Deutsch dropdown-ico

Bedienungsanleitung Siig CN-WR0412-S1

28 Seiten Betrifft nicht
Download

Zur Seite of 28

Summary
  • Siig CN-WR0412-S1 - page 1

    1 Wireless-N CardBus Adapter Quick Installation Guide Introducing the Wireless-N CardBus Adapter The Wireless-N CardBus Adapter is designed to add 802.11n wireless network to your notebook computer for fast internet access. Features and Benefits • Compliant with 802.11n draft 2.0, 802.11g and 802.11b standards • Supports QoS-WMM, WMM-PS • Sup ...

  • Siig CN-WR0412-S1 - page 2

    2 Package Contents • Wireless-N CardBus Adapter • Driver CD • Quick Installation Guide Layout Activity LED Flashing: Transferring/receving data Off: No wireless activity Link LED On: Linked to a wireless access point/transferring data Off: No wireless activity Activity LED Link LED Figure 1: Layout ...

  • Siig CN-WR0412-S1 - page 3

    3 Safety Information In order to keep the safety of users and your properties, please follow the following safety instructions: 1. This wireless network card is designed for indoor use only. DO NOT expose this network card to direct sun light, rain, or snow. 2. DO NOT put this network card at or near hot or humid places, like kitchen or bathroom. A ...

  • Siig CN-WR0412-S1 - page 4

    4 3. Power on your notebook computer. Note : In most system it is not necessary to turn off the notebook before inserting the cardbus adapter into the cardbus slot. Driver Installation Windows 2000/XP/2003 Server 1. At the Found New Hardware Wizard , click Cancel . 2. Insert the driver CD, Click Start , Run . Type D:CardBussetup.exe , click OK . ...

  • Siig CN-WR0412-S1 - page 5

    5 Windows Vista ™ 1. At the Found New Hardware window, click Cancel . 2. Insert the driver CD. Click Start , in the Start Search box, type D:CardBussetup.exe , press Enter . (Change the D: to match your CD-ROM drive letter) 3. Click Allow . 4. Choose I accept the terms of the license agreement , then click Next . 5. Choose Install driver and Ra ...

  • Siig CN-WR0412-S1 - page 6

    6 If you stopped config utility by Exit function, you will not be able to maintain the wireless link to the access point you wish to use. In this case, you can start config utility again by clicking Start, All Programs, Ralink Wireless , Ralink Wirelss Utility . Connecting to Wireless Access Point After the driver is correctly installed, it will tr ...

  • Siig CN-WR0412-S1 - page 7

    7 Figure 3 2. Configuration utility will scan for all wireless access points automatically. Scan results will be displayed here, please check if the wireless access point with the SSID (the name of wireless access point) you preferred is shown in Figure 4 . If the wireless access point you wish to connect does not show here, please click Rescan to ...

  • Siig CN-WR0412-S1 - page 8

    8 3. Click the wireless access point or network device you wish to connect to, then click Connect , shown in Figure 5 below. Figure 5 The non-encrypted access point (The Encryption field indicate None) will connected within one minute. Please jump to step 5 on page 9 if the access point you selected enables encryption, otherwise proceed to next ste ...

  • Siig CN-WR0412-S1 - page 9

    9 If the wireless access point you selected have SSID, please skip this step, shown in Figure 6 . Figure 6 5. If the wireless access point uses encryption, you have to input WEP passphrase or WPA preshared key. Shown on Figure 7 , please ask the owner of the wireless access point to obtain the correct passphrase/preshared key and enter here, then c ...

  • Siig CN-WR0412-S1 - page 10

    10 6. You’ll see Connected <-> SSID (SSID is the SSID of the wireless access point or wireless device you connected to) message displayed at lower-left corner of configuration utility, congratulations, you’re successfully connected to the access point or wireless device you selected, shown in Figure 8 . Figure 8 SSID : The Service Set IDe ...

  • Siig CN-WR0412-S1 - page 11

    11 Signal : Shows the signal strength of access point or wireless device. Larger number means better radio strength. Channel : Shows the channel number that access point or wireless device uses. Encryption : Shows the encryption method that access point or wireless device uses. If the wireless access point does not enable encryption, you’ll see N ...

  • Siig CN-WR0412-S1 - page 12

    12 Using Windows Zero Configuration Windows XP and Vista has a built-in wireless network configuration utility called Windows Zero Configuration (WZC). You can use WZC to configure your wireless network adapter. 1. Right-click Ralink configuration utility icon and select Use Zero Configuration as Configuration utility, shown in Figure 9. Figure 9 2 ...

  • Siig CN-WR0412-S1 - page 13

    13 Figure 10 5. All wireless access points in proximity will be displayed here. If the access point you want to use is not displayed here, please move your computer closer to the access point, or you can click Refresh network list to rescan access points. Click the access point you want to use if it’s shown, then click Connect, shown in Figure 11 ...

  • Siig CN-WR0412-S1 - page 14

    14 7. If you can see Connected message, the connection between your computer and wireless access point is successfully established. Soft-AP Function In addition to being a wireless client of other wireless access points, this wireless card can act as a wireless service provider. You can switch this wireless card’s operating mode to AP mode to sim ...

  • Siig CN-WR0412-S1 - page 15

    15 After you select Switch to AP Mode , the Ralink utility icon will indicated the wireless card is operating in AP mode now. If you want to switch the wireless card back to station mode (become a client of other wireless access points), click Switch to Station Mode . Config Figure 13 SSID : Please input the SSID (the name used to identify this wir ...

  • Siig CN-WR0412-S1 - page 16

    16 Channel : Please select the wireless channel you wish to use. The number of channels available here will vary depends on the setting of Country Region Code . Wireless Mode : Please select the wireless operating mode. You can limit the type of wireless client to 802.11b or 802.11g only, or allow 802.11b/g, and 802.11b/g/n clients. It’s safe to ...

  • Siig CN-WR0412-S1 - page 17

    17 2 : SPAIN 3 : FRANCE 4 : MKK 5 : MKKI (TELEC) 6 : ISRAEL (Channel 3 to 9) 7 : ISRAEL (Channel 5 to 13) Beacon(ms) : You can define the time interval that a beacon signal should be send. Default value is 100. Do not modify this value unless you know what will be affected. Idle Time : Select the idle time of your wireless network card. Default val ...

  • Siig CN-WR0412-S1 - page 18

    18 Security Settings This wireless card supports wireless encryption in AP mode, which will encrypt the data being transferred over the air to enhance data security level. It’s recommended to enable data encryption unless you wish to open your computer (and its internet connection) to the public. When you click Security Setting in Ralink configur ...

  • Siig CN-WR0412-S1 - page 19

    19 Encryption Type : Please select an encryption mode. The available options in this setting item will vary depending on the authentication type you select. If you select Not Use , data will not be encrypted and people with some networking knowledge will be able to read the data you transfer with proper tool. Note : WPA encryption is safer than WEP ...

  • Siig CN-WR0412-S1 - page 20

    20 If you want to use WEP 64 bit encryption, please input 10 characters; if you select HEX, or input 5 characters if you select ASCII; If you want to use WEP 128bit encryption, please input 26 characters if you select HEX, or input 13 characters if you select ASCII. 128 bit encryption is safer then 64 bit, but the data transfer speed will be slight ...

  • Siig CN-WR0412-S1 - page 21

    21 Figure 15 Access Policy : Select the policy type of your access rule: Disable :Allow any wireless client with proper authentication settings to connect to this access point. Allow All : Only allow wireless clients with MAC address listed here to connect to this access point. Reject All: Reject wireless clients with MAC address listed here to be ...

  • Siig CN-WR0412-S1 - page 22

    22 Mac Table Show the list all wireless clients connected to this access point, shown in Figure 16. Figure 16 MAC Address : Displays the MAC address of this wireless client. AID : The serial number of this wireless connection. Power Saving Mode : Displays the capability of power saving function of this wireless client. Status : Displays additional ...

  • Siig CN-WR0412-S1 - page 23

    23 Event Log This software access point will log all wireless-related activities as a log, shown in Figure 17 . Figure 17 You can click Clear to remove all entries in the log. ...

  • Siig CN-WR0412-S1 - page 24

    24 Statistics This page shows detailed information about how your software access point works, shown in Figure 18 . Figure 18 You can click RESET COUNTERS button to reset all counters to zero. ...

  • Siig CN-WR0412-S1 - page 25

    25 Blank Page ...

  • Siig CN-WR0412-S1 - page 26

    26 Blank Page ...

  • Siig CN-WR0412-S1 - page 27

    27 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst ...

  • Siig CN-WR0412-S1 - page 28

    About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-stop source of upgrades. SIIG products offer ...

Produzent Siig Kategorie Network card

Dokumente, die wir vom Produzenten des Geräts Siig CN-WR0412-S1 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Siig
- Bedienungsanleitungen CN-WR0412-S1
- Produktkarten Siig
- Informationsbroschüren
- oder Energieetiketten Siig CN-WR0412-S1
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Siig CN-WR0412-S1.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Siig CN-WR0412-S1, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Siig CN-WR0412-S1. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Siig CN-WR0412-S1 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Siig CN-WR0412-S1, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Siig CN-WR0412-S1 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Siig CN-WR0412-S1 verständlich ist.

Eine gänzliche Bedienungsanleitung von Siig sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Siig CN-WR0412-S1 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Siig CN-WR0412-S1 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Siig CN-WR0412-S1, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Siig CN-WR0412-S1 - die uns die ersten Schritte während der Nutzung von Siig CN-WR0412-S1 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Siig CN-WR0412-S1 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Siig CN-WR0412-S1 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Siig CN-WR0412-S1?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Siig CN-WR0412-S1 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Siig CN-WR0412-S1 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)