Bedienungsanleitung Brother S-7200A

29 Seiten 1.3 mb
Download

Zur Seite of 29

Summary
  • Brother S-7200A - page 1

    S-7200A SINGLE NEEDLE DIRECT DRIVE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER Please read this manual before using the machine. The basic operation manual describes basic operations including sewing machine operations. For cleaning, standard adjustment s and more det ails, please refer to the instruction manual contained in the Document CD. 1. SAFE ...

  • Brother S-7200A - page 2

    ...

  • Brother S-7200A - page 3

    S-7200A 1. SAFETY INSTRUCTIONS 1 Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions below and the explanations given in the instruction manual. With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving parts such as the needle ...

  • Brother S-7200A - page 4

    S-7200A 1. SAFETY INSTRUCTIONS 2 1-2. Notes on safety DANGER Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the face plate of the control box. Touching areas where high voltages are present can result in severe injury. CAUTION Environmental requirements Use the sewing ...

  • Brother S-7200A - page 5

    S-7200A 1. SAFETY INSTRUCTIONS 3 CAUTION Sewing This sewing machine should only be used by operators who have received the necessary training in safe use beforehand. The sewing machine should not be used for any applications other than sewing. Be sure to wear protective goggles when using the machine. If goggles are not worn, there is the danger th ...

  • Brother S-7200A - page 6

    S-7200A 1. SAFETY INSTRUCTIONS 4 1-3. Warning labels The following warning labels appear on the sewing machine. Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are difficult to read, please contact your nearest Brother dealer. 1 2 3 Be sure to connect the ground. If the ground con ...

  • Brother S-7200A - page 7

    S-7200A 2. CONVENIENT FUNCTION FOR SMOOTH SEWING 5 2. CONVENIENT FUNCTION FOR SMOOTH SEWING Notification given when greasing is required INSTRUCTION MANUAL CD 11-2. Applying grease Lower thread counter Selectable starting speed INSTRUCTION MANUAL CD 5-6. Using the lower thread counter The graphic display lights and a buzzer sounds before the bobbin ...

  • Brother S-7200A - page 8

    S-7200A 3. NAMES OF MAJOR PARTS 6 3. NAMES OF MAJOR P ARTS (1) Bobbin winder (2) Thread wiper (-4[][] specifications) (3) Lifting lever (4) Quick reverse (Actuator) (5) Presser foot (6) Control box (7) Control box panel (8) Knee lifter assembly (9) Power switch (10) Oil gauge window (-[]0[], []3[] specifications) (11) Reverse lever (12) Stitch leng ...

  • Brother S-7200A - page 9

    S-7200A 4. INSTALLATION 7 4. INST ALLA TION CAUTION Machine installation should only be carried out by a qualified technician. Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine weighs more than 44 kg. The installation should be carried out by two or more people. Do not connec ...

  • Brother S-7200A - page 10

    S-7200A 4. INSTALLATION 8 4-1. Table processing diagram  The top of the table should be 40 mm in thickness and should be strong enough to hold the weight and with-stand the vibration of the sewing machine.  Drill holes as indicated in the illustration below. 4-2. Installation 1 . Control box (1) Control box (2) Bolts [3 pcs] (3) Nuts [3 pcs] ...

  • Brother S-7200A - page 11

    S-7200A 4. INSTALLATION 9 3 . Power switch (1) Power switch (2) Screws [2 pcs] 4 . Oil pan (1) Head cushions (left) [2 pcs] (2) Head cushions (right) [2 pcs] (3) Oil pan 5 . Rubber cushions (1) Rubber cushions [2 pcs] (2) Nails [4 pcs] 6 . Knee lifter complying bar (3) Knee lifter complying bar 2092M 2093M Operato r 2094M ...

  • Brother S-7200A - page 12

    S-7200A 4. INSTALLATION 10 7 . Machine head (1) Hinges [2 pcs] (2) Machine head (3) Head rest NOTE: Tap the head rest (3) securely into the table hole. If the head rest (3) is not pushed in as far as it will go, the machine head will not be sufficiently stable when it is tilted back. 8 . Operation panel (1) Operation panel (2) Screws [2 pcs] (Use f ...

  • Brother S-7200A - page 13

    S-7200A 4. INSTALLATION 11 1 1 . Knee lifter plate (1) Knee lifter plate (2) Bolt * Loosen the bolt (3) and move the knee lifter plate (1) to a position where it is easy to use. <Knee lifter adjustment> 1. Turn the machine pulley so that the feed dog is below the top of the needle plate. 2. Lower the presser foot (5) by using the lifting leve ...

  • Brother S-7200A - page 14

    S-7200A 4. INSTALLATION 12 4-3. Lubrication (-[]0[], []3[] specifications) * If the sewing machine is –[]5[] specifications, it is a complete dry type machine, and so no lubrication is necessary. CAUTION Do not connect the power cord until lubrication has been completed, otherwise the machine may operate if the treadle is depressed by mistake, wh ...

  • Brother S-7200A - page 15

    S-7200A 4. INSTALLATION 13 4-4. Connecting the cords DANGER Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the face plate of the control box. Touching areas where high voltages are present can result in severe injury. CAUTION Contact your Brother dealer or a qualified ...

  • Brother S-7200A - page 16

    S-7200A 4. INSTALLATION 14 (1) 7-pin head detector unit connector (2) 10-pin operating panel connector (3) 14-pin encoder connector (4) 14-pin machine connector Refer to the following page for the 4-pin motor connector. 2. Binding the cords (1) Repeat cable tie (2) Wire clip NOTE:  Bind the cords in such a way that the connector does not get pul ...

  • Brother S-7200A - page 17

    S-7200A 4. INSTALLATION 15 3 . Other cords (1) 6-pin power supply connector (2) 4-pin motor connector (3) Wire clip (4) Power cord <For single-phase specifications> Insert the power cord plug (5) into a wall outlet. <For three-phase specifications> 1. Attach an appropriate plug to the power cord (4). (The green and yellow wire is the gr ...

  • Brother S-7200A - page 18

    S-7200A 4. INSTALLATION 16 4-5. Test operation (Operating the treadle) CAUTION Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. <Turning on the power> Press the ON power switch (1). The power indicator (2) will illuminate. NOTE: When tur ...

  • Brother S-7200A - page 19

    S-7200A 5. PREPARATION BEFORE SEWING 17 5. PREP ARA TION BEFORE SEWING 5-1. Installing the needle CAUTION Turn off the power switch before installing the needle. The machine may operate if the treadle is depressed by mistake, which could result in injury. 1. Turn the machine pulley to move the needle bar to its highest position. 2. Loosen the screw ...

  • Brother S-7200A - page 20

    S-7200A 5. PREPARATION BEFORE SEWING 18 2126M 5-3. Winding the lower thread CAUTION Do not touch any of the moving parts or press any objects against the machine while winding the lower thread, as this may result in personal injury or damage to the machine. 1. Turn on the power switch. 2. Place the bobbin (1) onto the bobbin winder shaft (2). 3. Wi ...

  • Brother S-7200A - page 21

    S-7200A 5. PREPARATION BEFORE SEWING 19 2128M 5-5. Threading the upper thread CAUTION Turn off the power switch before threading the upper thread. The machine may operate if the treadle is depressed by mistake, which could result in injury. Turn the machine pulley and raise the thread take-up (1) before threading the upper thread. This will make th ...

  • Brother S-7200A - page 22

    S-7200A 6. USING THE OPERATION PANEL (BASIC OPERATIONS) 20 6. USING THE OPERA TION P ANEL (BASIC OPERA TIONS) 6-1. Names and functions • The operation panel keys cannot be operated while sewing is in progress. Select the keys and set the number of stitches before starting sewing. • In the case of keys with indicators, the indicator illuminates ...

  • Brother S-7200A - page 23

    S-7200A 6. USING THE OPERATION PANEL (BASIC OPERATIONS) 21 (6) Fixed stitch key When this key is pressed so that the indicator illuminates, the number of stitches (1 − 1999) in the E stitch number display is sewn, and then the sewing machine stops automatically. (7) Name label key When this key is pressed so that the indicator illuminates, fixed ...

  • Brother S-7200A - page 24

    S-7200A 6. USING THE OPERATION PANEL (BASIC OPERATIONS) 22 6-2. Sewing start and end backtack stitches 1 Setting start backtack stitches 2 Setting end backtack stitches 3 Start backtacking is carried out. After it has finished, normal sewing continues for as long as the treadle remains depressed. NOTE: If the treadle is returned to the neutral posi ...

  • Brother S-7200A - page 25

    S-7200A 7. USING THE CONTROL BOX PANEL (BASIC OPERATIONS) 23 7. USING THE CONTROL BOX P ANEL (BASIC OPERA TIONS) NOTE The control box panel will not operate when the machine head operation panel is connected. 7-1. Names and functions The power indicator illuminates when the power switch is turned on. (1) Speed control • This lets you adjust the s ...

  • Brother S-7200A - page 26

    S-7200A 7. USING THE CONTROL BOX PANEL (BASIC OPERATIONS) 24 7-2. Sewing start and end backtack stitches <Stitch number setting method> 1 While pressing the start backtack key (1), press the power switch (2) to turn on the power. 2 Start backtack setting (A) 1. Press the start backtack key (1) so that "A" is displayed in the top row ...

  • Brother S-7200A - page 27

    S-7200A 7. USING THE CONTROL BOX PANEL (BASIC OPERATIONS) 25 <Start and end backtack sewing method> 1 Press the power switch (1) to turn on the power. 2 1. Press the start backtack key (2) so that the start backtack indicator (3) illuminates. 2. Press the end backtack key (4) so that the end backtack indicator (5) illuminates. 3 Start backtac ...

  • Brother S-7200A - page 28

    S-7200A 8. SEWING 26 8. SEWING CAUTION Attach all safety devices before using the sewing machine. If the machine is used without these devices attached, injury may result. Turn off the power switch at the following times. The machine may operate if the treadle is depressed by mistake, which could result in injury.  When threading the needle  ...

  • Brother S-7200A - page 29

    For cleaning, standard adjustments and more details, please refer to the instruction manual contained in the Document CD. Contents of the Document CD The following documents are contained in PDF format. ・ Basic Operation Manual ・ Instruction Manual ・ Parts Book How to use the Document CD Refer to “Using Document CD” which comes with the D ...

Produzent Brother Kategorie Sewing Machine

Dokumente, die wir vom Produzenten des Geräts Brother S-7200A erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Brother
- Bedienungsanleitungen S-7200A
- Produktkarten Brother
- Informationsbroschüren
- oder Energieetiketten Brother S-7200A
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Brother S-7200A.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Brother S-7200A, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Brother S-7200A. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Brother S-7200A ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Brother S-7200A, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Brother S-7200A hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Brother S-7200A verständlich ist.

Eine gänzliche Bedienungsanleitung von Brother sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Brother S-7200A bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Brother S-7200A befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Brother S-7200A, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Brother S-7200A - die uns die ersten Schritte während der Nutzung von Brother S-7200A erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Brother S-7200A hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Brother S-7200A im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Brother S-7200A?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Brother S-7200A nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Brother S-7200A hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)