Bedienungsanleitung Schumacher 10000A

16 Seiten 0.16 mb
Download

Zur Seite of 16

Summary
  • Schumacher 10000A - page 1

    Fully Automatic Microprocessor Controlled Battery Charger with Engine St arter plus Battery T ester CAUTION: Read all Safety Rules and Operating Instructions, and follow them with each use of this product. 0099000530/0605 OWNER’S MANUAL Schumacher Electric Corporation Mount Prospect, IL 60056 U.S.A. Model 10000A For 6 and 12-V olt Batteries Send ...

  • Schumacher 10000A - page 2

    2 PLEASE SAVE THIS OWNER’S MANUAL AND READ BEFORE EACH USE. Model 10000A, Fully Automatic Battery Charger/T ester and Engine S tarter , offers features to accommodate the needs for home or light commercial use. This manual will explain how to use the battery charger safely and effectively . Please read and follow these instructions and precaution ...

  • Schumacher 10000A - page 3

    3 IMPORT ANT SAFETY INSTRUCTIONS • WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. • Read all instructions and cautions printed on t ...

  • Schumacher 10000A - page 4

    4 Never place charger directly above battery being charged. The gases from the battery will corrode and damage the charger. Never touch the battery clamps together when the charger is on. You could cause a spark. Never operate charger if it has received a hard blow, been dropped, or otherwise damaged. Take it to a qualified profes- sional for inspe ...

  • Schumacher 10000A - page 5

    5 BEFORE USING YOUR BA TTER Y CHARGER It is important to understand the charger’s requirements. This section explains the charger ’s electrical requirement s and how to prepare a battery for charging. PLUGGING IT IN Y our charger requires a 120V AC receptacle installed according to all local codes and ordinances. USING AN EXTENSION CORD The use ...

  • Schumacher 10000A - page 6

    6 OPERA TING INSTRUCTIONS IMPORT ANT : Follow all safety instructions and precautions when charging your battery . Wear complete eye protection and clothing protection. Charge your battery in a well-ventilated area. heavy, unpainted metal part of the chassis or engine block, away from the battery (see figure above). DO NOT connect clamp to negative ...

  • Schumacher 10000A - page 7

    7 1. Note the polarity of the battery posts by checking the identification marks on the battery: POSITIVE (POS, P or +) and NEGATIVE (NEG, N or -). The positive post is usually larger than the negative post. 2. Attach at least a 24-inch-long, 6- gauge (AWG), insulated battery cable to NEGATIVE (NEG, N or -) battery post. Rock and twist the clamp ba ...

  • Schumacher 10000A - page 8

    8 CHARGER CONTROL DISPLAY MODE SWITCH Use this switch to set the function of the digital LED to one of the following. • BATTERY %: The digital LED displays an estimate of the percent of charge of the battery connected to the charger battery clamps. • VOLTAGE: The digital LED displays the voltage at the charger battery clamps in DC volts. CHARGE ...

  • Schumacher 10000A - page 9

    9 CONTROL P ANEL GUIDE 10000A CONTROL PANEL GUIDE MODE OF OPERATION C h a r g e d C h a r g i n g C h e c k B a t t e r y % V o l t a g e 2 A 1 5 A 4 0 A 1 0 0 A S t a r t 1 2 V R e g u l a r 1 2 V D e e p - C y c l e 1 2 V A G M , G e l 6 V R e g u l a r Digital Display Initial power-up, battery not detected O O O 0.0 No battery or reversed batter ...

  • Schumacher 10000A - page 10

    10 USING THE BUIL T -IN BA TTER Y TESTER OVERVIEW This battery charger has a built-in battery tester that displays either an accurate battery voltage or an estimate of the battery’s relative charge based on the battery voltage and the Battery Council International scale. TESTING SEQUENCE There are four basic steps required to use the 10000A as a ...

  • Schumacher 10000A - page 11

    11 OVERVIEW The 10000A has an engine start function that can be used to jump start your vehicle if the battery is low by providing 100 amps of current to assist engine cranking. STARTING SEQUENCE There are a few basic steps involved when using the engine start function. 1. Connect the charger battery clamps to the battery or charging system. Be sur ...

  • Schumacher 10000A - page 12

    12 USING YOUR BA TTER Y CHARGER OVERVIEW Using this battery charger is very simple. First, connect the battery and AC power following the precautions listed under “OPERA TING INSTRUCTIONS”. Then select the appropriate BA TTERY TYPE and CHARGE RA TE for your battery . The charger will then do everything automatically . This section explains a fe ...

  • Schumacher 10000A - page 13

    13 Read this entire manual before using your charger . The tips below serve only as a guide for specific situations. CHARGING TIPS If your vehicle won’t start : Y ou don’t need to fully charge a battery to start your vehicle. If the charger won’t start your vehicle using the 100A ST ART rate, try charging the battery using the 40A rate for 10 ...

  • Schumacher 10000A - page 14

    14 BA TTER Y PERCENT AND CHARGE TIME This charger adjusts the charging time in order to charge the battery com- pletely , efficiently and safely . The microprocessor automatically makes the necessary decisions. However , this section includes guidelines that can be used to estimate charging times. The duration of the charging process depends on thr ...

  • Schumacher 10000A - page 15

    15 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION The battery is connected The charger is in tester Press the CHARGE RA TE and the charger is on, mode, not charger mode. button to activate charging but it isn’t charging. and select a charge rate. Indicator lights are lit in an Y ou might have Make sure nothing is erratic manner not accidentally ...

  • Schumacher 10000A - page 16

    16 LIMITED W ARRANTY SCHUMACHER ELECTRIC CORPORA TION, 801 BUSINESS CENTER DRIVE, MOUNT PROSPECT , ILLINOIS 60056-2179 MAKES THIS LIMITED W ARRANTY T O THE ORIGINAL PURCHASER A T RET AIL OF THIS PRODUCT . THIS LIMITED WARRANTY IS NOT TRANSFERABLE. Schumacher Electric Corporation warrants this battery charger for five years from date of purchase at ...

Produzent Schumacher Kategorie Battery Charger

Dokumente, die wir vom Produzenten des Geräts Schumacher 10000A erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Schumacher
- Bedienungsanleitungen 10000A
- Produktkarten Schumacher
- Informationsbroschüren
- oder Energieetiketten Schumacher 10000A
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Schumacher 10000A.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Schumacher 10000A, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Schumacher 10000A. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Schumacher 10000A ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Schumacher 10000A, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Schumacher 10000A hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Schumacher 10000A verständlich ist.

Eine gänzliche Bedienungsanleitung von Schumacher sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Schumacher 10000A bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Schumacher 10000A befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Schumacher 10000A, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Schumacher 10000A - die uns die ersten Schritte während der Nutzung von Schumacher 10000A erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Schumacher 10000A hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Schumacher 10000A im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Schumacher 10000A?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Schumacher 10000A nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Schumacher 10000A hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)