Bedienungsanleitung Posiflex LS-1000

22 Seiten Betrifft nicht
Download

Zur Seite of 22

Summary
  • Posiflex LS-1000 - page 1

    FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply w ith limits for a Class A digital device pursuant to EN55022 and 47 CFR, Part 2 and subpart J of Part 15 ...

  • Posiflex LS-1000 - page 2

    FUNDAMENTAL INFORMA TION MODEL NAME : LS - 1000 CONTENT ( Besides this guide) : Fig . 1 Box content besides this g uide INSTALLATION GUIDES 1. Install the USB or RS232 interface cable onto the scanner by inserting the 8 pin RJ45 type modular plug ( Fig. 2 ) of the cable into the scanner until a firm click is heard. 2. Use the stand fixing screw to ...

  • Posiflex LS-1000 - page 3

    Description Function Scan Window Reads barcodes Object Detector Trigger and wake up scanner automatically when present ed with barcode in its range Beeper Hole Fo r beep tone indication USING THE SCANNER SCANNER INTRODUCTION Features The scanner unit is a compact and space - saving hands - free omni - directional laser scanner . It can operate in a ...

  • Posiflex LS-1000 - page 4

    Wake up scanner When the scanner enters the sleep mode, pressing this switch can wake the scanner up. The sleep mode feature can be programmed using the menu labels from the Programming Guide. NO TE: The default time - out value is set to 10 minutes after laser sl e p t , 30 minutes after motor slep t . When the scanner is in sleep mode, the LED in ...

  • Posiflex LS-1000 - page 5

    SCANNER SETUP (PROGRAMMING) In most of the cases no setup is required. The defaul t setup of the scanner makes the scanner able to detect automatically the most commonly applied bar code types as tabulated above and send the data to the host system as if they are read from an USB or RS232 keyboard . To read the disabled bar code types, t he program ...

  • Posiflex LS-1000 - page 6

    Cover unwanted codes with your hand and present the desired codes, one by one, to the scanner, the scanner beeps once as it accepts each code. When done, again present the < Enter/Exit programming mode > barcode. The scanner beeps twice, once long and once short, and the LED returns to blue. The scanner has b een programmed. Of course you may ...

  • Posiflex LS-1000 - page 7

    SCANNER OPERATION Operating the Scanner The scanner read s barcodes in omni - directional scan mode as regular practice. It can also operate in single - line mode for a better aiming on a specific barcode that is printed on a surface with more than one barcode printed closely. Single Line Scan Mode In this mode the scanner can emit a single line pa ...

  • Posiflex LS-1000 - page 8

    Sleep Mode After the scanner has been inactive for a period of time, the laser automatically turns off; then the motor will turn off and the scanner will enter the “ Sleep Mode ” , the blue status LED keeps blink ing as indication. To wake up the scanner, simply present an object close to the scan window, or press the function button. Note: The ...

  • Posiflex LS-1000 - page 9

    Beeper Indications A beeper gives audible feedback on scanner operation. Beeps Indication One bee p A barcode has been successfully decoded. Four beeps in series This indicates the scanner passed the power on self - test and is operating properly. Two beeps: low - high The scanner has entered programming mode. Two beeps: same tone Scanner has retur ...

  • Posiflex LS-1000 - page 10

    Page 10 make sure that the scanner is installed as instructed in this manual and that all cables are properly connected. If the problem remains, contact your dealer. Problem Diagnostic Tips The scanner window is dirty. Clean the scanner window as described in the Maintenance section. The presented barcode type is not enabled. Use the Programming Gu ...

  • Posiflex LS-1000 - page 11

    The software running on the POS system does not support the data format of the barcode label. Enter/Exit Programming Mode Note: Scan t h is code to enter and exit programming mode. A slightly enlarged image of this code is also printed on the last page of this section for ease of application . PROGRAMMING CODES All framed barcode names represent as ...

  • Posiflex LS-1000 - page 12

    RESET Note: The reading of the “RESET” label turns all the parameters back to default values but leaving the interface mode unchanged. It is suggested to scan also the “ Return to USB default ” or “ Return to RS232 default ” label after this for LS - 1000 scanners. Return to USB default US Keyboard Return to RS232 default Page 12 ...

  • Posiflex LS-1000 - page 13

    Message Terminator - Enter Message Terminator - H.tab Message terminator - None International Keyboard (ALT method) Page 13 ...

  • Posiflex LS-1000 - page 14

    Return to customer default Note: The reading of the label will recover all parameter back to customer default . Codabar Enable Save as customer default Codabar Disable Page 14 ...

  • Posiflex LS-1000 - page 15

    Full ASCII COD E 39 Disable Code 39 Enable Code 39 Disable Full ASCII CODE39 Enable Page 15 ...

  • Posiflex LS-1000 - page 16

    UPC/EAN/JAN Disable UPC/EAN/JAN Enable ITF 2 OF 5 Disable ITF 2 of 5 Enable Page 16 ...

  • Posiflex LS-1000 - page 17

    UPC/EAN ADD ON OFF ADD ON 5 only ADD ON 2 only ADD ON 2 or 5 Page 17 ...

  • Posiflex LS-1000 - page 18

    EAN/UPC +Add on (none mandatory) Force UPC - A to EAN - 13 format enable EAN/UPC + Add on (mandatory) Force UPC - A to EAN - 13 format disable Page 18 ...

  • Posiflex LS-1000 - page 19

    EAN - 13 Convert to ISBN/ISSN Enable EAN - 13 Convert to ISBN/ISSN Disable EAN - 128 Enable EAN - 128 Disable Page 19 ...

  • Posiflex LS-1000 - page 20

    Code 128 Enable Code 128 Disable Code 93 Enable Code 93 Disable Page 20 ...

  • Posiflex LS-1000 - page 21

    Chinese Post Code Enable Chinese Pos t Code Disable Code 32 (Italian Pharmacy Code) Enable Code 32 (Italian Pharmacy Code) Disable Page 21 ...

  • Posiflex LS-1000 - page 22

    MSI enable MSI Disable Enter/Exit Programming Mode Page 22 ...

Produzent Posiflex Kategorie Barcode readers

Dokumente, die wir vom Produzenten des Geräts Posiflex LS-1000 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Posiflex
- Bedienungsanleitungen LS-1000
- Produktkarten Posiflex
- Informationsbroschüren
- oder Energieetiketten Posiflex LS-1000
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Posiflex LS-1000.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Posiflex LS-1000, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Posiflex LS-1000. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Posiflex LS-1000 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Posiflex LS-1000, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Posiflex LS-1000 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Posiflex LS-1000 verständlich ist.

Eine gänzliche Bedienungsanleitung von Posiflex sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Posiflex LS-1000 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Posiflex LS-1000 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Posiflex LS-1000, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Posiflex LS-1000 - die uns die ersten Schritte während der Nutzung von Posiflex LS-1000 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Posiflex LS-1000 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Posiflex LS-1000 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Posiflex LS-1000?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Posiflex LS-1000 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Posiflex LS-1000 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)