Bedienungsanleitung Lynx Series 5000 Rack Frame

39 Seiten 1.13 mb
Download

Zur Seite of 39

Summary
  • Lynx Series 5000 Rack Frame - page 1

    Series 5000 © LYNX Tech nik AG Brunnenweg 3 64331 Weiterstadt Germ any www.l ynx-techn ik.com Reference Manual R FR 5010 / R FR 5011 Series 5000 Rack Frame CardModul e Ver 2.0 ...

  • Lynx Series 5000 Rack Frame - page 2

    Reference Manual R FR 5010 Versio n1.4 Page 2 Infor matio n in this d ocum ent is subjec t to chan ge wit hout notice. No part of thi s docu ment may be reproduced or tra ns mit te d in an y fo rm o r by any mean s, ele ctr on ic or mechani cal for any purpose, wi thout express written pe rmission of LYNX Techni k AG. LYNX Technik AG may have paten ...

  • Lynx Series 5000 Rack Frame - page 3

    Reference Manual R FR 5010 Versio n1.4 Page 3 WARNING Electrical supplies in excess of 50 ( fifty) volts peak value are potentially hazardous or lethal. AC supplies b etween 100 and 250 peak volts exist w ithin the rack fr ame chassis when connected to AC pow er. Only qualified personnel should service th e rack frame assembly. Removal of techni ca ...

  • Lynx Series 5000 Rack Frame - page 4

    Reference Manual R FR 5010 Versio n1.4 Page 4 WARNUNG ! Wenn das Gerät an das Wechselstrom netz angeschlossen ist, treten innerhalb des Gerätes Wechselspannungen zwischen 100 und 250 V auf, di e potentiell gefährlich oder tödlich sein können. Desh alb darf Reparatur und Instandhaltung nur von qualifiziertem Personal durchgeführt werden. Das E ...

  • Lynx Series 5000 Rack Frame - page 5

    Reference Manual R FR 5010 Versio n1.4 Page 5 This Page is intentionally left blank ...

  • Lynx Series 5000 Rack Frame - page 6

    Reference Manual R FR 5010 Versio n1.4 Page 6 Warranty LYNX Technik AG warrants that the product will be free fro m defects in materials an d workma nship for a period of two (2) years fro m the dat e of shipm ent. If thi s product pr oves defecti ve during the warranty peri od, LYNX Technik AG at i ts option will either rep air the de fective prod ...

  • Lynx Series 5000 Rack Frame - page 7

    Reference Manual R FR 5010 Versio n1.4 Page 7 Regulatory information Europe Declar ation of Co nformit y USA FCC 47 Part 15 This device compli es with part 15 of the FCC Rules. Operation i s subject to the following two conditi ons: (1) This device may not cause harmful interfer ence, and (2) this device must acc ept any interf erence rec eived, in ...

  • Lynx Series 5000 Rack Frame - page 8

    Reference Manual R FR 5010 Versio n1.4 Page 8 Contents Warranty ........... .................... ................... ................. ................ 6 Regulatory information .... .................... ................... ................ 7 Europe .................. ...................................... ................ ............ .......... 7 ...

  • Lynx Series 5000 Rack Frame - page 9

    Reference Manual R FR 5010 Versio n1.4 Page 9 Electrical Installation. ... ............................................. ............ 31 Install ation In structions . ............................................. ............ 32 Installat ions-Anweisun g ................. .............................. ......... 33 Settings and Control ........ ... ...

  • Lynx Series 5000 Rack Frame - page 10

    Reference Manual R FR 5010 Versio n1.4 Page 10 Getting Started Packaging The shipping carton and packaging m a terials provide protecti o n for the module during transit. Please retain the ship ping cartons in case subseque nt shipping of the product becomes necessary. Product Description The R FR 5010 / R FR 5011 is a high quality 2 RU high 19 inc ...

  • Lynx Series 5000 Rack Frame - page 11

    Reference Manual R FR 5010 Versio n1.4 Page 11 board multifunction LED has various s t ates to indicate dif ferent alarm condit ions and a separate GPO alarm output is provid ed for connection to an external monitoring system. The system is co nvection cooled plus forced air- cooling (low noise fans) so it can be u s ed in areas where noise level i ...

  • Lynx Series 5000 Rack Frame - page 12

    Reference Manual R FR 5010 Versio n1.4 Page 12 Rack Layout Figure 2 and 3 shows explo ded view s of th e R FR 5010 / R FR 5011 . The Front cover is removed and not shown. CardModule Mid Rack Verti cal Supp ort Mou nti ng rails on rear of rack fo r connec ti on pane ls Cauti on : Do not obstruct ve ntialti on hol es on top and bo ttom si des of rack ...

  • Lynx Series 5000 Rack Frame - page 13

    Reference Manual R FR 5010 Versio n1.4 Page 13 Figure 3 – Exploded r ack view For clarity (to show rack construction) power supplies, rear termination panel and conne ction panels for the modules have been omitted. Caut i on : Do not obstruct ventilation holes on top and bottom si des of rack. Refer to mounting instructions for m ore details. Mid ...

  • Lynx Series 5000 Rack Frame - page 14

    Reference Manual R FR 5010 Versio n1.4 Page 14 Power Supply The R FR 5010 / R FR 5011 includes the primary power supply. A secon d identical p ower supply can be added for redundancy. The Power su pply is a sophisticate d design designed for critical applications and includes po wer filtering and integral micro processor . This monito rs the supp l ...

  • Lynx Series 5000 Rack Frame - page 15

    Reference Manual R FR 5010 Versio n1.4 Page 15 Power Supply seen from Front Sec uri n g Scr ew Integral Fan Handle for rem oval LED A l arm indicator Figure 4: Power Suppl y ...

  • Lynx Series 5000 Rack Frame - page 16

    Reference Manual R FR 5010 Versio n1.4 Page 16 Rear Termination Pan el The R FR 5010/ R FR 5011 ha s an integral termination panel on the rear of the rack for the connection of power and various other connections for expansion and interfacing. Figure 5 Figure 5 R ear Panel Conn ections Rack Connections Power Co nnection There are two pow er connect ...

  • Lynx Series 5000 Rack Frame - page 17

    Reference Manual R FR 5010 Versio n1.4 Page 17 ! ! A stud is provi d ed on the termination panel for the connectio n of an ext ernal ground . (Figure 5) Note: the chassis is permanently grounde d via the AC connections. Caution Service to be performed by qualified personnel only Caution Please remov e power before attempting to exchange a power fus ...

  • Lynx Series 5000 Rack Frame - page 18

    Reference Manual R FR 5010 Versio n1.4 Page 18 Alarm Function This function requires the controller option. The user can assig n triggers for the preferre d Major / Minor and No Alarm conditi ons using the co ntroller and supplied sof tware. The alarm connecto r provides GPO co ntacts for 2 alarm levels and a GPI inpu t for future use. This allows ...

  • Lynx Series 5000 Rack Frame - page 19

    Reference Manual R FR 5010 Versio n1.4 Page 19 Extend Connection Bus Extension . Thi s connect ion is used to inte rface racks together when using the optional LYNX control system. This is a simple (and inexpe nsive) way to extend the reach of the host RCT 5020 controller into several mo re racks fitted with RCT 5010 bus expanders. It uses a propri ...

  • Lynx Series 5000 Rack Frame - page 20

    Reference Manual R FR 5010 Versio n1.4 Page 20 Control Connectio n An external Control Interf ace is provided on the rear termination panel. When an R CT 5020 Rack Controller (or R CT 5030 Master Controller) is fitted to the rack this port ca n be used for two primary functions: 1. When configured as a RS 232 seri al port thi s can be connected dir ...

  • Lynx Series 5000 Rack Frame - page 21

    Reference Manual R FR 5010 Versio n1.4 Page 21 LAN Connection This is a standard RJ4 8 connection and i s used to provide stand ard TCP/IP n etwork cont rol connectivity into a contr ol system. To be operational this port requires the R CT 5030 Master Controller is fi tted to the rack. Please see the refe rence manual for the R CT 50 30 for more de ...

  • Lynx Series 5000 Rack Frame - page 22

    Reference Manual R FR 5010 Versio n1.4 Page 22 Alarm/LED Status Indicators There are a number of status / alarm ind icators visible throu gh the front panel of the R FR 5010 Rack frame. Figure 9. Figure 9. LEDs and i ndicator locations and functi on ...

  • Lynx Series 5000 Rack Frame - page 23

    Reference Manual R FR 5010 Versio n1.4 Page 23 Power Supply LED Indicators The Table below shows the erro r conditions for the LED on the power supply units. These are visible through the ve ntilation holes on the left si d e of the front of the rack (figure 9) Fan Alar m LED (R FR 5011 only) The Table below shows the erro r conditions for the LED ...

  • Lynx Series 5000 Rack Frame - page 24

    Reference Manual R FR 5010 Versio n1.4 Page 24 Rack Configuration Assembly If starting with an empty R FR 5010 / R FR 5011 rack frame please follo w the following steps for correct installation of the Series 5000 Card Modules Rack Layo ut Considerations If you have a variety of module types it’s a good idea to plan the order in which you install ...

  • Lynx Series 5000 Rack Frame - page 25

    Reference Manual R FR 5010 Versio n1.4 Page 25 Redunda nt Power Supply The basic RFR 5010 / R FR 5011 is supplied with the primary powe r supply installed. The redundant supply (option) is installed next to the primary supply. Remote Controller Depending on your system design you m ay hav e one of th e LYNX controller options av ailable (RCT 5010, ...

  • Lynx Series 5000 Rack Frame - page 26

    Reference Manual R FR 5010 Versio n1.4 Page 26 D AA3320 W IN L IN R OUT L1 OUT R1 OUT L2 OUT R2 OUT L3 OUT L4 OUT R3 OUT R4 DUAL AUDIO ANALOG DIST AMP D AA3320 D IN OUT DUAL ANALOG AUDIO DISTRIBUTION AMP C DA 3000 SDI IN 8 B IT SD I TO A NAL OG CON VERTER LYNX Tec hnik AG nc SDI out 1 G / Y out B / U out R / V out SDI out 2 CVBS out Y (S-v id)out C ...

  • Lynx Series 5000 Rack Frame - page 27

    Reference Manual R FR 5010 Versio n1.4 Page 27 Hot Swapping Power Supplies The Series 5000 Card Modules and Power Supplies are fully hot swappable in the event of a fault or failure. Power Supply Fa ilure A failure in the Pr imary power suppl y will automa tically trigg er the use of the redundant supply (if fi tted) and wi ll trigger t he followin ...

  • Lynx Series 5000 Rack Frame - page 28

    Reference Manual R FR 5010 Versio n1.4 Page 28 Rack Installation If you have an empty R FR 5010 rack frame we recommend you assemble the connectio n plates and modules as well as any options such as the redundant power supply and controller before mounting the Rack Fram e into a 19” inch rack. (Please refer to assembly sectio n) Locati on The R F ...

  • Lynx Series 5000 Rack Frame - page 29

    Reference Manual R FR 5010 Versio n1.4 Page 29 5101 rack frame may (due to the small airf low gap) restri ct the flow of ai r to this piece of equipmen t. Also do not place equi pment or objects on top of the R FR 5010 rack frame th at could restrict airflow from the top of the rack. This may ca use malfunction and damage due to ex cessive heat bui ...

  • Lynx Series 5000 Rack Frame - page 30

    Reference Manual R FR 5010 Versio n1.4 Page 30 Fig.11: Sub D 9 Connector on Front Cover of R FR 5011 Fig.12: Sub D 9 Connector on right si de of R FR 5011 ...

  • Lynx Series 5000 Rack Frame - page 31

    Reference Manual R FR 5010 Versio n1.4 Page 31 ! ! Electrical Installation. Electrical power is connected to the R FR 5010 / R FR 5011 ch assis via the two I EC power connectors located on the termination panel on the rear of the rack. Th ere is n o power swit ch provided . Two separate and isolated power connections are available, one for the prim ...

  • Lynx Series 5000 Rack Frame - page 32

    Reference Manual R FR 5010 Versio n1.4 Page 32 Installation Instructions The rack frame chassis R FR 5010 / R FR 5011 is intende d for operation in broadcast environments. The operation in excessive d ust and moisture o r extreme temperature requi res special provisions like • dust filters • air conditioning • avoi dance of conden sed wate r. ...

  • Lynx Series 5000 Rack Frame - page 33

    Reference Manual R FR 5010 Versio n1.4 Page 33 Installa tions-Anweisung Das Ger ät R FR 501 0 / R FR 5011 ist fü r Anwendungen in Fernsehstudios vorgesehen. Der Einsatz in erhöhter stau biger und feuchter Umg ebung o der außergew öhnlich en Temperaturen erford ert beson dere Maßnahmen wie • Klim atisieru ng • Staubfilter • Verm eiden vo ...

  • Lynx Series 5000 Rack Frame - page 34

    Reference Manual R FR 5010 Versio n1.4 Page 34 Settings and Control There are no specific setting and control parameters fo r the card rack. This is pro vided via controller o ption (i f fitted) an d the individ ual CardModule assemblies. Please refer to the refe rence ma nuals supplied wi th these ite ms for details on sp ecifi c sett i ngs an d c ...

  • Lynx Series 5000 Rack Frame - page 35

    Reference Manual R FR 5010 Versio n1.4 Page 35 Specifications (R FR 5010 / R FR 5011) Mechanical Size 2 RU high x 32.5 cm deep including connectors and front cover. 31 cm without front cover. Standard 19” rack mount. Weight (empty) R FR 5010: 4 kg with single power supply R FR 5011: 4,25 kg with single power supply Connections All connections mad ...

  • Lynx Series 5000 Rack Frame - page 36

    Reference Manual R FR 5010 Versio n1.4 Page 36 Available Options Below is a list of available options for the R FR 50 10 rack frame. Please refer to product brochures or our web site for more detailed inform ation. Model Descripti on R FR 5010 / R FR 5011 Series 5000 Rack Frame (e mpty) with single power supply R PS 5010 Redu ndant p ower supply fo ...

  • Lynx Series 5000 Rack Frame - page 37

    Reference Manual R FR 5010 Versio n1.4 Page 37 Parts List There are no user serviceable electron ic assemblies within the R FR 501 0 module. The parts list below shows high-l evel sub assemblies used in this rack, which can be ordered separate ly for maintena nce purposes. R FR 5010 Rack Frame (complete ) Description Series 5000 Rack Fram e Model N ...

  • Lynx Series 5000 Rack Frame - page 38

    Reference Manual R FR 5010 Versio n1.4 Page 38 Contact Information Please contact your local d i stributor; this is your local a nd faste st method f o r ob taining su pport and sales information. Lynx Technik can be cont acted directly using the information below. Address LYNX Tec hnik AG Brunnenweg 3 64331 Weiterst adt German y Website www.lynx-t ...

  • Lynx Series 5000 Rack Frame - page 39

    Reference Manual R FR 5010 Versio n1.4 Page 39 Notes ...

Produzent Lynx Kategorie Computer Accessories

Dokumente, die wir vom Produzenten des Geräts Lynx Series 5000 Rack Frame erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Lynx
- Bedienungsanleitungen Series 5000 Rack Frame
- Produktkarten Lynx
- Informationsbroschüren
- oder Energieetiketten Lynx Series 5000 Rack Frame
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Lynx Series 5000 Rack Frame.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Lynx Series 5000 Rack Frame, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Lynx Series 5000 Rack Frame. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Lynx Series 5000 Rack Frame ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Lynx Series 5000 Rack Frame, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Lynx Series 5000 Rack Frame hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Lynx Series 5000 Rack Frame verständlich ist.

Eine gänzliche Bedienungsanleitung von Lynx sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Lynx Series 5000 Rack Frame bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Lynx Series 5000 Rack Frame befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Lynx Series 5000 Rack Frame, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Lynx Series 5000 Rack Frame - die uns die ersten Schritte während der Nutzung von Lynx Series 5000 Rack Frame erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Lynx Series 5000 Rack Frame hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Lynx Series 5000 Rack Frame im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Lynx Series 5000 Rack Frame?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Lynx Series 5000 Rack Frame nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Lynx Series 5000 Rack Frame hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)