Deutsch dropdown-ico

Bedienungsanleitung AMX MXD-1000-NC

42 Seiten Betrifft nicht
Download

Zur Seite of 42

Summary
  • AMX MXD-1000-NC - page 1

    Operation/Reference Guide Touch Panels MXT/D-1000 10.1" ModeroX Series® Tabletop Touch Panel 10.1" Modero X Series® Wa ll/Flush Mount Touch Panel Last Updated: 10/24/201 2 ...

  • AMX MXD-1000-NC - page 2

    AMX Limited Warranty and Disclaimer This Limited W arranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partn er which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity . AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) ye a ...

  • AMX MXD-1000-NC - page 3

    AMX Software License and Warranty Agreement • LICENSE GRANT . AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. The AMX Software is licensed, no t sold. This license does not grant Licensee the right to create derivative wor ks of t he AMX Software. The AMX Software consists of general ...

  • AMX MXD-1000-NC - page 4

    ...

  • AMX MXD-1000-NC - page 5

    Table of Contents i MXD/T-1000 10.1" Modero® X Series Touch Panels Table of Contents Modero X Series® Touch Panels ........................................................................ 1 Overview .............................. ......................... ................... .................... .................... 1 Features .............. ...

  • AMX MXD-1000-NC - page 6

    ii MXD/T-1000 10.1" Modero® X Series Touch Panels Table of Contents Upgrading Firmware ........................... ............................................... ............... 25 Overview ........... .................... ......................... ................... .................... ................. 25 Upgrading Firmware via USB Flash ...

  • AMX MXD-1000-NC - page 7

    Modero X Series® Touch Panels 1 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Modero X Series® Touch Panels Overview See more and do more with the most ele gant interf ace designed sp ecific ally for dedicated room control. The Modero X Series ® T ouch Panels provide se veral industry f irsts, including a beautiful, panoramic capacitiv e ...

  • AMX MXD-1000-NC - page 8

    Modero X Series® Touch Panels 2 MXD/T-1000 10.1" Modero X Series® Touch Panels MXT-1000 The MXT -1000 ( FG5968-03 ) (FIG. 1) is ideal for boardrooms, conf erence rooms, or auditoriums where a panoramic contro l surface is needed to pro vide access to multiple funct ions simultaneously while remaining elegantly unobtrusi ve. In residences, it ...

  • AMX MXD-1000-NC - page 9

    Modero X Series® Touch Panels 3 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels MXT-1000 Specifications Power Requirements: PoE (Power over Ethernet), 802.3af, class 3 Power Consumption: • Full-On: 8W maximum • Standby: 3.2 W • Shutdown: 1 W F ront Panel Components: NFC T ransceiver: Antenna and transceiver for N ear Field Communica ti ...

  • AMX MXD-1000-NC - page 10

    Modero X Series® Touch Panels 4 MXD/T-1000 10.1" Modero X Series® Touch Panels Connector Locations W ith the unit facing you, the tw o USB ports for peripherals are located on the rear right corner of the device (FIG. 3). The RJ45 connector for PoE, as well as a 5-pin Micro-USB port, is also located on the back of the de vice. In addition to ...

  • AMX MXD-1000-NC - page 11

    Modero X Series® Touch Panels 5 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Memory The MXT -1000 comes with 512 MB of SDRAM and 4 GB of Flash memory , neither of which can be upgraded. A maximum of 2.4 GB is a vailable to the u ser for projects. Basic Operation The MXT -1000 is operated using its inte gral touchscreen, as well as the Sle ...

  • AMX MXD-1000-NC - page 12

    Modero X Series® Touch Panels 6 MXD/T-1000 10.1" Modero X Series® Touch Panels MXD-1000 The MXD-1000 10.1” Modero X Series Panoramic W all T ouch Panels ( P ortrait W all Mount: FG5968-07 ; Landscape W all Mount: FG5968-13 ) are ideal for boar drooms, conferen ce rooms, or auditoriums where a panoramic contro l surface is needed to pro vid ...

  • AMX MXD-1000-NC - page 13

    Modero X Series® Touch Panels 7 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels MXD-1000 Specifications Power Requirements: PoE (Power over Ethernet), 802.3af, class 3 Power Consumption: • Full-On: 8W maximum • St andby: 3.2 W • Shutdown: 1 W F ront Panel Components: NFC T ransceiver: Antenna and transceiver for N ear Field Communica t ...

  • AMX MXD-1000-NC - page 14

    Modero X Series® Touch Panels 8 MXD/T-1000 10.1" Modero X Series® Touch Panels MXD-1000 Specific ations (Cont.) Communications (Cont.): Bluetooth: HID Profile v1.1, Keyboard/ Mouse Support, requires MXA-BT Bluetooth Adaptor . Video: S treaming/File Formats: MPEG-TS for MPEG2; HTTP for MJPEG Video Conferencing (Landscape Only): External appli ...

  • AMX MXD-1000-NC - page 15

    Modero X Series® Touch Panels 9 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Memory The MXD-1000 comes with 512 MB of SDRAM and 4 GB of Flash memory , neither of which can be upgraded. A maximum of 2.4 GB is a vailable to the u ser for projects. Basic Operation The MXD-1000 is operated using its inte gral touchscreen, as well as the Sleep ...

  • AMX MXD-1000-NC - page 16

    Modero X Series® Touch Panels 10 MXD/T-1000 10.1" Modero X Series® Touch Panels MXD/T-1000 Features Picture View By connecting a USB driv e via one of the de vice’ s USB ports (FIG. 3), Picture V iew allo ws the MXT -1000 to access JPEG images on that dri ve an d display them on the touchscreen (FIG. 7). I ndividual images may be accessed ...

  • AMX MXD-1000-NC - page 17

    Modero X Series® Touch Panels 11 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels 3. On the leftmost amber button, select between Rand (images display at random) and A-Z (images display in alphabetical order based on the name of the file ). 4. The four grey b uttons allo w scrolling thr ough sav ed images and the rate of display:  The P ...

  • AMX MXD-1000-NC - page 18

    Modero X Series® Touch Panels 12 MXD/T-1000 10.1" Modero X Series® Touch Panels Picture View Send Co mmand The ^PIC Send Command stops either mode of Picture V iew , or starts Pre vie w Mode. For more information, please refer to the Moder o X Series Pro gramming Guide , available at www .amx.com . Configuration The MXT -1000 and MXD-1000 ar ...

  • AMX MXD-1000-NC - page 19

    Installation 13 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Installation MXT-1000 Installation Any USB peripherals (mouse, ke yboard, et c.) may be connected to one of th e two USB ports on the rear of the dev ice (FIG. 9). Updates to the de vice’ s firmwa re are also made via the USB ports. The 5-pin Micro-USB port is used exclusi vely ...

  • AMX MXD-1000-NC - page 20

    Installation 14 MXD/T-1000 10.1" Modero X Series® Touch Panels T o disconnect and reconnect the MXT -1000’ s Ethernet cable to allo w use of a hole smaller than 1.00” in diameter: 1. On a soft surface, turn the MXT - 1000 face-do wn to access the bottom of the device. 2. Remov e the clamp holding the Ethernet cable (F IG. 11) until the Et ...

  • AMX MXD-1000-NC - page 21

    Installation 15 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Installing the MX D-1000 into a wall The MXD-1000 comes with a clear plastic backbox ( desi gned to attach the panel to most standard wall materials. This backbox has four locking tabs (two on top an d two on bottom) to help lock the backbox to the wall. These locking tabs are on ...

  • AMX MXD-1000-NC - page 22

    Installation 16 MXD/T-1000 10.1" Modero X Series® Touch Panels T o install the back box: 1. Prepare the area by removing any scre ws or nails fro m the drywall before begi nning the cutout process. 2. For best resu lts, use the MXD-1000 Installation T emplate ( 68-5968-03 ) to ensure proper placement (FIG. 15). The templa te is marked on one ...

  • AMX MXD-1000-NC - page 23

    Installation 17 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels 4. Thread the incoming Et hernet and Micro-USB wiri ng (if Micro-USB access is desired) from their terminal locations through the surface opening (FIG. 16 ). Leave enough slack in the wiring to accommodate any r e-pos itioning of the panel. 5. Remov e the back box knockouts (FIG. ...

  • AMX MXD-1000-NC - page 24

    Installation 18 MXD/T-1000 10.1" Modero X Series® Touch Panels 11 . T est the incoming wiring by attaching the panel conne ctions to their terminal locations and applying power . V erify that the panel is rece iv ing po wer a nd functioning properly to pre vent r epetition of the installation. 12. Latch the panel onto the top hooks on the bac ...

  • AMX MXD-1000-NC - page 25

    Installation 19 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels 13. Reconnect the terminal Ethe rnet and USB to their respecti ve loca tions on either the Ethernet port or NetLinx Master . Uninstalling the MXD-1000 The MXD-1000 is held in place to the back box via latch hooks and clips on the back box (FIG. 19), securing it to the mounting su ...

  • AMX MXD-1000-NC - page 26

    Installation 20 MXD/T-1000 10.1" Modero X Series® Touch Panels 2. W ith a stout, strong point (a push pi n or straightened paperclip, for e xample), carefully press into the access holes in either end of the molding (FI G. 21) until the snap is disconne cted. T o facilitate the disconnection, grasp the botto m of the panel (Landscape) or righ ...

  • AMX MXD-1000-NC - page 27

    Installation 21 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels ...

  • AMX MXD-1000-NC - page 28

    Installation 22 MXD/T-1000 10.1" Modero X Series® Touch Panels ...

  • AMX MXD-1000-NC - page 29

    Configuration and Programming 23 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Configuration and Programming Modero X Series Programming Guide Information on Settings pages, panel configur ation, a nd programming is included in the Moder o X Series Pr ogramming Guide , av ailable at www .amx.com . Programming the MXT -1 000 and MXD-1 000 re ...

  • AMX MXD-1000-NC - page 30

    Configuration and Programming 24 MXD/T-1000 10.1" Modero X Series® Touch Panels ...

  • AMX MXD-1000-NC - page 31

    Upgrading Firmware 25 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Upgrading Firmware Overview The latest f irmware (*.kit) f ile for eac h panel is a v ailable to do wnload from www .amx.com. T o download firmw are files, go to the catalog page for your panel t ype, and click the link under " Fi rmware Files " on the right side ...

  • AMX MXD-1000-NC - page 32

    Upgrading Firmware 26 MXD/T-1000 10.1" Modero X Series® Touch Panels 4. Eject or unmount the flash dri ve from the PC. Transfer the Fi rmware File From th e Flash Drive to the Tou ch Panel 1. Connect the USB Flash Driv e to one of the USB T ype A ports on th e panel. 2. Go to the Install Firmwar e setup page ( Configur ation->Admin->Ins ...

  • AMX MXD-1000-NC - page 33

    Upgrading Firmware 27 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Upgrading from Previous Firmware The MXT -1000 and MXD-1000 allow the optio n to rev ert the de vice to the pre vious f irmware run before an upgrade. T o upgrade the device from pre viously loaded firmw a re: 1. From the Settings page, select the Configur ation page. 2. Fr ...

  • AMX MXD-1000-NC - page 34

    Upgrading Firmware 28 MXD/T-1000 10.1" Modero X Series® Touch Panels Upgrading Firmware Via NetLinx Studio The MXT -1000 and MXD-1000 use an Ethe rnet connection for programming, firmw are updates, and touch panel file transfer via NetLinx Stu dio. If you ha ve access to the panel’ s netw ork, you may transfer f iles directly to the panel t ...

  • AMX MXD-1000-NC - page 35

    Upgrading Firmware 29 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels 5. Click the Edit Settings b utton on the Communications Settings dialog to open the V irtual NetLinx Master Settings dialog (FIG. 28). 6. W ithin this dialog, enter the Master System number . The default is 1 . 7. In the A vailable Connections section, click on the IP addr ...

  • AMX MXD-1000-NC - page 36

    Upgrading Firmware 30 MXD/T-1000 10.1" Modero X Series® Touch Panels Viewing devices on the Virtual System 1. After the Communication V erification dialog windo w ve rifies acti ve communication between the V irtual Master and the panel, click the OnLine T ree tab in the W orkspace windo w (FIG. 29) to view the de vices on the V irtual System ...

  • AMX MXD-1000-NC - page 37

    Upgrading Firmware 31 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels 4. Select the appropri ate Kit f ile from withi n the Br owse for F older window (FIG. 31). 5. Select the panel ’ s Kit file from the Files sectio n. 6. Enter the Device v al ue associated with the panel and the System number associat ed with the Master ( listed in the On ...

  • AMX MXD-1000-NC - page 38

    Upgrading Firmware 32 MXD/T-1000 10.1" Modero X Series® Touch Panels ...

  • AMX MXD-1000-NC - page 39

    Appendix: Troubleshooting 33 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Appendix: Troubleshooting Overview This section describes the solutions to possible hardware/firmware issues that could arise during the common operation of a Modero X touch panel. Panel Doesn’t Respond To Touche s Symptom: The de vice either does not respond to to ...

  • AMX MXD-1000-NC - page 40

    Appendix: Troubleshooting 34 MXD/T-1000 10.1" Modero X Series® Touch Panels ...

  • AMX MXD-1000-NC - page 41

    Appendix - Troubleshooting 35 MXD/T-1000 10.1" Modero X Series ® Touch Panels ...

  • AMX MXD-1000-NC - page 42

    10/2012 © 2012 AMX. All rights reserved. AMX and the AMX logo are register ed trademarks of AMX. AMX rese rves the right to alter specifica tions without notice at any time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support ? ...

Produzent AMX Kategorie Monitor

Dokumente, die wir vom Produzenten des Geräts AMX MXD-1000-NC erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen AMX
- Bedienungsanleitungen MXD-1000-NC
- Produktkarten AMX
- Informationsbroschüren
- oder Energieetiketten AMX MXD-1000-NC
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung AMX MXD-1000-NC.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen AMX MXD-1000-NC, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen AMX MXD-1000-NC. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts AMX MXD-1000-NC ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts AMX MXD-1000-NC, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von AMX MXD-1000-NC hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von AMX MXD-1000-NC verständlich ist.

Eine gänzliche Bedienungsanleitung von AMX sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von AMX MXD-1000-NC bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von AMX MXD-1000-NC befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich AMX MXD-1000-NC, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts AMX MXD-1000-NC - die uns die ersten Schritte während der Nutzung von AMX MXD-1000-NC erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit AMX MXD-1000-NC hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von AMX MXD-1000-NC im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich AMX MXD-1000-NC?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit AMX MXD-1000-NC nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit AMX MXD-1000-NC hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)