Bedienungsanleitung La Crosse Technology WT-2160

18 Seiten 0.32 mb
Download

Zur Seite of 18

Summary
  • La Crosse Technology WT-2160 - page 1

    1 Model: WT-2160 Radio-controlled Travel Alarm Clock Instruction Manual ...

  • La Crosse Technology WT-2160 - page 2

    2 TABLE OF CONTENTS Topic Page Inventory of Contents 1 Quick Setup 2 Detailed Setup Guide Battery Installation 3 About WWVB 4-6 Programming 6-8 Time zone 6 Daylight on/off 7 Snooze setting 7 Time setting 7-8 Setting Alarms 9-10 Operating Screens 11-12 Traveling 12 Troubleshooting 13 Maintenance, Warranty, Contact information 14-16 ...

  • La Crosse Technology WT-2160 - page 3

    1 INVENTORY OF CONTENTS 1. Radio controlled clock (figure 1 & 2) 2. Instruction Manual and Warranty Card. Figure 1: Open Figure 2: Closed ...

  • La Crosse Technology WT-2160 - page 4

    2 QUICK SETUP 1. The alarm clock is packed in the closed position. To open, grasp the two parts and slide the cover down (Figure 3). 2. The alarm clock includes a button cell battery in the battery compartment. Open up the compartment and remove the plastic insulating strip to activate. it will start searching for a signal and set to the correct ti ...

  • La Crosse Technology WT-2160 - page 5

    3 I. BATTERY INSTALLATION A. The battery is included in the clock with a plastic insulating strip that needs to be removed to activate the clock. 1. Using a coin, turn the battery cover slightly counter-clockwise. 2. Take off the cover; y ou may need to pry it off using a paperclip or other small object. 3. Remove the plastic from under the battery ...

  • La Crosse Technology WT-2160 - page 6

    4 II. PROGRAMMING A. SETTING THE TIME There are two methods by which the time and date can be set: 1) Automatically via WWVB reception, or 2) Manually. B. WWVB (Radio-Controlled Time) This method requires you to do nothing, except wait for the signal to be received, and to select a time zone. Reception usually takes approximately 6-10 minutes durin ...

  • La Crosse Technology WT-2160 - page 7

    5 minutes of battery installation, you may manually set the time or leave the time function alone (reception will occur regardless). About Radio Controlled Time signal, WWVB: The NIST (National Institute of Standards and Technology—Time and Frequency Division) WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time an ...

  • La Crosse Technology WT-2160 - page 8

    6 have created an international standard, measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum. C. PROGRAMMING (includes manual time setting) **To end the programming mode at any time, simply press the SNOOZE button a) Press the SET button. The US map and time zone will flash (“-5” is the default). The time zone is di ...

  • La Crosse Technology WT-2160 - page 9

    7 b) “DST On” will flash. Press the “+” key to toggle between the Daylight Saving Time ON or OFF (for places that do not follow Daylight Saving Time changes). Press the S ET key. c) “Sno” will show at the bottom of the screen, and a number will flash at the top. This is the setting for the length of the alarm snooze. Press the “ +” ...

  • La Crosse Technology WT-2160 - page 10

    8 f) The year will now flash. Press the “+” key to advance to the correct year. Press the SET key. g) The month will now flash. Press the “+” key to advance to the correct month. Press the SET key . h) The date will now flash. Press the “ +” key to advance to the correct day. Press the SET key. i) The day of the week will now flash (Sun ...

  • La Crosse Technology WT-2160 - page 11

    9 III. SETTING THE ALARMS La Crosse Technology’s tr avel alarm clock has two separate alarms that can be set. Each alarm has a distinctive sound and operate independently. A. Press and hold the “ALM1” (or “ALM2” key) key for two seconds to enter the setting mode. The alarm time will flash. Press the “HOUR” key to advance the hour of t ...

  • La Crosse Technology WT-2160 - page 12

    10 the “ALM1” or “ALM2” key once, depending on which alarm needs to be activated. C. When the alarm is s ounding, pressing the “SNOOZE” bar will turn it off for the time that was selected in the programming mode (section II.A.2.c.). If the setting is “0”, the alarm will turn off for 24 hours. During the snooze period, the lower scre ...

  • La Crosse Technology WT-2160 - page 13

    11 IV. OPERATING SCREENS A. The exact time will always be displayed in the upper portion of the screen, and the US map will show when the time zone is set to the continental US (with the tim e zone selected showing in black). The lower portion of the screen has five different screens that can be selected. The default is “DAY, MONTH, DATE” as sh ...

  • La Crosse Technology WT-2160 - page 14

    12 4. ALARM 1 TIME 5. ALARM 2 TIME C. While in non-alarm mode, pressing the “SNOOZE” bar will show the “ALARM1” and “ALARM2” briefly in the lower section. V. TRAVELING A. When traveling, it will only be necessary to change to the appropriate time zone. Please note that the clock will only search for a signal when it is set between “GM ...

  • La Crosse Technology WT-2160 - page 15

    13 TROUBLESHOOTING NOTE: For problems not solved, please contact La Crosse Technology via e-mail or phone, or visit our website, www.lacrossetechnology.com Problem: The time and date will not set initially. Solution: It usually takes overnight before the clock can receive the signal due to the interference the sun has on the WWVB signal. Wait overn ...

  • La Crosse Technology WT-2160 - page 16

    14 MAINTENANCE AND CARE INSTRUCTIONS • Extreme temperatures, vibration, and shock should be avoided to prevent damage to the unit. • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings. • Do not submerge in water. • Do not subject the units to unnecessary heat or c ...

  • La Crosse Technology WT-2160 - page 17

    15 SPECIFICATIONS Dimensions: (L x W x H) 2-1/2” x 5/8” x 3-5/8” (62 x 15 x 93 mm). Battery LR44 Alkaline Button Battery life Approximately 1 year WARRANTY INFORMATION La Crosse Technology provides a 1-y ear warranty on this alarm clock. Contact L a Crosse Technology im m ediately upon discover y of any defects covered by this warranty. Befor ...

  • La Crosse Technology WT-2160 - page 18

    16 THIS ALARM CLOCK. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH. This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages ther efore t ...

Produzent La Crosse Technology Kategorie Clock Radio

Dokumente, die wir vom Produzenten des Geräts La Crosse Technology WT-2160 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen La Crosse Technology
- Bedienungsanleitungen WT-2160
- Produktkarten La Crosse Technology
- Informationsbroschüren
- oder Energieetiketten La Crosse Technology WT-2160
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung La Crosse Technology WT-2160.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen La Crosse Technology WT-2160, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen La Crosse Technology WT-2160. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts La Crosse Technology WT-2160 ansehen.

Die komplette Bedienungsanleitung des Geräts La Crosse Technology WT-2160, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von La Crosse Technology WT-2160 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von La Crosse Technology WT-2160 verständlich ist.

Eine gänzliche Bedienungsanleitung von La Crosse Technology sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von La Crosse Technology WT-2160 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von La Crosse Technology WT-2160 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich La Crosse Technology WT-2160, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts La Crosse Technology WT-2160 - die uns die ersten Schritte während der Nutzung von La Crosse Technology WT-2160 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit La Crosse Technology WT-2160 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von La Crosse Technology WT-2160 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich La Crosse Technology WT-2160?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit La Crosse Technology WT-2160 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit La Crosse Technology WT-2160 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)