Bedienungsanleitung Link electronic Door phone

18 Seiten 0.66 mb
Download

Zur Seite of 18

Summary
  • Link electronic Door phone - page 1

    Doorphone Link Slim Door Phone User Guide for Link Slim Door phone ...

  • Link electronic Door phone - page 2

    2 Contents 1 BASIC DESCRI PTION ............................................................................... 3 1.1 F EATURES ............................................................................................ 3 1.2 S LIM D OOR P HONE MODELS .................................................................... 3 2 INSTALLA TION .......... ...

  • Link electronic Door phone - page 3

    3 1. Basic description 1.1 Features ¾ Very slim module for surface mounting only. Supplied in 1, 2 or 4 button variant s. ¾ Voice communication powered fro m analogue telephone line only. ¾ Pulse and tone (DTMF) di al ¾ Two 16 digits numbers sav ed under each button (includes *, #, RECALL an d pause) ¾ DAY/NIGHT mode ¾ Call prolongation by di ...

  • Link electronic Door phone - page 4

    4 2.1.2 Uncover control elements 4. Push the aluminium speaker grille down (see figure – 4). 2.1.3 Wiring and wall mounting 5. Use the wall mounting template at the en d of the manual to mark the position for the screw holes and cable connection on the mounting surface. Drill the holes. 6. Feed the cable (analogue line, power su pply, lock – se ...

  • Link electronic Door phone - page 5

    5 2.1.4 Switches 7. The switch number 1 (see figure – 8) activates heating of the PCB. This is for increased resistance a gainst humidity. To use this feature you must connect an external 12 V power supply. 8. The switch number 2 (see figure – 9) i s required for programmin g the unit when the password is forgo tten. It is performed by ordin ar ...

  • Link electronic Door phone - page 6

    6 2.2 Location of ID Doorphone components All mounting, control and setting elements are lo cated under the sp eaker front aluminium grille. . PC connector SlimDoorPhone fixing screw hole Service switch Loudspeaker MIC-setting of microphone volume TRH – setting of microphone activation level SPK- setting of speaker volume Heating activation 12V = ...

  • Link electronic Door phone - page 7

    7 2.3 Changing name cards Name card panel (0on pa ge 3) has spaces to insert printed name card s. Insert name cards from top (see picture). Cards can easily be printed with pictures as well as text using the includ ed software . The card ou tline is marked for easy cutting . 2.4 Final closing of ID Doorphone 2.4.1 Covering control elements 1. Push ...

  • Link electronic Door phone - page 8

    8 3 SlimDoorPhone Services 3.1 Signalling Overview The unit signals acoustic conditions that may occur during ope ration. You can listen to the signalling samples in the ID Manager program. Condition Tones Tone frequency Pick up line – ▄ – ■ – ▀ – 425-850-1275 Hang up line – ▀ – ■ – ▄ 1275-850-425 Confirm command –– ? ...

  • Link electronic Door phone - page 9

    9 dialled to close the relay ( p arameter 35 ), releasi ng the lock. Hanging up the telephon e will end the call, as will the busy tone from the PBX. 3.3.2 Incoming call An incoming call is a call to the unit. After dialling the PBX extens ion number to which the unit is connected, the unit will ring for the set number of rings ( parameter 51 ), th ...

  • Link electronic Door phone - page 10

    10 4.2 Programming from a PC – ID Manager program To setup the unit from a PC you will require a special USB tool cable, available se parately, and must first install the USB driver and ID Manager software. Refer to the CD for more details. The unit must also be connected to the telephone line. Procedure: - Connect the ID Doorphone to the line - ...

  • Link electronic Door phone - page 11

    11 nn – telephone number up to 16 digits to be store d. Refer to the table for other choices. The number stored in parameter 2 is the numbe r for the second group or the number for Night mode Note: The switchover to Day/Night mode remains set in the unit even after line disconnection. 5.2 Relay Parameter Value Description Default Exam.1 Exam.2 31 ...

  • Link electronic Door phone - page 12

    12 5.3 Basic parameters Parameter Value Description Default Exam.1 Exam.2 41 v Dialling type 0 0 0 v – dial type v=0 is DTMF tone dial, v=1 is pulse dial Parameter Value Description Default Exam.1 Exam.2 42 z Prolong call ∗ ∗ ∗ z – button for call prolongation ∗ or # (10 sec before Maximum Call Duration the unit will emit a tone. Pressi ...

  • Link electronic Door phone - page 13

    13 d – maximum time in minutes for whi ch a call may last. This time can be extende d during a call by dialling Prolong Call digit from telephone ( ∗ or #). Time setting is per table. Parameter Value Description Default Exam.1 Exam.2 53 w time between button presses 2 2 2 w – max. time [sec] between button presses [range 1-9] - relay closing ...

  • Link electronic Door phone - page 14

    14 – p time is simultaneously the duration of interdigit gap at pulse dialling. 5.5 Presetting and Deleting Parameter Value Description Default Exam.1 Exam.2 8# # Default setting executes 8# 1 Setting per exam. 1 executes 8# 2 Setting per exam. 2 executes This setting does not influence 1 and 2 (numbe rs stored in memory) Parameter Value Descript ...

  • Link electronic Door phone - page 15

    15 z=3 – all tones are active – ( default) It is possible to generate an audible sig nal (only in mode m=1) to alert visitors that the door is unlocked so that they can enter. This is especially useful when using a DC power so urce, as lock release may be silent. z=8 – signalling is active z=9 – signalling is unactive Parameter Value Descri ...

  • Link electronic Door phone - page 16

    16 50 p Pause duration (ms) 8 (800ms) 8 (800ms) 8 (800ms) 6# s Number of fitted buttons on basic module 6* t Delay of line connectio n (Siemens PBX) 1 1 1 6 z Acoustic signalling 3 and 9 3 and 9 3 and 9 8# # Default setting executes 8# 1 Setting per exam. 1 executes 8# 2 Setting per exam. 2 executes 81 Deletes all numbers in group 1 (Day mode) 82 D ...

  • Link electronic Door phone - page 17

    17 7 Table for easy programming Complete the values you want to program in the empty part of table on the next page. All programming commands are located in the double-f ramed area, to simplify programming. Retain a copy for future reference. Use Programming sequence Description Detail par. Fill values digits Number under button 1 Day/Gr.1 101 16 N ...

  • Link electronic Door phone - page 18

    18 8 Drilling master board ...

Produzent Link electronic Kategorie Telephone

Dokumente, die wir vom Produzenten des Geräts Link electronic Door phone erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Link electronic
- Bedienungsanleitungen Door phone
- Produktkarten Link electronic
- Informationsbroschüren
- oder Energieetiketten Link electronic Door phone
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Link electronic Door phone.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Link electronic Door phone, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Link electronic Door phone. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Link electronic Door phone ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Link electronic Door phone, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Link electronic Door phone hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Link electronic Door phone verständlich ist.

Eine gänzliche Bedienungsanleitung von Link electronic sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Link electronic Door phone bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Link electronic Door phone befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Link electronic Door phone, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Link electronic Door phone - die uns die ersten Schritte während der Nutzung von Link electronic Door phone erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Link electronic Door phone hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Link electronic Door phone im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Link electronic Door phone?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Link electronic Door phone nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Link electronic Door phone hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)