Bedienungsanleitung Billy Goat AE401H

20 Seiten 1.27 mb
Download

Zur Seite of 20

Summary
  • Billy Goat AE401H - page 1

    Part No 360314 Form No F031708A 1 AE Owner’s Manual BILLY GOAT AERATOR Owner's Manual AE401, AE401H, AE401H5T & AE401S Replacement Parts TINE ROW KIT Complete tine row set for replacement of one complete row of tines. Includes mounting plates, spacer, and all hardware. P/N 360197 TINE KIT Individual coring tine for replacement of worn or ...

  • Billy Goat AE401H - page 2

    Part No 360314 Form No F031708A 2 AE Owner’s Manual ABOUT THIS MANUAL THANK YOU for purchasing a BILLY GOAT ® Aerator . Your new machine ha s been carefully designed and manufactured to provide years of reliab le and productive service. This manual provides complete operating and maintenance instructions t hat will help to maintain your m achine ...

  • Billy Goat AE401H - page 3

    Part No 360314 Form No F031708A 3 AE Owner’s Manual SERIAL PLATE DATA Record the model number, seri al number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications AE 40 1 AE401H AE401H5T A E401S Engine: HP 5.5 (4.1 kW) 4.0 (2.98 kW) 4.0 (2.98 kW) 4.0(2.98 Kw) Engine: Model 1273520197B1 GX120K1HX2 GX120K1HX2 EH12-2 ...

  • Billy Goat AE401H - page 4

    Part No 360314 Form No F031708A 4 AE Owner’s Manual GENERAL SAFETY INSTRUCTIO NS and SYMBOLS The safety symbols shown belo w are used throughou t this manual. You should become famili ar with them before assembling, operating, or servicing this equipm ent. This symbol indicates important information t hat will prevent injury to yourself or others ...

  • Billy Goat AE401H - page 5

    Part No 360314 Form No F031708A 5 AE Owner’s Manual DO NOT run this equipment indoors or in an y poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engi ne to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame. DO NOT remove gas cap while ...

  • Billy Goat AE401H - page 6

    Part No 360314 Form No F031708A 6 AE Owner’s Manual INTENDED USE INTENDED USE: This machine is designed for ae rating established lawns and large grass covered areas. T he machine should not be used for any ot her pu rpose than that stated above. DO NOT operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediat ...

  • Billy Goat AE401H - page 7

    Part No 360314 Form No F031708A 7 AE Owner’s Manual PACKING CHECKLIST Your Billy Goat is shipped from the factory in one cart on, completely assembled. PUT OIL IN ENGINE BEFORE STARTING ASSEMBLY READ all safety instructions before assembling u nit. TAKE CAUTION whe n removing the unit from the box. 1. HONDA AND SUBARU: Unfold the upper handle (it ...

  • Billy Goat AE401H - page 8

    Part No 360314 Form No F031708A 8 AE Owner’s Manual OPERATION Like all mechanical tools, reasonable ca re must be used wh en operating machine. Inspect machine work area and machine befor e operating. Make sure that all operators of this equipment are trained in general machine use and safe ty. PUT OIL IN ENGINE BEFORE STARTING STARTING ENGINE: S ...

  • Billy Goat AE401H - page 9

    Part No 360314 Form No F031708A 9 AE Owner’s Manual TINES RAISING/LOWERING The tines are raised or lowered into the ground by op erating the tine engagement lever on the upper handl e. Tine penetration is very dependent on surface p reparation. READ the entire operation secti on before aerating. AERATING OPERATION MOW: Mow the lawn to its normal ...

  • Billy Goat AE401H - page 10

    Part No 360314 Form No F031708A 10 AE Owner’s Manual ENGAGE TINES: With the aerator in the work area, relea se the clutch bail and push forward on the tine engagement lever, lowering the tines int o the dirt. AERATE: Engage the operators clutch bail by pushin g it pulli ng it backwards from the handle, and start aerating. NOTE: For maximum tine p ...

  • Billy Goat AE401H - page 11

    Part No 360314 Form No F031708A 11 AE Owner’s Manual MAINTENANCE P ERIODIC M AINTENANCE Periodic maintenance should be perfo rmed at the following intervals: Maintenance Operation Every Use (daily) Every 25 hrs Every 50 Hours Inspect for loose, worn or damaged parts. z Check engine oil. z Inspect belt for wear. z Engine (See Engine Manual) Oil ch ...

  • Billy Goat AE401H - page 12

    Part No 360314 Form No F031708A 12 AE Owner’s Manual INDIVIDUAL TINES REPLACEMENT 1. Wait for engine to cool and discon nect spark plug. 2. Loosen but do not remove the outermost nut and carri age bolt that secure the damaged or worn tine. 3. Loosen and remove the innermost nut and ca rriage bolt that hold the tine in the reel. 4. Use a small pry ...

  • Billy Goat AE401H - page 13

    Part No 360314 Form No F031708A 13 AE Owner’s Manual DRIVE BELT REPLACEMENT 1 . Wait for engine to cool and discon nect spark plug. 2. Remove the top guard by removing the four nut s, two on each side, that secure it to the frame. 3. Slide the belt off of the engine drive pulle y, and off of the jackshaft drive pulley. 4. Continue sliding the bel ...

  • Billy Goat AE401H - page 14

    Part No 360314 Form No F031708A 14 AE Owner’s Manual Troubleshooting When servicing the engine refer to specific manufa cturers engine owner's manual. All engine warranty is covered by the specific engine manufacturer. If your engine requi res warranty or other repair work contact your local servicing engine dealer. When contacting a deal er ...

  • Billy Goat AE401H - page 15

    Part No 360314 Form No F031708A 15 AE Owner’s Manual MAINTENANCE RECORD Date Service Performed ...

  • Billy Goat AE401H - page 16

    Part No 360314 Form No F031708A 16 AE Owner’s Manual PARTS DRAWING AE ...

  • Billy Goat AE401H - page 17

    Part No 360314 Form No F031708A 17 AE Owner’s Manual PARTS LIST AE ITEM A E401 A E401H5T A E401H AE401S NO. Part No . Part No. Par t No. Part No. 2 W ATER TANK 5.5 GAL 360238 1 360238 1 360238 1 360238 1 3 GUA RD DRIV E COVER 3 60 28 0 1 360 280 1 3 60 28 0 1 360305 1 9 W ASHER 5/16 FENDER 8172020 5 8172020 5 8172020 5 81 72020 5 16 NUT LOCK 3/8- ...

  • Billy Goat AE401H - page 18

    Part No 360314 Form No F031708A 18 AE Owner’s Manual PARTS DRAWING AE ...

  • Billy Goat AE401H - page 19

    Part No 360314 Form No F031708A 19 AE Owner’s Manual PARTS LIST AE 44 SCREW CAP 3 /8 -16 x1 8041050 2 8041050 2 8041050 2 8 04 1050 2 49 FLAT W ASHE R 1/2 " 8171006 4 8171006 4 8171006 4 8 171006 4 50 NUT LOCK 5/16-18 8160002 55 8160002 68 8160002 55 8160002 55 55 CABLE CLUTCH ASSY 360313 1 360313 1 36 0313 1 360313 1 59 SP ACER TI NE SP ROC ...

  • Billy Goat AE401H - page 20

    Part No 360314 Form No F031708A 20 AE Owner’s Manual If you liked this product please feel free to view our full line of quality lawn care, renovation, and debris removal products at www.billygoat.com FINISH MOWER BRUSH CUTTER FORCE BLOWER QL VACUUM MULTI VACUUM POWER RAKE ...

Produzent Billy Goat Kategorie Lawn Aerator

Dokumente, die wir vom Produzenten des Geräts Billy Goat AE401H erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Billy Goat
- Bedienungsanleitungen AE401H
- Produktkarten Billy Goat
- Informationsbroschüren
- oder Energieetiketten Billy Goat AE401H
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Billy Goat AE401H.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Billy Goat AE401H, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Billy Goat AE401H. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Billy Goat AE401H ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Billy Goat AE401H, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Billy Goat AE401H hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Billy Goat AE401H verständlich ist.

Eine gänzliche Bedienungsanleitung von Billy Goat sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Billy Goat AE401H bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Billy Goat AE401H befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Billy Goat AE401H, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Billy Goat AE401H - die uns die ersten Schritte während der Nutzung von Billy Goat AE401H erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Billy Goat AE401H hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Billy Goat AE401H im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Billy Goat AE401H?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Billy Goat AE401H nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Billy Goat AE401H hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)