with regard to RF energy ...

  • Icom IGM1600 - page 3

    ii RECOMMENDA TION CLEAN THE TRANSCEIVER THOROUGHL Y WITH FRESH W A TER after exposure to saltwater , and dry it before opera- tion. Otherwise, the transceiver ’s keys, switches and con- trollers may become inoperable due to salt crystallization. NOTE: DO NOT remove the battery pack when cleaning the transceiver thoroughly with fresh water . W at ...

  • Icom IGM1600 - page 4

    iii PRECAUTION R W ARNING! NEVER connect the transceiver to an AC outlet. This may pose a fire hazard or result in an electric shock. R W ARNING! NEVER hold the transceiver so that the antenna is closer than 2.5 cm (1 inch) from exposed parts of the body , especially the face or eyes, while transmitting. The transceiver will perform best if the mi ...

  • Icom IGM1600 - page 5

    iv SAFETY TRAINING INFORMA TION ............................................... i RECOMMENDA TION ...................................................................... ii FOREWORD ................................................................................... ii IMPORT ANT ....................................................................... ...

  • Icom IGM1600 - page 6

    1 OPERA TING RULES 1 D Priorities • Read all rules and regulations pertaining to priorities and keep an up-to-date copy handy . Safety and distress calls take priority over all others. • Y ou must monitor Channel 16 when you are not operating on another channel. • False or fraudulent distress calls are prohibited under law . D Privacy • Inf ...

  • Icom IGM1600 - page 7

    2 2 SUPPLIED ACCESSORIES AND A TT ACHMENTS 1 2 ■ Supplied accessories The following accessories are supplied: Qty . q Handstrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 w Battery charger (BC-158) . . . . . . . . . . . . . . . . . . . . . . . . 1 e Belt clip (MB-103Y) . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Icom IGM1600 - page 8

    3 2 SUPPLIED ACCESSORIES AND A TT ACHMENTS ï Battery pack T o remove the battery pack: T urn the screw counterclockwise, then pull the battery pack in the direction of the arrow as shown below . T o attach the battery pack: Insert the battery pack in the IC-GM1600 completely , then turn the screw clockwise. NEVER remove or insert the battery pack ...

  • Icom IGM1600 - page 9

    4 3 P ANEL DESCRIPTION 2 3 ■ Front, top and side panels q VOLUME CONTROL [VOL] T urns power ON and adjusts the audio level. w MICROPHONE CONNECTOR [MIC/SP] Connects the optional external microphone. NOTE: Attach the [MIC/SP] cap when the optional speaker-microphone is not used. e ANTENNA Fixed type. r TRANSMIT/RECEIVE INDICA T OR Lights green whi ...

  • Icom IGM1600 - page 10

    5 3 P ANEL DESCRIPTION i CHANNEL 16 KEY [16] Selects Channel 16 when pushed. (p. 7) o CHANNEL UP/DOWN KEYS [ Y Y ]/[ Z Z ] ➥ Selects an operating channel. (pgs. 7 – 8) ➥ Selects the SET mode condition of the item. (p. 1 1) ➥ Selects the SET mode item when pushed with [SQL]. (p. 1 1) !0 SQUELCH SWITCH [SQL • MONI ] ➥ Push this switch, th ...

  • Icom IGM1600 - page 11

    6 3 P ANEL DESCRIPTION 3 t BA TTER Y INDICA TOR Indicates remaining battery power . y VOX INDICA T OR “ VOX ” appears when the VOX function is used. (p. 10) u SET MODE ITEM READOUT Indicates the SET mode items while in the SET mode. (p. 1 1) i LOCK INDICA T OR Appears when the lock function is activated. (p. 10) o CHANNEL NUMBER READOUT ➥ Ind ...

  • Icom IGM1600 - page 12

    7 BASIC OPERA TION 4 ■ Channel selection D Channel 16 Channel 16 (Distress channel) is used for establishing initial contact with another station and for emergency communica- tions. While standing by , you must monitor Channel 16. q Push [16] to select Channel 16. w Push [CH] to return to the condition before selecting Chan- nel 16, or push [ Y ] ...

  • Icom IGM1600 - page 13

    8 4 BASIC OPERA TION 4 ■ Receiving and transmitting q Rotate [VOL] clockwise to turn power ON. w Set the volume and squelch level. ➥ Push [SQL • MONI ], and push [ √ ] to open the squelch. ➥ Push [SQL • MONI ] to stop the “ SQL ” indicator blinking, then rotate [VOL] to set the volume level. ➥ Push [SQL • MONI ], and push [ ∫ ...

  • Icom IGM1600 - page 14

    9 4 BASIC OPERA TION ■ Call channel programming The call channel switch is used to select Channel 9* by de- fault, however , you can program your most often-used chan- nel for quick recall. *The channel number depends on version. q Push [CALL] to select the call chan- nel. •“ CALL ” and call channel number appear . w Push [CALL] again for 3 ...

  • Icom IGM1600 - page 15

    10 4 BASIC OPERA TION 4 ■ Lock function This function electronically locks all keys (except for [PTT], [SQL • MONI ] and [Hi/Lo • ]) to prevent accidental channel changes and function access. ➥ Push [Hi/Lo • ] for 1 sec. to turn the lock function ON and OFF . ■ Signal strength indicator The received signal strength level is indicated by ...

  • Icom IGM1600 - page 16

    11 SET MODE 5 ■ SET mode programming SET mode is used to change the condition of 1 1 transceiver functions: beep tone function, monitor switch action, back- lighting function, LCD contrast selection, auto power save function, self check function, battery voltage indicator , signal strength indicator , squelch sensitivity function, VOX gain* and V ...

  • Icom IGM1600 - page 17

    12 5 SET MODE 5 ■ SET mode items D Beep tone function “ bP ” Y ou can select silent operation by turning the beep tones OFF , or you can have 2 types of con fi rmation beeps sound at the push of a key . When “ ON ” is selected, a fi xed beep (Pi) sounds, and when “ US ” is selected, the preset beeps (e.g. do, re, mi) sound. • Beep ...

  • Icom IGM1600 - page 18

    13 5 SET MODE D Auto power save function “ PS ” The auto power save function reduces battery drain by deac- tivating the receiver circuit for preset intervals. • ON : The power save function is turned ON. The power save func- tion will activate when no signal is received, and no operation is performed for 5 sec. • OFF: The power save functi ...

  • Icom IGM1600 - page 19

    14 5 SET MODE 5 D Battery voltage indicator “ bt ” This function controls display or non-display settings of the connected battery pack ’ s voltage when the power is ON. • The voltage of the connected battery pack is displayed for 2 sec. after power is turned ON. D Signal strength indicator “ Sl ” The signal strength indicator displays ...

  • Icom IGM1600 - page 20

    15 5 SET MODE D VOX delay “ dL ” (A vailable for on-board use only) Sets the VOX delay timer (0.5 to 3.0 sec. in 0.5 sec. steps) keeping the radio in transmit mode after you stop speaking. • Setting the delay to 0.5 (0.5 sec.) is a short VOX delay . • Setting the delay to 3.0 (3.0 sec.) is a long VOX delay . SET MODE LIST *default setting P ...

  • Icom IGM1600 - page 21

    16 6 BP-234 BA TTER Y P ACK 5 6 The optional BP-234 battery pack is a non-rechargeable, Lithium battery pack for operation in a survival craft. The fol- lowing precaution must be observed. • NEVER dispose of the BP-234 battery pack in a fi re. This could re- sult in an explosion. • DO NOT short-circuit the BP-234 battery pack. Metal contact (s ...

  • Icom IGM1600 - page 22

    17 BA TTER Y CHARGING (FOR ON-BOARD USE ONL Y) 7 ■ Battery charging Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. CAUTION: T o avoid damage to the transceiver , turn the power OFF while charging. • Recommended temperature range for charging: +10 ° C to +40 ° C (+50 ° ...

  • Icom IGM1600 - page 23

    18 7 BA TTERY CHARGING (FOR ON-BOARD USE ONL Y) 7 ï Charging connections q Attach the BC-158 to a fl at surface, such as a desk. w Connect the AC adapter as shown below . e Insert the battery pack with/without the transceiver into the charger . • The charge indicator lights green. r Charge the battery pack approx. 8 hours, depending on the rema ...

  • Icom IGM1600 - page 24

    19 7 BA TTERY CHARGING (FOR ON-BOARD USE ONL Y) ■ Optional battery chargers ï AD-109 installation q Connect the charger ’ s 10-pin connector to the AD-109 desktop charger adapter ’ s plug. NOTE: The 3-pin connector is not used. w Install the adapter into the charger in the direction of the arrow , then use the supplied 2 screws to attach the ...

  • Icom IGM1600 - page 25

    20 7 BA TTERY CHARGING (FOR ON-BOARD USE ONL Y) 7 ï Rapid charging with the BC-1 19N+AD-109 The optional BC-1 19N provides rapid charging of battery packs. The following are additionally required. • AD-109 charger adapter • An AC adapter (BC-145A/E)* 1 or the DC power cable (OPC-515L/CP-17L). * 1 Depends on version. ï Rapid charging with the ...

  • Icom IGM1600 - page 26

    21 OPTIONAL SWIVEL BEL T CLIP 8 ■ MB-86 contents Qty . Belt clip ………………………………………………………… 1 Base clip ……………………………………………………… 1 Supplied screws ……………………………………………… 2 ■ Attachment q Screw the base clip to the back of the transceiv ...

  • Icom IGM1600 - page 27

    22 9 OPTIONAL SPEAKER-MICROPHONE (FOR ON-BOARD USE ONL Y) 8 9 ■ HM-125 descriptions NEVER immerse the connector in water without connecting with the transceiver . If the connector becomes wet, be sure to dry BEFORE connecting it to the transceiver . NOTE: The microphone is located at the top of the speaker-microphone, as shown in the diagram abov ...

  • Icom IGM1600 - page 28

    23 CHANNEL LIST FOR SUR VIV AL OPERA TION 10 Channel number TX/RX Channel number TX/RX Channel number TX/RX 06 156.300 MHz 08 156.400 MHz 09 156.450 MHz 10 156.500 MHz 1 1 156.550 MHz 12 156.600 MHz 13 156.650 MHz 14 156.700 MHz 15* 156.750 MHz 16 156.800 MHz 17* 156.850 MHz 67 156.375 MHz 68 156.425 MHz 69 156.475 MHz 71 156.575 MHz 72 156.625 MHz ...

  • Icom IGM1600 - page 29

    24 11 TROUBLESHOOTING 10 11 The transceiver does not turn ON. No sound from the speaker . T ransmitting is impos- sible, or high power can not be selected. The displayed channel cannot be changed. No beeps. Self check error . (T emperature) Self check error . (Battery voltage) T ransmitting continu- ously while not speak- ing when using VOX functio ...

  • Icom IGM1600 - page 30

    25 SPECIFICA TIONS 12 D GENERAL • Frequency coverage TX/RX : 156.300 – 156.875 MHz • Mode : 16K0G3E • Channel spacing : 25 kHz • Power supply requirement : Battery packs (BP-234 or BP- 224*) *For on-board use only • Current drain (approx.) : TX High (2 W) 1.0 A at 7.5 V DC for [USA] TX Low (1 W) 700 mA at 7.2 V DC for [GEN] Max. audio 2 ...

  • Icom IGM1600 - page 31

    26 13 OPTIONS 12 13 D BA TTER Y P ACKS <FOR SURVIV AL CRAFT USE> • BP-234 LITHIUM BA TTERY P ACK 9.0 V/3300 mAh Lithium battery pack. <FOR ON-BOARD USE> • BP-224 Ni-Cd BA TTERY P ACK 7.2 V/750 mAh Ni-Cd battery pack. • BP-225 Ni-Cd BA TTERY P ACK 7.2 V/1 100 mAh Ni-Cd battery pack. D BEL T CLIPS • MB-103Y BEL T CLIP The same as ...

  • Icom IGM1600 - page 32

    1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A-6383D-1EX Printed in Japan © 2004 Icom Inc. ...

Produzent Icom Kategorie Two-Way Radio

Dokumente, die wir vom Produzenten des Geräts Icom IGM1600 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Icom
- Bedienungsanleitungen IGM1600
- Produktkarten Icom
- Informationsbroschüren
- oder Energieetiketten Icom IGM1600
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Icom IGM1600.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Icom IGM1600, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Icom IGM1600. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Icom IGM1600 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Icom IGM1600, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Icom IGM1600 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Icom IGM1600 verständlich ist.

Eine gänzliche Bedienungsanleitung von Icom sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Icom IGM1600 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Icom IGM1600 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Icom IGM1600, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Icom IGM1600 - die uns die ersten Schritte während der Nutzung von Icom IGM1600 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Icom IGM1600 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Icom IGM1600 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Icom IGM1600?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Icom IGM1600 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Icom IGM1600 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)