-
Shiro SD8141 - page 1
...
-
Shiro SD8141 - page 2
Thank you for your choice of the new digital cordless phone Shiro SD8141. SD8141 is a DECT (Digital European Cordless T elephone) phone with GAP (Generic Access Profile) profile. T o the quality of audio and to the safety offered from the digital technology , SD8141 offer manifold and useful features including, caller identification, automatic rout ...
-
Shiro SD8141 - page 3
Index SD8141 . Accessories . T echnical data . A glance guide to the buttons on your . handset . Key and symbols description . A glance guide to the buttons on the base . Installation and set-up . AC/DC adaptor installation . Phone line connection . Battery installation . Battery charging . Coverage range . Precautions . Handset On/Off . Before usi ...
-
Shiro SD8141 - page 4
A glance guide to the buttons on your handset. The handset INT RD SD 8141 Earpiece Listening Display See page 4. 02899832620 MEM button press to make calls to numbers stored in memory FLASH button you will need this if your phone is connected to a PBX, or if you use Call- waitting servies PHONE button press to begin, answer and end a telephone call ...
-
Shiro SD8141 - page 5
Key and symbols description Handset: : Hook switch key; : Intercom key between handsets; : phone book access key and flash key ; : mute key , delete key and Menu exit k ey ; : Menu access key , confirmation key , handset On-Off; : Redial list key / up arrow; : caller identification list access key and down arrow; : hands free speaker phone key; Dis ...
-
Shiro SD8141 - page 6
Incoming Call Light Charging Light Page Button New Call / In Use The headset jack The headset jack let you use the handset**(optional). Start by plugging it into the bottom of the handset as shown. ** Y ou can purchase the handset from our office or purchase a mobile phone handset(motoroXX type).Make sure the volume is turned up as the mobile phone ...
-
Shiro SD8141 - page 7
DC 9V Installation and Setting Up 1 Choose a suitable site for the base unit. M sure it is not near to another telephone other electrical equipment ake or 2 Plug the main power lead and the telephone line cord into the back of the base unit 3 Plug the power adaptor into a 230 V AC, 50 HZ main socket, with the switch on the socket set to OFF 4 Switc ...
-
Shiro SD8141 - page 8
AC/DC adaptor installation Connect the plug of the adaptor to the power jack of the base set located at the back, and connect it to the 220V sock et. Phone line connection Connect the plug of the telephone line cord to the jack of base set located at the back, and connect it the line socket. Batter y installation 1- Remove the battery door; 2- Inse ...
-
Shiro SD8141 - page 9
Handset On/Off Press key to switch handset On or put it in the cradle for charging. It will switch On automatically . T o switch Off , hold and press key for approximately 2 seconds. Before using the unit, check: 1) The installation was performed properly; 2) The batteries have been charged properly; 3) The LCD display " OFF " (press key ...
-
Shiro SD8141 - page 10
P utting the caller on hold During a phone conversation, press the INT k ey . The other party will hear beeping sound. Press INT k ey again to restore the phone conversation. Microphone mute During a phone conversation, press key , the LCD screen will display . The microphone will be disabled, but you will still be able to hear the caller . Press a ...
-
Shiro SD8141 - page 11
Caller Identity ( work able only if subscribed with network operator ) SD8141 is able to display the caller number . If the caller number is stored into the phone book, the name will be displayed. It stores the last 20 calls automatically (the symbol on LCD screen and the light on the base will blink when the call is not answered). To see the calle ...
-
Shiro SD8141 - page 12
Warning and confirmation tone On/Off There will be a warning beep when the phone is Out of range, L ow Batter y , Confirmation at Programming and K ey Click. These tones can be disabled by: - enter sub- menu " HANDSET " which is in the main menu, search for "T ONES" . Enter this menu and search for the tone you wont to disable o ...
-
Shiro SD8141 - page 13
Base ringer tone setting Set up to 5 different ringer tones. T o set, follow as below: - enter sub-menu " BASE " which is in the main menu, search for " RINGER " . Press and select " MELOD Y " . Press and the desired tone by or keys. Press to confirm. Ringer priority setting Choose the ring setting between base or hand ...
-
Shiro SD8141 - page 14
Phone book SD8141 can store up to 40 alphanumeric memories with name of 8 ch aracters and numbers of 18 digits. T o store, follow as below: - enter sub-menu " PHONEBOOK " which is in the main menu and select " NEW " . Input name by the alphanumeric keypad (see table below) and press . Input number and press key to confirm. Escap ...
-
Shiro SD8141 - page 15
Alarm setting SD8141 is equipped with daily alarm. The alarm can be set daily but the alarm time will reflect the time that was set previously . The alarm duration is 30 seconds. Press any handset key to stop alarm. T o set, follow as below: - enter sub-menu " HANDSET " which is in the main menu and search for " AL ARM " . Enter ...
-
Shiro SD8141 - page 16
P ABX code T o obtain an external line, the norm is to dial a ‘0’ or ‘9’ for dial tone if the unit is connected to a P ABX. If you were to program a PABX code, there will be a pause of 3/5 seconds between the line access code (0 or 9) and the number to be dialled out. When numbers are stored in the phone book, insert ‘0’ or ‘9’ as t ...
-
Shiro SD8141 - page 17
LCR (L east Cost Routing) SD8141 is equipped with LCR multi carrier system. T o understand the operational method of LCR, there is a need to deepen the routing. Programming the sub-menu "LCR " allows the routing of the numbers you prefer . To set, follow as below: - Primar y : main secondar y network operator toward which you want to rout ...
-
Shiro SD8141 - page 18
Setting LCR “Special” Enter sub-menu "LCR " which is in the main menu and search for " SPECIAL " . Press and look for " NEW " . Press , enter area code up to maximum 6 digit and press to confirm. T o modify an area code : under sub-menu " SPECIAL " , select " MODIFY ". Look for the area code to ...
-
Shiro SD8141 - page 19
De-subscribe an handset Enter sub- menu " BASE " which is in the main menu and search for " ADV ANCED " . Press , "PIN " will be displayed. Enter PIN code (0000 default) and press . Look for " DEL HS " and press . The LCD screen will display " HANDSET 1 " . Choose the handset to be deleted and press ...
-
Shiro SD8141 - page 20
Subscribe handset to another base The procedure is the same as those described in "Subscription of optional handset". If the base where you want to subscribe the SD8141 handset is of a different model, please follow the instruction manual on how to put it in subscription mode. When you are done, follow the same procedure described in &quo ...
Haben Sie eine Frage bezüglich Shiro SD8141?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Shiro SD8141 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Shiro SD8141 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.