-
Sears 270-3250 - page 1
5.5 HP 2 Stage Snow Thrower SKU #270-3250 Owner's Manual DO NOT RETURN TO STORE Questions? Problems? Please call our customer help line: (888) 315-3080 M-F 84 CT IMPORTANT: PLEASE READ THIS ENTIRE MANUAL BEFORE USING THIS SNOW THROWER. Thank you for purchasing a Yardworks ® snow thrower. This manual provides information regarding the setup, o ...
-
Sears 270-3250 - page 2
TABLE OF CONTENTS GENERAL SAFETY PROCEDURES ........................................................................ 3 PACKAGE CONTENTS ....................................................................................... 6 SNOW THROWER COMPONENTS ......................................................................... 7 ENGINE COMPONENTS ...... ...
-
Sears 270-3250 - page 3
GENERAL SAFETY PROCEDURES Please familiarizeyourself with the following safety symbols andwords: The safety alert symbol A is used with one of the safety words (DANGER, CAUTION, or WARNING) to alert you to hazards. Please pay attention to these hazard notices both in this manual and on the snow thrower. DANGER: Indicates a hazard that will result i ...
-
Sears 270-3250 - page 4
A WARNING: Foreign objects entering the auger or impeller can create clogs, jams, projectiles, and other dangerous conditions. • Do not use in the path of wires, doormats, snow toys, or other foreign objects. • If the snow thrower intakes a foreign object, stop the engine, wait for the auger and impeller to stop rotating, and inspect the snow t ...
-
Sears 270-3250 - page 5
A WARNING: In addition to the above warnings please note the following precautions that should be followed when operating this or ANY machine. • Read all manuals and warning labels before using a machine. • Never operate a machine with any guard or cover removed. • Remove all adjusting keys and wrenches before use. • Do not allow children o ...
-
Sears 270-3250 - page 6
PACKAGE CONTENTS Your snow thrower comes with the items listed below. Please check to see that all of the following items are included with your snow thrower. O If you are missing components DO NOT RETURN TO STORE, please call (888) 315-3080 M-F 8-5 CT for customer service. ITEM LIST Handle Snow thrower assembly & Chute rotation Chute assembly ...
-
Sears 270-3250 - page 7
SNOW THROWER COMPONENTS Please familiarize yourself with the locations and functions of the various components and controls of the snow thrower. 2 3 4 5 t0 7 (internal) (1) Drive Control- Drives the snow thrower at the pre-selected speed and direction when depressed. (2) Handle- Hold the snow thrower here when using. (3) Auger Control- Rotates ...
-
Sears 270-3250 - page 8
ENGINE COMPONENTS Please familiarize yourself with the locations and functions of the various components and controls of the engine portion of the snow thrower. 9 10 (1) Recoil Starter Handle- Pull-cord for starting engine. (2) Throttle Lever- Use to control engine speed. This should be set to the highest speed when using the snow thrower. (3) Fuel ...
-
Sears 270-3250 - page 9
ASSEMBLY In order to best protect the snow thrower while in the package, this product comes with some components disassembled. Please complete the following assembly steps before proceeding to use the snow thrower. For ease of assembly, we recommend attaching the components in the order listed in this manual. If after reading this section, you are ...
-
Sears 270-3250 - page 10
NOTE: For easiest assembly, we recommend not attaching the lower bolt of each handle bracket until after assembling the chute rotationhandle, auger anddrive handle cables, anddrive speed control lever. Figure 2- Handle Assembly Attaching Drive Speed Control Lever To attach the drive speed control lever, slide it through the drive speed selection ho ...
-
Sears 270-3250 - page 11
Chute Rotation Handle To attach the chute rotation handle: 1. Remove the handle grip from the handle by removing the screw at the end (see figure 4). 2. Slide the end of the chute rotation handle, with the grip removed, through the eye hole on the snow thrower handle as shown in figure 4 a. 3. Slide the other end of the chute rotation handle throug ...
-
Sears 270-3250 - page 12
NOTE: When attaching the cables, be sure they are properly threaded through the main handle. The auger control cable should fit through the hole next to the speed selector. The drive control cable should fit in the handle groove on the other side of the speed selector. C TIGHTEN b Figure 5- Cable attachment 12 ...
-
Sears 270-3250 - page 13
PREPARING THE SNOW THROWER FOR USE _ The following section describes steps you must follow to prepare the snow thrower for use. If after reading this section, you are unsure about how to perform any of the steps please call (888) 315-3080 M-F 8-5 CT for customer service. Failure to perform these steps properly can damage the snow thrower or shorten ...
-
Sears 270-3250 - page 14
5. Remove the oil filler cap again and inspect the attached dipstick. Oil should now be visible on the stick. Ifoil is not visible on the stick, you may need to add more oil and repeat steps 4 and 5. 6. Replace the oil filler cap and screw tightly. NOTE: Even if you have previously measured 21 ounces ofoil, some spillage is common when adding oil t ...
-
Sears 270-3250 - page 15
IMPORTANT: • Never use an oil/gasoline mixture. • Never use old gas. • Avoid getting dirt or water in the fuel tank. • Gas can age in the tank and make it hard to start up the snow thrower in the future. Never store the snow thrower for extended periods of time with fuel in the tank. Adjust Skid Shoes Adjustment of the skid shoes governs th ...
-
Sears 270-3250 - page 16
OPERATION _ Before starting the snow thrower, make sure you have read and performed the steps in the "Preparing the Snow Thrower for Use" section of this manual. If you are unsure about how to perform any of the steps in this manual please call (888) 315- 3080 M-F 8-5 CT for customer service. Starting the Snow Thrower To start up the snow ...
-
Sears 270-3250 - page 17
5. Pull on the recoil starter handle slowly until a slight resistance is felt (see figure 10) then pull quickly to start the engine. Return cord gently into the machine. Never allow the cord to snap back. 6. If engine fails to start, repeat step 5. NOTE: After repeated attempts to start the engine, please consult the troubleshooting guide before at ...
-
Sears 270-3250 - page 18
You can adjust the drive speed and direction using the drive speed control lever. Be sure to release both the auger control handle and the drive control handle before adjusting the drive speed control lever. As you use the snow thrower, you may want to adjust the chute outlet direction. Be sure to release both the auger control handle and the drive ...
-
Sears 270-3250 - page 19
STOPPING THE SNOW THROWER When you are finished using the snow thrower, perform the following steps to shut it down: 1. 2. . 4. 5. Move the snow thrower away from any snow piles. Run the auger and impeller for 30 seconds to clear any remaining snow inside the snow thrower. Set the engine switch to the "off' position. This will stop the mo ...
-
Sears 270-3250 - page 20
MAINTENANCE/CARE Proper routine maintenance of the snow thrower will help prolong its life. Please perform maintenance checks and operations according the schedule in figure 14. If you have questions about any of the maintenance procedures listed in this manual, please call (888) 315-3080 M-F 8-5CT. CAUTION: Never perform maintenance operations whi ...
-
Sears 270-3250 - page 21
Clearing Auger or Impeller Jams A WARNING: The auger and impeller rotate at fast speeds that can cause damage or even amputation to body parts. Even if you do not see the auger or impeller rotating, they may start at any time if the engine is running. • Always turn off the engine before attempting to clear any clogs or jams. • Keep hands and fe ...
-
Sears 270-3250 - page 22
. that performs well in cold conditions. The telnperamre conditions and recommended oil grade will vary by geographic area. Once you have ensured the engine oil level is correct, replace the oil filler cap and screw tightly. Figure 16- Removing oil filler cap Figure 17- Proper oil level Rephtcing the Oil TIMELINE: You should drain and replace the o ...
-
Sears 270-3250 - page 23
After you have drained the dirty oil, refill the crankcase with fresh auto motor oil. To fill the crankcase, perform the steps listed in the "Checking/Adding Oil" portion of this MAINTENANCE section. NOTE: Never dispose of used motor oil in the trash or down a drain. Please call your local recycling center or auto garage to arrange oil di ...
-
Sears 270-3250 - page 24
Spark Plug Maintenance TIMELINE: Every 100 hours or as needed. The spark plug is important for proper engine operation. A good spark plug should be intact, free of deposits, and properly gapped. To inspect your spark plug: 1. Pull on the spark plug cap to remove it. 2. Unscrew the spark plug from the engine using the spark plug wrench included with ...
-
Sears 270-3250 - page 25
7. Replace the bolt on the carburetor. 8. Store the emptied gasoline in a suitable place. _k CAUTION: Do not store fuel from one season to another. A[k CAUTION: Never pour gasoline down a drain or in a gutter. Call your local authorities to dispose of gas properly. Figure 22- Draining gas from the carburetor Adjusdng Drh,e and Auger Cables TIMELINE ...
-
Sears 270-3250 - page 26
Replacing Shear Pins A WARNING: The auger and impeller rotate at fast speeds that can cause damage or even amputation to body parts. Even if you do not see the auger or impeller rotating, they may start at any time if the engine is running. • Always turn off the engine before attempting to clear any clogs or jams. • Keep hands and feet away fro ...
-
Sears 270-3250 - page 27
SPECIFICATIONS Snow Thrower Clearing Width Throwing Distance Chute Rotation Wheel Drive Speeds Dimensions Dry Mass Engine 22 Inches Max. 50 feet 180 degrees Pneumatic, tubeless, size 4.10-6 N.H.S. Forward: 0.9, 1.2, 1.5, 1.8, 2.5 MPH Reverse: 0.9, 1.2 MPH L = 35.5" W = 24.5" H = 31.5" 158 Lbs Engine Type Ignition System Fuel Tank Cap ...
-
Sears 270-3250 - page 28
Auger or impeller does not rotate Snow is not thrown or not thrown very far Snow thrower will not drive or drives poorly _,uger drive handle s not depressed _,uger drive handle sable is loose Foreign substance slogging auger or mpeller Shear pin broken Belt broken or loose Impeller or chute is slogged Shute deflector is set too low Drive handle is ...
-
Sears 270-3250 - page 29
b_ 79 100 99 ÷ 9 8 6 36 / / i4 10 r_ !05 9O ...
-
Sears 270-3250 - page 30
SNOW THROWER PARTS LIST Part # 1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 17 18 19 2O 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 4O 41 42 43 44 45 46 47 48 49 5O 51 52 53 54 55 Part Description _andle assembly _uger and chive conr_ot handles _ubber cap _8x50 He..: scre'_ s _8 hex imts Ftmlbuckte 2able _peed co1_tml frame _6x35 Hex scre ...
-
Sears 270-3250 - page 31
@ @ ...
-
Sears 270-3250 - page 32
PART # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 ENGINE PARTS LIST PART DESCRIPTION _LANGE BOLT ( M6'12 ) _EAD COVER COMP _tEAD COVER PACKING BREATHER TUBE _IVOT ADJUSTING NUT ROCKER AR_M PIVOT ROCKER AKI _IVOT BOLT ( M8 ) VALVE ROTATOR N VALVE SPRING RETAINER EX ...
-
Sears 270-3250 - page 33
45 _'LANGE BOLT ( M6'16 ) 1 46 :AN COVER COMP 1 47 ENGINE STOP SWITCH ASSY 1 48 _COIL STARTER ASSY 1 49 _'LANGE BOLT ( M6'8 ) 3 50 ._TAKE PIPE GASKET 1 51 2ARBETRETOR INSULATING PLATE 1 96 E'ONTROL ASSY 1 97 £HROTTLE RETURN SPRLNG 1 98 3OVERNOR ROD 1 99 _O7EI_NOR SPRING ] 100 .)UADRATE BOLT ( M6 ) 1 101 2ONTROL ARM 1 33 ...
-
Sears 270-3250 - page 34
LIMITED WARRANTY FOR YARDWORKS _'s_ SNOW THROWER Remember to save your receipt and to accurately fill out and mail your product registration card. You must provide proof of purchase for all warranty work. This Yardworks ": snow thrower is warranted to be free from defects in materials and workmanship for a period of two (2) year from date ...
Haben Sie eine Frage bezüglich Sears 270-3250?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Sears 270-3250 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Sears 270-3250 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.