Bedienungsanleitung IOGear GHPB01

74 Seiten 1.49 mb
Download

Zur Seite of 74

Summary
  • IOGear GHPB01 - page 1

    HomePlug to Ethernet Bridge User Manual (GHPB01) ...

  • IOGear GHPB01 - page 2

    ...

  • IOGear GHPB01 - page 3

    Thank you for purchasing one of the most user-friendly networking devices on the market. IOGEAR’s HomePlug to Ethernet Bridges are first-class networking devices designed to network your computers at home (or in your small office). This device allows you to set up your home network via the most pervasive medium in your house – the home power li ...

  • IOGear GHPB01 - page 4

    Table of Contents Overview Features Requirements Introduction Installation Network Configuration Networking Basics - Network Setup Wizard - Checking IP Address - Assign a Static IP address - Sharing Disks/Folders - Sharing Printers - Accessing the Internet Troubleshooting 02 03 04 05 07 14 27 27 38 40 43 48 59 63 Technical Support Product Specifica ...

  • IOGear GHPB01 - page 5

    Overview IOGEAR's HomePlug Powerline Network Ethernet Bridge allows you to network your home comput- ers through the electric power lines in the house. Setting up a home network has never been so simple, just connect your computer to the HomePlug Bridge via the CAT5 patch cable provided in the package, and then plug the power end to your AC po ...

  • IOGear GHPB01 - page 6

    Features • No extra wires, using the most pervasive medium in your home - power lines • Allows multiple computers to share Internet access, printers, and other resources through the power lines • Very easy and intuitive to set up and install • HomePlug Powerline Specification 1.0 compliant • Up to 14 Mbps bandwidth • Up to 990' dis ...

  • IOGear GHPB01 - page 7

    • Available AC power outlets in the room. • Standard home power line wiring. • Computers with 10/100Base-T adapters, or 10/100Base-T switch/hub. • When used as a node: Windows 98SE, ME, 2000, XP. • When used as a bridge: any operating system (OS transparent). Requirements 4 System Requirements ...

  • IOGear GHPB01 - page 8

    IOGEAR's HomePlug to Ethernet Bridge allows you to network your computers via your existing home power lines. It offers a data transmission speed of up to 14 Mbps, and reaches up to 990 feet through standard power lines. Package contents: 1. HomePlug to Ethernet Bridge 2. CAT5 patch cable 3. Power cable 4. User Manual 5. Warranty Registration ...

  • IOGear GHPB01 - page 9

    Introduction 6 Front View: (Drawing) 1. Power LED - lights up in green when plugged into a power outlet 2. Collision LED - lights up in green whenever there is collision 3. Link LED - lights up in green after plugged into a power outlet 4. ACT LED - blinks in green when there is network activity 5. Ethernet port - connecting to the computer 6. Norm ...

  • IOGear GHPB01 - page 10

    Installation There are several ways to network your computers using the HomePlug Bridge. Before we get started, please NOTE: Do not place HomePlug devices under direct sunlight or near high heat emitting devices; Do not place HomePlug devices near water or wet surfaces to avoid electric hazards; Do not place HomePlug devices on any moving or unstab ...

  • IOGear GHPB01 - page 11

    If you plan to use this unit as a NODE, not as a BRIDGE (refer to the Network Terms for details): 1. Remove the HomePlug Bridge, the power cord, the CAT5 cable and the installation CD from the package. 2. Allocate a space for the adapter's placement. Make sure you avoid the places mentioned on the previous page. 3. Make sure that your HomePlug ...

  • IOGear GHPB01 - page 12

    Installation 6. Read, understand and accept the License Agreement and Con- tinue by clicking Next. 9 ...

  • IOGear GHPB01 - page 13

    Installation 7. Enter a username and organiza- tion name, and continue installa- tion. (Username and Organiza- tion have no importance in device operation. This window might look slightly different on other plat- forms.) 10 ...

  • IOGear GHPB01 - page 14

    8. Click Install to start the Installa- tion Wizard: 11 Installation ...

  • IOGear GHPB01 - page 15

    9. After installation is successful, a win- dow will pop up prompting for the in- stallation of the HomePlug Bridge. Plug in the CAT5 cable, one end into the Ethernet port on the HomePlug Bridge, the other end into an available network port on your computer. Please verify that the green Power LED and Link LED on the HomePlug Bridge light up. Instal ...

  • IOGear GHPB01 - page 16

    13 Installation 10. You have reached the end of your installation. Please restart your computer for changes to go into effect. ...

  • IOGear GHPB01 - page 17

    HomePlug Node Configuration Steps: 1. After restarting your computer, you should see this icon on your desktop. Click on it to begin configuring your HomePlug device. 14 Network Configuration ...

  • IOGear GHPB01 - page 18

    2. Click Next to begin the configuration. 15 Network Configuration ...

  • IOGear GHPB01 - page 19

    3. Click Next to continue. 16 Network Configuration ...

  • IOGear GHPB01 - page 20

    4. Type in a network password between 4 and 24 characters long and click Next. The password can consist of numbers and/or letters. 17 Network Configuration ...

  • IOGear GHPB01 - page 21

    5. Click Next. 18 Network Configuration ...

  • IOGear GHPB01 - page 22

    6. Once your HomePlug Network has been configured, click Next. If other de- vices are present on the HomePlug net- work, their MAC addresses will be shown in "HomePlug Network De- vices". 19 Network Configuration ...

  • IOGear GHPB01 - page 23

    7. After the configuration is complete, click Finish. Network Configuration 20 ...

  • IOGear GHPB01 - page 24

    Network Terms What is a node? A node is any given device that resides or is connected onto an existing network. A computer with a network card connected to a switch is a node. The same thing applies to a Mac connected to a hub. What is a bridge? A bridge is used when connecting one side of the network with another network. Previously, connecting ev ...

  • IOGear GHPB01 - page 25

    22 Network Configuration You will have to use bridges to connect two Macintoshes, because the utility software is only compatible with Windows-based computers. Can I use both in the same network? Yes. It is possible to have both nodes and bridges on a network as long as there is only a maximum of 2 bridges. It is also fine to have USB nodes on the ...

  • IOGear GHPB01 - page 26

    a. Using the HomePlug to USB Adapter ONLY 23 Network Configuration ...

  • IOGear GHPB01 - page 27

    24 Network Configuration b. Using the HomePlug Ethernet Bridge (Node Mode) (Several HomePlug Bridges can be used) ...

  • IOGear GHPB01 - page 28

    25 Network Configuration c. Using the HomePlug USB Adapter AND Ethernet Bridge (Node Mode) ...

  • IOGear GHPB01 - page 29

    d. Using the HomePlug Ethernet bridge to make a sub network HomePlug ready to communicate with the other HomePlug nodes. (Only 2 Homeplug Bridges can be used.) 26 Network Configuration ...

  • IOGear GHPB01 - page 30

    Prior to installing HomePlug, you may have had some ideas about using your new network. This section will help you get started on those ideas or even give you some new ones. It will go through the process of sharing files, printing from any computer on the network, or accessing the Internet on multiple computers with one connection. Please note tha ...

  • IOGear GHPB01 - page 31

    Click "Next" in the window(right) for the Network Setup Wizard. 28 Networking Basics ...

  • IOGear GHPB01 - page 32

    Read and follow the instructions in the following window and then click "Next". 29 Networking Basics ...

  • IOGear GHPB01 - page 33

    In the following window, select among the 3 options which best describe this computer and then click "Next". If your computer connects to a broadband router/ gateway, select the second option. 30 Networking Basics ...

  • IOGear GHPB01 - page 34

    Fill in the information in the following window as you desire and then click "Next”. 31 Networking Basics ...

  • IOGear GHPB01 - page 35

    Enter the Workgroup name as you wish and then click "Next". (Very important: All computers on your net- work should have the same Workgroup. Networking Basics 32 ...

  • IOGear GHPB01 - page 36

    Review the setting in the following screen, and click "Next" to continue. If you want to change any settings, you need to click "Back" and start over again. 33 Networking Basics ...

  • IOGear GHPB01 - page 37

    Please wait while the Network Setup Wiz- ard applies the changes and configures the computer. 34 Networking Basics ...

  • IOGear GHPB01 - page 38

    When the configuration is done, the follow- ing screen will come up. Select one of the 4 options according to your needs. (In this example, the last choice was selected.) Click “Next.” Networking Basics 35 ...

  • IOGear GHPB01 - page 39

    Networking Basics 36 Then click "Finish" on this next window. ...

  • IOGear GHPB01 - page 40

    The new setting will take effect after you restart the computer. Click "Yes" to restart the computer. Congratulations, you have completed configuring this computer! After setting up networks on all your computers on the network, you will be able to use your HomePlug network to share files, printers, and Internet connections. Networking Ba ...

  • IOGear GHPB01 - page 41

    Topic 2: Checking IP ad- dresses in Windows XP/ 2000 Go to Start>Programs>Accessories> Command Prompt. Networking Basics 38 ...

  • IOGear GHPB01 - page 42

    Type "ipconfig" at the prompt, then press Enter. You will see the IP address of this computer. Networking Basics 39 ...

  • IOGear GHPB01 - page 43

    Topic 3: Assigning a Static IP Address (Note: If you use DHCP-capable gateway/router, you don't need to assign any static IP addresses because the gateway/router will automatically as- sign IP addresses to the computers on the net- work.) Go to Start>Settings>Control Panel>Network Connections>Local Area Connection Right click on Lo ...

  • IOGear GHPB01 - page 44

    At the following window, select "Use the following IP address:", and fill in the desired IP address and subnet mask (it is recommended to use the default subnet mask as shown in the following window. Subnet mask must be the same for all the computers on the network.) If you need to enter DNS address, you must enter the address of the defa ...

  • IOGear GHPB01 - page 45

    Click "Close" on the Local Area Connection Properties window. You have completed static IP address assignment. Networking Basics 42 ...

  • IOGear GHPB01 - page 46

    Topic 4. Sharing Disks/Folders Once the network has been checked / configured, you can access other systems via "My Network Places". To allow other systems to access data on your disks / in your folders, you have to give permission to share your disks and/or folders. 1. Select the disk (or the folder) to be shared (for example in "My ...

  • IOGear GHPB01 - page 47

    Networking Basics 44 Once you have selected the folder to be shared, right-click to select “sharing and secu- rity.” ...

  • IOGear GHPB01 - page 48

    Networking Basics 45 2. In the following window, click to select "Share this folder". Then click on "Permission". ...

  • IOGear GHPB01 - page 49

    Networking Basics 3. Please note that by default, all users defined on your XP Professional system will have full permissions. You can reduce the permissions (for example to allow only Read-access) and/or you could add a different group of users to have access permission (but then you should delete the group "Everyone" from this list). In ...

  • IOGear GHPB01 - page 50

    Networking Basics 4. Click OK on the original Sharing and Security window to conclude the process. 5. Once a disk or folder is shared, the icon will show it via the "holding hand.” 47 ...

  • IOGear GHPB01 - page 51

    Networking Basics 48 Topic 5. Share Printers You may now share any installed printers connected to this computer with other computers on your net- work. 1. Using the computer that has the printer already connected to it, go to: Start > Control Panel > Print- ers and Faxes. Click on the printer you want to share with others on the network and ...

  • IOGear GHPB01 - page 52

    2. In the following window, click on "Share this Printer" and type in the share name you would like. After this is done, click on "Ap- ply" and then "OK". Networking Basics 49 ...

  • IOGear GHPB01 - page 53

    Networking Basics 50 Now when you go to "Print- ers and Faxes" in the Control Panel, you will see the supporting hand under- neath the printer, which means that the printer is being shared in the net- work. ...

  • IOGear GHPB01 - page 54

    Networking Basics For a computer to access a Network Printer, the device driver or software for that printer must be installed and pointed to the proper location of the printer. This is done similarly to the way you installed the printer on the computer it is connected to. 1. Go to a computer that is not connected to the printer and select "St ...

  • IOGear GHPB01 - page 55

    2. Click on "Add a printer". Networking Basics 54 ...

  • IOGear GHPB01 - page 56

    Networking Basics 3. Select the network printer option and click Next. 55 ...

  • IOGear GHPB01 - page 57

    4. Find the printer you would like to share and click Next. Networking Basics 56 ...

  • IOGear GHPB01 - page 58

    Networking Basics Decide if you would like to choose this printer as a default printer and click Next. 57 ...

  • IOGear GHPB01 - page 59

    You have now added the printer to your computer, click Finish. Now you may use the Network Printer as if it were directly connected to the computer. Make sure that the computer which is directly connected to the printer is on. Networking Basics 58 ...

  • IOGear GHPB01 - page 60

    Sharing Internet Access Topic 6. Sharing Internet Access So how can the Internet connection be shared among other computers on the HomePlug network? Since neither the HomePlug Bridge nor USB Adapter are capable of routing at this time, a router is necessary in order to share an Internet connection. Future versions of the HomePlug Bridge or USB Adap ...

  • IOGear GHPB01 - page 61

    HomePlug to USB Adapter or a HomePlug Bridge. Please note that only two (2) HomePlug Bridges are allowed on one network if used as bridges (without installation of the software). Please follow these steps for setting up Internet Sharing: Sharing Internet Access 60 ...

  • IOGear GHPB01 - page 62

    Sharing Internet Access a. Make sure that the DSL/Cable modem is connected to the Router (using the WAN port on the router.) b. Connect the HomePlug Bridge to the Router (using the Uplink port on the router.) c. Check the link light on the HomePlug Bridge. It must light up green. IMPORTANT: The HomePlug Bridge MUST connect to the "Uplink" ...

  • IOGear GHPB01 - page 63

    Checking Router Settings: Please make sure that the following settings on your router are set: (The setup windows will depend on the router manufacturer's software.) A) The IP should be obtained automatically; B) DHCP must be enabled; C) Release DHCP and then Renew DHCP to reset the IP Addresses. It is recom- mended that you verify that IP Add ...

  • IOGear GHPB01 - page 64

    Troubleshooting Frequently Asked Questions/Troubleshooting 1. Will HomePlug work in my house or apartment? If the house or apartment was built under U.S. building standards using copper wiring, then it will work. 2. What types of security problems will I be facing? If your house is on the same power grid as your neighbor, then there is a potential ...

  • IOGear GHPB01 - page 65

    Troubleshooting 64 4. What is the difference between bridge mode and node mode in the HomePlug Ethernet Bridge (GHPB01)? Bridge mode operates without software installation and can work with any 10/100Base-T or 10Base-T Ethernet connections. By connecting the bridge to a router, switch, or Ethernet based device (XBOX, PlayStation, Web Tablet, Pocket ...

  • IOGear GHPB01 - page 66

    conflicts with the operation of a Bridgedecor.exe file, executed on boot. To repair this problem, go into Windows Safe Mode and disable the Virtual Private Networking Adapter. You can disable the Adapter by right clicking on your Network Neighborhood Icon and click- ing on properties. This will list all adapters installed on your computer. Right cl ...

  • IOGear GHPB01 - page 67

    be on one network. If devices do not have the same encryption password, they will not be able to communicate with each other. 8. What OS does the HomePlug utility software fully support? Windows 98SE, ME, XP, and 2000. Windows NT and Mac are only supported by the HomePlug Ethernet Bridge (Without installing the HomePlug software with default operat ...

  • IOGear GHPB01 - page 68

    To help IOGEAR® customers obtain the highest level of performance from their HomePlug devices, the IOGEAR® Service Support team is available to answer your technical ques- tions. Do not hesitate to call if you are having trouble getting your device to work correctly. IOGEAR® Service Support can be reached by phone from 8am to 5pm Pacific Standar ...

  • IOGear GHPB01 - page 69

    Getting Technical Support 68 1) What is the purchase date and serial number of the product? 2) Were any messages displayed on the screen when the error occurred? If so, what was the exact wording of the message? 3) What type of Computer are you using? 4) When does the problem occur? 5) Can the problem be reproduced? If so, what are the steps necess ...

  • IOGear GHPB01 - page 70

    Product Specifications 69 ...

  • IOGear GHPB01 - page 71

    Limited Warranty 70 Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory ...

  • IOGear GHPB01 - page 72

    © 2002 IOGEAR® All Rights Reserved. PKG-M0024 IOGEAR and the IOGEAR logo are trademarks or registered trademarks of IOGEAR Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc. FireWire, MAC, Macintosh, G3, G4, iMac, Apple are registered trademarks of ...

  • IOGear GHPB01 - page 73

    ...

  • IOGear GHPB01 - page 74

    23 Hubble • Irvine, CA 92618 • (P) 949.453.8782 • (F) 949.453.8785 • www.iogear.com Contact info. ...

Produzent IOGear Kategorie Network Router

Dokumente, die wir vom Produzenten des Geräts IOGear GHPB01 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen IOGear
- Bedienungsanleitungen GHPB01
- Produktkarten IOGear
- Informationsbroschüren
- oder Energieetiketten IOGear GHPB01
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung IOGear GHPB01.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen IOGear GHPB01, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen IOGear GHPB01. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts IOGear GHPB01 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts IOGear GHPB01, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von IOGear GHPB01 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von IOGear GHPB01 verständlich ist.

Eine gänzliche Bedienungsanleitung von IOGear sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von IOGear GHPB01 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von IOGear GHPB01 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich IOGear GHPB01, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts IOGear GHPB01 - die uns die ersten Schritte während der Nutzung von IOGear GHPB01 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit IOGear GHPB01 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von IOGear GHPB01 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich IOGear GHPB01?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit IOGear GHPB01 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit IOGear GHPB01 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)