Deutsch dropdown-ico

Bedienungsanleitung NEC NP1000

40 Seiten 2.77 mb
Download

Zur Seite of 40

Summary
  • NEC NP1000 - page 1

    1 2 4 5 6 7 1. What Y ou Can Do with User Supportware 3 2. Operating Environment 4. Attaching LAN Card 5. Setting the LAN Setting of Projector 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP:Ad Hoc connection) 7. Refer to “User’ s Guide” and Help Install in the PC the software stored in the User Supportwa ...

  • NEC NP1000 - page 2

    Introduction Thank you for purchasing the NEC projector NP2000/NP1000 (hereafter referred to as the “ projector ” ). The projector is equipped with the following features so that you can give ef fective presentations. • LAN port (RJ-45), USB port (type A), PC card slot (TYPE II) supplied as standard • Viewer that displays images from a flas ...

  • NEC NP1000 - page 3

    1 Cautions on Usage • A wireless LAN card is not meant for use with facilities or equipment involving the safeguard of human life, such as medical equipment, nuclear facilities or equipment, aeronautical or space equipment, transportation facilities or equipment, etc., or with facilities or equipment requiring high levels of reliability . Do not ...

  • NEC NP1000 - page 4

    2 Contents Contents Introduction ................................................................................ Inside cover Cautions on Usage ........................................................................................ 1 Contents ......................................................................................................... ...

  • NEC NP1000 - page 5

    3 1. What Y ou Can Do with User Supportware 3 What Y ou Can Do with User Supportware 3 1 1. What Y ou Can Do with User Supportware 3 1-1. Image Express Utility 2.0 Image Express Utility 2.0 is a software tool used to send the screen of your personal computer to the projector via a network, without the signal cables. ● High-speed, high-quality ima ...

  • NEC NP1000 - page 6

    4 1. What Y ou Can Do with User Supportware 3 ● Projected images can be transferred and saved to personal computers. When “ Meeting Mode ” is used, projected images can be sent to the personal computers of all the participants (attendants) of a “ Meeting ” . The received images can be saved to your personal computer with a memo (text data ...

  • NEC NP1000 - page 7

    5 1. What Y ou Can Do with User Supportware 3 What Y ou Can Do with User Supportware 3 1 1-2. Desktop Control Utility 1.0 Desktop Control Utility 1.0 is software that operates the desktop screen of a personal computer at a remote location from the projector by using a network. ● A commercially available USB mouse is connected to the projector to ...

  • NEC NP1000 - page 8

    6 1. What Y ou Can Do with User Supportware 3 1-3. Ulead Photo Explorer 8.0 SE Basic Ulead Photo Explorer 8.0 SE Basic (hereafter referred to as “ Ulead Photo Explorer 8.0 ” ) is a multimedia image file management tool developed by Ulead Systems, Inc. This tool has functions to capture images from a digital camera or scanner and to process or e ...

  • NEC NP1000 - page 9

    7 1. What Y ou Can Do with User Supportware 3 What Y ou Can Do with User Supportware 3 1 1-4. V iewer PPT Converter 3.0 Viewer PPT Converter 3.0 is software that converts files created with PowerPoint 95/97/ 2000/ 2002/2003 into an index file that can be displayed with the viewer function of the projector . ● When converting, specify a flash memo ...

  • NEC NP1000 - page 10

    8 2. Operating Environment 2. Operating Environment 2-1. Supported Projector User Supportware 3 supports the following NEC projector (as of February 2006) NP2000/NP1000 L T380/L T280 NP Series L T Series Reference Some of software can be used with projectors other than the above projectors. For details, refer to the help function of each software. ...

  • NEC NP1000 - page 11

    9 2 2. Operating Environment Operating Environment 2-2. Operating Environment The following is the operating environment for Image Express Utility 2.0. For the operating environment of other software, please refer to the help function of each software. Windows 2000 Prof essional Ser vice Pac k 4 or later Windows XP Home Edition Service Pac k 2 or l ...

  • NEC NP1000 - page 12

    10 3. Connecting LAN Cable 3. Connecting LAN Cable Connect a LAN cable to the LAN port (RJ-45) of the projector when connecting the projector to wired LAN. After connecting LAN cable to the projector , set the required settings for the projector ( page 24). LAN Server HUB, etc. LAN cable (commercially available) ...

  • NEC NP1000 - page 13

    11 4. Attaching Wireless LAN Card Attaching Wireless LAN Card 4 4. Attaching Wireless LAN Card Insert the wireless LAN card into the PC card slot on the rear panel of the projector . Important • The wireless LAN card must be inserted into the PC card slot in the correct direction. It cannot be inserted in the reverse direction. If the card is ins ...

  • NEC NP1000 - page 14

    12 4. Attaching Wireless LAN Card ■ Removing card from PC card slot 1 Press POWER ON/STAND BY button to set the projector to Stand-by mode, press the “ O (off) ” side of the main power switch of the projector . 2 Slowly press the PC card eject button. The PC card eject button will slightly come forward. 3 Slowly press the PC card eject button ...

  • NEC NP1000 - page 15

    13 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 5. Setting the LAN Setting of Projector Reference For how to turn on/off the power to the projector and how to operate the buttons and remote control of the projector , refer to “ User ’ s Manual ” included in the User ’ s Manual CD-ROM. 5-1. Displaying On-Scr ...

  • NEC NP1000 - page 16

    14 5. Setting the LAN Setting of Projector 4 Press the button three times to highlight the “ Installation ” tab. 5 Press the SELECT  button three times to highlight “ LAN Mode ” , and press the button. The “ LAN Mode ” screen will be displayed. • T o make setting of wireless LAN Proceed to “ 5-2. Wireless LAN ” ( next page). ? ...

  • NEC NP1000 - page 17

    15 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 5-2. Wireless LAN When inserting the wireless LAN card into the PC card slot of the projector , configure the LAN settings in the “ PC Card ” page of “ LAN Mode ” selected from On-Screen Menu. ■ Flow of Setting Setting of "Network T ype". Select SS ...

  • NEC NP1000 - page 18

    16 5. Setting the LAN Setting of Projector ■ Setting Wireless LAN 1 Display the “ PC Card ” page of “ LAN Mode ” . Configure the setting of wireless LAN in the "PC Card ” page of “ LAN Mode ” selected from On-Screen Menu. <1> In the “ LAN Mode ” setting window , if the “ Built-in ” tab is highlighted, press the bu ...

  • NEC NP1000 - page 19

    17 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 3 Set “ DHCP ” . Check this check box if the network to which the projector is to be connected automatically assigns the IP address via the DHCP server . <1> Press the SELECT  button once to highlight the “ DHCP ” check box and press the button. A che ...

  • NEC NP1000 - page 20

    18 5. Setting the LAN Setting of Projector 5 Input “ Subnet Mask ” . If “ DHCP ” is not checked, input the subnet mask of the network to which the projector is connected. The method of inputting is the same as that of the “ IP Address ” field. 6 Input “ Gateway ” . If “ DHCP ” is not checked, input the default gateway of the net ...

  • NEC NP1000 - page 21

    19 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 9 Select SSID from “ Site Survey ” (if necessary). A list of SSID that can be connected to wireless LAN in this place are displayed, and the SSID that are to be connected are selected from this list. When SSID is selected from the list, the “ SSID ” field, “ ...

  • NEC NP1000 - page 22

    20 5. Setting the LAN Setting of Projector 11 Select “ Mode ” (if necessary). The communication mode of the SSID selected in “ Site Survey ” are automatically selected. The settings can be changed by moving the highlight to the “ Mode ” field and pressing the button. • “ Infrastructure ” .............. This is selected if communic ...

  • NEC NP1000 - page 23

    21 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 13 Select “ WEP ” page (if necessary). Proceed to step 17 if WEP is not set. <1> Use the SELECT  /  button to select the “ Network T ype ” tab, and press the button to highlight the “ WEP ” tab. The “ WEP ” page will be displayed. 14 Select ...

  • NEC NP1000 - page 24

    22 5. Setting the LAN Setting of Projector 16 Input “ Key 1 ” to “ Key 4 ” . If “ 64 bit ” , “ 128 bit ” , or “ 152 bit ” is selected from “ WEP ” , input an encryption key . Set the same encryption key as the access point and personal computer to be connected by the wireless LAN. Four types of keys can be input for WEP . Au ...

  • NEC NP1000 - page 25

    23 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 17 Finalize “ Advanced ” . <1> Use the SELECT  /  button to highlight [OK] and press the button. The “ PC card ” page will be displayed again. 18 Reconnect the network. <1> Use the SELECT  /  button to highlight “ Reconnect ” and pr ...

  • NEC NP1000 - page 26

    24 5. Setting the LAN Setting of Projector 5-3. Wired LAN When connecting a LAN cable to the LAN port of the projector , configure the LAN settings in the “ Built-in ” page of “ LAN Mode ” selected from On-Screen Menu. ■ Flow of setting 1 3 Step Display "Built-in" page of "LAN Mode". 4 Step Input "IP Address" ...

  • NEC NP1000 - page 27

    25 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 ■ Setting Wired LAN 1 Display the “ Built-in ” page of “ LAN Mode ” . Configure the setting of wired LAN in the “ Built-in ” page of “ LAN Mode ” selected from On-Screen Menu. If “ LAN Mode ” is not displayed, refer to “ 5-1. Displaying On-Scre ...

  • NEC NP1000 - page 28

    26 6. Setting the LAN Setting of Personal Computer 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP: Ad Hoc connection) This section explains the procedure for Ad Hoc connection of wireless LAN between the personal computer and projector , by using the wireless network setting function with Windows XP Service Pa ...

  • NEC NP1000 - page 29

    27 Setting the LAN Setting of Personal Computer 6. Setting the LAN Setting of Personal Computer 6 3 Right-click the [Wireless Network Connection] icon and click [Property]. 3 -2 3 -1 Right-click Click A property window for wireless network connections will be displayed. 4 From the list of [This connection uses the following Items:], select (click) ...

  • NEC NP1000 - page 30

    28 6. Setting the LAN Setting of Personal Computer 5 Click [Use the following IP address:], and input [IP address]and[Subnet mask]. • If, for example, the [IP address] and [Subnet mask] of the projector are set as show in “ Example of settings for projector ” on page 26, set the personal computer as shown below . • Example of setting the IP ...

  • NEC NP1000 - page 31

    29 Setting the LAN Setting of Personal Computer 6. Setting the LAN Setting of Personal Computer 6 9 Right-click the [Wireless Network Connection] icon and click [V iew A vailable Wireless Networks]. 9 -1 Right-click 9 -2 Click The “ Wireless Network Connection ” window is displayed. 10 From the list, select SSID of the projector to be connected ...

  • NEC NP1000 - page 32

    30 6. Setting the LAN Setting of Personal Computer 11 Input WEP key to set up an encryption key and click [Connect]. • Input an encrypiton key of “ WEP ” . Enter “ NECVT ” in the Network key box, for example, if you have the WEP setting on the projector side configured with “ 64bit ” and have “ NECVT ” input as Key 1. • The same ...

  • NEC NP1000 - page 33

    31 Refer to “ User ’ s Guide ” and Help 7. Refer to “ User ’ s Guide ” and Help 7 7. Refer to “ User ’ s Guide ” and Help Each software program in User Supportware 3 contains each help file that explains the functions and operation methods in detail. Also, “ User ’ s Guide ” (PDF) explains the basic operation procedure of ea ...

  • NEC NP1000 - page 34

    32 7. Refer to “ User ’ s Guide ” and Help Reference If the above menu is not displayed, follow these steps. 1. Click [Start] of Windows. 2. Click [Run...]. 3. In the [Open:] field, enter the CD-ROM drive name *1 (e.g., “ Q: ” ) followed by “ SETUP .EXE ” (e.g., “ Q:SETUP .EXE). *1 The CD-ROM drive name will vary depending on your ...

  • NEC NP1000 - page 35

    33 Refer to “ User ’ s Guide ” and Help 7. Refer to “ User ’ s Guide ” and Help 7 7-2. Using Help The functions and operation of each software are described on the Help screen. This section introduces how to display and use the Help screen. Note • The following instructions use operations under Windows XP as an example. • Before dis ...

  • NEC NP1000 - page 36

    34 7. Refer to “ User ’ s Guide ” and Help 34 ■ Displaying Ulead Photo Explorer 8.0 Help T o display the Help of Ulead Photo Explorer 8.0, start the software and make your selection from the [Help] menu. 1 Click [All Programs] in the start menu → [Ulead Photo Explorer 8.0 SE Basic] → [Ulead Photo Explore 8.0 SE Basic], in that order . T ...

  • NEC NP1000 - page 37

    35 MEMO ...

  • NEC NP1000 - page 38

    36 MEMO ...

  • NEC NP1000 - page 39

    • IBM and PC/A T are registered trademarks of International Business Machines Corporation. • Microsoft, Windows, PowerPoint, MS, MS-DOS, and DirectX are registered trademarks or trademarks of Microsoft Corporation in the U.S. or other countries. • Ulead Systems and Photo Explorer are registered trademarks of Ulead Systems, Inc. • Adobe, Ado ...

  • NEC NP1000 - page 40

    NEC Pr ojector User Supportwar e 3 ■ Image Express Utility 2.0 ■ Desktop Control Utility 1.0 ■ Ulead Photo Explorer 8.0 SE Basic ■ Viewer PPT Converter 3.0 ■ PC Control Utility 3.0 NP2000 / NP1000 Wired and Wireless Network Setup Guide Printed on Recycled Paper 7N8P6581 ...

Produzent NEC Kategorie Projector

Dokumente, die wir vom Produzenten des Geräts NEC NP1000 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen NEC
- Bedienungsanleitungen NP1000
- Produktkarten NEC
- Informationsbroschüren
- oder Energieetiketten NEC NP1000
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung NEC NP1000.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen NEC NP1000, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen NEC NP1000. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts NEC NP1000 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts NEC NP1000, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von NEC NP1000 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von NEC NP1000 verständlich ist.

Eine gänzliche Bedienungsanleitung von NEC sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von NEC NP1000 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von NEC NP1000 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich NEC NP1000, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts NEC NP1000 - die uns die ersten Schritte während der Nutzung von NEC NP1000 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit NEC NP1000 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von NEC NP1000 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich NEC NP1000?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit NEC NP1000 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit NEC NP1000 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)