-
Stewart Filmscreen Corp CM-1005 - page 1
T O THE INST ALLER : B E SURE TO LEA VE THIS MANUAL WITH THE OWNER . VE-1005 V isionar y Electriscr een T o the Owner Installation Instructions Operating the Screen Maintenance OWNER’S MANUAL ...
-
Stewart Filmscreen Corp CM-1005 - page 2
Printed in U.S.A. ©2003 - 2005 S tewart Filmscreen Corporation S tewart Filmscreen reserves the right to make changes to the product specified in this document. From time to time, this document is updated. Current versions of documentation are posted on the S tewart Filmscreen website at www .stewartfilm.com. ...
-
Stewart Filmscreen Corp CM-1005 - page 3
Content s T o the Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparing the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 S tep 1. Hanging the Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 S tep 2. Electrical Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Stewart Filmscreen Corp CM-1005 - page 4
Congratulations on your purchase of the finest optical viewing screen available anywhere in the world! Please take a moment to review this manual, it will help ensure you many years of trouble-free service from your new S tewart Filmscreen product. About your Visionary Electriscreen The Visionary Electriscreen is designed for ease of inst allation. ...
-
Stewart Filmscreen Corp CM-1005 - page 5
Y ou will need: Enough ladders for the personnel supporting the screen during the mounting process A level Fasteners appropriate for the surface on which the screen is being mounted (See instructions for the type of mount for recommendations.) A wrench (supplied) Note: This manual refers to “AC” to represent electrical power . Y ...
-
Stewart Filmscreen Corp CM-1005 - page 6
4 S tewart Filmscreen Corporation Professional mounting techniques should be used. Stewart Filmscreen Corporation cannot be liable for subst andard or faulty installations. Follow the instructions for mounting the case first, then install the screen assembly into the case after you make the initial electrical connection to the pigtail. Make sure th ...
-
Stewart Filmscreen Corp CM-1005 - page 7
The motor requires standard AC input (unless an alternate voltage has been specified). All connections are made to the electrical box on the side of the unit (audience left). There are several switch controls available. Follow the installation procedure for the type of switch control you will install. General suggestions for wiring: Soldering i ...
-
Stewart Filmscreen Corp CM-1005 - page 8
6 S tewart Filmscreen Corporation Inst alling the high voltage switch control A st andard 3-position AC wall switch is supplied. The high-volt age control is connected to standard wall jack that is inst alled near the unit. The switch alternates directions of screen motion by means of the hot lead, using the 3- position switch. Prep aring the conne ...
-
Stewart Filmscreen Corp CM-1005 - page 9
Visionary Electriscreen: Owner’s Manual 7 Inst alling the low-voltage 3-button switch option The optional S tewart Filmscreen low-voltage control allows the use of low- voltage wire to connect to the supplied 3-position 24V moment ary wall switch. Prep aring the connection Before making the electrical connections, you need: An available AC co ...
-
Stewart Filmscreen Corp CM-1005 - page 10
8 S tewart Filmscreen Corporation Inst alling the infrared remote control option The optional S tewart Filmscreen infrared remote control allows control of the screens from anywhere in the room. Note: The distance between the hand-held remote control and the receiver can be up to 50 feet / 15 m. It is necessary to have uninterrupted line-of- sight ...
-
Stewart Filmscreen Corp CM-1005 - page 11
Connecting the Video Interface Control System (VICS) The 12V VICS enables up and down operation of the screen in conjunction with a projector , tuner , VCR, cable box, or switched AC outlet. Prep aring the connection Before making the electrical connections, you need: An available AC constant power source A 4-conductor cable (14ga) Making t ...
-
Stewart Filmscreen Corp CM-1005 - page 12
10 S tewart Filmscreen Corporation Figure 8: Wireless remote control connection Inst alling the wireless remote control option The optional S tewart Filmscreen wireless remote control allows control of the screen from anywhere in the room. Once the AC power outlet is installed near the screen, an electrician is not needed to connect the wireless re ...
-
Stewart Filmscreen Corp CM-1005 - page 13
Visionary Electriscreen: Owner’s Follow this procedure to mount the screen assembly in the case. Be sure you have performed the appropriate electrical hookup first. 1. Raise the screen assembly to the previously mounted case. 2. Insert the interlocking modular connector from the screen assembly to the corresponding connector in the case. Refer to ...
-
Stewart Filmscreen Corp CM-1005 - page 14
The method you use to raise and lower the screen depends on the type of switch control device you have selected. When you lower or retract the screen, it will stop at its preset limit. If an obstacle (such as a person or furniture) get s in the path of the screen as it is lowered, you should use the switch control to stop the screen's motion; ...
-
Stewart Filmscreen Corp CM-1005 - page 15
Visionary Electriscreen: Owner’s Manual 13 The extension and retraction limit switches have been preset at the factory . In general, we advise you to avoid readjusting these switches. In some cases, to enable proper alignment of the displayed image on the screen, you may need to adjust the extension of the screen. If adjustment to the extension i ...
-
Stewart Filmscreen Corp CM-1005 - page 16
14 S tewart Filmscreen Corporation Modifying the extension of the screen Y ou can increase the extension of the screen up to 3" (7.6 cm) past the factory preset stop, or you can decrease the extension by approximately 4-6" (10 - 15 cm) from the factory preset stop. Do not attempt to modify the screen extension beyond these recommended amo ...
-
Stewart Filmscreen Corp CM-1005 - page 17
With reasonable care, you may expect many years of trouble-free use of your S tewart projection screen. We encourage you to keep your screen clean. T o protect your screen when it is not in use, store it in the fully retracted position. Avoid getting any foreign material on the screen, as cleaning may prove very difficult. It may not be possible to ...
-
Stewart Filmscreen Corp CM-1005 - page 18
Refer to the following guidelines if you encounter a difficulty in the operation of your S tewart Filmscreen. Problems related to electrical or motor function may require a qualified service person or electrician. Should you have a problem that is not addressed here, call the S tewart Filmscreen Corporation. 16 S tewart Filmscreen Corporation T ROU ...
-
Stewart Filmscreen Corp CM-1005 - page 19
Visionary Electriscreen: Owner’s Manual 17 Problem description Probable cause A ction to take Screen continues past bottom stop position. W hite lim it switch is out of adjustm ent. Readjust the white DOW N limit switch. See pp. 13 - 14 of this manual. Batten retracts too f ar into case. Yellow limit sw itch out of adjustm ent. Failure to correct ...
-
Stewart Filmscreen Corp CM-1005 - page 20
www .stewartfilm.com 1-800-762-4999 Fax (310) 326-6870 ...
Haben Sie eine Frage bezüglich Stewart Filmscreen Corp CM-1005?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Stewart Filmscreen Corp CM-1005 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Stewart Filmscreen Corp CM-1005 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.