Bedienungsanleitung Niles Audio MS-1

16 Seiten 0.12 mb
Download

Zur Seite of 16

Summary
  • Niles Audio MS-1 - page 1

    MS- 1 INST ALLA TION & OPERA TION GUIDE MODEL MS - 1 MICROSENSOR ™ MINIA TURE INFRARED SENSOR MS- 1 ...

  • Niles Audio MS-1 - page 2

    I ntroduct ion The MS-1 is a miniature IR sensor designed for use with the Niles Infrared Repeating systems. Installed in a remote room location, the MS-1 receives the IR commands transmitted from your existing hand-held remotes in that room. The commands are carried via a small 2-conductor shielded cable to your A/V equipment in anoth- er room, an ...

  • Niles Audio MS-1 - page 3

    Features and Benefits The MS-1 offers a number of improvements over other miniature IR sensors. ● Small size of only 1 /2" diameter by 2-5/1 6" long — fits almost anywhere. ● Universal system — compatible with virtually all brands of A/V equipment and remote controls. ● Excellent IR receiving range — you get 1 8 to 3 0 feet of ...

  • Niles Audio MS-1 - page 4

    Installation Considerations T ype of Cable The MS-1 connects to the Niles Infrared Systems with an individual home run of 2-conductor shielded cable. Recommended cables are Niles data grade IR cable, W est Penn D291, Belden 8761, Carol C2516 or equivalent, made of two 22 gauge (or larger) conductors surrounded by a foil shield and a bare drain (gro ...

  • Niles Audio MS-1 - page 5

    Receiving Range and Pickup Angle The receiving range of the MS-1 will vary according to the IR output strength of the remote control being used. Remote strength varies among brands depending on the number and size of batteries used, and how many IR emitters the remote has. For example, remotes that operate on two small AAA batteries and have only o ...

  • Niles Audio MS-1 - page 6

    Avoiding Electrical Interference Avoid locating the MS-1 near any potential sources of electri- cal or optical noise, such as light dimmers, florescent lighting fixtures, low-voltage lights, and neon lights. If you are installing the MS-1 near a television, keep it at least 6" away from the top, bottom or sides of the TV to avoid interference. ...

  • Niles Audio MS-1 - page 7

    Avoiding Optical Feedback If installing the MS-1 in the same room as an IR flasher , it is possible for the flasher's IR output to be picked-up by the MS-1. This effect, known as an optical feedback loop, can cause erratic operation. Optical feedback is similar to acousti- cal feedback: the howling or whistling sound heard in a P .A. system wh ...

  • Niles Audio MS-1 - page 8

    2. Hold the MS-1 so that the front of it is facing you, mak- ing sure that the lens is in place. Screw the new bezel onto the MS-1 by turning it clockwise. 7 M INIA TURE I NFRARED S ENSOR Figure 1 Removing the Bezel ...

  • Niles Audio MS-1 - page 9

    8 M INIA TURE I NFRARED S ENSOR (a) Hex Nut (supplied) (b) W asher (supplied) (c) Mounting Surface (d) IR Cable (10 feet supplied) (e) MS-1 Miniature IR Sensor (supplied) (f) MS-1 Lens Bezel (supplied) a b d e f c ...

  • Niles Audio MS-1 - page 10

    9 M INIA TURE I NFRARED S ENSOR Installation If you are installing the MS-1 into an existing wall, take time to consider any possible obstructions which may be hidden inside the wall, such as wood and metal studs; electrical, tele- phone or other types of wiring; plumbing; conduit; old wall safes; etc. 1. Determine a mounting location for the MS-1. ...

  • Niles Audio MS-1 - page 11

    MS-1 Wiring Configuration PIN 1 = Red (+12V DC) PIN 2 = Bare (GND)* PIN 3 = Black (DA T A) NOTE: The color code shown above is for West Penn D291 IR cable. Actual color code of recommended cables may var y . 5. Secure the MS-1 by tightening the hex nut. DO NOT OVER-TIGHTEN . 10 M INIA TURE I NFRARED S ENSOR * Y ou must use the bare drain wire for t ...

  • Niles Audio MS-1 - page 12

    Operation This manual contains instructions for the MS-1 only . For spe- cific information on the adjustment and operation of your Niles Infrared system, please refer to the instruction manual included with your Niles Main System Unit. Operation of the MS-1 is straightforward. Simply aim your hand-held remote at the MS-1. Y our IR command is instan ...

  • Niles Audio MS-1 - page 13

    T roubleshooting The "flash-back" LED on the front of the MS-1 is a useful troubleshooting aid. The LED should light only when a remote command is being received. If the MS-1 does not work, and the LED does not light at all: 1. T est the remote control(s) by operating the A/V equip- ment directly . Replace the batteries if needed. 2. Doub ...

  • Niles Audio MS-1 - page 14

    M INIA TURE I NFRARED S ENSOR 13 There are many methods for reducing interference. Which solution is best for you depends on your situation. Contact Niles T echnical Support at 1 -800-289-4434 if you require further assistance. If the LED on the MS-1 "flickers" dimly , and the MS-1 functions normally , there is no cause for conce rn. ...

  • Niles Audio MS-1 - page 15

    M INIA TURE I NFRARED S ENSOR 14 Specificat ions IR System Compatible with virtually all brands of remotes using carrier frequencies between 1 8 and 1 00 kHz IR Receiving Range V aries depending on remote strength; 1 8-30 feet typical IR Receiving Angle 60 o off-axis (horizontal and vertical) at 1 8 feet Mounting Thru-hole, fits into a 1 /2" d ...

  • Niles Audio MS-1 - page 16

    Nil es Audi o Corporation www .nilesaudio.com 1 233 1 S.W . 1 30 Street Miami, Florida, 33 186 T el: (305) 238-4373 Fax: (305) 238-0 1 85 © 1 999 Niles Audio Corporation. All rights reserved. Because Niles believes in constantly improving its products, Niles reserves the right to change product specifications without notice. Niles and the Niles lo ...

Produzent Niles Audio Kategorie Universal Remote

Dokumente, die wir vom Produzenten des Geräts Niles Audio MS-1 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Niles Audio
- Bedienungsanleitungen MS-1
- Produktkarten Niles Audio
- Informationsbroschüren
- oder Energieetiketten Niles Audio MS-1
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Niles Audio MS-1.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Niles Audio MS-1, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Niles Audio MS-1. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Niles Audio MS-1 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Niles Audio MS-1, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Niles Audio MS-1 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Niles Audio MS-1 verständlich ist.

Eine gänzliche Bedienungsanleitung von Niles Audio sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Niles Audio MS-1 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Niles Audio MS-1 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Niles Audio MS-1, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Niles Audio MS-1 - die uns die ersten Schritte während der Nutzung von Niles Audio MS-1 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Niles Audio MS-1 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Niles Audio MS-1 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Niles Audio MS-1?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Niles Audio MS-1 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Niles Audio MS-1 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)