Bedienungsanleitung Panasonic WV-CW504SK

44 Seiten 3.53 mb
Download

Zur Seite of 44

Summary
  • Panasonic WV-CW504SK - page 1

    Before attempting to connect or operate this pr oduct, please read these instructions carefully and save this manual for futur e use. The model number is abbreviated in some descriptions in this manual. This illustration repr esents WV -CW504F . Installation Guide Color CCTV Camera Model No. WV -CW504F , WV -CW504FK WV -CW504S, WV -CW504SK ...

  • Panasonic WV-CW504SK - page 2

    2 CA UT IO N: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrow- head symbol, within an equilat- eral triangle, is intended to alert the user to the presence of uninsulated ...

  • Panasonic WV-CW504SK - page 3

    3 Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Clean only with dry cloth. 6) Do not block any ventilation openings. Install in accordance with the manufacturer's instruc- tions. 7) Do not install near any heat sources such as radiators, heat registers ...

  • Panasonic WV-CW504SK - page 4

    4 Limitation of liability THIS PUBLICA TION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED W ARRANTIES OF MERCHANT ABILITY , FITNESS FOR ANY P ARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD P ARTY’S RIGHT . THIS PUBLICA TION COULD INCLUDE TECHNICAL INACCURACIES ...

  • Panasonic WV-CW504SK - page 5

    5 Contents Important safety instructions ......................................................................................................... 3 Limitation of liability ....................................................................................................................... 4 Disclaimer of warranty ................................ ...

  • Panasonic WV-CW504SK - page 6

    6 Pr eface This product is a 1/3-inch type {1/3"} CCD color CCTV camera. Connection of this product to a video monitor allows users to use this product as a monitoring camera.  • WV -CW504F:Thisisamodelwithx2varifocallens.Mountingbracketandceilingmountbrack - et are optional.  • WV -CW5 ...

  • Panasonic WV-CW504SK - page 7

    7 About the user manuals T rademarks and register ed trademarks The operating instructions of the camera consist of 2 sets: this book and Operating Instructions (PDF). This book explains how to install the camera. Refer to the "Operating Instructions (PDF)" on the provided CD-ROM for descriptions of how to perform the unit settings. Adobe ...

  • Panasonic WV-CW504SK - page 8

    8 Pr ecautions The following points as well as the con- tents of "W arning" and "Caution" shall be observed. Refer installation work to the dealer . Installation work requir es technique and experi- ences. Otherwise injury , or damage to the product may r esult. Be sure to consult the dealer . Do not insert objects inside the pr ...

  • Panasonic WV-CW504SK - page 9

    9 [Precautions for use] This product has no power switch. T urn the power off when cleaning the pr oduct. T o keep on using with stable performance Parts of this product may deteriorate and it may shorten the lifetime of this product when using in locations subject to high temperatures and high humidity . (Recommended operating temperature: +35 °C ...

  • Panasonic WV-CW504SK - page 10

    10 Pr ecautions for Installation Installation work shall be performed in accordance with the technology standar d of the electric installation. The product is designed to be installed under eaves. Keep the product out of dir ect sunlight. Installing place Contact your dealer for assistance if you are unsure of an appropriate place in your particu- ...

  • Panasonic WV-CW504SK - page 11

    11 Mounting screws  • The screws and bolts must be tightened with an appropriate tightening tor que according to the material and strength of the installation area.  • Do not use an impact driver . Failure to observe this may cause overtightening and consequently damage to the screws.  ...

  • Panasonic WV-CW504SK - page 12

    12 Major operating contr ols and their functions q Power cord * This illustration shows the camera without the inner dome. w Video output cable e Enclosure r Panning table !8 ABF operation indicator Operation buttons !7 Heater output connector o Zoom lock knob i Focus lock knob t Tilt adjusting table y Tilting lock screw u Panning lock screw !0 Cam ...

  • Panasonic WV-CW504SK - page 13

    13 q Power cord w Video output cable e Enclosure r Panning table Rotate this table to adjust the panning angle of the camera. t Tilt adjusting table Adjust the azimuth angle of the image. y Tilting lock screw Locks the tilt position. u Panning lock screw Fixes the panning table. i Focus lock knob Locks the focal point. o Zoom lock knob Locks ...

  • Panasonic WV-CW504SK - page 14

    14 Connector Lens Mounting (WV -CW504FK, WV -CW504SK) 1. Before mounting the lens, r emove the protection sheet fr om the camera. 2. Mount the optional lens to the camera by turning the lens clockwise. Connector 3. Insert the connector of lens into the connector of the camera. ...

  • Panasonic WV-CW504SK - page 15

    15 Pr eparations When installing the camera on a wall or a ceiling, there are two methods as specified below . ( + Next page)  • Usingatwo-gangjunctionbox  • UsingthemountingbaseWV -Q115 Refer to all work related to the installation of this product to qualified service personnel or system installer .  •? ...

  • Panasonic WV-CW504SK - page 16

    16 Using a two-gang junction box  • When the camera is installed using the two-gang junction box, mount the camera attachment (accessory) to the embedded box installed on the wall or ceiling as a first step. Note: • For wall mounting: Installation shall be performed in such a manner that " M ...

  • Panasonic WV-CW504SK - page 17

    17 z Install the mounting base on the wall/ceiling. Note:  • Only the same type of holes, A or B , shall be used for mounting. B B B A A A 51 mm {2"} ø27 mm {1-1/16"} Cable access hole Center of mounting base Female thread for conduit WV -Q115 (For use of the hole A ) (For use of the hole B ) 138 mm {5-7/16" ...

  • Panasonic WV-CW504SK - page 18

    18 x Previously run the cables fr om the wall or ceiling through the cable access hole. c Mount the attachment onto the mount bracket. Recommended tightening torque: 0.78 N·m {0.58 lbf·ft} Camera attachment FRONT TOP Note: • For wall mounting: Installation shall be performed in such a manner that " M TOP" of the camera attachment face ...

  • Panasonic WV-CW504SK - page 19

    19 Camera installation z Mount the camera. <T o mount the camera on a two-gang junction box> q Connect the power cord and the video output cable. ( + page 30) w Align the "OPEN" mark of the camera with the protrusion of the camera attachment. e Engage the attachment mounting screw of the camera with the camera mounting hole of the c ...

  • Panasonic WV-CW504SK - page 20

    20 <T o use the mounting base> q Attach the camera onto the camera attachment while aligning the "OPEN" mark of the camera with the projection of the camera attachment. Important:  • When mounting the camera body , cables shall be run between the camera attachment and mounting base as indicated by the ar ...

  • Panasonic WV-CW504SK - page 21

    21 w Engage the attachment mounting screw of the camera with the camera mounting hole of the camera attachment and rotate the camera in the direction of the arrow to the "LOCK" position to secur e the camera to the camera attachment without any back- lash. e Connect the power cor d and the video output cable at the side of the mounting ba ...

  • Panasonic WV-CW504SK - page 22

    22 t Mount the supplied base cover on the mounting base. Important:  • T o pr event the cables from being caught when the base cover is attached, keep the cables inside the cable guide. y Use the bit for tamperproof screw (acces- sory) to tighten the fixing screws provided on both sides of the base cover . (Recommended ...

  • Panasonic WV-CW504SK - page 23

    23 x Remove the enclosure and inner dome from the main body by loos- ening the three fixing scr ews. Loosen the three fixing screws by using the provided bit for tamperpr oof screw . Detach the inner dome while pushing the parts with the "PUSH" indication. Important:  • Do not hold the inner dome when carrying ...

  • Panasonic WV-CW504SK - page 24

    24 Adjust the camera z Be sure to view the monitor for adjustment when the camera angle is adjusted. Connect the monitor for adjustment (e.g. a small LCD) to the monitor output connector , and adjust the camera angle. When determining the camera angle, repeat fine follow the adjusting procedur e of q , w , and e shown below . q Loosen the panning l ...

  • Panasonic WV-CW504SK - page 25

    25 x Adjusts the focus. Focus adjustment shall be performed when camera angle adjustment are performed. Adjust the focus by following the adjusting proce- dure of q , w , and e shown below . q Loosen the zoom lock knob and move the knob between TELE and WIDE to obtain the appro- priate angle of view , and then tighten the zoom lock knob. w Loosen t ...

  • Panasonic WV-CW504SK - page 26

    26 v T o perform fine adjustment of the back focus after the ABF operation indicator goes off and automatic back focus is adjusted, use the right or left button. Note:  • Nooperationfor10secondsormoreautomaticallyclearsthefocuspositionindicator .  • T o change the angle of view? ...

  • Panasonic WV-CW504SK - page 27

    27 b Mount the enclosure and inner dome. T ighten the screws that have been loos- ened in Step 2 in page 23 using the sup- plied driver bit. (Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}) Important:  • Attach the inner dome in accordance with the lens direction to not to change the lens direction.  • ...

  • Panasonic WV-CW504SK - page 28

    28 W aterproof treatment for the cable joint sections Adequate waterproof treatment is required for the cables when the camera with exposed cables is installed by means of the mounting base WV -Q115 or it is installed under the eaves. The camera body is waterproof, but the cable ends ar e not waterproof. Be sure to use the supplied butyl tape at th ...

  • Panasonic WV-CW504SK - page 29

    29 Important:  • Ifopenwiringisconducted,besuretouseconduitsandrunthecablesinsidethetubestopro - tect the cables from dir ect sunlight.  • When the conduit is connected at the lateral or bottom position, either of the arrow marks on ...

  • Panasonic WV-CW504SK - page 30

    30 Make a connection Cautions:  • ONL YCONNECTWV -CW504TO24VACOR12VDCCLASS2POWERSUPPL Y .  • Besuretoconnectthegr oundingleadtotheGNDterminal. * When using 12 V DC power suppl y , the optional heater unit is unavailable. T o 24 V AC/12 V DC* power supply V ideo ...

  • Panasonic WV-CW504SK - page 31

    31 • Cord length and wir e gauge 24 V AC The recommended cord length and copper wire size ar e shown in the table for refer ence. The voltage supplied to the camera should be between 19.5 V AC and 28 V AC. Recommended wire gauge for 24 V AC line. Copper wire size (AWG) #24 (0.22 mm 2 ) #22 (0.33 mm 2 ) #20 (0.52 mm 2 ) #18 (0.83 mm 2 ) Length of ...

  • Panasonic WV-CW504SK - page 32

    32 Optional Heater Unit WV -CW5H (option) Installing the heater unit enables the camera to operate in a low-temperature environment below –30 °C {–22 °F}. The heater tur ns on automatically when the temperature inside the camera drops below +10 °C {50 °F} and tur ns off when the temperature rises. A small fan inside the unit will mini- mize ...

  • Panasonic WV-CW504SK - page 33

    33 About the setup menus Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the conditions of the camera shooting ar ea. Refer to the operating instructions (PDF) for further information. Setup menu list Setup item Description CAMERA ID This item spec ...

  • Panasonic WV-CW504SK - page 34

    34 Setup item Description SPECIAL CHROMA GAIN Adjusts the chroma level. AP GAIN Adjusts the aperture level. PEDEST AL Adjusts the pedestal (brightness) level. HUE Adjusts the chroma phase (hue) level. PIX OFF Corrects image defects such as flaws. CAMERA RESET Restor es the settings in the setup menu to the default settings. SER.NO. Displays the ser ...

  • Panasonic WV-CW504SK - page 35

    35 Screenshot 2 The setup mode changes to "ENABLE", and the setup menu becomes ready to be set. Basic operation The description below explains how to operate the setup menu basically . The operations in the setup menu are performed with the operation buttons ( + page 12) after call- ing up the setup menu on the connected video monitor . T ...

  • Panasonic WV-CW504SK - page 36

    36 Screenshot 3 The selected setup screen in the setup menu appears on the screen. Note:  • If the top screen of the setup menu is called up with the operation buttons while a camera image is displayed, the setup mode is always "DISABLE" to prevent operation errors. T o configure the settings in the setu ...

  • Panasonic WV-CW504SK - page 37

    37 Screen transition diagram MODEL WV-CW504 CAMERA ID OFF CAMERA SYSTEM BACK-FOCUS SPECIAL LANGUAGE END SETUP DISABLE **CAMERA SETUP** SCENE1 ALC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHITE BAL ATW1 DNR HIGH BW MODE AUTO1 i-VMD RET TOP END **SYSTEM SETUP** SYNC INT LENS PANASONIC PRIVACY ZONE OFF STABILIZER OFF EL-ZOOM OFF UPSIDE-DOWN OFF RET TO ...

  • Panasonic WV-CW504SK - page 38

    38 T roubleshooting Before asking for r epairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below . Symptom Cause/solution Reference pages No image displayed • Arethepowercor dandcoaxial ...

  • Panasonic WV-CW504SK - page 39

    39 Specifications • Basic Power source: 24 V AC 60 Hz, 12 V DC Power consumption: 24 V AC: 3.4 W (without heater unit) 14 W (with heater unit) 12 V DC: 280 mA* Ambient operating temperature: –10 °C to +50 °C {+14 °F to +122 °F} –30 °C to +50 °C {–22 °F to +122 °F}** Ambient operating humidity: Less than 90 % (no condensation) W ater ...

  • Panasonic WV-CW504SK - page 40

    40 Color Mode: 0.2 lx {0.02 footcandle} at F1.4 WIDE 0.006 lx {0.0006 footcandle} (sensitivity up x32, at F1.4 WIDE)* BW mode: 0.02 lx {0.002 footcandle} at F1.4 WIDE 0.0006 lx {0.00006 footcandle} (sensitivity up x32, at F1.4 WIDE)* * Converted value Signal-to-noise ratio: 50 dB (AGC Off) Dynamic range: 52 dB typ. (Super Dynamic 5 ON) Monitor outp ...

  • Panasonic WV-CW504SK - page 41

    41 Standar d accessories CD-ROM* ................................................................... 1 pc. Installation Guide (this book) ....................................... 1 pc. Warranty card ............................................................. 1 pc. *The CD-ROM contains the operating instructions (PDF). The following parts are used ...

  • Panasonic WV-CW504SK - page 42

    42 ...

  • Panasonic WV-CW504SK - page 43

    43 ...

  • Panasonic WV-CW504SK - page 44

    Panasonic System Networks Company of America, Unit of Panasonic Corporation of North America www .panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic W ay , Secaucus, New Jersey 07094 U.S.A. Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 www .panasonic.ca © Panasonic System ...

Produzent Panasonic Kategorie Home Security System

Dokumente, die wir vom Produzenten des Geräts Panasonic WV-CW504SK erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Panasonic
- Bedienungsanleitungen WV-CW504SK
- Produktkarten Panasonic
- Informationsbroschüren
- oder Energieetiketten Panasonic WV-CW504SK
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Panasonic WV-CW504SK.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Panasonic WV-CW504SK, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Panasonic WV-CW504SK. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Panasonic WV-CW504SK ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Panasonic WV-CW504SK, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Panasonic WV-CW504SK hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Panasonic WV-CW504SK verständlich ist.

Eine gänzliche Bedienungsanleitung von Panasonic sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Panasonic WV-CW504SK bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Panasonic WV-CW504SK befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Panasonic WV-CW504SK, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Panasonic WV-CW504SK - die uns die ersten Schritte während der Nutzung von Panasonic WV-CW504SK erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Panasonic WV-CW504SK hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Panasonic WV-CW504SK im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Panasonic WV-CW504SK?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Panasonic WV-CW504SK nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Panasonic WV-CW504SK hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)