-
Broilmaster BHAX-1 - page 1
Page 1 B uil t -i n K it O wner ’ s M anual BHa-1, BHaX-1, BBa-1, Bsa-1, BDa-1 anD BrB-1 K its O utDOOr G rill M OuntinGs F Or use witH P3, r3, H3 Or t3 s eries B rOilMaster P reMiuM G as G rills GAS-FIRED r et ain O wner ’ s M anual FOr F uture r eFerence . n Ote : ul c ertiFica tiOn eXtenDs Onl y tO tHe PrODuct , nOt tHe inst alla tiOn OF tHe ...
-
Broilmaster BHAX-1 - page 2
Page 2 B101502-3-1012 iMPOrt ant w e aDvise yOu tO careFull y reaD anD FOllOw tHe instructiOns in tHis O wner ’ s M anual BeFOre inst allinG Or usinG yOur new B rOilMaster ® B uil t -i n K it . w Hen inst alleD anD useD as recOMMenDeD , yOur Buil t - in Kit will OFFer years OF cOOKinG sa tisF actiOn . t He inst aller sHOulD Present yOu witH tHis ...
-
Broilmaster BHAX-1 - page 3
Page 3 B101502-3-1012 t aBle OF c Ontents Location, Connections, and Safety ................................................................................................ 3 - 4 Enclosure Construction Guidelines .................................................................................................... 5 BHA & BHAX Grill Surround .... ...
-
Broilmaster BHAX-1 - page 4
Page 4 B101502-3-1012 l Oca tiOn , c OnnectiOns , anD s aFety Built-In Kit Location Built-In Kits are designed for outdoor use ONL Y . This Built-In Kit is designed for use with all P3 and T3 Model Broilmaster ® gas grills and cannot be used with any other grill or in any other capacity . Never install or operate your Built-In Kit in any building, ...
-
Broilmaster BHAX-1 - page 5
Page 5 B101502-3-1012 e nclOsure c OnstructiOn G uiDelines Enclosure must be construction from non-combustible material. If tile is used on the top surface of your enclosure, it may be necessary to enlarge openings at the top edges to allow the frame pieces of the BHA and BSA to mount ush against the enclosure. Screws for enclosure mounting have ...
-
Broilmaster BHAX-1 - page 6
Page 6 B101502-3-1012 BHa-1 & BHaX-1 G rill s urrOunD K its i nst alla tiOn i nstructiOns nOtice: r eFer tO tHe B uil t -i n K it e nclOsure c OnstructiOn G uiDe On P aGe 5 FOr PrOPer DiMensiOns OF tHe OPeninG FOr tHe BHa-1 G rill s urrOunD K it ...
-
Broilmaster BHAX-1 - page 7
Page 7 B101502-3-1012 BHa-1 & BHaX-1 G rill s urrOunD e XPlODeD v iew & P arts l ist V erify that all parts listed on the exploded view of this manual have been included in this Built-In Kit before beginning installation. Caution: Use caution when handling parts, as they may contain sharp edges. Work gloves are recommended to prevent injury ...
-
Broilmaster BHAX-1 - page 8
Page 8 B101502-3-1012 BHa & BHaX a sseMBl y Attention: If applicable, remove protective lm from parts before installation. 1. Remove the surround from the shipping box and place the BHA surround into position in the constructed enclosure. See Figure 1. 2. Secure the BHA surround to the enclosure using eight (8) 8 x 3/4” Hex Head Screw scre ...
-
Broilmaster BHAX-1 - page 9
Page 9 B101502-3-1012 8. Check for gas leaks as discussed in the “Checking for Gas Leaks” Section of this manual on page 4. 9. Open control housing and connect ex line to the main valve, then close the control housing door . Figure 8. 6. After insuring that all the contents are removed from the inside of the grill, install the grill in the B ...
-
Broilmaster BHAX-1 - page 10
Page 10 B101502-3-1012 10. Install each of the four vent covers (BRB V ent Register Kit) into the Built-In Kit Enclosure using two #8 x 3/4” screws. See Figure 9. BHa & BHaX a sseMBl y Figure 9 Figure 10 Alternate Match Lighting Instructions 1. Turn the burner control knobs clockwise to the OFF position. 2. Turn ON gas at the source. 3. Open ...
-
Broilmaster BHAX-1 - page 11
Page 1 1 B101502-3-1012 BBA-1 T ANK C ADDY INST ALLA TION INSTRUCTIONS T HE BBA T ANK C ADDY IS DESIGNED T O BE USED AS EITHER AN ENCLOSURE FOR A PORT ABLE PROP ANE T ANK OR A GARBAGE RECEPT ACLE . P LEASE REFER TO THE APPROPRIA TE SECTIONS OF THIS MANUAL FOR PROP ANE T ANK REQUIREMENTS , CONNECTIONS , AND SAFETY . nOtice: r eFer tO tHe B uil t -i ...
-
Broilmaster BHAX-1 - page 12
Page 12 B101502-3-1012 BBa t anK c aDDy e XPlODeD v iew anD P arts l ist 1 2 3 VERIFY THA T ALL P ARTS LISTED IN THE EXPLODED VIEW ON THIS P AGE HA VE BEEN INCLUDED IN THIS BUIL T -IN KIT BEFORE BEGINNING THIS INST ALLA TION. CAUTION: USE CAUTION WHEN HANDLING P ARTS, AS THEY MA Y CONT AIN SHARP EDGES. WORK GLOVES ARE RECOMMENDED TO PREVENT INJUR Y ...
-
Broilmaster BHAX-1 - page 13
Page 13 B101502-3-1012 BBA T ANK C ADDY I NST ALLA TION Recommended T ools: Phillips Screw Driver or an electric screw driver . Make sure BBA T ank Caddy opening dimensions match those in FIGURE 1. Place the BBA Frame Assembly in the Built-In Enclosure. Secure the BBA Frame to the Enclosure with eight (8) 8 x 3/4” Hex Head screws as shown in FIGU ...
-
Broilmaster BHAX-1 - page 14
Page 14 B101502-3-1012 Lower the BBA Door Assembly onto the two hinge pins inside the lower left and right sides of the BBA Frame. FIGURE 4 . ENCLOSURE REQUIREMENTS The enclosure design must be constructed to allow only storage of the LP cylinder in use thus preventing storage of a second cylinder . T ank caddy must be provided for use in the enclo ...
-
Broilmaster BHAX-1 - page 15
Page 15 B101502-3-1012 T HE BSA S IDE B URNER S URROUND IS DESIGNED TO BE USED WITH THE DP ASBC N A TURAL and P ROP ANE G AS S IDE B URNER ONL Y . D O NOT USE ANY OTHER SIDE BURNER WITH THE BSA S IDE B URNER S URROUND . BSA-1 SIDE BURNE r surrOunD Kit I NST ALLA TION I NSTRUCTIONS nOtice: r eFer tO tHe B uil t -i n K it e nclOsure c OnstructiOn G u ...
-
Broilmaster BHAX-1 - page 16
Page 16 B101502-3-1012 Bsa s iDe B urner s urrOunD e XPlODeD v iew anD P arts l ist All repair part orders should be placed through your local Broilmaster ® dealer . T o locate a dealer in your area, contact Broilmaster ® Customer Service at 800-851-3153 • www .broilmaster .com. T o ensure prompt and accurate service, please provide the followi ...
-
Broilmaster BHAX-1 - page 17
Page 17 B101502-3-1012 1 3 Bsa i nst alla tiOn F IGURE 1 F IGURE 3 Make sure BSA Side Burner Surround opening dimensions match those in FIGURE 1. Place the BSA Liner into the Enclosure and check for proper hole alignment. Secure the BSA Liner to the Enclosure with four (4) 8 x 3/4” Hex Head screws. Y ou should use the inside holes located on the ...
-
Broilmaster BHAX-1 - page 18
Page 18 B101502-3-1012 T HE BDA S INGLE D OOR KIT IS DESIGNED TO BE USED IN AN ISLAND OR OTHER APPLICA TION. BDa-1 sinGle/DOuBle DOOr Kit I NST ALLA TION I NSTRUCTIONS nOtice: r eFer tO tHe B uil t -i n K it e nclOsure c OnstructiOn G uiDe FOr PrOPer DiMensiOns OF tHe OPeninG FOr tHe BDa-1 s inGle /D OuBle D OOr K it ...
-
Broilmaster BHAX-1 - page 19
Page 19 B101502-3-1012 BDa s inGle D OOr e XPlODeD v iew anD P arts l ist All repair part orders should be placed through your local Broilmaster ® dealer . T o locate a dealer in your area, contact Broilmaster ® Customer Service at 800-851-3153 • www .broilmaster .com. T o ensure prompt and accurate service, please provide the following informa ...
-
Broilmaster BHAX-1 - page 20
Page 20 B101502-3-1012 2 1 3 BDa s inGle D OOr i nst alla tiOn FIGURE 1 FIGURE 3 Make sure BDA Single Door opening dimensions match those in FIGURE 2. Place the Frame into the opening and check for proper hole alignment. Secure the Frame to the grill enclo sure with eight (8) 8 x 3/4” Hex Head Screw screws. FIGURE 3. Recommended T ools: Phillips ...
-
Broilmaster BHAX-1 - page 21
Page 21 B101502-3-1012 BDA D OUBLE D OOR I NST ALLA TION FIGURE 6 1 Remove doors from frames by depressing one of the spring loaded pins on each door and set them aside . Disassemble frame by removing the two screws and door pin from both door frames as shown in FIGURE 5. 27 ½” 19 13/16” Use the door brackets included in the hardware packages ...
-
Broilmaster BHAX-1 - page 22
Page 22 B101502-3-1012 The BRB V ent Register Kit is designed to be used with any enclosure that has an LP tank. BRB-1 VENT REGISTER KIT I NST ALLA TION I NSTRUCTIONS nOtice: r eFer tO tHe B uil t -i n K it e nclOsure c OnstructiOn G uiDe FOr PrOPer DiMensiOns OF tHe OPeninG FOr tHe BrB-1 v ent r eGister K it ...
-
Broilmaster BHAX-1 - page 23
Page 23 B101502-3-1012 BrB v ent r eGister c Over K it e XPlODeD v iew anD P arts l ist All repair part orders should be placed through your local Broilmaster ® dealer . T o locate a dealer in your area, contact Broilmaster ® Customer Service at 800-851-3153 • www .broilmaster .com. T o ensure prompt and accurate service, please provide the fol ...
-
Broilmaster BHAX-1 - page 24
Page 24 B101502-3-1012 LIMITED W ARRANTY Manufactured in U.S.A. by Broilmaster , a Division of Empire Comfort Systems, Inc., P .O. Box 529, Belleville, Illinois 62222. WHA T IS COVERED AND FOR HOW LONG From the date these kits are purchased for use, Broilmaster will make available, at our factory , a free replacement for any defective part covered ...
-
Broilmaster BHAX-1 - page 25
Page 25 B101502-3-1012 n Otes ...
-
Broilmaster BHAX-1 - page 26
Page 26 B101502-3-1012 n Otes ...
-
Broilmaster BHAX-1 - page 27
Page 27 B101502-3-1012 n Otes ...
-
Broilmaster BHAX-1 - page 28
Page 28 B101502-3-1012 T HE M OST D URABLE G RILL K NOWN T O M AN BROILMASTER ® A Division of Empire Comfort Systems, Inc. 918 Freeburg Ave. Belleville, Illinois 62220 Phone: 1-800-851-3153 F AX: 1-800-443-8648 VISIT OUR WEB SITE A T WWW .broilmaster .com ...
Haben Sie eine Frage bezüglich Broilmaster BHAX-1?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Broilmaster BHAX-1 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Broilmaster BHAX-1 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.