Deutsch dropdown-ico

Bedienungsanleitung Worksaver SDM40-72

40 Seiten 0.4 mb
Download

Zur Seite of 40

Summary
  • Worksaver SDM40-72 - page 1

    OWNER’S / OPERA T OR’S MANUAL MODEL NO’ s SDM40-48 SDM40-60 SDM40-72 CAUTION For Safe Operation Read Rules And Instructions Carefully SINO LEEINGLES, PIDA A YUDA A AIGUIEN QUE SI LO LEA P ARA QUE LE TRADUZCA LAS MEDIDAS DE SEGURIDAD. SAFETY PRECAUTIONS MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS. A VOID NEEDLESS ACCIDENTS BY FOLLO ...

  • Worksaver SDM40-72 - page 2

    1 38 T ABLE OF CONTENTS SPECIFICA TIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CHECKLISTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY INFORMA TION . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SAFETY SIGNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ...

  • Worksaver SDM40-72 - page 3

    SUBJECT MODEL SDM40-48 MODEL SDM40-60 MODEL SDM40-72 Cutting Width . . . . . . . . . . . . . 47” 60 1 / 2 ”7 1 1 / 2 ” Overall Length . . . . . . . . . . . . 86” 98” 109” Overall Width . . . . . . . . . . . . . 50 1 / 2 ”6 2 1 / 2 ”7 4 1 / 2 ” Cutting Height . . . . . . . . . . . . . 1-5” 1-5” 1-5” Deck (Welded Construction) ...

  • Worksaver SDM40-72 - page 4

    3 36 DAIL Y CHECKLIST h Check that cutter is properly and securely attached to tractor . h During inspection, check that all nuts and bolts are secure and that all safety shields are in place. h It is very important that the blade carrier nut and blade bolts are checked and tightened frequently . h Check condition of blades and security of attach- ...

  • Worksaver SDM40-72 - page 5

    35 4 T o the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded opera- tor who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize ...

  • Worksaver SDM40-72 - page 6

    5 34 SAFETY INSTRUCTIONS ( continued) Safety of the operator is one of the main concerns in designing and developing a new piece of equipment. Designers and manufacturers build in as many safety features as possible. However , every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to ha ...

  • Worksaver SDM40-72 - page 7

    33 6 SAFETY INSTRUCTIONS ( continued) Keep safety signs clean and legible at all times. Replace safety signs that are missing or have become illegible. Replaced parts that displayed a safety sign should also display the current sign. Safety signs are available from your Distributor or Dealer Parts Department or the factory . Be sure that the instal ...

  • Worksaver SDM40-72 - page 8

    7 32 SAFETY INSTRUCTIONS ( continued) Safety is a primary concern in the design and manufacture of our products. Unfortunately , our efforts to provide safe equipment can be wiped out by a single careless act of an operator . Know your controls and how to stop tractor , engine, and cutter quickly in an emergency . Read this manual and the one provi ...

  • Worksaver SDM40-72 - page 9

    31 8 SAFETY INSTRUCTIONS ( continued) Never operate the tractor and cutter until you have read and completely understand this manual, the T ractor Operator ’s Manual, and each of the Safety Messages found on the safety signs on the tractor and cutter . Clear area to be cut of stones, branches or other debris that might be thrown, causing injury o ...

  • Worksaver SDM40-72 - page 10

    9 30 SAFETY INSTRUCTIONS ( continued) Cutter operating power is supplied from tractor PTO. Refer to your tractor manual for PT O engagement and disengagement instructions. Always operate PTO at 540 RPM. Know how to stop tractor and cutter quickly in case of an emergency . All tractors that are not equipped with a “live” takeoff (PT O) need to b ...

  • Worksaver SDM40-72 - page 11

    29 10 SAFETY INSTRUCTIONS ( continued) Always stop the tractor , set brake, shut off the tractor engine, remove the ignition key , lower implement to the ground and allow cutter blades to come to a complete stop before dismounting tractor . Never leave equipment unattended with the tractor running. Never place hands or feet under cutter with tracto ...

  • Worksaver SDM40-72 - page 12

    11 28 SAFETY INSTRUCTIONS ( continued) Stop cutter and tractor immediately upon striking an obstruction. T urn engine off, remove key , inspect and repair any damage before resuming operation. The chain guards, bands, flaps, driveline shields, and gearbox shields should be used and maintained in good working condition. They should be inspected care ...

  • Worksaver SDM40-72 - page 13

    27 12 SAFETY INSTRUCTIONS ( continued) Comply with state and local laws governing highway safety and movement of farm machinery on public roads. The use of flashing amber lights is acceptable in most localities. However , some localities prohibit their use. Local laws should be checked for all highway lighting and marking requirements. When driving ...

  • Worksaver SDM40-72 - page 14

    13 26 SAFETY INSTRUCTIONS ( continued) Good maintenance is your responsibility . Poor maintenance is an invitation to trouble. Follow good shop practices. - Keep service area clean and dry . - Be sure electrical outlets and tools are properly grounded. - Use adequate light for the job at hand. Make sure there is plenty of ventilation. Never operate ...

  • Worksaver SDM40-72 - page 15

    25 14 SAFETY INSTRUCTIONS ( continued) After servicing, be sure all tools, parts and service equipment are removed. Check to ensure all safety signs are installed and in good condition. (See safety sign section for location drawing.) Do not allow grease or oil to build up on any deck or platform. Never replace hex bolts with less than grade five bo ...

  • Worksaver SDM40-72 - page 16

    15 24 The types of Safety Sign and locations on the equipment are shown in the illustration below . Good safety requires that you familiarize yourself with the various Safety Signs, the type of warning and the area, or particular function related to that area, that requires your SAFETY A W ARENESS. REMEMBER: If Safety Signs have been damaged, remov ...

  • Worksaver SDM40-72 - page 17

    23 16 The types of Safety Sign and locations on the equipment are shown in the illustration below . Good safety requires that you familiarize yourself with the various Safety Signs, the type of warning and the area, or particular function related to that area, that requires your SAFETY A W ARENESS. REMEMBER: If Safety Signs have been damaged, remov ...

  • Worksaver SDM40-72 - page 18

    17 22 TRACTOR REQUIREMENTS AND PREP A R A TION The models SDM40-48, SDM40-60 and SDM40-72 Standard Duty Cutters require a Category I 3-pt. hitch tractor of at least 20 horsepower or up to 50 horsepower and equipped with a 540 rpm PTO (power takeof f) in good working condition. It is recommended that only tractors with wide front axles be used with ...

  • Worksaver SDM40-72 - page 19

    21 18 Figure 2. Figure 3. NOTE: The use of a PTO over-running clutch or exten- sion could require that the PTO driveline be shortened a considerable amount. If this is done, the driveline halves may separate when the cutter is lowered to the ground or when operated on rough ground. An optional special driveline that is equipped with an over- runnin ...

  • Worksaver SDM40-72 - page 20

    19 20 A TT ACHMENT The cutter is shipped partially assembled. Assembly will be easier if components are aligned and loosely assem- bled before tightening hardware. Recommended torque values for hardware are located on page 26. Select a suitable working area. Refer to illustrations, accompanying text, parts lists and exploded view drawings. Complete ...

  • Worksaver SDM40-72 - page 21

    19 20 A TT ACHMENT The cutter is shipped partially assembled. Assembly will be easier if components are aligned and loosely assem- bled before tightening hardware. Recommended torque values for hardware are located on page 26. Select a suitable working area. Refer to illustrations, accompanying text, parts lists and exploded view drawings. Complete ...

  • Worksaver SDM40-72 - page 22

    21 18 Figure 2. Figure 3. NOTE: The use of a PTO over-running clutch or exten- sion could require that the PTO driveline be shortened a considerable amount. If this is done, the driveline halves may separate when the cutter is lowered to the ground or when operated on rough ground. An optional special driveline that is equipped with an over- runnin ...

  • Worksaver SDM40-72 - page 23

    17 22 TRACTOR REQUIREMENTS AND PREP A R A TION The models SDM40-48, SDM40-60 and SDM40-72 Standard Duty Cutters require a Category I 3-pt. hitch tractor of at least 20 horsepower or up to 50 horsepower and equipped with a 540 rpm PTO (power takeof f) in good working condition. It is recommended that only tractors with wide front axles be used with ...

  • Worksaver SDM40-72 - page 24

    23 16 The types of Safety Sign and locations on the equipment are shown in the illustration below . Good safety requires that you familiarize yourself with the various Safety Signs, the type of warning and the area, or particular function related to that area, that requires your SAFETY A W ARENESS. REMEMBER: If Safety Signs have been damaged, remov ...

  • Worksaver SDM40-72 - page 25

    15 24 The types of Safety Sign and locations on the equipment are shown in the illustration below . Good safety requires that you familiarize yourself with the various Safety Signs, the type of warning and the area, or particular function related to that area, that requires your SAFETY A W ARENESS. REMEMBER: If Safety Signs have been damaged, remov ...

  • Worksaver SDM40-72 - page 26

    25 14 SAFETY INSTRUCTIONS ( continued) After servicing, be sure all tools, parts and service equipment are removed. Check to ensure all safety signs are installed and in good condition. (See safety sign section for location drawing.) Do not allow grease or oil to build up on any deck or platform. Never replace hex bolts with less than grade five bo ...

  • Worksaver SDM40-72 - page 27

    13 26 SAFETY INSTRUCTIONS ( continued) Good maintenance is your responsibility . Poor maintenance is an invitation to trouble. Follow good shop practices. - Keep service area clean and dry . - Be sure electrical outlets and tools are properly grounded. - Use adequate light for the job at hand. Make sure there is plenty of ventilation. Never operate ...

  • Worksaver SDM40-72 - page 28

    27 12 SAFETY INSTRUCTIONS ( continued) Comply with state and local laws governing highway safety and movement of farm machinery on public roads. The use of flashing amber lights is acceptable in most localities. However , some localities prohibit their use. Local laws should be checked for all highway lighting and marking requirements. When driving ...

  • Worksaver SDM40-72 - page 29

    11 28 SAFETY INSTRUCTIONS ( continued) Stop cutter and tractor immediately upon striking an obstruction. T urn engine off, remove key , inspect and repair any damage before resuming operation. The chain guards, bands, flaps, driveline shields, and gearbox shields should be used and maintained in good working condition. They should be inspected care ...

  • Worksaver SDM40-72 - page 30

    29 10 SAFETY INSTRUCTIONS ( continued) Always stop the tractor , set brake, shut off the tractor engine, remove the ignition key , lower implement to the ground and allow cutter blades to come to a complete stop before dismounting tractor . Never leave equipment unattended with the tractor running. Never place hands or feet under cutter with tracto ...

  • Worksaver SDM40-72 - page 31

    9 30 SAFETY INSTRUCTIONS ( continued) Cutter operating power is supplied from tractor PTO. Refer to your tractor manual for PT O engagement and disengagement instructions. Always operate PTO at 540 RPM. Know how to stop tractor and cutter quickly in case of an emergency . All tractors that are not equipped with a “live” takeoff (PT O) need to b ...

  • Worksaver SDM40-72 - page 32

    31 8 SAFETY INSTRUCTIONS ( continued) Never operate the tractor and cutter until you have read and completely understand this manual, the T ractor Operator ’s Manual, and each of the Safety Messages found on the safety signs on the tractor and cutter . Clear area to be cut of stones, branches or other debris that might be thrown, causing injury o ...

  • Worksaver SDM40-72 - page 33

    7 32 SAFETY INSTRUCTIONS ( continued) Safety is a primary concern in the design and manufacture of our products. Unfortunately , our efforts to provide safe equipment can be wiped out by a single careless act of an operator . Know your controls and how to stop tractor , engine, and cutter quickly in an emergency . Read this manual and the one provi ...

  • Worksaver SDM40-72 - page 34

    33 6 SAFETY INSTRUCTIONS ( continued) Keep safety signs clean and legible at all times. Replace safety signs that are missing or have become illegible. Replaced parts that displayed a safety sign should also display the current sign. Safety signs are available from your Distributor or Dealer Parts Department or the factory . Be sure that the instal ...

  • Worksaver SDM40-72 - page 35

    5 34 SAFETY INSTRUCTIONS ( continued) Safety of the operator is one of the main concerns in designing and developing a new piece of equipment. Designers and manufacturers build in as many safety features as possible. However , every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to ha ...

  • Worksaver SDM40-72 - page 36

    35 4 T o the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded opera- tor who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize ...

  • Worksaver SDM40-72 - page 37

    3 36 DAIL Y CHECKLIST h Check that cutter is properly and securely attached to tractor . h During inspection, check that all nuts and bolts are secure and that all safety shields are in place. h It is very important that the blade carrier nut and blade bolts are checked and tightened frequently . h Check condition of blades and security of attach- ...

  • Worksaver SDM40-72 - page 38

    SUBJECT MODEL SDM40-48 MODEL SDM40-60 MODEL SDM40-72 Cutting Width . . . . . . . . . . . . . 47” 60 1 / 2 ”7 1 1 / 2 ” Overall Length . . . . . . . . . . . . 86” 98” 109” Overall Width . . . . . . . . . . . . . 50 1 / 2 ”6 2 1 / 2 ”7 4 1 / 2 ” Cutting Height . . . . . . . . . . . . . 1-5” 1-5” 1-5” Deck (Welded Construction) ...

  • Worksaver SDM40-72 - page 39

    1 38 T ABLE OF CONTENTS SPECIFICA TIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CHECKLISTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY INFORMA TION . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SAFETY SIGNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ...

  • Worksaver SDM40-72 - page 40

    OWNER’S / OPERA T OR’S MANUAL MODEL NO’ s SDM40-48 SDM40-60 SDM40-72 CAUTION For Safe Operation Read Rules And Instructions Carefully SINO LEEINGLES, PIDA A YUDA A AIGUIEN QUE SI LO LEA P ARA QUE LE TRADUZCA LAS MEDIDAS DE SEGURIDAD. SAFETY PRECAUTIONS MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS. A VOID NEEDLESS ACCIDENTS BY FOLLO ...

Produzent Worksaver Kategorie Brush Cutter

Dokumente, die wir vom Produzenten des Geräts Worksaver SDM40-72 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Worksaver
- Bedienungsanleitungen SDM40-72
- Produktkarten Worksaver
- Informationsbroschüren
- oder Energieetiketten Worksaver SDM40-72
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Worksaver SDM40-72.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Worksaver SDM40-72, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Worksaver SDM40-72. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Worksaver SDM40-72 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Worksaver SDM40-72, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Worksaver SDM40-72 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Worksaver SDM40-72 verständlich ist.

Eine gänzliche Bedienungsanleitung von Worksaver sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Worksaver SDM40-72 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Worksaver SDM40-72 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Worksaver SDM40-72, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Worksaver SDM40-72 - die uns die ersten Schritte während der Nutzung von Worksaver SDM40-72 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Worksaver SDM40-72 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Worksaver SDM40-72 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Worksaver SDM40-72?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Worksaver SDM40-72 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Worksaver SDM40-72 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)