Bedienungsanleitung Echo ES-210

24 Seiten 0.5 mb
Download

Zur Seite of 24

Summary
  • Echo ES-210 - page 1

    SHRED 'N' V AC ® Operator's Manual MODEL ES-210 Serial Number 05001001 - 05999999 X753000720 03/03 X7531130200 W ARNING DANGER Read rules for safe operation and all instructions carefully. ECHO provides this Operator's Manual which must be read and understood for proper and safe operation. ...

  • Echo ES-210 - page 2

    2 I NTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual. You will find it easy to use and full of helpful operating tips and SAFETY messages. THE OPERA T OR ' S MANUAL Read and understand this manual before operation. Keep it ...

  • Echo ES-210 - page 3

    3 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL IMPORTANT The enclosed message provides information necessary for the protection of the unit. NOTE This enclosed message provides tips for use, care and maintenance of the unit. S AFETY DECALS Locate these safety decals on your unit. Make sure the decals are legible and that you understand ...

  • Echo ES-210 - page 4

    4 W ARNING DANGER SHRED ‘N’ VAC® users risk injury to themselves and others if the SHRED ‘N’ VAC® is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating SHRED ‘N’ VAC®. INTERNA TIONAL SYMBOLS SYMBOL Carburetor Adjustment - Idle speed Carburetor Adjustment - High spee ...

  • Echo ES-210 - page 5

    5 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL EQUIPMENT • Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed. • Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found. • Do not use blower if any part is missing or damaged. • Do not use any at ...

  • Echo ES-210 - page 6

    6 IMPORTANT ENGINE INFORMATION ENGINE FAMILY: 3EHXS.0214EA DISPLACEMENT: 21.2 cc EMISSION COMPLIANCE PERIOD: 300 Hours THIS ENGINE MEETS U.S. EPA PH 2 EMISSION REGULATIONS FOR SMALL NONROAD ENGINES. REFER TO OWNER'S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS. SAFE OPERA TION W ARNING DANGER Do not operate this product indoors or in ...

  • Echo ES-210 - page 7

    7 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL 1 2 3 5 6 7 8 9 10 11 12 4 13 14 D ESCRIPTION CONTENTS __ 1 - Power Head __ 1 - Straight Pipe __ 1 - Pipe with Nozzle __ 1 - SHRED 'N' VAC ® Suction Tube __ 1 - Elbow Pipe __ 1 - Debris Bag __ 1 - Operator's Manual __ 1 - Warranty Registration Card __ 1 - ECHO Emissions and ...

  • Echo ES-210 - page 8

    8 14. BLOWER PIPES - Twist lock design. 15. PRIMER BULB - Pumping primer bulb before starting engine draws fresh fuel from the fuel tank, priming the carburetor for starting. Pump primer bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times. 16. CHOKE - Choke is located on the side of t ...

  • Echo ES-210 - page 9

    9 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL A SSEMBL Y W ARNING DANGER Never perform maintenance or assembly procedures with engine running, or serious personal injury may result. BLOWER APPLICA TION Install Blower Pipes 1 . Align grooves in straight pipe with pegs on blower housing and slide pipe onto housing. 2 . Turn straight pipe ...

  • Echo ES-210 - page 10

    10 4 . Align grooves in discharge elbow with pegs on blower, and slide elbow (D) on to blower. Turn elbow counterclockwise to lock in place. Elbow must angle back toward operator position as shown. 5 . Place debris bag opening over flared end of elbow, and cinch bag (E) securely with Velcro strap. D E ...

  • Echo ES-210 - page 11

    11 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL IMPORTANT Spilled fuel is a leading cause of hydrocar- bon emissions. Some states may require the use of automatic fuel shut-off contain- ers to reduce fuel spillage. Contact your ECHO dealer for ordering information. After Refueling • Wipe any spilled fuel from the unit. • Move at lea ...

  • Echo ES-210 - page 12

    12 O PERA TION ST ARTING COLD ENGINE 1. Stop Switch Move stop switch button (A) away from the STOP position. 2. Throttle Position Lever Move throttle position lever (B) midway between idle and full throttle positions. 3. Choke Move choke (C) to Cold Start ( ) Position. 4. Primer Bulb Pump primer bulb (D) until fuel is visible and flows freely in th ...

  • Echo ES-210 - page 13

    13 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL ST ARTING W ARM ENGINE The starting procedure is the same as Cold Start except DO NOT close the choke. 1. Stop Switch Move stop switch button (A) away from the STOP position. 2. Throttle Position Lever Move throttle position lever (B) forward to idle position. 3. Primer Bulb Pump primer bu ...

  • Echo ES-210 - page 14

    14 BLOWER OPERA TION W ARNING DANGER Always wear safety glasses, hearing protection and a face filter mask or serious personal injury may result. Do not point the blower pipe in the direction of people or pets. Never operate unit without either housing cover grill or vacuum tube installed on unit securely, otherwise bodily harm may result. Read the ...

  • Echo ES-210 - page 15

    15 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL SHRED ‘ N ’ VA C ® OPERA TION W ARNING DANGER Flying debris hazard. Never operate unit as a vacuum unless discharge elbow is installed and debris bag is securely cinched to elbow. Failure to follow instructions can result in serious injuries. 1 . Adjust debris bag strap to support bag ...

  • Echo ES-210 - page 16

    16 M AINTENANCE Your ECHO blower is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your blower achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOUR ...

  • Echo ES-210 - page 17

    17 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL AIR FIL TER Level 1. Tools required: 25-50 mm (1-2 in.) cleaning brush. Parts required: Air Filter NOTE Clean daily. 1 . Close choke (Cold Start Position [ ]). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumulated dirt from the air cleaner ...

  • Echo ES-210 - page 18

    18 COOLING SYSTEM CLEANING Level 2. Tools required: 25-50 mm (1-2 in.) cleaning brush, 3 mm hex wrench, cross head screwdriver Parts Required: None, if you are careful. IMPORTANT To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area. This flow of air carries combustion heat away from the engine ...

  • Echo ES-210 - page 19

    19 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL EXHAUST SYSTEM Spark Arrestor Screen Level 2. Tools required: Cross Head Screwdriver, 3 mm Hex Wrench, soft metal brush Parts Required: Spark arrestor screen P/N 14586240630, Gasket P/N 14586642031 IMPORTANT Carbon deposits in muffler will cause a drop in engine output and overheating. Spa ...

  • Echo ES-210 - page 20

    20 SHREDDER BLADE Level 1. W ARNING DANGER Never remove vacuum tube or open fan guard when SHRED ‘N’ VAC ® is running or serious personal injury may result. Always wear heavy-duty work gloves when working in shredder blade area. 1 . With engine stopped, remove spark plug wire, loosen clamp and pull vacuum tube from unit. 2 . Remove accumulated ...

  • Echo ES-210 - page 21

    21 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL CARBURETOR ADJUSTMENT Engine Break-In New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break- in period your engine performance will increase and exhaust emissions will stabilize. Idle speed can be adjusted ...

  • Echo ES-210 - page 22

    22 W ARNING DANGER Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark by ground- ing spark plug against cylinder, otherwise serious personal injury may result. T ROUBLESHOOTING T R A H C G N I T O O H S E L B U O R T m e l b o r Pk c e h Cs u t a t Se s u a Cy d e m e R - s k n a r c e n i g n E / ...

  • Echo ES-210 - page 23

    23 S HRED 'N' V AC ® O PERA TOR ' S M ANUAL S TORAGE W ARNING DANGER During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result. Long T erm Storage (Over 3 ...

  • Echo ES-210 - page 24

    DEALER? Call 1-800-432-ECHO or www.echo-usa.com CONSUMER PRODUCT SUPPORT 1-800-673-1558 8:30 - 4:30 Mon - Fri C.S.T. ECHO, INCORPORA TED 400 Oakwood Road Lake Zurich, IL 60047 www .echo-usa.com Available Parts Catalog ES-210 Serial Number 05001001 - 05999999 Part Number 99922203283 S E RVICING I NFORMA TION P ARTS Genuine ECHO Parts and ECHO REPOWE ...

Produzent Echo Kategorie Chipper

Dokumente, die wir vom Produzenten des Geräts Echo ES-210 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Echo
- Bedienungsanleitungen ES-210
- Produktkarten Echo
- Informationsbroschüren
- oder Energieetiketten Echo ES-210
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Echo ES-210.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Echo ES-210, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Echo ES-210. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Echo ES-210 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Echo ES-210, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Echo ES-210 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Echo ES-210 verständlich ist.

Eine gänzliche Bedienungsanleitung von Echo sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Echo ES-210 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Echo ES-210 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Echo ES-210, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Echo ES-210 - die uns die ersten Schritte während der Nutzung von Echo ES-210 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Echo ES-210 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Echo ES-210 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Echo ES-210?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Echo ES-210 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Echo ES-210 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)