-
JVC KD-BT22 - page 1
ENGLISH FRANÇAIS CD RECEIVER RÉCEPTEUR CD KD-BT22 For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUEL D’INSTRUCTIONS GET0529-003A [EX/EU] For canceling the display demonstration, see page 5. Pour annuler la démonstration des affichages, ...
-
JVC KD-BT22 - page 2
...
-
JVC KD-BT22 - page 3
G-1 Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC 0984 English: Español: Hereby, JVC, declares that this KD-BT22 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. Por medio de la presente JVC declara que el KD-BT22 cumple con los requisitos esenciales y cualesquiera ...
-
JVC KD-BT22 - page 4
ENGLISH 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; ...
-
JVC KD-BT22 - page 5
ENGLISH 3 How to reset your unit • Your preset adjustments will also be erased (except the registered Bluetooth device, see pages 16 and 17). How to forcibly eject a disc “Please Eject” appears on the display. • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit. CONTENTS INTRODUCTIONS Preparation ... ...
-
JVC KD-BT22 - page 6
ENGLISH 4 Detaching the control panel Attaching the control panel Caution: If the temperature inside the car is below 0°C, the movement of animation and text scroll will be halted on the display to prevent the display from being blurred. appears on the display. When the temperature increases, and the operating temperature is resumed, these functio ...
-
JVC KD-BT22 - page 7
ENGLISH 5 INTRODUCTIONS Preparation Cancel the display demonstration and set the clock • See also pages 32 and 33. 1 Turn on the power. 2 Enter the PSM settings. 3 Cancel the display demonstrations Select “Demo,” then “Off.” Set the clock Select “Clock Hr” (hour), then adjust the hour. Select “Clock Min” (minute), then adjust the ...
-
JVC KD-BT22 - page 8
ENGLISH 6 Basic operations Using the control panel 9 • Select/adjust the sound mode. • Enter the PSM settings [Hold]. p • TUNER/DAB: Select preset station/DAB service. • CD/USB/CD-CH: Select folder/track/disc (for CD changer). • USB-iPod: Select preset top menu items. • Bluetooth: Dial preset phone number * 2 . q • Enter functions mod ...
-
JVC KD-BT22 - page 9
ENGLISH 7 OPERATIONS Installing the lithium coin battery (CR2025) Caution: Battery shall not be exposed to excessive heat such as sunshine, fire, or the like. If the effectiveness of the remote controller decreases, replace the battery. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. • ...
-
JVC KD-BT22 - page 10
ENGLISH 8 When an FM stereo broadcast is hard to receive 1 2 Reception improves, but stereo effect will be lost. • lights up on the display. Listening to the radio 1 Select “TUNER.” 2 Select the bands. 3 Search for a station to listen—Auto Search. Manual Search: Hold either one of the buttons until “M” lights up on the display, then pre ...
-
JVC KD-BT22 - page 11
ENGLISH 9 OPERATIONS FM station automatic presetting — SSM (Strong-station Sequential Memory) You can preset up to six stations for each band. 1 While listening to an FM station... 2 3 Local FM stations with the strongest signals are searched and stored automatically in the selected FM band. Manual presetting Ex.: Storing FM station of 92.5 MHz i ...
-
JVC KD-BT22 - page 12
ENGLISH 10 Listening to the preset station on the Preset Station List 1 Display the Preset Station List, then select the preset station you want to listen to. 2 Change to the selected station. The following features are available only for FM RDS stations. Searching for FM RDS programme — PTY Search You can tune in to a station broadcasting your f ...
-
JVC KD-BT22 - page 13
ENGLISH 11 OPERATIONS Continued on the next page 3 Select “Memory.” 4 Select a preset number (“Preset1”– “Preset6”) you want to store into. 5 Select one of the PTY codes. 6 Store the selected PTY code. 7 Repeat steps 4 to 6 to store other PTY codes into other preset numbers. 8 Exit from the setting. Activating TA/PTY Standby Reception ...
-
JVC KD-BT22 - page 14
ENGLISH 12 4 Exit from the setting. either lights up or flashes on the display. • If lights up, the unit temporarily will switch to your favorite PTY programme from any source other than AM. • If flashes, PTY Standby reception is not yet activated. Tune in to another station (or service) providing the RDS signals. To deactivate PTY Standby Rece ...
-
JVC KD-BT22 - page 15
ENGLISH 13 OPERATIONS Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. Disc operations All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc • Press SOURCE to listen to another playback source. Pressing (or holding) the following buttons allows you to... ...
-
JVC KD-BT22 - page 16
ENGLISH 14 Selecting a folder/track on the list (only for MP3/WMA/AAC file) • When is shown on the display, you can move back to the previous screen by pressing number button 3. 1 2 Select “LIST.” 3 Select the list type. 4 Select an item. • You can move to the other lists by pressing number button 5 ( ) or 6 ( ) repeatedly. 5 Change to the ...
-
JVC KD-BT22 - page 17
ENGLISH 15 OPERATIONS Listening to the USB device You can connect a USB mass storage class device such as a USB memory, Digital Audio Player * 1 , portable HDD, etc. to the unit. • You can also connect an Apple iPod to the USB cable from the rear of the unit. For details of the operation, see pages 26 – 28. This unit can play MP3/WMA/WMA-DRM10 ...
-
JVC KD-BT22 - page 18
ENGLISH 16 Using the Bluetooth ® devices Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected without cables and communicate with each other. • Refer to the list (included in the box) to see the countries where you m ...
-
JVC KD-BT22 - page 19
ENGLISH 17 OPERATIONS Continued on the next page 4 Enter a PIN (Personal Identification Number) code to the unit. • You can enter any number you like (1-digit to 16-digit number). [Initial: 0000] • To enter a PIN code less than 4-digit, firstly delete the initial PIN code (0000) by pressing number button 5 ( ). * Some devices have their own PIN ...
-
JVC KD-BT22 - page 20
ENGLISH 18 You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See “ Auto Cnnct ” on page 37.) Disconnecting a device Perform steps 1 and 2 on page 16, then... Select “Discn Phone” or “Discn Audio.” “Disconnecting...” flashes, then “Disconnected (and device name)” appears on the displa ...
-
JVC KD-BT22 - page 21
ENGLISH 19 OPERATIONS When a call comes in.... The source is automatically changed to “Bluetooth.” • Phone number appears (if acquired). When “Auto Answer” is activated.... The unit answers the incoming calls automatically, see page 37. • When “Auto Answer” is deactivated, press any button (except /control dial) to answer the incomi ...
-
JVC KD-BT22 - page 22
ENGLISH 20 Presetting the phone number You can preset up to six phone numbers. • When is shown on the display, you can move back to the previous screen by pressing number button 3. 1 Display the phone number you want to preset by using one of the “Call” items. 2 Select a phone number. You can also enter a new phone number (see also “How to ...
-
JVC KD-BT22 - page 23
ENGLISH 21 OPERATIONS Using the Bluetooth audio player • Operations and display indications differ depending on their availability on the connected audio player. Select “BT-AUDIO.” If playback does not start automatically, operate the Bluetooth audio player to start playback. [Press] Reverse skip/forward skip [Hold] Reverse search/forward sea ...
-
JVC KD-BT22 - page 24
ENGLISH 22 Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs. Preparation: Make sure “Changer” is selected for the external input setting, see pa ...
-
JVC KD-BT22 - page 25
ENGLISH 23 EXTERNAL DEVICES Continued on the next page Listening to the DAB tuner When surrounding sounds are noisy Some services provide Dynamic Range Control (DRC) signals together with their regular programme signals. DRC will reinforce the low level sounds to improve your listening. 1 2 Select one of the DRC signals levels (1, 2, or 3). • As ...
-
JVC KD-BT22 - page 26
ENGLISH 24 Storing DAB services in memory You can preset six DAB services (primary) for each band. • When appears on the display, you can move back to the previous display by pressing number button 3. Ex.: Storing an ensemble (primary service) into the preset number 4 of the DAB 1 band. Using the number buttons 1 2 Select an ensemble (primary ser ...
-
JVC KD-BT22 - page 27
ENGLISH 25 EXTERNAL DEVICES Continued on the next page Announcement Standby Reception Announcement Standby Reception allows the unit to switch temporarily to your favorite service (announcement type). To activate the Announcement Standby Reception and select the announcement type 1 2 Activating the Announcement Standby Reception. Display the curren ...
-
JVC KD-BT22 - page 28
ENGLISH 26 To show the Dynamic Label Segment (DLS) information While listening to an ensemble that supports DLS.... • The DLS display will be temporarily canceled when you operate the unit. Lights up when receiving a service providing Dynamic Label Segment (DLS)—DAB radio text. Listening to the iPod You can play songs in an Apple iPod by: – C ...
-
JVC KD-BT22 - page 29
ENGLISH 27 EXTERNAL DEVICES Continued on the next page Playback control from the unit Button For iPod connected through KS-PD100 For iPod connected to the USB cable [Press] Go to the next or previous track [Hold] Fast-forward or reverse the track during playback [Press] Go to the next or previous track [Hold] Fast-forward or reverse the track durin ...
-
JVC KD-BT22 - page 30
ENGLISH 28 EXTERNAL DEVICES 3.5 mm stereo mini plug (not supplied) Portable audio player, etc. Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters: – Line Input Adapter, KS-U57 – AUX Input Adapter, KS-U58 Preparation: Make sure “Ext Inpu ...
-
JVC KD-BT22 - page 31
ENGLISH 29 SETTINGS Continued on the next page Selecting a preset sound mode You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). 1 Enter sound mode setting. 2 Select “EQ.” 3 Select “On.” • If “Bypass” is selected, you can listen to the original sound mode recorded. lights up on the display. 4 S ...
-
JVC KD-BT22 - page 32
ENGLISH 30 4 Press number button 1 ( ) to move to another setting level. 4 / ¢ : select the quality of LPF. [–12dB/oct or –24dB/oct] Control dial: Turn the control dial to select the subwoofer phase. [0deg (normal) or 180deg (reverse)] * If “Off” is selected in step 2 , you can only adjust the subwoofer phase. C Hi Pass (Hi Pass Filter) Tu ...
-
JVC KD-BT22 - page 33
ENGLISH 31 SETTINGS Storing your own sound modes You can adjust the sound modes and store your own adjustments in memory. • When is shown on the display, you can move back to the previous screen by pressing number button 6. 1 2 3 Select a sound mode. 4 Select a frequency range to adjust. 5 Adjust the sound elements of the selected frequency range ...
-
JVC KD-BT22 - page 34
ENGLISH 32 4 Adjust the selected PSM item. 5 Repeat steps 2 – 4 to adjust other PSM items if necessary. 6 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table below and on pages 33 – 35. 1 Enter the PSM settings. 2 Select a PSM category. 3 Select a PSM item. By pressing either one of the buttons repeatedly ...
-
JVC KD-BT22 - page 35
ENGLISH 33 SETTINGS Continued on the next page Category Indication Item ( : Initial) Setting, [reference page] CLOCK Clock Hr Hour adjustment 0 – 23 (1 – 12AM/ 1 – 12PM) : Initial: 0 (0:00AM), [5]. Clock Min Minute adjustment 00 – 59 : Initial: 00 (0:00AM), [5]. 24H/12H Time display mode • 12Hours • 24Hours : See also page 5 for setting ...
-
JVC KD-BT22 - page 36
ENGLISH 34 Category Indication Item ( : Initial) Setting, [reference page] TUNER AF-Regn‘l Alternative frequency/ regionalization reception • AF • AF REG • Off : When the currently received signals become weak, the unit switches to another station or service (the programme may differ from the one currently received), [12]. : When the curren ...
-
JVC KD-BT22 - page 37
ENGLISH 35 SETTINGS Continued on the next page 4 Exit from the setting. Changing the display color You can select your favorite display color for each source (or all sources). • When is shown on the display, you can move back to the previous screen by pressing number button 3 or 6. Setting the display color 1 Follow steps 1 to 3 on page 32. • I ...
-
JVC KD-BT22 - page 38
ENGLISH 36 3 Select a source. All Source * 1 Ô CD Ô Changer * 3 (or Ext In * 2 ) Ô USB * 3 Ô FM Ô AM Ô DAB * 3 Ô iPod * 3 Ô Aux In Ô BT Audio Ô (back to the beginning) * 1 When you select “All Source,” you can use the same color for all the sources. * 2 Depends on the “Ext Input” setting, see page 34. * 3 Displayed only when the t ...
-
JVC KD-BT22 - page 39
ENGLISH 37 SETTINGS MIC (microphone setting) Adjust the built-in microphone volume, [Level 01/02/03]. PhoneBook Load the phone book of the Bluetooth phone to the unit. (You can load up to 50 phone numbers.) Initialize Yes : Initialize all settings you have made in the Bluetooth menu. No : Return to the previous screen. Name Name of the unit (as sho ...
-
JVC KD-BT22 - page 40
ENGLISH 38 More about this unit FM RDS operations • Network-Tracking Reception requires two types of RDS signals—PI (Programme Identification) and AF (Alternative Frequency) to work correctly. Without receiving these data correctly, Network-Tracking Reception will not operate correctly. • If a Traffic Announcement is received by TA Standby Re ...
-
JVC KD-BT22 - page 41
ENGLISH 39 REFERENCES Continued on the next page • While fast-forwarding or reversing on MP3/WMA/ AAC/WAV files, you can only hear intermittent sounds. • File/folder list may not appear correctly if too many hierarchies and folders are used. • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into ...
-
JVC KD-BT22 - page 42
ENGLISH 40 • This unit can play back files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in the elapsed time display, and do not show the actual elapsed time. In particular, this difference becomes noticeable after performing the search function. • This unit cannot play back the following files: – MP3 files enc ...
-
JVC KD-BT22 - page 43
ENGLISH 41 REFERENCES Continued on the next page • This unit cannot assure proper functions or supply power to all types of USB devices. Bluetooth operations General • While driving, do not perform complicated operation such as dialing the numbers, using phone book, etc. When you perform these operations, stop your car in a safe place. • Some ...
-
JVC KD-BT22 - page 44
ENGLISH 42 • Update your iPod to the latest software version before using it with this unit. – You can check the software version of your iPod under “About” in the “Setting” menu of the iPod. – For details about updating your iPod, visit <http://www.apple.com>. • While the unit is being turned on, the iPod is charged through t ...
-
JVC KD-BT22 - page 45
ENGLISH 43 REFERENCES Continued on the next page Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit doe ...
-
JVC KD-BT22 - page 46
ENGLISH 44 Symptoms Remedies/Causes MP3/WMA/AAC playback • A longer readout time is required (“Reading” keeps flashing on the display). Do not use too many hierarchical levels and folders. • Tracks do not play back in the order you have intended them to play. The playback order is determined when the files are recorded. • The elapsed play ...
-
JVC KD-BT22 - page 47
ENGLISH 45 REFERENCES Continued on the next page Symptoms Remedies/Causes USB device • Correct characters are not displayed (e.g. album name). For available characters, see page 42. • While playing a track, sound is sometimes interrupted. The tracks have not been properly copied into the USB device. Copy tracks again into the USB device, and tr ...
-
JVC KD-BT22 - page 48
ENGLISH 46 Symptoms Remedies/Causes CD changer • “No Disc” appears on the display. Insert a disc into the magazine. • “No Magazine” appears on the display. Insert the magazine. • “Reset 08” appears on the display. Connect this unit and the CD changer correctly and press the reset button of the CD changer. • “Reset 01” – ? ...
-
JVC KD-BT22 - page 49
ENGLISH 47 REFERENCES How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Moisture condensation Moisture may condense on the lens inside the unit in the following ...
-
JVC KD-BT22 - page 50
ENGLISH 48 AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequency: Band 1: 68 Hz, 100 Hz, 150 Hz Band 2: 210 ...
-
JVC KD-BT22 - page 51
ENGLISH 49 REFERENCES CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio La ...
-
JVC KD-BT22 - page 52
EN, FR 0108DTSMDTJEIN © 2008 Victor Company of Japan, Limited Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil Dear Customer, This apparatus is in conforma ...
Haben Sie eine Frage bezüglich JVC KD-BT22?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit JVC KD-BT22 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit JVC KD-BT22 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.