Bedienungsanleitung Stanley Black & Decker RD12

22 Seiten 1.6 mb
Download

Zur Seite of 22

Summary
  • Stanley Black & Decker RD12 - page 1

    © 2014 Stanley Black & Decker , Inc. New Britain, CT 06053 U.S.A. 32515 8/2014 V er . 8 USER MANUAL Safety , Operation and Maintenance RD12 HYDRAULIC RAIL DRILL ...

  • Stanley Black & Decker RD12 - page 2

    2 ► RD12 User Manual DECLARATION OF CONF ORMI TY ÜBEREINSTIMM UNGS - ERKLARUNG DECLARATION DE CONFOR MITE CEE DECLARACION DE CONFO RMIDAD DICHIARAZIONE DI CONFO RMITA Hydraulic Tools _______ _________ ___________ ___________ _________ ___________ _________ ___ I, the undersigned: Ich, der Unterzeichnende: Je soussi gné: El abajo firmante: lo so ...

  • Stanley Black & Decker RD12 - page 3

    RD12 User Manual ◄ 3 SERVICING: This manual contains safety , operation, and routine maintenance instructions. Stanley Hydraulic T ools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized and certied dealer . Please read the following warning. For the nearest authorized and certie ...

  • Stanley Black & Decker RD12 - page 4

    4 ► RD12 User Manual Always observe safety symbols. They are included for your safety and for the protection of the tool. LOCAL SAFETY REGULA TIONS Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte- nance personnel. Safety symbols and signal words, as shown below , are used to emphas ...

  • Stanley Black & Decker RD12 - page 5

    RD12 User Manual ◄ 5 T o ol operator s and maintenance per sonnel must always com ply with the safet y precaut ions given in this manual and on the sti ckers and tags at tached to t he tool and ho se. These safet y prec autions are given for your safety . Re - view them c arefully before oper ating the tool and befo re per for ming general mainte ...

  • Stanley Black & Decker RD12 - page 6

    6 ► RD12 User Manual SAFETY T AG P/N 15875 (Shown smaller then actual size) DANGER DANGER READ OPERA TION MANUAL AND SAFETY INSTRUCTIONS FOR THIS TOOL BEFORE USING IT . USE ONL Y P ARTS AND REP AIR PROCEDURES APPROVED BY ST ANLEY AND DESCRIBED IN THE OPERA TION MANUAL. T AG TO BE REMOVED ONL Y BY TOOL OPERA TOR. SEE OTHER SIDE 1. FAILURE TO USE H ...

  • Stanley Black & Decker RD12 - page 7

    RD12 User Manual ◄ 7 The rated working pressure of the hydraulic hose must be equal to or higher than the relief valve setting on the hy- draulic system. There are three types of hydraulic hose that meet this requirement and are authorized for use with Stanley Hydraulic T ools. They are: Certied non-conductive — constructed of thermoplastic ...

  • Stanley Black & Decker RD12 - page 8

    8 ► RD12 User Manual Oil Flow Hose Lengths Inside Diameter USE ( Press/Return) Min. Working Pressure GPM LPM FEET METERS INCH MM PSI BAR Certied Non-Conductive Hose - Fiber Braid - for Utility Bucket T rucks 4-9 15-34 up to 10 up to 3 3/8 10 Both 2250 155 Conductive Hose - Wire Braid or Fiber Braid -DO NOT USE NEAR ELECTRICAL CONDUCT ORS 4-6 1 ...

  • Stanley Black & Decker RD12 - page 9

    RD12 User Manual ◄ 9 Flow Range Nominal Operating Pressure (at the power supply outlet) System relief valve setting (at the power supply outlet) Maximum back pressure (at tool end of the return hose) Measured at a max. uid viscosity of: (at min. operating temperature) T emperature: Sufcient heat rejection capacity to limit max. uid tempe ...

  • Stanley Black & Decker RD12 - page 10

    10 ► RD12 User Manual PREOPERA TION PROCEDURES PREP ARA TION FOR INITIAL USE The tool as shipped has no special unpacking or assem- bly requirements prior to usage. Inspection to assure the tool was not damaged in shipping and that it does not contain packing debris is all that is required. Otherwise, the tool may be connected to a hydraulic sour ...

  • Stanley Black & Decker RD12 - page 11

    RD12 User Manual ◄ 1 1 TO BEGIN DRILLING NOTE: Do not operate the drill in the fully advanced posi- tion for more than 5-10 seconds at one time. 1. Engage the control valve on the hydraulic power source to the ON position. 2. T o begin drilling, move the control lever on the rail drill toward the “drill bit” symbol. The drill bit will turn an ...

  • Stanley Black & Decker RD12 - page 12

    12 ► RD12 User Manual RAIL SIZE RD12 DRILL TEMPLA TE SETS: DOUBLE SIDED/ (SINGLE SIDED) GUIDE ASSY P/N: ING (MM)/[INCHES] COUNTRY 60 ASCE (6040)# ^(34525) USA 65 ASCE (6540)# ^(35975) USA 68GN (52636) 38644 [2 1/8 × 4 1/2 × 7] USA 70 ASCE # ^(49246) USA 72 CHI & NW (7250) ^(35876) USA 75 ASCE (7540) ^34262 22631 [2 1 1/16 × 5 1/2 × 5 1/2] ...

  • Stanley Black & Decker RD12 - page 13

    RD12 User Manual ◄ 13 RAIL SIZE RD12 DRILL TEMPLA TE SETS: DOUBLE SIDED/ (SINGLE SIDED) GUIDE ASSY P/N: ING (MM)/[INCHES] COUNTRY 1 15 RE GUARD RAIL 3 1/32” ELEV A TION ^(35153) USA 1 19 AREA (1 1922) 2 7/8” ELEV A TION 31979/31980/35105/ (31985) (62201 HD) 22625 [3 1/2 × 6 × 6] USA 122 C.B. & O. ^34159(32279) 22625 [3 1/2 × 6 × 6] US ...

  • Stanley Black & Decker RD12 - page 14

    14 ► RD12 User Manual RAIL SIZE RD12 DRILL TEMPLA TE SETS: DOUBLE SIDED/ (SINGLE SIDED) GUIDE ASSY P/N: ING (MM)/[INCHES] COUNTRY 60 KG UIC 31974 29434 (60 × 170) FRANCE S49 31976 / (31982) 31772 (46 × 165) GERMANY S54 31976 / (31982) 31772 (46 × 165) GERMANY 60 KG UIC/UNI 31976 / (31983) 31772 (46 × 165) GERMANY 54 KG UIC ^34261 HOLLAND NP46 ...

  • Stanley Black & Decker RD12 - page 15

    RD12 User Manual ◄ 15 • Make sure all couplers are wiped clean before con- nection. • The hydraulic circuit control valve must be in the OFF position when coupling or uncoupling hydraulic tools. Failure to do so may result in damage to the quick couples and cause overheating of the hydrau- lic system. • Always store the tool in a clean dry ...

  • Stanley Black & Decker RD12 - page 16

    16 ► RD12 User Manual If symptoms of poor performance develop, the following chart can be used as a guide to correct the problem. When diagnosing problems with operation of the drill, always check that the hydraulic power source is supplying the correct hydraulic ow and pressure to the tool as listed in the specications. Use a owmeter kn ...

  • Stanley Black & Decker RD12 - page 17

    RD12 User Manual ◄ 17 Bit Capacity ............................................................................................... up to 1-9/16 in. diameter/36 mm diameter Bit T ype ................................................................................................................ Carbide Inserts (2) on Insert Holder Pressure ....... ...

  • Stanley Black & Decker RD12 - page 18

    18 ► RD12 User Manual 11 2 111 111 11 2 RD12 P ARTS ILLUSTRA TION ...

  • Stanley Black & Decker RD12 - page 19

    RD12 User Manual ◄ 19 ITEM P ART NO. QTY DESCRIPTION 1 24871 4 CAPSCREW 2 24844 1 CARRY HANDLE 3 31097 1 OPERA TION DECAL 4 03787 1 GPM STICKER 5 25773 1 PRESSURE RELIEF V AL VE 6 25774 1 T AMPER RESIST ANT COVER 7 24868 1 FLOW CONTROL 8 00955 4 1/8" PIPE PLUG 9 31096 1 RD12 MODEL NO. STICKER 10 15909 4 CAPSCREW 11 60787 1 FITTING 12 24441 1 ...

  • Stanley Black & Decker RD12 - page 20

    20 ► RD12 User Manual ITEM P ART NO. QTY DESCRIPTION 91 00936 2 ADAPTER 92 12233 1 LEE PLUG (NOT SERVICEABLE) 93 00698 2 HELICOIL 94 22748 1 HOSE CLAMP 9/16 95 24784 1 QUICK DISCONNECT COUPLER 96 29071 1 CLAMP ARM RH 97 — — NO ITEM 98 28322 1 CE STICKER 99 31049 1 EYE PROTECTION STICKER 100 28788 1 MANUAL STICKER 101 1 1207 1 CIRCUIT D STICKE ...

  • Stanley Black & Decker RD12 - page 21

    ...

  • Stanley Black & Decker RD12 - page 22

    Stanley Hydraulic T ools 3810 SE Naef Road Milwaukie, Oregon 97267-5698 USA (503) 659-5660 / Fax (503) 652-1780 www .stanleyhydraulics.com ...

Produzent Stanley Black & Decker Kategorie Drill

Dokumente, die wir vom Produzenten des Geräts Stanley Black & Decker RD12 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Stanley Black & Decker
- Bedienungsanleitungen RD12
- Produktkarten Stanley Black & Decker
- Informationsbroschüren
- oder Energieetiketten Stanley Black & Decker RD12
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Stanley Black & Decker RD12.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Stanley Black & Decker RD12, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Stanley Black & Decker RD12. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Stanley Black & Decker RD12 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Stanley Black & Decker RD12, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Stanley Black & Decker RD12 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Stanley Black & Decker RD12 verständlich ist.

Eine gänzliche Bedienungsanleitung von Stanley Black & Decker sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Stanley Black & Decker RD12 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Stanley Black & Decker RD12 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Stanley Black & Decker RD12, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Stanley Black & Decker RD12 - die uns die ersten Schritte während der Nutzung von Stanley Black & Decker RD12 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Stanley Black & Decker RD12 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Stanley Black & Decker RD12 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Stanley Black & Decker RD12?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Stanley Black & Decker RD12 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Stanley Black & Decker RD12 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)