-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 1
BiP AC 5210S Dual-Port ADSL2+ Modem/Router User ’ s Manual ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 2
Chapter 1 ................................................................................................ 1 1.1 Introducing the BiP AC 5210S ................................................ 1 1.2 Features of the BiP AC 5210S ................................................ 3 Chapter 2 ............................................................... ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 3
Chapter 1 Introduction the BiPAC 5210S 1.1 Introducing the BiP AC 5210S Welcome to the BiP AC 5210S. Y our router is an “all-in-one” unit, combining an ADSL modem, ADSL router and Ethernet network switch, providing everything you need to get the machines on your network connected to the In ternet over your ADSL broadband connection. The BiP AC ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 4
the services that outside users can access. For example, to ensure that games and other Internet applications will run properly , user can open some specif ic port s for outside users to access internal services in network. Integrated DHCP (Dynamic Host C ontrol Protocol) services, clie nt and server , allow multiple users to get their IP addresses ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 5
1.2 Features of the BiP AC 5210S ADSL Multi-Mode St andard supports downstream rates of up to 24 Mbp s and upstream rates of up to 1 Mbp s. It also supports rate management that allows ADSL subscribers to select an Internet access speed suiting their needs and budgets. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2; G .dmt(G .992.1) ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 6
Supports simple firewall with NA T technology and provides option for blocking access from Internet, like T elnet, FTP , TFTP , WEB, SNMP and IGMP . Domain Name System (DNS) relay Provides an easy way to map the domain nam e (a friendly name for users such as www .yahoo.com) and IP address. When a local machine set s its DNS server wi th this route ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 7
RIP1/2 Routing Supports RIP1/2 routing protoc ol for routing cap ability . Simple Netw ork Management Protocol (SNMP) It is an easy way to remotely manage the router via SNMP . Web based GUI Supports web based GUI for configurati on and management. It is user-friendly and comes with on-line help. It also supports remote management ca p ability for ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 8
Chapter 2 Installing the BiPAC 5210S 2.1 Import ant note for using the BiP AC 5210S War n in g Do not use the BiP AC 5210S in high humidity or high temperatures. Do not use the same power s ource for the BiP AC 5210S as other equipment. Do not open or repair the case yourself. If the BiP AC 5210S is too hot, turn off the power immediate ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 9
2.3 The Front LEDs LED Meaning 1 PPP : Lit steady when there is a PPPoA / PPPoE connection. 2 ADSL: Lit when successfully connected to an ADSL DSLAM (“linesync”) 3 USB: Lit when the USB port is connected to the PC and working properly 4 LAN Port : Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps. Blinking when data ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 10
2.4 The Rear Port s 6 5 4 3 1 2 Port Meaning 1 Power Sw itch Power ON/OFF switch 2 POWER Connect the supplied power adapter to this jack. 3 RESET After the device is powered on, pr ess it to reset the device or restore to factory default settings. 0-3 seconds : reset the device 6 seconds above : restore to factory default settings (this is used whe ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 11
2.5 Cabling Through USB Port The product can be used as a Network Adapter on your PC. That means you do not have to install a network adapter first on your PC before connecting the ADSL Modem/Router . Just connect the supplied USB cable to the USB por t of the ADSL2+ Modem/Router and connect the other end to the PC. Make sure that your ADSL M odem/ ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 12
Chapter 3 Basic Installation The router can be configured with your web browser . A web browser is included as a standard application in the fo llowing operating systems: Wi ndows 98/NT/2000/XP/Me, etc. The product provides a very easy and user-friendly interface for configuration. 3.1 Before Configuration PCs must have an Ethernet interface instal ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 13
Installing the USB Driver If you connect the device through USB port instead of Ethernet port, for the first time the USB cable is connected to the PC, Windows will automatically de tect the device. Follow the steps to inst all the USB driver . For Windows XP & 2000 ： 1. S tart Windows. Then insert t he inst allation CD into the CD- ROM drive ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 14
3. Then follow screen. 4. T o click the type of setup you prefer , then click Next >. 12 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 15
5. T o setup enough information of coping the program files then click Next >. 6. Please plug USB cable into ADSL USB Modem. 13 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 16
7. Then, click “Finish”. 14 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 17
For Windows 98 & Me ： 1. S t art Windows. Then insert the installation CD into the CD-ROM drive. In next window , to specify the driver directory such as “G:USB Driversetup98 Me_En_De_Fi” and to continue. 2. T o choose the setup language. ”and click “Next >”. (There are three languages that user can choose: English. German and ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 18
3. Then follow screen. 4. T o click the type of setup you prefer , then click Next >. 16 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 19
5. T o setup enough information of coping the program files. 6. Select “W ant to restart my computer now” and click OK> 17 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 20
7. Then, click “Finish”. 18 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 21
Configuring the Network Properties Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View) . In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window, click Properties . 4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select t ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 22
Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window click Properties . 4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address aut ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 23
Configuring PC in Windows 98/Me 1 .Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP ->NE2000 Compatible , or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address automatically radio button. 4. Then select the DNS Confi ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 24
Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . 3. Select the Obtain an IP address from a DHCP server radio button and click OK . If you configuring the Network Properties through USB Port, please ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 25
3.2 Factory Default Settings Before configuring your , you need to know the following default settings. Web Interface: Username: admin Password: admin LAN Device IP Settings: IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 ISP setting in W AN site: PPPoE DHCP server: DHCP server is enabled. S tart IP Address: 192.168.1.100 IP pool count s: 100 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 26
3.3 LAN and W AN Port Addresses The parameters of LAN and W AN ports are pre-se t in the factory . The default values are shown below . LAN Port W AN Port IP address 192.168.1.254 Subnet Mask 255.255.255.0 DHCP server function Enabled IP addresses for distribution to PCs 100 IP addresses continuing from 192.168.1.100 through 192.168.1.199 The PPPoE ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 27
3.5 Configuring with your W eb Browser Open your web browser , enter the IP address of your r outer , which by default is 192.168.1.254 , and click “ Go ”, a user name and password window prompt will appear . The default username and p assword are “admin” and “admin”. Congratulation! Y ou are now successfully logon to the ADSL2+ Modem/R ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 28
Chapter 4 Configuration At the configuration homepage, the left navigation p ane wher e bookmarks are provided links you directly to the desired setup page, including: Quick St art (wizard setup) Interface Setup (Internet, LAN) Advanced Setup (Firewall, Routing, NA T , ADSL) Access Management (ACL, IP Filter , SNMP , UPnP , DDNS) Maintenance (Admin ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 29
4.1 Quick S t art For detailed instructions on configuring W AN settings, see the Interface Setup section of this manual. The information you need for the Quick S tart to get you online are your login (often in the form of username@ispname ), your p assword, and the encapsulation type. The following is the Quick S tart step, please follo w accordin ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 30
Step1. Set your new p assword. Step2: Choose your time zone 28 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 31
Step3: Set your Internet connection 29 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 32
30 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 33
Step4: Rest art your ADSL Router 31 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 34
4.2 Interface Setup Click this item to access the following sub- items that configur e the ADSL router: Internet, LAN These functions are described in the following sections. 4.2.1 Internet 32 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 35
AT M V C Virtual Circuit: VPI (Virtual Path Identifier) and VC I (Virtual Channel Identifier) define a virtual circuit. 33 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 36
VPI : The valid range for the VPI is 0 to 255. Ente r the VPI assigned to you. This field may already be configured. VCI: The valid range for the VCI is 32 to 65535. Enter the VCI assigned to you. This field may already be configured. ATM QoS: Select CBR to specify fixed (always-on) bandwidth for voice or data traffic. Select UBR for applications t ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 37
Network Address Translation: Select None , Many to One or Many to Many from the drop-sown list box. Refer to the NAT chapter for more details. Dynamic Route: RIP Version: Select the RIP version from RIP-1, RIP-2B and RIP-2M. RIP Direction: Select the RIP direction from None, Both, In Only and Out Only. Multicast: IGMP (Internet Group Multicast Prot ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 38
4.2.2 LAN A Local Area Network (LAN) is a shared comm unication system to which many computers are attached and is limited to t he immediate area, usually the same building or floor of a building. Router Local IP IP Address: Enter the IP address of ADSL Router in dotted decimal notation, for example, 192.168.1.254 (factory default). IP Subnet Mask: ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 39
DHCP DHCP (Dynamic Host Configuration Protocol , RFC 2131 and RFC 2132) allows individual clients to obt ain TCP/IP configuration at start-up from a server . DHCP: If set to Enable , your BiP AC 5200 Series can assign IP addresses, an IP default gateway and DNS servers to Windows 95, Windows NT and other systems that support the DHCP client. If set ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 40
4.3 Advanced Setup 4.3.1 Firewall Y our router includes a firewall for controlling Internet access from your LAN and helping to prevent attacks from hackers. In addition to this, when using NA T (Network Address T ranslation) the router acts as a “natural” Inte rnet firewall, since all PCs on your LAN use private IP addresses that cannot be di ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 41
4.3.2 Routing If you have another router with a LAN-to-LAN connection, you may create a static routing on the router that is the gateway to Internet. #: Item number Dest IP: IP address of the destination network Mask: The destination mask address. Gateway IP: IP address of the gateway or existi ng interface that this route uses. Metric: It represen ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 42
ADD Route Destination IP Address ： This is the destination subnet IP address. IP Subnet Mask ： It is the destination IP addresses based on above destination subnet IP Gateway IP Address ： This is the gateway IP address to which packets are to be forwarded. Metric ： It represents the cost of transmission for routing purposes. The number need ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 43
4.3.3 NAT The NA T (Network Address T ranslation - NA T , RFC 1631) is the translat ion of the IP address of a host in a packet. The default setting is Dy namic NAPT . It provides dynamic Network Address T ranslation capability between LAN and multiple W AN connections, and the LAN traffic is routed to appropriate W AN connecti ons based on the des ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 44
DMZ: Disabled: As set in default setting, it disables the DMZ function. Enabled: It activates your DMZ function. DMZ Host Address: Give a st atic IP address to the DMZ Host when Enabled radio button is checked. Be aware that this IP will be exposed to the W AN/Internet. Select the Apply button to apply your changes. V irtual Server In TCP/I ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 45
The device can be configured as a virtual server so that remote users accessing services such as Web or FTP services via the public (WAN) IP address can be automatically redirected to local servers in the LA N network. Depending on the requested service (TCP/UDP port number), the device redirects t he external service r equest to the appropriate se ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 46
Rule Index: Choose the rule number . Rule Type: One-to-one: This is the mode m aps one local IP address to one gl obal IP address. Note that port numbers do not change for the One-to-one NAT mapping type. Many-to-One: This is the m ode maps multiple local IP addresses to one global IP address. This is equivalent to Many to One (i.e., PAT, port addr ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 47
Public Start IP: This is the starting Inside Public IP Address. Enter 0.0.0.0 here if you have a dynamic IP address from your ISP . Public End IP: This is the ending Inside Public IP Address. This field is N/A for One-to-one, Many-to-One and Server mapping types. Using port forwarding does have security implications, as outside users will be able t ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 48
4.3.4 ADSL ADSL Mode: The default setting is Auto Sync-UP . This mode will automatically detect your ADSL, ADSL2+, ADSL2, G .dmt, G .lite, and T1.413. But in so me area, multimode cannot detect the ADSL line code well. If it is the case, please adjust the ADSL line code to G .dmt or T1.413 first. If it still fails, please tr y the other values such ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 49
4.4 Access Management 4.4.1 ACL Access Control Listing allows you to determine which services/protocols can access which BiP AC 5200 Series interface from which computers. Y ou can configure the router for remote T elnet access or upload and download router firmware and configuration files using FTP . T o us e this feature, your computer must have ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 50
4.4.2 IP Filter Y ou may use telnet or Web to remotely manage the ADSL Router . User just needs to enable T elnet or W eb and give it an IP address that want to access t he ADSL Router . The default IP 0.0.0.0 allows any client to use this service to remotely manage the ADSL Router . IP Filter Set Editing IP filter Set Index: This is item number In ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 51
IP Filter Rule Index: This is item number Active: Select Yes from the drop down list box to enable IP filter rule. Source IP Address: The source IP address or range of packet s to be monitored. Subnet Mask: It is the destination IP addresses based on above destination subnet IP Source Port Number: This Port or Port Ranges defines the port allowed t ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 52
4.4.3 SNMP Simple Network Management Protocol (SNM P) is a protocol used for exchanging management information between network devices. SNMP is a member of the TCP/IP protocol suite. BiP AC 5200 series supports SNMP agent functionality which allows a manager station to manage and monitor the router through the network. Get Community: T ype the Get ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 53
4.4.4 UPnP UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with control and data transfer between devices. UPnP of fers many advantages for users running NA T routers through UPnP NA T T rav ersal, and on supported systems makes tasks such as port forwarding much easier by letti ng the application control the ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 54
4.4.5 DDNS The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing users whose ISP does not assign them a static IP address to use a domain name. This is especially useful for hosting servers via your ADSL connection, so that anyone wishing to connect to you may use your domai n name, rather than having to u ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 55
4.5 Maintenance 4.5.1 Administrator In factory setting, the default password is admin , and that for user is also p assword. Y ou can change the default password to ensure that someone cannot adjust your settings without your permission. Every time you change your password, please record the p assword and keep it at a safe place. New Passw ord: Typ ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 56
4.5.2 Time Zone The router does not have a real time clock on board; instead, it uses the Simple Network T ime Protocol (SNTP) to get the current time from an SNTP server out side your network. Choose your local time zone. After a successful connection to the Internet, the router will retrieve the correct local time from the SNTP server you have sp ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 57
4.5.3 Firmware Y our router ’s “firmware” is the software t hat allows it to operate and provides all its functionality . Think of your r outer as a dedicated computer , and the firmware as the sof twar e it runs. Over time this soft ware may be improved and modified, and your router allows you to upgrade the software it runs to t ake advanta ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 58
4.5.4 SysRestart Click SysRest art with option Current Settings to reboot your router (and restore your last saved configuration). If you wish to restart the rout er using the factory default se ttings (for example, af ter a firmware upgrade or if you have saved an incorrect configuration), select Factory Default Settings to reset to factory defaul ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 59
4.5.6 Diagnostics The Diagnostic T est p age shows t he test results for the connectivi ty of the physical lay er and protocol layer for both LAN and W AN sides 57 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 60
4.6 S t atus 4.6.1 Device Info Device Information Firmware version: This is the Firmware version MAC Address: This is the MAC Address LAN IP Address: LAN port IP address. Sub Net Mask: LAN port IP subnet mask. DHCP Server: LAN port DHCP role - Enabled, Relay or disabled 58 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 61
WA N Stat us : “Not connected” or “Connected” Virtual Circuit: There are eight groups of PVC can be defined. VPI: The valid range for the VPI is 0 to 255 VCI: The valid range for the VCI is 32 to 65535 Connection T ype: Name of the W AN connection. VPI/VCI: Vi rtual Path Identifier and Virtual Channel Identifier IP Address: W AN port IP add ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 62
4.6.2 System Log Display system logs accumulated up to the pres ent time. Y ou can trace historical information with this function. 60 ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 63
4.6.3 Statistics Read-only information here includes port status and p acket specific statistics. Also provi ded are "T ransmit S tatistics" and "Receive S tatistics". Ethernet Interface: This field displays the type of port Transmit Frames: This field displays the number of frames transmitted in the last second. Transmit Multic ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 64
ADSL T ransmit tot al PDUs: This field displays the number of total PDU transmitted in the last second. T ransmit tot al Error Count s: This field displays the number of total error transmitted in the last second. Receive total PDUs: This field displays the number of total PDU received in the last second. Receive total Error Count s: This field dis ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 65
Chapter 5 Troubleshooting If the ADSL2+ Router is not f unctioning properly , you can refer fi rst to this chapter for sim ple troubleshooting before contacting y our service provider . This could save your time and effort but if the symptoms persist, then consult your service provider . Problems starting up the router Problem Corrective Action Non ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 66
Frequent loss of ADSL linesy nc (disconnections). Ensure that all other devices connected to the same telephone line as your router (e.g. telephones, fax machines, analogue modems) have a line f ilter connected between them and the wall socket (unless you are using a Central S plitter or Central Filter installed by a qualified and licensed electric ...
-
Billion Electric Company Dual-Port ADSL2+ Modem/Router - page 67
APPENDIX Product Support and Contact Information Most problems can be solved by referring to the T roubleshooting section in the User ’s Manual . If you cannot resolve the problem with the T roubleshooting chapter , please contact the dealer where you purchased this product. Cont act Billion AUSTRALIA http://www .billion.com.au ©2006 Billion Ele ...
Haben Sie eine Frage bezüglich Billion Electric Company Dual-Port ADSL2+ Modem/Router?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Billion Electric Company Dual-Port ADSL2+ Modem/Router nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Billion Electric Company Dual-Port ADSL2+ Modem/Router hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.