Bedienungsanleitung Shiro SD2100

14 Seiten 0.33 mb
Download

Zur Seite of 14

Summary
  • Shiro SD2100 - page 1

    • User Manual • SD2100 Digital Enhanced Cordless Communication ...

  • Shiro SD2100 - page 2

    1 Contents What the symb ols me an ................................................................... 1 The Handset and Bas e Unit ............................................................... 2 Setting up your telephone ................................................................ 3 Installa tion ............................................. ...

  • Shiro SD2100 - page 3

    2 Press to begin, answ er and end a telephone call. Call button Clear / On-Off /END button The Handset and Base Unit Press to enter menu mode and enter sub- menu. With the key " " to lock or unlock the keypad. Press during a call to mute the microphone MENU/ Mute button UP/DOWN button In standby mode, press to show phonebook list; Press d ...

  • Shiro SD2100 - page 4

    3 Setting up your telephone Connection and con ditions for use You can connect your SD 2100 to a direct exchange line (DEL), a line connected to a local exchange, with its own phone number; to an exte nsion socket connected to a DEL; or to an extension on an approved compat ible PBX. Do not connect the SD2100 as an extension to a payphone. How many ...

  • Shiro SD2100 - page 5

    4 Installation 1. Choose a suitable site for the handset unit Make sure it is not near to another telephone, nor to other electrical equipment. 2. Plug the mains power lead into the power jack the base unit and plug the telephone line cord into the telephone port. 3. Plug the mains adapter into a 230 V AC, 50 Hz mains socket, with the switch on the ...

  • Shiro SD2100 - page 6

    5 the base unit from the telephone line and the mains socket when there are storms in your area. Damage caused by lightning is not covered by the Guarantee. 4. The SD2100 will produce a certain amount of hea t during operation. For this reason it is recommended that this equipment is NOT placed in direct contact with antique, veneered or delicate f ...

  • Shiro SD2100 - page 7

    6 • While the mouthpiece is muted, you cannot press any number key to send digits down the line; Press Mute key again to get back to the call. Conference Calling You need to register with your fixed line networ k operator for conference calling service. It is dependant on service availability and subscription. To Make Conference Call: 1. Connect ...

  • Shiro SD2100 - page 8

    7 Call Logs You must subscribe to Caller ID service from your service provider to use this feat ure. Call Logs store information relate d to received calls, missed ca lls and dialed calls. The SD2100 can store up to a maximu m of 30 calls, cons isting of 10 re ceived, missed and d ialed calls respectively. To check call records 1. Press the MENU bu ...

  • Shiro SD2100 - page 9

    8 3. Press the OK button The display shows the current volume level 4. Press UP/DOWN button to change the volume 5. Press the OK button to confirm the volume level you want Ringer Melody (EXT / INT) You can choose the ringer Melody following the below instruction . 1. Press the MENU button, then press UP/DOWN button to the location HANDSET 2. Press ...

  • Shiro SD2100 - page 10

    9 6. Press OK button to confirm To delete call barring number 1. Press MENU button then UP/DOWN button until the display shows BASE SET 2. Press the OK button, the display shows PIN? 3. Key in your PIN number 4. Press the OK button, then UP/DOWN button to the location BARRING 5. Press the OK button, the display shows the call barring number you set ...

  • Shiro SD2100 - page 11

    10 4. Press the OK button and press UP/DOWN button to change Dial mode as TONE or PULSE dialing To reset base 1. Press MENU button, then UP/DOWN button to the location BASE SET 2. Press the OK button, the display shows PIN? 3. Key in your PIN number and press the OK button, then UP/DOWN button to the location B RESET 4. Press OK button, then the di ...

  • Shiro SD2100 - page 12

    11 1. Disconnect the power lead fr om the back of the base unit 2. Press and hold the HANDSET LOCATOR button in the base unit, at the same time connect the power lead into the back of base unit. Release the LOCATOR button after you hear “beep” sound for five times. The IN USE light on base unit lights during this whole process. 3. After 2~3 sec ...

  • Shiro SD2100 - page 13

    12 Troubleshooting Always check first that: • You have followed the steps listed on pa ges to install and set up your SD2100. • All connects are firmly inserted in their sockets. • Mains power is switched on at the socke t. • The handset’s batteries are correctly and se curely installed, and are not run down. If you experience difficultie ...

  • Shiro SD2100 - page 14

    13 The strange noise is caused by interference. Di sconnect the main s power lead from the b ack of the base unit, and then wait for 30 seconds before reconnecting it. There is 'beep' sound while I am on a call. You may be going out of range of the base unit. Move closer, or your call may be cut off. Check the Batteries Level symbol on th ...

Produzent Shiro Kategorie Telephone

Dokumente, die wir vom Produzenten des Geräts Shiro SD2100 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Shiro
- Bedienungsanleitungen SD2100
- Produktkarten Shiro
- Informationsbroschüren
- oder Energieetiketten Shiro SD2100
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Shiro SD2100.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Shiro SD2100, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Shiro SD2100. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Shiro SD2100 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Shiro SD2100, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Shiro SD2100 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Shiro SD2100 verständlich ist.

Eine gänzliche Bedienungsanleitung von Shiro sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Shiro SD2100 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Shiro SD2100 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Shiro SD2100, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Shiro SD2100 - die uns die ersten Schritte während der Nutzung von Shiro SD2100 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Shiro SD2100 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Shiro SD2100 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Shiro SD2100?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Shiro SD2100 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Shiro SD2100 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)