Bedienungsanleitung Paradyne 5620

20 Seiten 0.24 mb
Download

Zur Seite of 20

Summary
  • Paradyne 5620 - page 1

    TM 1 Hotwire  5620 RTU Customer Premises Installation Instructions Document Number 5620-A2-GN1 1-10 June 1999 Before Y ou Begin The Hotwire  5620 RTU (Remote T ermination Unit) interoperates with the Hotwire 8510 DSL Card in the DSLAM (Digital Subscriber Line Access Multiplexer) system. An optional POTS (Plain Old T elephone Service) splitter ...

  • Paradyne 5620 - page 2

    2 Package Checklist V erify that your package contains the following: - Model 5620 Remote T ermination Unit (RTU) - DSL interface cable with RJ1 1 connectors - Power cord with power transformer Refer to Cables & Connectors, page 14, for standard pin numbers. Be sure to register your warranty at www .paradyne.com . Select Service & Support ? ...

  • Paradyne 5620 - page 3

    3 97-15346-02 Punchdown Block or NID DSL Jack RTU New Wiring Connections Existing Wiring (POTS) Customer Premises (CP) DSL Ethernet Crossover Cable Ethernet Cable or Central Office (CO) Demarcation Point Local Loop Hub CP POTS Splitter DSL – Digital Subscriber Line POTS – Plain Old T elephone Service NID – Network Interface Device R TU – Re ...

  • Paradyne 5620 - page 4

    4 DSL Access without a POTS Splitter When the Hotwire 5620 RTU is installed without a POTS splitter , a second telephone wiring pair is needed for DSL access. 97-15345-02 Punchdown Block or NID DSL Jack RTU Customer Premises (CP) POTS DSL Ethernet Crossover Cable Ethernet Cable or Central Office (CO) Demarcation Point Local Loop Hub New Wiring Conn ...

  • Paradyne 5620 - page 5

    5 Installing the DSL Access Wiring The local loop terminates at the punchdown block or NID. Wiring must be connected from the customer premises side of the punchdown block or the NID to an RJ1 1 jack. T ypically , the punchdown block is installed in commercial locations and the NID is installed in residential locations.  Procedur e 1. Access the ...

  • Paradyne 5620 - page 6

    6 3. Locate the DSL pair of T1/R1 connectors on the customer premises side of the NID or punchdown block. Attach the wiring that will be connected to the DSL jack. In the following example, a NID is used without a POTS splitter . It includes an existing POTS line and a second pair installed for DSL access. DSL/PO TS Access from Local Loop Wiring to ...

  • Paradyne 5620 - page 7

    97-15300a RJ11 W all Jack or 7 The Hotwire 5620 RTU connects to the local loop via wiring from the demarcation point to an RJ1 1 wall jack. The DSL twisted-pair wiring from the local loop terminates at a new or existing wall jack. It may be necessary to install a standard single RJ1 1 jack or replace a single jack with a double RJ1 1 jack. 97-15343 ...

  • Paradyne 5620 - page 8

    8 Installing the Hotwire 5620 R TU Place the Hotwire 5620 RTU on a flat surface with clearance for the rear connectors.  Procedur e 1. Use the supplied RJ1 1 6-pin cable for the DSL connection. Insert one end of the cable into the jack labeled DSL. Insert the other end into the wall jack labeled DSL. 97-15300-01 DSL Jack POWER ETHERNET DSL Hotwi ...

  • Paradyne 5620 - page 9

    9 2. Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the cable into the jack labeled ETHERNET .  Use a straight-through cable and connect the other end to an Ethernet hub, or 97-15303-01 Ethernet Hub Ethernet Line PO WER ETHERNET DSL Hotwire RTU Ethernet Cable  Use an Ethernet crossover cable and connect the other e ...

  • Paradyne 5620 - page 10

    10 3. Insert the power cord’s round end into the jack labeled POWER. Plug the transformer into an ac outlet. 98-15836 PO WER ETHERNET DSL Hotwire RTU Po w e r Jack or T ransformer or The RTU hardware installation is now complete. When the power cord is installed, the RTU goes through a power-on self-test. Power -On When power is applied, the RTU ...

  • Paradyne 5620 - page 11

    11 Optional R TU W all Placement The Hotwire 5620 RTU is designed for tabletop placement. The R TU can also be mounted on a wall. T o mount an RTU, you will need: - Three slotted-head #6 self-threading screws with molly bolts - Drill and 3/16 ″ drill bit for the molly bolts - Screwdriver A template with the dimensions for the three screws is prov ...

  • Paradyne 5620 - page 12

    12 R TU Hardwar e T emplate F ront (LEDs) 98-16171 5.43" 7.55" T o Bottom Hole ...

  • Paradyne 5620 - page 13

    13 Status LEDs All of the LEDs turn on and off during the power-on self-test. After a successful self-test, the LEDs should appear as indicated in BOLD in the Condition column below . LED Condition Status PWR ON RTU has power . ALM OFF ON No active alarms. An alarm condition exists. TST OFF ON No active tests. The TST LED is on during the power-on ...

  • Paradyne 5620 - page 14

    98-15304-01 6-Pin RJ11 Plug DSL Cable Pin #1 Pin #6 14 LED Symptom Action DSL and Ethernet LEDs are on and there is no data transmission. The DSL link and the Ethernet link have been established but there is no data transmission. If the problem continues, contact the NSP . Ethernet LED is off. V erify that the Ethernet 10BaseT cable is securely ins ...

  • Paradyne 5620 - page 15

    98-16055a 8-Pin Plug Ethernet Cable Pin #1 Pin #8 15  The Ethernet interface connector uses an 8-pin, non-keyed modular plug. — T o connect to an Ethernet hub, use the straight-through connection. 8-Pin Straight-Through Connection Pin # Function 1 10BaseT TX D+ 2 10BaseT TX D– 3 10BaseT RX D+ 4 & 5 Not used 6 10BaseT RX D– 7 & 8 No ...

  • Paradyne 5620 - page 16

    16 Model 5620 R TU T echnical Specifications Item Specification * Height x Width x Depth 1.43 ″ x 6.00 ″ x 8.75 ″ (3.64 cm x 15.24 cm x 22.23 cm) Weight 1 lb. 1 oz. (0.48 kg) Power Class 2 T ransformer normal service input voltage range Input: 100 V ac (+ 10%), 50 Hz; 120 V ac (+ 10%), 60 Hz; or 230 V ac (+ 10%), 50/60 Hz Output: 18 Vdc, mini ...

  • Paradyne 5620 - page 17

    17 ! Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. Slots and openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered. 3. Do ...

  • Paradyne 5620 - page 18

    18 Declaration of Conformity This Declaration of Conformity is made by Paradyne Corporation pursuant to Parts 2 and 15 of the Federal Communications Commission’s Rules. This compliance information statement pertains to the following products: T rade Name: Hotwire Model Number: 5620-A3-200 This device complies with Part 15 of the FCC Rules. Operat ...

  • Paradyne 5620 - page 19

    19  Directive 89/336/EEC – Council Directive of 3 May 1989 on the approximation of the laws of the member states relating to Electro-Magnetic Compatibility (EMC), as amended by Directive 93/68/EEC. Canada EMI W arnings ! W ARNING: T o Users of Digital Apparatus in Canada: This Class B digital apparatus meets all requirements of the Canadian in ...

  • Paradyne 5620 - page 20

    20 W arranty , Sales, Service, and T raining Information Contact your local sales representative, service representative, or distributor directly for any help needed. For additional information concerning warranty , sales, service, repair , installation, documentation, training, distributor locations, or Paradyne worldwide office locations, use one ...

Produzent Paradyne Kategorie Network Card

Dokumente, die wir vom Produzenten des Geräts Paradyne 5620 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Paradyne
- Bedienungsanleitungen 5620
- Produktkarten Paradyne
- Informationsbroschüren
- oder Energieetiketten Paradyne 5620
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Paradyne 5620.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Paradyne 5620, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Paradyne 5620. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Paradyne 5620 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Paradyne 5620, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Paradyne 5620 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Paradyne 5620 verständlich ist.

Eine gänzliche Bedienungsanleitung von Paradyne sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Paradyne 5620 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Paradyne 5620 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Paradyne 5620, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Paradyne 5620 - die uns die ersten Schritte während der Nutzung von Paradyne 5620 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Paradyne 5620 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Paradyne 5620 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Paradyne 5620?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Paradyne 5620 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Paradyne 5620 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)