Bedienungsanleitung Bryant TSTATBBN2S01-C

12 Seiten 0.07 mb
Download

Zur Seite of 12

Summary
  • Bryant TSTATBBN2S01-C - page 1

    NOTE: Read the entire instruction manual before starting the installation. This symbol → indicates a change since the last issue. SAFETY CONSIDERATIONS Read and follow manufacturer instructions carefully. Follow all local electrical codes during installation. All wiring must conform to local and national electrical codes. Improper wiring or insta ...

  • Bryant TSTATBBN2S01-C - page 2

    III. INSTALL THERMOSTAT WARNING: ELECTRICAL SHOCK HAZARD Failure to follow this warning could result in personal injury or death. Before installing thermostat, turn off all power to unit. There may be more than 1 power disconnect. 1. Turn OFF all power to unit. 2. If an existing thermostat is being replaced: a. Remove existing thermostat from wall. ...

  • Bryant TSTATBBN2S01-C - page 3

    rate. However, a limiting feature will not allow more than 6 equipment cycles per hour, regardless of setting. Values can range from 1 to 9. Factory default setting is 3. This default selection will provide optimum performance in nearly all installations. Try it first. Do not change setting unless there is evidence of need to do so. Unlike conventi ...

  • Bryant TSTATBBN2S01-C - page 4

    TO SELECT: 1. Enter configuration mode (if not already there). 2. Use up and down buttons to display Option 07. The SET icon should be off. 3. Press MODE button once. The SET icon will come on. The display now shows Option 07 setting. 4. Use up and down buttons to move between available Option 07 choices of ON or OF. Factory default is OF. 5. Press ...

  • Bryant TSTATBBN2S01-C - page 5

    6. Use up and down buttons to select another Option, or press FAN button to exit configuration mode. M. Option 19 — Equipment Present This selection informs the thermostat of the heat, cool, and fan capabilities of the installed equipment. Select number 2, 3, or 4. Default is 4. For equipment with both heat and cool capability and fan selection, ...

  • Bryant TSTATBBN2S01-C - page 6

    TABLE 2—NON-PROGRAMMABLE -C THERMOSTAT QUICK REFERENCE THERMOSTAT OUTPUT TSTAT Model Outdoor Unit Option 5 24v Hot Common Fan Heat Stage 1 Heat Stage 2 Heat Stage 3 Cool Stage 1 Cool Stage 2 Reversing Valve AC01-C AC N/A R C G W/W1 N/A N/A Y/Y2 N/A N/A HP01-C HP OFF R C G Y/Y2 W/W1 N/A Y/Y2 N/A O/W2/B HP01-C AC ON R C G W/W1 O/W2/B N/A Y/Y2 N/A N ...

  • Bryant TSTATBBN2S01-C - page 7

    Fig. 8—Two-Speed Air Conditioner with Single-Stage Furnace A04009 24 V A C HO T 24 V A C COMM HEA T ST AGE 1 COOL ST AGE 2 FA N R C G W/W1 Y/Y2 R C N/A COOL ST AGE 1 N/A OUTDOOR SENSOR CONNECTION Y1 B S1 S2 C MODEL 2S 01-C THERMOST A T SINGLE-ST AGE FURNACE TW O-SPEED AIR CONDITIONER See notes 2, 5, 8, and 11 G W R Y Y2 Y1 HUM O/W2/B Fig. 6—Sin ...

  • Bryant TSTATBBN2S01-C - page 8

    Fig. 12—Single-Speed Air Conditioner with Variable Speed (FK4D, FV, 40FK) Fan Coil R Y/Y2 R Y W/W1 W1 C MODEL AC 01-C THERMOSTAT EASY SELECT TERMINAL BOARD SINGLE-SPEED AIR CONDITIONE R J1 JUMPER J2 JUMPER See note 10 and 11 W2 Y/Y2 DH G G Y1 O C HEAT STAGE 1 24 VAC HOT C COOL STAGE 1 FAN 24 VAC COMM A98463 Fig. 10—Two-Speed Air Conditioner wit ...

  • Bryant TSTATBBN2S01-C - page 9

    Fig. 14—Two-Speed Air Conditioner with Variable-Speed (FK4D, FV4, 40FK) Fan Coil A04012 24 V OL T HOT 24 V OL T COMM FA N COOL ST AGE 2 HEA T ST AGE 1 R Y/Y2 R Y2 C C C R Y1 MODEL 2S THERMOST A T EASY SELECT TERMINAL BOARD TWO-SPEED AIR CONDITIONER J1 JUMPER REMO VE J2 JUMPER FOR HEA T ST AGING See notes 2, 4, 8, 10, and 1 1 G G Y/Y2 DH W/W1 W1 H ...

  • Bryant TSTATBBN2S01-C - page 10

    WIRING DIAGRAM NOTES: 1. Furnace must control its own second-stage heat operation via furnace control algorithm. Refer to indoor equipment Installation Instructions for proper setup. 2. See Option 5 information to convert HP and 2S thermostats to AC thermostat operation. 3. As an option, lock the furnace into low-heat operation and let O/W2/B contr ...

  • Bryant TSTATBBN2S01-C - page 11

    OPERATIONAL INFORMATION FIVE-MINUTE COMPRESSOR TIMEGUARD This timer prevents the compressor from starting unless it has been off for at least 5 minutes. It can be defeated for 1 cycle by simultaneously pressing the FAN mode button and the INCREASE TEMPERATURE button. FIFTEEN-MINUTE CYCLE TIMER This timer prevents the start of a heating or cooling c ...

  • Bryant TSTATBBN2S01-C - page 12

    A04105 NON-PROGRAMMABLE THERMOST A T CONFIGURA TION RECORD Date Owner/Operator A) Hardware Configuration Seal hole in wall. Thermostat Model No. B) Mode Settings C) Configuration Options Mode (Off , Heat, Cool, A uto , Eheat) Heating Set P oint V alue Cooling Set P oint V alue F an (Auto or On) 1 Anticipator (1-9: factory default = 3) 2 Clean Filte ...

Produzent Bryant Kategorie Thermostat

Dokumente, die wir vom Produzenten des Geräts Bryant TSTATBBN2S01-C erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Bryant
- Bedienungsanleitungen TSTATBBN2S01-C
- Produktkarten Bryant
- Informationsbroschüren
- oder Energieetiketten Bryant TSTATBBN2S01-C
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Bryant TSTATBBN2S01-C.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Bryant TSTATBBN2S01-C, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Bryant TSTATBBN2S01-C. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Bryant TSTATBBN2S01-C ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Bryant TSTATBBN2S01-C, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Bryant TSTATBBN2S01-C hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Bryant TSTATBBN2S01-C verständlich ist.

Eine gänzliche Bedienungsanleitung von Bryant sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Bryant TSTATBBN2S01-C bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Bryant TSTATBBN2S01-C befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Bryant TSTATBBN2S01-C, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Bryant TSTATBBN2S01-C - die uns die ersten Schritte während der Nutzung von Bryant TSTATBBN2S01-C erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Bryant TSTATBBN2S01-C hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Bryant TSTATBBN2S01-C im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Bryant TSTATBBN2S01-C?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Bryant TSTATBBN2S01-C nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Bryant TSTATBBN2S01-C hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)