Bedienungsanleitung Black Box IC187C

36 Seiten 0.13 mb
Download

Zur Seite of 36

Summary
  • Black Box IC187C - page 1

    CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mail order: Black Box Corporation , 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com AUGUST 20 ...

  • Black Box IC187C - page 2

    1 FCC AND IC ST A TEMENTS FEDERAL COMMUNICA TIONS COMMISSION AND INDUSTR Y CANADA RADIO FREQUENCY INTERFERENCE ST A TEMENTS This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication ...

  • Black Box IC187C - page 3

    2 2-POR T RS-232/422/485 PCI HOST ADAPTER EUROPEAN UNION DECLARA TION OF CONFORMITY Products bearing the CE Label fulfill the requirements of the EMC directive (89/336/EEC) and of the low-voltage directive (73/23/EEC) issued by the European Commission. To obey these directives, the following European standards must be met: • EN55022 Class A - “ ...

  • Black Box IC187C - page 4

    3 NOM ST A TEMENT NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY ST A TEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias ...

  • Black Box IC187C - page 5

    4 2-POR T RS-232/422/485 PCI HOST ADAPTER 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos ...

  • Black Box IC187C - page 6

    5 T ABLE OF CONTENTS CONTENTS 1. Specifications............................................................................................7 2. Introduction .............................................................................................8 2.1 Overview ..................................................................................... ...

  • Black Box IC187C - page 7

    6 2-POR T RS-232/422/485 PCI HOST ADAPTER CONTENTS (continued) Appendix C: Electrical Interfaces ...............................................................28 C.1 RS-232 .................................................................................................28 C.2 RS-422 ................................................................. ...

  • Black Box IC187C - page 8

    7 CHAPTER 1: Specificatiobns 1. Specifications Communication Chip — IC133C-R2: 16550 UART (optionally, you can remove this UART and install a 16950 UART for better performance); IC187C: 16950 UART Data Rate — IC133C-R2: Up to 460.8 kbps; IC187C: 460.8 kbps and above Distance — Up to 4000 ft. (1219.2 m) Number of Ports — (2) RS-232/422/485 C ...

  • Black Box IC187C - page 9

    8 2-POR T RS-232/422/485 PCI HOST ADAPTER 2. Introduction 2.1 Overview The 2-Port RS-232/422/485 PCI Host Adapter is a two-channel PCI-bus serial I/O adapter for PCs and compatibles that supports data rates up to 460.8 kbps. It has two very versatile asynchronous serial ports: They are field-selectable as either RS-232 ports (suitable for communica ...

  • Black Box IC187C - page 10

    9 CHAPTER2: Introduction 2.3 Factory Default Settings The Adapter’s factory-default settings are as follows: T able 2-1. Factor y-Default Settings Port # Electrical Specification Port 1 RS-232 Port 2 RS-232 For your reference, record installed Adapter settings below. T able 2-2. Installed Adapter Settings Port # Electrical Specification Port 1 Po ...

  • Black Box IC187C - page 11

    10 2-POR T RS-232/422/485 PCI HOST ADAPTER 3. Card Setup NOTE In all cases J1x refers to settings for the first port and J2x refer to settings for the second port. 3.1 RS-485 Enable Modes RS-485 is ideal for multidrop or network environments. RS-485 requires a tri-state driver that will allow the electrical presence of the driver to be removed from ...

  • Black Box IC187C - page 12

    11 CHAPTER 3: Card Setup Examples on the following pages describe all of the valid settings for J1B and J2B. Interface Mode Examples J1D – J4D Figure 3-1. Headers J1B and J2B set for RS-422. Figure 3-2. Headers J1B and J2B set for RS-485 “Auto” with “No Echo.” Figure 3-3. Headers J1B and J2B set for RS-485 “Auto” with “Echo.” AT R ...

  • Black Box IC187C - page 13

    12 2-POR T RS-232/422/485 PCI HOST ADAPTER Figure 3-4. Headers J1B and J2B set for RS-485 “RTS” with “No Echo.” Figure 3-5. Headers J1B and J2B set for RS-485 “RTS” with “Echo.” 3.2 Address and IRQ selection The Adapter is automatically assigned I/O addresses and IRQs by your motherboard BIOS. Only the I/O address may be modified by ...

  • Black Box IC187C - page 14

    13 CHAPTER 3: Card Setup T able 3-1. Jumper Operation Name Function P Adds or removes the 1K-ohm pull-down resistor in the RS-422/RS-485 receiver circuit (Receive data only). T Adds or removes the 120-ohm termination. L Connects the TX+ to RX+ for RS-485 two-wire operation. L Connects the TX- to RX- for RS-485 two-wire operation. Figure 3-6. Header ...

  • Black Box IC187C - page 15

    14 2-POR T RS-232/422/485 PCI HOST ADAPTER 3.4 Electrical Interface Selection Each port on the Adapter has the ability to be used in either RS-232 or RS-422/485 mode. This is selectable via four 24 pin DIP-shunts at E1-E4. Please use the following illustration to aid in the configuration of your electrical interface. Figure 3-7. Headers E1 through ...

  • Black Box IC187C - page 16

    15 CHAPTER 3: Card Setup 3.5 Clock Modes The Adapter employs a clocking option that allows you to select from “divide by 4,” “divide by 2,” and “divide by 1” clocking modes. These modes are selected at Headers J1C through J4C. To select the baud rates commonly associated with COM ports (for example, 2400, 4800, 9600, and 19,200 bps, and ...

  • Black Box IC187C - page 17

    16 2-POR T RS-232/422/485 PCI HOST ADAPTER To enable the Adapter to reach its maximum possible data rate, 460.8 Kbps, place the jumper in the “divide by 1” position (marked DIV1). Figure 3-10. Clocking mode “divide by 1.” 3.6 Baud Rates and Divisors for the “Div1” Mode The following table shows some common data rates and the rates you s ...

  • Black Box IC187C - page 18

    17 CHAPTER 3: Card Setup If your communications package allows the use of baud-rate divisors, choose the appropriate divisor from the following table: T able 3-3. Divisors for the “Div 1” Mode For this Data Rate Choose this Divisor 1200 bps 384 2400 bps 192 4800 bps 96 9600 bps 48 19.2 kbps 24 38.4 kbps 12 57.6 kbps 8 115.2 kbps 4 230.4 kbps 2 ...

  • Black Box IC187C - page 19

    18 2-POR T RS-232/422/485 PCI HOST ADAPTER 3.7 Baud Rates and Divisors for the “Div2” mode The following table shows some common data rates and the rates you should choose to match them if you’re using the adapter in the “Div2” mode. T able 3-4. Baud Rates for the “Div 2” Mode For this Data Rate Choose this Baud Rate 1200 bps 600 bps ...

  • Black Box IC187C - page 20

    19 CHAPTER 3: Card Setup T able 3-5. Divisors for the “Div 2” Mode For this Data Rate Choose this Divisor 1200 bps 192 2400 bps 96 4800 bps 48 9600 bps 24 19.2 kbps 12 38.4 kbps 8 57.6 kbps 4 115.2 kbps 2 230.4 kbps 1 ...

  • Black Box IC187C - page 21

    20 2-POR T RS-232/422/485 PCI HOST ADAPTER 4. Installation IMPOR T ANT You MUST set up the operating system BEFORE you physically install the Card. 4.1 Setting Up the Operating System If you are installing the PCI adapter in DOS, OS/2 ® , or QNX, please refer to the appropriate directory on one of the Serial Utilities Disks for instructions. 4.1.1 ...

  • Black Box IC187C - page 22

    21 CHAPTER 4: Installation 5. Next, double-click on the third I/O range. Highlight the entire I/O range and type 02e8–02ef for COM4. Again, Windows will inform you that you have made modifications that may affect other devices. Click OK. Following these steps will change the COM: number assignments on the first two ports to COM3 and COM4. 4.1.3 W ...

  • Black Box IC187C - page 23

    22 2-PORT RS-232/422/485 PCI HOST ADAPTER 5. T roubleshooting 5.1 The Serial Utility Diskette The Adapter comes with a Serial Utility Diskette that has diagnostic software on it. We recommend that you always use this software first when you troubleshoot problems, because it can help resolve most common problems related to software and operating-sys ...

  • Black Box IC187C - page 24

    23 CHAPTER 5: Troubleshooting 5.2 Calling Black Box If you determine that the Adapter is malfunctioning, do not attempt to alter or repair it . It contains no user-serviceable parts. Contact Black Box Technical Support at 724-746-5500. Before you do, make a record of the history of the problem. We will be able to provide more efficient and accurate ...

  • Black Box IC187C - page 25

    24 2-POR T RS-232/422/485 PCI HOST ADAPTER Appendix A: Interrupt Handling A.1 The Purpose and Early History of Interrupts A good analogy of a PC interrupt would be the phone ringing. The phone “bell” is a request for us to stop what we are currently doing and take up another task (speak to the person on the other end of the line). This is the s ...

  • Black Box IC187C - page 26

    25 APPENDIX A: Interrupt Handling A.2 Why Use an Interrupt Status Port (ISP)? The answer to the polling inefficiency was the Interrupt Status Port (ISP). The ISP is a read-only 8-bit register that sets a corresponding bit when an interrupt is pending. Port 1’s interrupt line corresponds with bit D0 of the status port, Port 2’s with D1, etc. The ...

  • Black Box IC187C - page 27

    26 2-POR T RS-232/422/485 PCI HOST ADAPTER Appendix B: Connector Pinouts B.1 RS-232 T able B-1. Pinout of Connector Set to RS-232 Abbreviation Name Pin # Mode TD Transmit Data 3 Output RTS Request To Send 7 Output DTR Data Term Ready 4 Output GND Ground 5 RD Receive Data 2 Input DCD Data Carrier Detect 1 Input DSR Data Set Ready 6 Input CTS Clear T ...

  • Black Box IC187C - page 28

    27 APPENDIX B: Connector Pinouts B.2 RS-422/485 T able A-2. Pinout of Connector Set to RS-422/485 Abbreviation Name Pin # Mode GND Ground 5 TX + Transmit Data Positive 4 Output TX- Transmit Data Negative 3 Output RTS+ Request To Send Positive 6 Output RTS- Request To Send Negative 7 Output RX+ Receive Data Positive 1 Input RX- Receive Data Negative ...

  • Black Box IC187C - page 29

    28 2-POR T RS-232/422/485 PCI HOST ADAPTER Appendix C: Electrical Inter faces C.1 RS-232 Quite possibly the most widely used communication standard is RS-232. This implementation has been defined and revised several times and is often referred to as EIA/TIA-232. The IBM PC/AT computer defined the RS-232 port on a 9-pin D-subminiature connector, and ...

  • Black Box IC187C - page 30

    29 APPENDIX C: Asynchronous Communications C.3 RS-485 RS-485 is backward-compatible with RS-422; however, it is optimized for partyline or multidrop applications. The output of the RS-422/485 driver is capable of being Active (enabled) or Tristate (disabled). This capability allows multiple ports to be connected in a multidrop bus and selectively p ...

  • Black Box IC187C - page 31

    30 2-POR T RS-232/422/485 PCI HOST ADAPTER Appendix D: Asynchronous Communication In serial data communication, individual bits of a character are transmitted consecutively to a receiver that assembles the bits back into a character. Data rate, error checking, handshaking, and character framing (start/stop bits) are pre- defined and must correspond ...

  • Black Box IC187C - page 32

    31 APPENDIX D: Asynchronous Communication Because each bit in asynchronous communications is sent consecutively, it is easy to generalize asynchronous communications by stating that each character is wrapped (framed) by pre-defined bits to mark the beginning and end of the serial transmission of the character. The data rate and communication parame ...

  • Black Box IC187C - page 33

    32 2-PORT RS-232/422/485 PCI HOST ADAPTER Appendix E: Board Layout Figure E-1. Board layout. GD75232 U1 GD75232 U2 75175 U4 E5 C1 C3 R4 R5 R8 R9 R3 R5 R7 C4 U5 U6 C6 J1 C7 R27 R28 C8 C9 U7 C10 R29 R30 C12 C1 1 93CS46 R1 C13 C14 C15 C16 C17 J2C Y1 R8 U8 P1 PCI9050 XC9536-7201 7201 + MADE IN USA DIV1 DIV2 DIV4 DIV1= DIVIDE BY 1 DIV2= DIVIDE BY 2 DIV4 ...

  • Black Box IC187C - page 34

    NOTES ...

  • Black Box IC187C - page 35

    NOTES ...

  • Black Box IC187C - page 36

    1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746 © Copyright 2000. Black Box Corporation. All rights reserved. ...

Produzent Black Box Kategorie Computer Hardware

Dokumente, die wir vom Produzenten des Geräts Black Box IC187C erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Black Box
- Bedienungsanleitungen IC187C
- Produktkarten Black Box
- Informationsbroschüren
- oder Energieetiketten Black Box IC187C
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Black Box IC187C.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Black Box IC187C, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Black Box IC187C. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Black Box IC187C ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Black Box IC187C, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Black Box IC187C hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Black Box IC187C verständlich ist.

Eine gänzliche Bedienungsanleitung von Black Box sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Black Box IC187C bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Black Box IC187C befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Black Box IC187C, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Black Box IC187C - die uns die ersten Schritte während der Nutzung von Black Box IC187C erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Black Box IC187C hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Black Box IC187C im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Black Box IC187C?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Black Box IC187C nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Black Box IC187C hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)