Bedienungsanleitung Metabo 170-230

17 Seiten 1.08 mb
Download

Zur Seite of 17

Summary
  • Metabo 170-230 - page 1

    115 117 3671 / D/GB/F/NL /1303 - 5.1 Betriebsanleitung Schutzgas-Schweißgeräte MIG/MAG 170 - 230 Operating Instruction MIG W elding Machines 170 - 230 Amp Models Notice d´utilisation postes de soudure semiautomatiques MIG/MAG 170 - 230 Gebruiksaanwijzing Lasapparaat MIG/MAG 170/230 D GB F NL Achtung! Lesen Sie diese Anleitung vor der Installatio ...

  • Metabo 170-230 - page 2

    GB User Responsibility This machine will perform in conformity with the description contained in the instructions provided. This machine must be checked periodically. Defective equipment (including service leads) should not be used. Parts that are broken, missing, plainly worn, distorted or contaminated, should be replaced immediately. Should such ...

  • Metabo 170-230 - page 3

    MIG/MAG MIG/MAG MIG/MAG 180/35 ET 200/35 ET 230/40 ET Combi Welding range 25 - 180 A 25 - 200 A 25 - 230 A Open-circuit voltage 15.3 - 23 V 15.3 - 24 V 15.3 - 25,5 V No-load voltage 17.5 - 33 V 21 - 34 V 19 - 34 V Input capacity 3.6/4.6 kVA 6 kVA 6.5 kVA Mains 50/60 Hz AC 1 ~ 230 V/2 ~ 400 V 3 ~ 400 V 3 ~ 400 V Frequency 50-60 Hz 50-60 Hz 50-60 Hz ...

  • Metabo 170-230 - page 4

    2.1 Welding Output Box 6 Welding process Symbol e.g.: Manual metal arc welding with covered electrodes Tungsten inert-gas welding Metal inert and active gas welding including the use of flux cored wire Selfshielded flux cored arc welding Submerged arc welding Symbol for plasma cutting Symbol for plasma gouging Box 7 Symbol for welding power sources ...

  • Metabo 170-230 - page 5

    b) Welding Output Box 6 Welding process Symbol e.g.: Manual metal arc welding with covered electrodes Tungsten inert-gas welding Metal inert and active gas welding including the use of flux cored wire Selfshielded flux cored arc welding Submerged arc welding Symbol for plasma cutting Symbol for plasma gouging Box 7 Symbol for welding power sources ...

  • Metabo 170-230 - page 6

    Column a) need not be used if the duty cycle (duty factor) for the rated maximum welding current is 60 % or 100 %. Column b) need not be used if the duty cycle (duty factor) at the rated maximum welding current is 100 %. c) Energy input Box 14 Energy input symbol e.g.: Input supply, number of phases (e.g. l or 3), symbol for alternating current and ...

  • Metabo 170-230 - page 7

    4 Installing the Wire Spool 4.1 Disconnect from power mains Place wire spool onto spool carrier so that wire runs off clockwise. Central coupling KZ 2 for welding gun Wire feed regulator Weld time pot Dwell time pot Welding mode selector (E-models only) Welding step selector Neon Control Light Mains on/off switch Earth cable socket 230 V/ 400 V Com ...

  • Metabo 170-230 - page 8

    4.2 Wire Feed Set-up 5 Welding Stainless Steel and Aluminium This MIG welding machine is factory set for welding low-carbon steel. Use a mixed gas (e.g. Ar 99.988 %). 4.3 Feeding the Wire into the Torch Place the wire through the spiral guide tube across the feed roller into the central coupling's wire intake. Bring tension roller in position ...

  • Metabo 170-230 - page 9

    1. Disconnect torch lead assembly from machine and remove electrode wire. 2. Place aluminium wire spool onto spool carrier. 3. Remove liner collet from the torch lead's central coupling and pull steel liner from torch lead assembly. 4. Remove gas shroud and contact tip from torch and replace with cylindrical gas shroud an contact tip "A&q ...

  • Metabo 170-230 - page 10

    6 Practical Hints for MIG Welding This distance required between the torch and the workpiece is directly related to the welding current: ● small current = small distance ● high current = greater distance Too little distance causes excessive wear of the contact tip and gas shroud. Too much distance will not provide enough gas protection of the w ...

  • Metabo 170-230 - page 11

    8 Trouble Shooting Irregular wire feed Incorrect tension of tension roller Pilot groove of feed roller and intake nozzle not aligned Liner clogged or not correct size for wire Wire spooled irregularly, rusty or of inferior quality Wire spool carrier to tight Feed rollers dirty of worn, groove not matching wire size Adjust tension Align Check and/or ...

  • Metabo 170-230 - page 12

    9 Spare Parts List and Accessories 170/30 170/30 180/35 200/35 230/40 TL TL ET ET ET Description Stock-no. Combi Combi Rectifier bank 805 307 5313 x x Rectifier bank 805 307 0850 x Rectifier bank 805 307 1717 x Rectifier bank 805 307 1725 x Rotary fan 804 106 5703 x x x x x Central coupling 132 703 3430 x x x x x 6-step selector switch 811 507 1336 ...

  • Metabo 170-230 - page 13

    Pos. Description Order No. Welding torch SB 14/2 cpl. with torch leads 3 m 090 200 9914 10 Swan neck cpl. 090 202 7378 12 Nozzle spring (5x) 090 202 7670 13 Head insulator 132 704 5241 15 Swan neck boot 132 706 1093 20 Handle red cpl. 132 704 5101 21 Trigger red 2-pol. 132 707 4772 30 Cable support 132 704 5209 41 Lock nut M10x1 132 704 5110 60 Cab ...

  • Metabo 170-230 - page 14

    MIG W elding T orch SB 15/3; SB 15/4; SB 15/5 For models: MIG/MAG 180/35 ET Combi MIG/MAG 200/35 ET Pos. Description Order No. Welding torch SB 15/2 3 090 200 9949 Welding torch SB 15/2 4 090 200 9957 Welding torch SB 15/2 5 090 200 9965 10 Swan neck 090 202 7386 12 Nozzle spring (5x) 090 202 7670 13 Head insulator 132 704 5241 14 Swan neck spacer ...

  • Metabo 170-230 - page 15

    MIG W elding T orch SB 25/2 For models: MIG/MAG 230/40 ET Pos. Description Stock-No. 100 Contact tip M6 - 1.0 mm Aluminium 132 700 9709 100 Contact tip M6 - 1.2 mm Aluminium 132 700 9717 110 Contact tip holder 132 707 5574 130 Gas shroud, conical 132 704 5519 131 Gas shroud, cylindrical 132 704 5500 132 Gas shroud, conical small 132 704 5527 133 Ga ...

  • Metabo 170-230 - page 16

    D DEUTSCH ENG ENGLISH KONFORMITÄTSERKLÄRUNG DECLARATION OF CONFORMITY Wir erklären in alleiniger Verantwortlichkeit, daß dieses Produkt mit den folgenden Normen übereinstimmt* gemäß den Bestimmungen der Richtlinien**. We herewith declare in our sole responsibility that this product complies with the following standards* in accordance with th ...

  • Metabo 170-230 - page 17

    Country; Company; Address 1; Address 2; City; Phone; Fax; E-mail Albania; Extra Industrial Goods; Rl. Fadil Rada 88; ; Tirana; (+35 5) 42 - 3 30 62; (+355) 42 - 3 30 62; abeqiri@t-onli ne.de Algerie; Haddad Equipement Pro fessionel; 98 A, Site du Lycée ; ; 16012 Rouiba; (+213) 21 - 85 49 05; (+213) 21 - 85 57 72; heprouiba@hotmail.c om Argentina; ...

Produzent Metabo Kategorie Welder

Dokumente, die wir vom Produzenten des Geräts Metabo 170-230 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Metabo
- Bedienungsanleitungen 170-230
- Produktkarten Metabo
- Informationsbroschüren
- oder Energieetiketten Metabo 170-230
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Metabo 170-230.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Metabo 170-230, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Metabo 170-230. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Metabo 170-230 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Metabo 170-230, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Metabo 170-230 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Metabo 170-230 verständlich ist.

Eine gänzliche Bedienungsanleitung von Metabo sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Metabo 170-230 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Metabo 170-230 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Metabo 170-230, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Metabo 170-230 - die uns die ersten Schritte während der Nutzung von Metabo 170-230 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Metabo 170-230 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Metabo 170-230 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Metabo 170-230?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Metabo 170-230 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Metabo 170-230 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)