-
ZyXEL Communications N300 - page 1
Quick Start Guide www .zyxel.com EMG1302-R10A Wireless N300 4-port Ethernet Gatewa y Ve r s i o n V 1 . 0 0 Edition 1, 1/2014 Copyright © 2013 Z yXEL Communications Corpor ation User’s Guide Default Login Details LAN IP Address http://192.168.1.1 User Name supervisor P assword supervisor User Name admin P assword 1234 ...
-
ZyXEL Communications N300 - page 2
EMG1302-R10A User’s Guide 2 IMPORT ANT! READ CAREFULL Y BEFORE USE. KEEP THIS GUIDE FOR FUTURE REFERENCE. Note: This guide is a re ference for a series of products. Therefore so me features or options in this guide ma y not be av ailable in your product. Graphics in this book ma y differ slightly from the product due to difference s in oper ating ...
-
ZyXEL Communications N300 - page 3
Contents Overview EMG1302-R10A User’s Guide 3 Contents Overview User ’ s Guide .................................................................... .......... .................................... ......... 1 1 Introduction ........... ................ ................. ................ ................ ................... ................ ... . ...
-
ZyXEL Communications N300 - page 4
Contents Overview EMG1302-R10A User’s Guide 4 ...
-
ZyXEL Communications N300 - page 5
Table of Contents EMG1302-R10A User’s Guide 5 Table of Contents Contents Overview .............................................................................. ............................... ..... 3 Table of Contents ................................................. ..................................................... ........... .... 5 Part I ...
-
ZyXEL Communications N300 - page 6
Table of Contents EMG1302-R10A User’s Guide 6 4.6 WLAN S tation S tatus . ................ ................ ................ ................. ................... ................ .. ..... 31 Chapter 5 Router Mode .......................................................... ..................................................... ..... ........ 33 5.1 ...
-
ZyXEL Communications N300 - page 7
Table of Contents EMG1302-R10A User’s Guide 7 8.5.1 No Security ... ................ ................... ................ ................. ................ ................ ...... .... 79 8.5.2 WP A2-PSK ...... ................................................ ................. ................ ............. ............ .8 0 8.6 More AP ....... ...
-
ZyXEL Communications N300 - page 8
Table of Contents EMG1302-R10A User’s Guide 8 Chapter 12 NA T ............................................................... ..................................................... .......... ........... 107 12.1 Overview ... ................ ................ ................ ................. ................ ................... ......... ....... ...
-
ZyXEL Communications N300 - page 9
Table of Contents EMG1302-R10A User’s Guide 9 Chapter 18 IPv6 Firewall ..................................................................... ............................................. ........ 133 18.1 Overview .... ................ ................ ................ ................. ................ ................... ......... ......... 133 ...
-
ZyXEL Communications N300 - page 10
Table of Contents EMG1302-R10A User’s Guide 10 22.3 EMG1302-R10A Access and Login ........ ....... ......... ................. ................ ................ ........ 160 22.4 Internet Access ....... ................ ................ .................... ................ ................ ............... ...... 161 22.5 Resetting the EMG1302-R1 ...
-
ZyXEL Communications N300 - page 11
11 P ART I User ’ s Guide ...
-
ZyXEL Communications N300 - page 12
12 ...
-
ZyXEL Communications N300 - page 13
EMG1302-R10A User’s Guide 13 C HAPTER 1 Introduction 1.1 Overview This chapter introduces the main features and applications of the EMG1302-R10A. The EMG1302-R10A Wireless N300 4-port Ethernet Gateway is an Ethernet Gateway that provides four Ethernet ports meeting the IEEE 802.11 b/g/n wireless standard, and it features TR -069 remote management ...
-
ZyXEL Communications N300 - page 14
Chapter 1 Introductio n EMG1302-R10A User’s Guide 14 • Change the password . Use a password that’ s not easy to guess and that consists of different types of characters, such as numbers and letters. • Write down the password and put it in a safe place. • Back up the configur ation (and make sure y ou know how to restore it). R estoring an ...
-
ZyXEL Communications N300 - page 15
Chapter 1 Introduction EMG1302-R10A User’s Guide 15 1.6 The WPS Button Figure 2 Front P anel Y our EMG1302-R10A supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless network. WPS is an industry standard specification, defined by the WiFi Alliance. WPS allows you to quickly set up a wireless network with strong secu ...
-
ZyXEL Communications N300 - page 16
Chapter 1 Introductio n EMG1302-R10A User’s Guide 16 1.7 W all Mounting Y ou may need screw anchors if mounting on a concrete or brick wall. 1 Select a position free of obstructions on a wall strong enough to ho ld the weight of the device. 2 Mark two holes on the wall at the appropriate distance apart for the screws. Be careful to avoid da magin ...
-
ZyXEL Communications N300 - page 17
EMG1302-R10A User’s Guide 17 C HAPTER 2 Introducing the Web Configurator 2.1 Overview This chapter describes how to access the EMG 1302-R10A W eb Configurator and provides an overview of its screens. The W eb Configurator is an HTML -based management interface that allows easy setup and management of the EMG1302-R10A via Internet browser . Use In ...
-
ZyXEL Communications N300 - page 18
Chapter 2 Introducing the Web Configurator EMG1302-R10A User’s Guide 18 3 T ype "http://192.168.1.1" as the website address. Y our computer must be in the same subnet in order to access this website address. 4 If you are loggin g in with the “ admin ” account, type “1234 ” (default) as the password. If you are loggin g in with t ...
-
ZyXEL Communications N300 - page 19
Chapter 2 Introducin g the Web Configurator EMG1302-R10A User’s Guide 19 The following table describes the labels in this screen. Note: The management session au tomatically ti mes out when the time p eriod set in the Administrator Inactivity Timer field expires (default fiv e minutes; go to Chapter 21 on page 151 to change this). Simply log back ...
-
ZyXEL Communications N300 - page 20
Chapter 2 Introducing the Web Configurator EMG1302-R10A User’s Guide 20 ...
-
ZyXEL Communications N300 - page 21
EMG1302-R10A User’s Guide 21 C HAPTER 3 Quick Start 3.1 Overview Use the Quick Start screens to configure the Z yXEL Device’ s time zone and basic Internet access and wireless settings. Note: See the technical refere nce chapters (starting on page 55 ) for background information on the features in this chapter . 3.2 Quick S t art Setup 1 Click ...
-
ZyXEL Communications N300 - page 22
Chapter 3 Quick Start EMG1302-R10A User’s Guide 22 3 Click Next to continue. Figure 7 Setup Login P assword 4 Select the time zone for this devi ce from the drop-down menu or click Detect Again to automatically select the time zone. 5 Click Next to continue. Figure 8 Setup Time Z one 6 Setup the W AN type by selecting a configuration type from th ...
-
ZyXEL Communications N300 - page 23
Chapter 3 Qu ick Start EMG1302-R10A User’s Guide 23 8 Click Next to continue. Figure 9 Select WAN T ype 9 Configure the W AN type, select from the following settings: • Dynamic IP Address (default) • Static IP Address • PPP Over Ethernet • PPTP 10 The WAN T ype window as selecte d above displa ys. Fill in the respective fields to complete ...
-
ZyXEL Communications N300 - page 24
Chapter 3 Quick Start EMG1302-R10A User’s Guide 24 13 Enter the SSID in the Network ID field to identify this devi ce on the network. 14 Select a channel designation from the drop-down menu or select Auto to allow the device to automatically assign one. 15 Click Next to continue. Figure 1 1 Setup Wireless Setti ngs 16 Select a security mode from ...
-
ZyXEL Communications N300 - page 25
Chapter 3 Qu ick Start EMG1302-R10A User’s Guide 25 19 If the information does not require modification, select the D o y o u w a n t t o p r o c e e d t h e n e t w o r k testing? and click Apply Settings . Figure 13 Setup Summary The device begins applying the new settings. The process requires a short time to fully complete. 20 Once the proces ...
-
ZyXEL Communications N300 - page 26
Chapter 3 Quick Start EMG1302-R10A User’s Guide 26 ...
-
ZyXEL Communications N300 - page 27
EMG1302-R10A User’s Guide 27 C HAPTER 4 Monitor 4.1 Overview This chapter discusses read-only information related to the device state of the EMG1302-R10A. T o access the Monitor screens, click . Click open all to show the complete menu. Y ou can also click the links in the Summary table of the Status screen to view the bandwidth consumed, packets ...
-
ZyXEL Communications N300 - page 28
Chapter 4 Mon itor EMG1302-R10A User’s Guide 28 4.3 The Log Screen The W eb Configurator allows you to look at a ll of the EMG1302-R10A’s logs in one location. 4.3.1 V iew Log Click Monitor > Log to open the View Log screen. Y ou can see the logged messages for the EMG1302-R10A. The log wraps around and dele tes the old entries after it fill ...
-
ZyXEL Communications N300 - page 29
Chapter 4 Monitor EMG1302-R10A User’s Guide 29 4.3.2 Log Setting Y ou can configure which logs to display in the View Log screen. Click Monitor > Log to open the Log Setting screen and select the logs you wish to display . Y ou can configure active log and alert settings. Figure 15 Log Setting 4.4 DHCP T able Dynamic Host Configuration Protoco ...
-
ZyXEL Communications N300 - page 30
Chapter 4 Mon itor EMG1302-R10A User’s Guide 30 4.5 Packet S t atistics Click the Packet Statistics (Details...) hyperlink in the Status screen or Monitor > Packet Statistics . Read-only info rmation here includes port statistics and the "system up time". The Poll Interval(s) field is configur able and is used for refreshing the scre ...
-
ZyXEL Communications N300 - page 31
Chapter 4 Monitor EMG1302-R10A User’s Guide 31 4.6 WLAN S t ation St atus Click the WLAN Station Status (Details...) hyperlink in the Status screen or Monitor > WLAN Station Status . View the wireless stations that are currently associated to the EMG1302-R10A in the Association List . Association means that a wireless client (for example, your ...
-
ZyXEL Communications N300 - page 32
Chapter 4 Mon itor EMG1302-R10A User’s Guide 32 ...
-
ZyXEL Communications N300 - page 33
EMG1302-R10A User’s Guide 33 C HAPTER 5 Router Mode 5.1 Overview The EMG1302-R10A router mode connects the loca l network to another network (for example, the Internet). In the figure below , the EM G1302-R10A connects the loc al network ( LAN1 ~ LAN4 ) to the Internet. Figure 19 EMG1302-R10A Network Modem ...
-
ZyXEL Communications N300 - page 34
Chapter 5 Router Mode EMG1302-R10A User’s Guide 34 5.2 Router Mode S t atus Screen Click to open the status screen. Figure 20 Status Screen: Router Mode The following table describes the icons shown in the Status screen. T a ble 8 Status Screen Icon K ey: Router Mode ICON DESCRIPTION Click this icon to open screens wher e you can co nfigure the Z ...
-
ZyXEL Communications N300 - page 35
Chapter 5 Router Mode EMG1302-R10A User’s Guide 35 The following table describes the labels shown in the Status screen. Click this butt on to refresh the status sc reen statistics. Click this i con to see the Status page. The information in this screen depends on the device mode you selec t. Click this i con to see the Monitor navigation menu. Cl ...
-
ZyXEL Communications N300 - page 36
Chapter 5 Router Mode EMG1302-R10A User’s Guide 36 System Resource - CPU Usage This displays what percentage of the EM G1302-R10A’ s processing ability is currentl y used. When this percentage i s close to 100%, the EMG1302-R10 A is running at full load, and the throughput is not going to improve an ymore. If yo u want some ap plications t o ha ...
-
ZyXEL Communications N300 - page 37
Chapter 5 Router Mode EMG1302-R10A User’s Guide 37 5.2.1 Navigation Panel Use the sub-menus on t he navigation pane l to configure EMG1302-R10A features. Figure 21 Navigation P anel: Router Mode The following table describes the sub-menus. T a ble 10 Navigation Panel: R outer Mode LINK TA B FUNCTION Status Thi s screen shows the EMG1302-R1 0A’s ...
-
ZyXEL Communications N300 - page 38
Chapter 5 Router Mode EMG1302-R10A User’s Guide 38 Wireless LAN Gener a l Use this scree n to configure wirele ss LAN and the level of wireless security for the EMG1302-R10A. More AP Use this screen to configure multiple BBs for the EMG1302-R1 0A. MAC Filter Use the MAC filter screen to conf igure the EMG1302-R10A to block access to devices or bl ...
-
ZyXEL Communications N300 - page 39
Chapter 5 Router Mode EMG1302-R10A User’s Guide 39 Management Rem o te MGMT WWW Use this scre en to configure throu g h which in terface(s) and from which IP address(es) user s can use HT TP to manage the EMG1302-R10A. Te l n e t Use this scre en to configure th roug h which inte rface(s) and from which IP address(es) user s can use T elnet to ma ...
-
ZyXEL Communications N300 - page 40
Chapter 5 Router Mode EMG1302-R10A User’s Guide 40 ...
-
ZyXEL Communications N300 - page 41
EMG1302-R10A User’s Guide 41 C HAPTER 6 Tutorials 6.1 Overview This chapter provides tutorials fo r setting up your EMG1302-R10A. • Set Up a Wireless Network with WPS • Configure Wireless Security without WPS • Using Multiple SSIDs on the EMG1302-R10A 6.2 Set Up a Wireless Network with WPS This section gives you an example of how to set up ...
-
ZyXEL Communications N300 - page 42
Chapter 6 Tutorials EMG1302-R10A User’s Guide 42 Note: Y our EMG1302-R10A has a WPS button lo cated on top panel, as well as a WPS button in its configur ation utility . Both bu ttons have exactly the same function; you can use one or the other . Note: It doesn’t matter which button is pres sed fi rst. Y ou must pr ess the second button within ...
-
ZyXEL Communications N300 - page 43
Chapter 6 Tutorials EMG1302-R10A User’s Guide 43 3 Click Start buttons (or button next to the PI N field) on both the wireless client utility screen and the EMG1302-R10A’s WPS Station screen within two minutes. The EMG1302-R10A authenticates the wireless cli ent and sends the proper configuration settings to the wireless client. This may take u ...
-
ZyXEL Communications N300 - page 44
Chapter 6 Tutorials EMG1302-R10A User’s Guide 44 The instructions require that your hardware is connected (see the Quick Start Guide) and you are logged into the W eb Configurator through your LAN connection (see Se ction 2.3 on page 17 ). 1 Make sure the WLAN switch (at the back panel of the EMG1 302-R10A) is set to ON . 2 Open the Configuration ...
-
ZyXEL Communications N300 - page 45
Chapter 6 Tutorials EMG1302-R10A User’s Guide 45 5 Open the Status screen. V erify your wireless and wireless security settings under Device Information and check if the WLAN connection is up under Interface Status . 6.3.1 Configure Y our Notebook Note: W e use th e Z yXEL M-302 wirele ss adap ter utility screens as an example for the wireless cl ...
-
ZyXEL Communications N300 - page 46
Chapter 6 Tutorials EMG1302-R10A User’s Guide 46 4 Select SSID_Example3 and click Connect . 5 Select WPA -PSK and type the security key in the following screen. Click Next . 6 The Confirm Save window appears. Check your settings and click Save to continue. 7 Check the status of your wireless connection in the screen below . If your wireless conne ...
-
ZyXEL Communications N300 - page 47
Chapter 6 Tutorials EMG1302-R10A User’s Guide 47 If your connection is successful, open y our Internet browser and enter http://www .zyxel.com or the URL of any other web site in the address bar . If you are able to access the web site, your wireless connection is successfully configured. 6.4 Using Multiple SSIDs on the EMG1302-R10A Y ou can conf ...
-
ZyXEL Communications N300 - page 48
Chapter 6 Tutorials EMG1302-R10A User’s Guide 48 For example, yo u may set up three wireless networks ( A , B and C ) in your office. A is for workers, B is for guests and C is specific to a V oIP device in the meeting room. 6.4.1 Configuring Security Se ttings of Multiple SSIDs This example shows you how to configure the SSIDs with the following ...
-
ZyXEL Communications N300 - page 49
Chapter 6 Tutorials EMG1302-R10A User’s Guide 49 7 Go to Configuration > Network > Wireless LAN > More AP . Click the Edit icon of the first entry to configure wireless and security settings for SSID_Worker . 8 Configure the screen as follows. In this example, you enable Intra-BSS Traffic for SSID_Worker to allow wireless clients in the ...
-
ZyXEL Communications N300 - page 50
Chapter 6 Tutorials EMG1302-R10A User’s Guide 50 10 Configure the screen as follows. Y ou do not enable Intra-BSS Traffic for SSID_VoIP . Click Apply . 11 Click the MAC Filter t ab to configure MA C filtering for the SSID_VoIP wireless network. Select SSID_VoIP from the SSID Select drop-down list, enable MAC address filtering and set the Filter A ...
-
ZyXEL Communications N300 - page 51
51 P ART II T echnical Reference ...
-
ZyXEL Communications N300 - page 52
52 ...
-
ZyXEL Communications N300 - page 53
EMG1302-R10A User’s Guide 53 C HAPTER 7 WAN 7.1 Overview This chapter discusses the EMG1302-R10A’s WAN screens. Use these screens to configure your EMG1302-R10A for Internet access. A WAN (Wide Area Network) connection is an outside connection to another network or the Internet. It connects your priv ate networks such as a LAN (Local Area Netwo ...
-
ZyXEL Communications N300 - page 54
Chapter 7 WAN EMG1302-R10A User’s Guide 54 7.3 What Y ou Need T o Know The information in this section can help you configure the screens for your W AN connection, as well as enable/disable some advanced features of your EMG1302-R10A. 7.3.1 Configuring Y our Internet Connection Encap sulation Method Encapsulation is used to include data from an u ...
-
ZyXEL Communications N300 - page 55
Chapter 7 WAN EMG1302-R10A User’s Guide 55 W AN MAC Address The MAC address screen allows user s to configure the WAN port's MA C address by either using the factory default or cloning the MAC address from a computer on your LAN. Choose Factory Default to select the factory assigned default MAC Address. Otherwise, click Clone the computer&ap ...
-
ZyXEL Communications N300 - page 56
Chapter 7 WAN EMG1302-R10A User’s Guide 56 Auto-IP-Change When the EMG1302-R10A gets a WAN IP address which is in the same subnet as the LAN IP address 192.168.1.1, Auto-IP-Change allows the EMG1302-R10A to change its LAN IP address to 10.0.0.1 automatically . If the EMG1302-R10A’s origin al LAN IP address is 10.0.0.1 and the WA N IP address is ...
-
ZyXEL Communications N300 - page 57
Chapter 7 WAN EMG1302-R10A User’s Guide 57 7.4 Management W AN Use this screen to view, change, or add your EMG1302-R10A’s Internet access settings. Click Configuration > Network > WAN . The following screen ope ns. Figure 27 Configuration > Network > Management WAN The following table describes the labels in this screen. Ta b l e 1 ...
-
ZyXEL Communications N300 - page 58
Chapter 7 WAN EMG1302-R10A User’s Guide 58 7.4.1 Add/Edit Internet Connection Click the Add New WAN Entry in the Configuration > WAN screen or the Edit icon next to the connection you w ant to configure. Use this screen to configure a WAN connection. The screen varies depending on the encapsulation you select. This screen displays when you sel ...
-
ZyXEL Communications N300 - page 59
Chapter 7 WAN EMG1302-R10A User’s Guide 59 The following table describes the labels in this screen. T a ble 12 Conf iguration > WAN > Add New WAN Entry LABEL DESCRIPTION ISP Par ameters for Internet Access WAN Name E nter the name designat ion for this se tting. Note: Only the followi ng parameters are available in Bridge mo de: W AN na me, ...
-
ZyXEL Communications N300 - page 60
Chapter 7 WAN EMG1302-R10A User’s Guide 60 7.4.1.1 PPPoE Encap sulation The EMG1302-R10A supports PPPoE (P oint-to-P oint Protocol over Ethernet). PPP oE is an IETF standard (RFC 2516) specifying how a personal computer (PC) interacts with a broadband modem (DSL, cable, wireless, etc.) connection. The PPP over Ethernet option is for a dial-up con ...
-
ZyXEL Communications N300 - page 61
Chapter 7 WAN EMG1302-R10A User’s Guide 61 This screen displays when you select PPP over Ethernet encapsulation. Figure 29 Internet Connection: PPP over Ethernet Encapsulation ...
-
ZyXEL Communications N300 - page 62
Chapter 7 WAN EMG1302-R10A User’s Guide 62 The following table describes the labels in this screen. T a ble 13 Internet Connection: PP P over Ethernet Encapsulation LABEL DESCRIPTION ISP Par ameters for Internet Access Encapsu lation Select PPP over Ethernet if you connect to your Internet via dial-up. IPv4 / IPv6 Click the drop-down m enu to sel ...
-
ZyXEL Communications N300 - page 63
Chapter 7 WAN EMG1302-R10A User’s Guide 63 7.4.1.2 PPTP Encap su lation Po int-to-P oint T unneling Protocol (PPTP) is a networ k protocol that enables secure transfer of data from a remote client to a priv ate server , creating a Virtual Private Network (VPN) using T CP/IP- based networks. PPTP supports on-demand, multi-protocol and virtual priv ...
-
ZyXEL Communications N300 - page 64
Chapter 7 WAN EMG1302-R10A User’s Guide 64 This screen displays when you select PPTP encapsulation. Figure 30 Internet Connection: PPTP Encapsulation ...
-
ZyXEL Communications N300 - page 65
Chapter 7 WAN EMG1302-R10A User’s Guide 65 The following table describes the labels in this screen. T a ble 14 Internet Connection:PPTP Encapsulation LABEL DESCRIPTION ISP Par ameters for Internet Access Encapsu lation Select PPTP to create a Virtual Priv ate Network (VPN) usin g TCP/IP-b ased network. Enable VID VID (1~4094) Enter a VLAN identif ...
-
ZyXEL Communications N300 - page 66
Chapter 7 WAN EMG1302-R10A User’s Guide 66 7.4.1.3 IPoE Encap sulation IP over Ethernet is an alternative to PPP enca psu lation. In IP oE DHCP extensions and other protocols, like for example Extensible Authenticati on Protocol, are combined with DHCP to pro vide capabilities similar to PPPoE. Y ou can configure the WAN connection with IP oE to ...
-
ZyXEL Communications N300 - page 67
Chapter 7 WAN EMG1302-R10A User’s Guide 67 This screen displays when you select IPoE encapsulation. Figure 31 Internet Connection: IPoE En capsulation ...
-
ZyXEL Communications N300 - page 68
Chapter 7 WAN EMG1302-R10A User’s Guide 68 The following table describes the labels in this screen. T a ble 15 Internet Connection: IP over Ethernet Encapsulation LABEL DESCRIPTION ISP Par ameters for Internet Access Encapsu lation Y ou must choos e the IPoE option when the W AN port is used as a regular Ethernet. IPv4 / IPv6 Click the drop down ...
-
ZyXEL Communications N300 - page 69
Chapter 7 WAN EMG1302-R10A User’s Guide 69 7.4.2 Bridge Encap sulation This screen displays when you select Bridge encapsulation. Figure 32 Internet Connection: Bridge Encapsulation The following table describes the labels in this screen. Pas sth ro ug h PPTP P assthrough L2TP Passthrough IPSec P assthrough Apply Click Apply to save your changes ...
-
ZyXEL Communications N300 - page 70
Chapter 7 WAN EMG1302-R10A User’s Guide 70 7.5 Advanced W AN Screen Use this screen to enable Multicast and enable Auto-IP-Chang e mode. T o change your EMG1302-R10A’ s advanced WAN settings, click Con figuration > Network > WAN > Advanced . The screen appears as shown. Figure 33 Configuration > Network > WAN > A d va nc e d T ...
-
ZyXEL Communications N300 - page 71
Chapter 7 WAN EMG1302-R10A User’s Guide 71 7.6 IPv6 Screen Use this section to enable and configure IPv6 addresses. By using IPv6, you are able to receive services such as: quality of service (QoS), end-to-end security , and globally unique addresses. Figure 34 Configuration > Network > WAN > IPv6 The following table describes the labels ...
-
ZyXEL Communications N300 - page 72
Chapter 7 WAN EMG1302-R10A User’s Guide 72 Address Mode Click Dynamic IP if your ISP assigs an IP address. If you have a fixed IP address assigned to yo u, click Static IP , and type the I P Address , Username and Password in the following fields. Username Enter the userna me as it is assigned for this account. Passwor d Enter the designated pass ...
-
ZyXEL Communications N300 - page 73
EMG1302-R10A User’s Guide 73 C HAPTER 8 Wireless LAN 8.1 Overview This chapter discusses how to configure the wirele ss network settings in your EMG1302-R10A. See the appendices for more detailed information about wireless networks. The following figure provides an example of a wireless network. Figure 35 Example of a Wireless Network The wireles ...
-
ZyXEL Communications N300 - page 74
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 74 •U s e t h e QoS screen to ensure Quality of Service (QoS) in your wireless network ( Section 8.9 on page 85 ). •U s e t h e WPS screen to quickly set up a wireless network with strong security , without having to configure security settings manually ( Section 8.10 on page 86 ). •U s e t h ...
-
ZyXEL Communications N300 - page 75
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 75 00:A0:C5:00:00:02. T o get the MAC address for ea ch wireless client, see the appropriate User ’s Guide or other documentation. Y ou can use the MAC address filter to tell the AP which wireless clients are allowed or not allowed to use the wireless network. If a wireless client is allowed to u ...
-
ZyXEL Communications N300 - page 76
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 76 Usually , you should set up the strongest encryption that every wireless client in the wireless network supports. For example, suppose the AP does not have a local user database, and you do not have a RAD IUS server . Therefore, there is no user authentication. Suppose the wireless network has t ...
-
ZyXEL Communications N300 - page 77
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 77 Click Configuration > Network > Wireless LAN to open the Gene ral screen. Figure 36 Configuration > Network > Wireless LAN > General The followi ng table describ es the gener a l wireless LAN labels in this screen. T a ble 20 Conf iguration > Network > Wirele ss LAN > Gen ...
-
ZyXEL Communications N300 - page 78
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 78 See the rest of this chapter for inform at ion on the other labels in this screen. Channel W idth Select whether the EMG1302-R 10A uses a wireless channel wi dth of 20MHz or Auto . If Auto is selected, the EMG1302 -R10A will use 40MHz if it is supported. A standard 20MHz channel offers tr ansfer ...
-
ZyXEL Communications N300 - page 79
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 79 8.5 Wireless Security Use this part of the Genera l screen to select the wireless security mode. Click Network > Wireless LAN to open the Ge neral screen. The screen varies depending on what you select in the Security Mode field. 8.5.1 No Security Select No Security to allow wireless clients ...
-
ZyXEL Communications N300 - page 80
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 80 8.5.2 WP A2-PSK Select WPA2-PSK from the Security Mode list. Figure 38 Wireless LAN > General: Security: WPA2-PSK The following table describes the labels in this screen. T a ble 22 Wireless LA N > Gener al: Security: WPA-PSK/WPA2-PSK LABEL DESCRIPTION Security Mode Se lect WPA-PSK or WPA2 ...
-
ZyXEL Communications N300 - page 81
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 81 8.6 More AP This screen allows you to enable and configure multiple wireless networks on the EMG1302-R10A. Select Configuration > Network > Wireless LAN > More AP . The screen appears as shown. Figure 39 Wireless LAN > More AP The following table describes the labels in this screen. ...
-
ZyXEL Communications N300 - page 82
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 82 8.6.1 More AP Edit Use this screen to edit an SSID profile. Click the Edit i co n ne xt to an SSI D in th e Configuration > Network > Wireless LAN > More AP screen. The following screen displays. Figure 40 Wireless LAN > More AP: Edit The following table describes the labels in this ...
-
ZyXEL Communications N300 - page 83
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 83 8.7 MAC Filter The MAC filter screen allows yo u to configure the EMG1302-R10A to give exclusiv e access to devices (Allow) or exclude devices from accessing the EMG1302-R10A (Deny). Ev ery Ethernet device has a unique MAC (Media Access Control) address. The MAC addre ss is assigned at the facto ...
-
ZyXEL Communications N300 - page 84
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 84 The following table describes the labels in this menu. 8.8 Wireless LAN Advanced Screen Use this screen to allow wireless adv anced features, such as the output power , RTS/CTS Threshold and high-throughput ph ysical mode settings. Click Configuration > Network > Wireless LAN > Advanced ...
-
ZyXEL Communications N300 - page 85
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 85 8.9 Quality of Service (QoS) Screen The QoS screen allows you to automatically give a service (such as V oIP and video) a priority level. Click Configuration > Network > Wireless LAN > QoS . The following screen appears. Figure 43 Configuration > Network > Wireless LAN > QoS Th ...
-
ZyXEL Communications N300 - page 86
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 86 8.10 WPS Screen Use this screen to enable/disable WPS, view or gener ate a new PIN number and check current WPS status. T o open this screen, click Configuration > Network > Wireless LAN > WPS . Note: With WPS, wireless clients can only co nnect to the wireless ne twork using the firs t ...
-
ZyXEL Communications N300 - page 87
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 87 8.1 1 WPS St ation Screen Use this screen when you want to add a wireless station using WPS . T o open this screen, click Configuration > Network > Wireless LAN > WPS St ation . Note: After you click Push Button on this screen, y ou have t o press a similar button in the wireless statio ...
-
ZyXEL Communications N300 - page 88
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 88 8.12 Scheduling Screen Use this screen to set the times your wireless LAN is turned on and off . Wireless LAN scheduling is disabled by default. The wireless LAN can be schedul ed to turn on or off on certain days an d at certain times. T o ope n this screen, click Co nfiguration > Network &g ...
-
ZyXEL Communications N300 - page 89
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 89 8.13 WDS A Wireless Distribution System is a wireless connection between two or more APs. Use this screen to set the operating mode of your EMG1302-R10A to AP + Bridge or Bridge Only and establish wireless links with other APs. Y ou need to know the MAC address of the peer device, which also mus ...
-
ZyXEL Communications N300 - page 90
Chapter 8 Wireless LAN EMG1302-R10A User’s Guide 90 ...
-
ZyXEL Communications N300 - page 91
EMG1302-R10A User’s Guide 91 C HAPTER 9 LAN 9.1 Overview This chapter describes how to configure LAN settings. A Local Area Network (LAN) is a shared communication system to which many computers are attached. A LAN is a computer network limited to the immediate area, usually the same b uilding or floor of a building. The LAN screens can help you ...
-
ZyXEL Communications N300 - page 92
Chapter 9 LAN EMG1302-R10A User’s Guide 92 9.3 What Y ou Need T o Know The actual physical connection determines whether the EMG1302-R10A ports are LAN or WAN ports. There are two separ ate IP networks, one inside th e LAN network and the other outside the W AN network as shown next. Figure 49 LAN and WAN IP Addresses The LAN parameters of the EM ...
-
ZyXEL Communications N300 - page 93
Chapter 9 LAN EMG1302-R10A User’s Guide 93 9.4 LAN IP Screen Use this screen to change the IP address for your EMG1302-R10A. Click Configuration > Network > LAN > IP . Figure 50 Configuration > Network > LAN > IP The following table describes the labels in this screen. T a ble 32 Conf iguration > Network > LAN > IP LABE ...
-
ZyXEL Communications N300 - page 94
Chapter 9 LAN EMG1302-R10A User’s Guide 94 ...
-
ZyXEL Communications N300 - page 95
EMG1302-R10A User’s Guide 95 C HAPTER 10 DHCP Server 10.1 Overview Dynamic Host Configuration Protocol (DHCP), RF C 2131 and RFC 2132 allow individual clients to obtain TCP/IP configur ation at start-up from a server . Y ou can configure the EMG1302-R10A’s LAN as a DHCP server or disable it. When configured as a serv er , the EMG1302-R10A provi ...
-
ZyXEL Communications N300 - page 96
Chapter 10 DH CP Server EMG1302-R10A User’s Guide 96 10.4 The DHCP General Screen Use this screen to enable the DHCP server . Click Configuration > Network > DHCP Server . The General scre en displays. Figure 51 Configuration > Network > DHCP Server > General The following table describes the labels in this screen. T a ble 33 Co nf ...
-
ZyXEL Communications N300 - page 97
Chapter 10 DHCP Server EMG1302-R10A User’s Guide 97 10.5 The DHCP Advanced Screen This screen allows you to assign IP addresses on the LAN to specific individual computers based on their MAC addresses. Y ou can also use this screen to configure the DNS server information that the EMG1302-R10A sends to the DHCP clients. T o change your EMG1302-R10 ...
-
ZyXEL Communications N300 - page 98
Chapter 10 DH CP Server EMG1302-R10A User’s Guide 98 10.6 The DHCP Client List Screen This screen allows you to review the list of the devices currently connected to the EMG1302-R10A. T o view your EMG1302-R10A’s DHCP client list, click Configuration > Network > DHCP Serve r > Client List . The following screen displays. Figure 53 Conf ...
-
ZyXEL Communications N300 - page 99
Chapter 10 DHCP Server EMG1302-R10A User’s Guide 99 MAC Address Every Ethernet device has a unique MAC (Media Acce ss Control) address. The MAC address is assigned at the fact ory and consists of six pairs of hexade cimal characters, for example, 00:A0:C5:00:00:0 2. This indicates the MAC addr ess of the client device. Res er ve Select this if yo ...
-
ZyXEL Communications N300 - page 100
Chapter 10 DH CP Server EMG1302-R10A User’s Guide 100 ...
-
ZyXEL Communications N300 - page 101
EMG1302-R10A User’s Guide 101 C HAPTER 11 Quality of Service (QoS) 1 1.1 Overview Use the QoS screen to set up your EMG1302-R10A to use QoS for traffic management. Quality of Service (QoS) refers to both a network’ s ability to deliver data with minimum dela y , and the networking methods used to control bandwidt h. QoS allows the EMG1302-R10A ...
-
ZyXEL Communications N300 - page 102
Chapter 11 Qual ity of Service (QoS) EMG1302-R10A User’s Guide 102 1 1.1.1 What Y ou Can Do in the QoS Screens •U s e t h e General screen ( Section 11.2 on page 102 ) to enable QoS on the EMG1302-R10A, and specify the type of scheduling. •U s e t h e Rule-based QoS screen ( Section 11.3 on page 103 ) to define and setup QoS-specific rules. 1 ...
-
ZyXEL Communications N300 - page 103
Chapter 11 Quality of Service (QoS) EMG1302-R10A User’s Guide 103 The following table describes the labels in this screen. 1 1.3 The Rule-based QoS Screen Click Configuration > Network > QoS > Queue to open the screen as shown next. Figure 56 Configuration > Network > QoS > Queue T a ble 36 Conf iguration > Net work > QoS ...
-
ZyXEL Communications N300 - page 104
Chapter 11 Qual ity of Service (QoS) EMG1302-R10A User’s Guide 104 The following table describes the labels in this screen. 1 1.3.1 Adding a Rule Figure 57 Rule Setup: Edit The following table describes the labels in this screen. T a ble 37 Conf iguration > Net work > QoS > Qu eue LABEL DESCRIPTION # This is the i ndex number of the entr ...
-
ZyXEL Communications N300 - page 105
Chapter 11 Quality of Service (QoS) EMG1302-R10A User’s Guide 105 1 1.4 QoS T echnical Reference This section provides some technical background information about the topics co vered in this chapter . 1 1.4.1 IEEE 802.1p IEEE 802.1p specifies the user priority field and defines up to eight separate traffic types. The following table describes the ...
-
ZyXEL Communications N300 - page 106
Chapter 11 Qual ity of Service (QoS) EMG1302-R10A User’s Guide 106 The following table shows you the internal la yer-2 and layer-3 QoS mapping on the EMG1302- R10A. On the EMG1302-R10A, traffic assigned to high er priority queues gets through faster while traffic in lower index queues is dropped if the network is congested. T a ble 40 Internal La ...
-
ZyXEL Communications N300 - page 107
EMG1302-R10A User’s Guide 107 C HAPTER 12 NAT 12.1 Overview NA T (Network Address T ranslation - NA T , RFC 1631) is the translation of the IP address of a host in a packet. F or example, the source address of an outgoing packet, used within one network is changed to a different IP address known within another network. The figure below is a simpl ...
-
ZyXEL Communications N300 - page 108
Chapter 12 NAT EMG1302-R10A User’s Guide 108 •U s e t h e Port Forw ar ding screen to change your EMG1302-R10A’ s port forwarding settings ( Section 12.5 on page 110 ). •U s e t h e Port Trigger screen to view and configure your EMG1302-R10A’s trigger port settings ( Section 12.5 on page 110 ). •U s e t h e ALG screen to 12.3 What Y ou ...
-
ZyXEL Communications N300 - page 109
Chapter 12 NAT EMG1302-R10A User’s Guide 109 global address) back to the inside local address befo re forwarding it to the original inside host. Note that the IP address (either local or global) of an outside host is never changed. The global IP addresses for the inside hosts can be either static or dynamically assigned by the ISP . In addition, ...
-
ZyXEL Communications N300 - page 110
Chapter 12 NAT EMG1302-R10A User’s Guide 11 0 12.4 The NA T General Screen Use this screen to enable NA T and set a default server . Cl ick Configuration > Network > NAT to open the General screen. Figure 60 Configuration > Network > NA T > General The following table describes the labels in this screen. 12.5 The NA T Port Forwardi ...
-
ZyXEL Communications N300 - page 111
Chapter 12 NAT EMG1302-R10A User’s Guide 111 The following table describes the labels in this screen. 12.6 The NA T T rigger Port Screen Some services use a dedicated range of ports on the client side and a dedicated range of ports on the server side. With regular port forw arding you set a forwarding port in NA T to forward a service (coming in ...
-
ZyXEL Communications N300 - page 112
Chapter 12 NAT EMG1302-R10A User’s Guide 11 2 Use this screen to view and configure your EMG1302-R10A’ s trigger port settings. Click Configuration > Network > NAT > Port Trigger to open the Port Trigger screen. Figure 62 Configuration > Network > NA T > Port T rigger The following table describes the labels in this screen. T ...
-
ZyXEL Communications N300 - page 113
Chapter 12 NAT EMG1302-R10A User’s Guide 11 3 12.7 The ALG Screen Click Configuration > Network > NAT > ALG . The screen appears as shown. Figure 63 Configuration > Network > NA T > ALG The following table describes the labels in this screen. T a ble 45 Co nfiguration > Networ k > NA T > ALG LABEL DESCRIPTION ALG- SIP A ...
-
ZyXEL Communications N300 - page 114
Chapter 12 NAT EMG1302-R10A User’s Guide 11 4 ...
-
ZyXEL Communications N300 - page 115
EMG1302-R10A User’s Guide 11 5 C HAPTER 13 DDNS 13.1 Overview Dynamic Domain Name Service (DDNS) services le t y ou use a fixed domain name w ith a dynamic IP address. Users can always use the same domain name instead of a different dynamic IP address that changes each time to connect to the EMG1302-R10A or a server in your network. Note: The EMG ...
-
ZyXEL Communications N300 - page 116
Chapter 13 DDNS EMG1302-R10A User’s Guide 11 6 Service Provider Select the name of your Dy nami c DNS service provider . Host Name The host name is the domain name that the DDNS servi ce will map to your dynamic global IP address. T ype the host name fully qualified, for example, ‘yourhost.mydomain.net’ . Y ou can spe cify up to two host name ...
-
ZyXEL Communications N300 - page 117
EMG1302-R10A User’s Guide 11 7 C HAPTER 14 Routing 14.1 Overview This chapter shows you how to configure static routes for your EMG1302-R10A. Each remote node specifies only the network to which the gatew ay is directly connected, and the EMG1302-R10A has no knowledge of the networks beyond. For instance, the EMG1302-R10A knows about network N2 i ...
-
ZyXEL Communications N300 - page 118
Chapter 14 Routing EMG1302-R10A User’s Guide 11 8 The following table describes the labels in this screen. 14.2.1 Add/Edit St atic Route Screen T o add or edit a static route click the Add Static Route in Con figuration > Network > Stat ic Route > Static Route screen or click on Edit icon under Modify in configuration > Network > S ...
-
ZyXEL Communications N300 - page 119
Chapter 14 Routing EMG1302-R10A User’s Guide 11 9 14.3 The Dynamic Routing Screen Click Configuration > Network > Routing > Dynam ic Routing to open the Dy namic Ro uting screen. Figure 68 Configuration > Network > R outing > Dynamic Routing The following table describes the labels in this screen. Apply Click Apply to save your ...
-
ZyXEL Communications N300 - page 120
Chapter 14 Routing EMG1302-R10A User’s Guide 120 ...
-
ZyXEL Communications N300 - page 121
EMG1302-R10A User’s Guide 121 C HAPTER 15 Interface Group 15.1 Overview By default, all LAN and WAN interfaces on the EMG1302-R10A are in the same group and can communicate with each other . Y ou can create multiple groups to have the EMG1302-R10A assign the IP addresses in different domains to different groups. Each group acts as an independent ...
-
ZyXEL Communications N300 - page 122
Chapter 15 Interface Group EMG1302-R10A User’s Guide 122 15.2.1 Add Interface Group Click the Add button in the Interface Group screen to open the following screen. Use this screen to create a new interface group. Note: An interface can belong to a group only . Figure 70 Interface Group > Add New Group The following table describes the fields ...
-
ZyXEL Communications N300 - page 123
EMG1302-R10A User’s Guide 123 C HAPTER 16 Security 16.1 Overview Use these screens to enable and configure the firewa ll that protects your EMG1302-R10A and your LAN from unwan ted or malicious traffic. Enable the firewall to protect your LAN computers from attacks by hack ers on the Internet and control access between the LAN and W AN. By defaul ...
-
ZyXEL Communications N300 - page 124
Chapter 16 Securi ty EMG1302-R10A User’s Guide 124 16.3 What Y ou Need T o Know The following terms and concepts may he lp as y ou read through this chapter . What is a Firewall? Originally , the term “firewall” referred to a construc tion technique designed to prevent the spread of fire from one room to another . The networking term "fi ...
-
ZyXEL Communications N300 - page 125
Chapter 16 Security EMG1302-R10A User’s Guide 125 Guidelines For Enhancing Secu rity With Y our Firewall 1 Change the default password via W eb Configurator . 2 Think about access control before you connect to the network in any way , including attaching a modem to the port. 3 Limit who can access your router . 4 Don't enable any local servi ...
-
ZyXEL Communications N300 - page 126
Chapter 16 Securi ty EMG1302-R10A User’s Guide 126 16.5 The Firewall Services Screen If an outside user attempts to probe an unsupported port on your EMG1302-R10A, an ICMP response packet is automatically returned. This allows the outside user to know the EMG1302-R10A exists. Use this screen to prevent the ICMP respon se packet from being sent. T ...
-
ZyXEL Communications N300 - page 127
Chapter 16 Security EMG1302-R10A User’s Guide 127 See Section on page 199 for commonly used services an d port numbers. WAN Stealt h Mode Enable WAN Stealth Mode Enable Firewall Rule Enable Firewall Rule Select this check bo x to enable firewall rule and click Apply . Add Firewall Rule Service Nam e Enter a name that identifi es or describes th e ...
-
ZyXEL Communications N300 - page 128
Chapter 16 Securi ty EMG1302-R10A User’s Guide 128 ...
-
ZyXEL Communications N300 - page 129
EMG1302-R10A User’s Guide 129 C HAPTER 17 Content Filtering 17.1 Overview This chapter provides a brief overview of content filtering using the embedded web GUI. Internet content filtering allows you to create an d enforce Internet access policies tailored to your needs. Content filtering is the ability to block certain web features or specific U ...
-
ZyXEL Communications N300 - page 130
Chapter 17 Content Fil tering EMG1302-R10A User’s Guide 130 17.3 Content Filter Use this screen to restrict web features, add keywords for blocking and designate a trusted computer . Cl ick Configuration > Security > Content Filter to open the Content Filter screen. Figure 74 Configuration > Securit y > Content Filter The following ta ...
-
ZyXEL Communications N300 - page 131
Chapter 17 Content Filtering EMG1302-R10A User’s Guide 131 Cookies Used by W eb servers to track usage and provide service based on ID . We b P r o x y A server that acts as an intermediary be tween a user and the Intern et to provide security , administr ative cont rol, and caching service . When a proxy server i s located on the WAN it is possi ...
-
ZyXEL Communications N300 - page 132
Chapter 17 Content Fil tering EMG1302-R10A User’s Guide 132 ...
-
ZyXEL Communications N300 - page 133
EMG1302-R10A User’s Guide 133 C HAPTER 18 IPv6 Firewall 18.1 Overview 18.2 The IPv6 Firewall Screen Click Configuration > Security > IPv6 Firewall . The Service scre en appears as shown. Figure 75 Configuration > Security > IPv6 Firewall The following table describes the labels in this screen. T a ble 55 Configuration > Security &g ...
-
ZyXEL Communications N300 - page 134
Chapter 18 IPv6 Firewall EMG1302-R10A User’s Guide 134 Add Firewall Rule Service Name Enter a name that identifi es or descri bes the firewall rule. MAC Address Enter the MAC address of the comp uter for which the firewall rule applies. Dest IP Address Enter the IP address of the computer to which tr affic for the application or service is enteri ...
-
ZyXEL Communications N300 - page 135
EMG1302-R10A User’s Guide 135 C HAPTER 19 Remote Management 19.1 Overview This chapter provides information on the R emote Management screens. Remote Management allows you to manage your EMG1302-R10A from a remote location through the following interfaces: •L A N a n d W A N •L A N o n l y Note: The EMG1302-R10A is managed using the W eb Conf ...
-
ZyXEL Communications N300 - page 136
Chapter 19 Remote Management EMG1302-R10A User’s Guide 136 • Y our EMG1302-R10A can act as an SNMP agent, which allows a manager station to manage and monitor the EMG1302-R10A through the network. Use the SNMP screen to configure SNMP settings. Y ou can also specify from which IP addresses the access can come ( Section 19.6 on page 138 ). •U ...
-
ZyXEL Communications N300 - page 137
Chapter 19 Remote Management EMG1302-R10A User’s Guide 137 19.5 The T elnet Screen Y ou can use T elnet to access the EMG1302-R10A’s command line interface. Specify which interfaces allow T e lnet access and from which IP address the access can come. Click Configuration > Management > Remote MGMT > Telnet to display the screen as shown ...
-
ZyXEL Communications N300 - page 138
Chapter 19 Remote Management EMG1302-R10A User’s Guide 138 19.6 The SNMP Screen Simple Network Management Protocol is a protocol used for exchanging management information between network devices. Y our EMG13 02-R10A supp orts SNMP agent functionality , which allows a manager station to manage and monitor the EM G1302-R10A through the network. Th ...
-
ZyXEL Communications N300 - page 139
Chapter 19 Remote Management EMG1302-R10A User’s Guide 139 T o change your EMG1302-R10A’s SNMP settings, click Configuration > Management > Remote MGMT > SNMP to display the screen as shown. Figure 79 Configuration > Management > Remote MGMT > SNMP The following table describes the labels in this screen. T a ble 58 Conf igurat ...
-
ZyXEL Communications N300 - page 140
Chapter 19 Remote Management EMG1302-R10A User’s Guide 140 19.7 The TR069 Screen TR -069 defines how Customer Premise Equipment (CPE), f or example your Z yXEL Devic e, can be managed over the WAN by an Auto Conf iguration Server (ACS ). TR -06 9 is based on sendin g Remote Procedure Calls (RPCs) between an A CS and a client device. RPCs are sent ...
-
ZyXEL Communications N300 - page 141
Chapter 19 Remote Management EMG1302-R10A User’s Guide 141 ACS P assword Enter the TR -069 password fo r authentication with the au to-configur ation server . Connect ionRequ est Port Connect ion Requ est Username Enter the connecti on request user name . When the ACS makes a conne ction request to the EMG1302 -R10A, this user nam e is used to au ...
-
ZyXEL Communications N300 - page 142
Chapter 19 Remote Management EMG1302-R10A User’s Guide 142 ...
-
ZyXEL Communications N300 - page 143
EMG1302-R10A User’s Guide 143 C HAPTER 20 Universal Plug-and-Play (UPnP) 20.1 Overview This chapter introduces the UPnP feature in the web configur ator . Universal Plug and Play (UPnP) is a distributed, open networking standard that uses T CP/IP for simple peer-to-peer network connectivit y between devices. A UPnP device can dynamically join a n ...
-
ZyXEL Communications N300 - page 144
Chapter 20 Uni versal Plug-and-Pla y (UPnP) EMG1302-R10A User’s Guide 144 All UPnP-enabled devices may communicate freely with each other without additional configur ation. Disable UPnP if this is not your intention. 20.3 UPnP Screen Use this screen to enable UPnP on your EMG1302-R10A. Click Configuration > Management > UPnP to display the ...
-
ZyXEL Communications N300 - page 145
Chapter 20 Universal Plug-and-Play (UPnP) EMG1302-R10A User’s Guide 145 2 Right-click the icon and select Properties . Figure 82 Network Connections 3 In the Internet Connection Properties window , click Settings to see the port mappings there were automatically created. Figure 83 Internet Connection Properties ...
-
ZyXEL Communications N300 - page 146
Chapter 20 Uni versal Plug-and-Pla y (UPnP) EMG1302-R10A User’s Guide 146 4 Y ou may edit or delete the port mappings or click Add to manually add port mappings. Figure 84 Internet Connection Properties: Advanced Settings Figure 85 Internet Connection Properties: Advanced Settings: Add Note: When the UPnP-enabled devi ce is di sconnected from you ...
-
ZyXEL Communications N300 - page 147
Chapter 20 Universal Plug-and-Play (UPnP) EMG1302-R10A User’s Guide 147 6 Double-click on the icon to display your cur rent Internet connection status. Figure 87 Internet Connection Status 20.4.2 We b Configurator Easy Access With UPnP , you can access the web-based configur ator on the EMG1302-R10A without finding out the IP address of the EMG13 ...
-
ZyXEL Communications N300 - page 148
Chapter 20 Uni versal Plug-and-Pla y (UPnP) EMG1302-R10A User’s Guide 148 3 Select My Network Places und er Other Places . Figure 88 Network Connections 4 An icon with the description for each UPnP-e nabled device displays under Local Network . 5 Right-click on the icon for y our EMG1302-R10A and select Invoke . The web configurator login screen ...
-
ZyXEL Communications N300 - page 149
Chapter 20 Universal Plug-and-Play (UPnP) EMG1302-R10A User’s Guide 149 6 Right-click on the icon for y our EMG1302-R10A and select Properties . A properties window displays with basic information about the EMG1302-R10A. Figure 90 Network Connections: My Network Places: Properties: Example ...
-
ZyXEL Communications N300 - page 150
Chapter 20 Uni versal Plug-and-Pla y (UPnP) EMG1302-R10A User’s Guide 150 ...
-
ZyXEL Communications N300 - page 151
EMG1302-R10A User’s Guide 151 C HAPTER 21 Maintenance 21.1 Overview This chapter provides information on the Maintenance screens. 21.2 What Y ou Can Do •U s e t h e General screen to set the timeout period of the management session ( Section 21.3 on page 151 ). •U s e t h e Password screen to change your EMG1302-R10A’s system password ( Sec ...
-
ZyXEL Communications N300 - page 152
Chapter 21 Maintenance EMG1302-R10A User’s Guide 152 The following table describes the labels in this screen. 21.4 Account Screen It is strongly recommended that you change your EMG1302-R10A's password. If you forget your EMG1302-R10A's password (or IP address), you will need to reset the device. See Section 21.8 on page 158 for details ...
-
ZyXEL Communications N300 - page 153
Chapter 21 Maintenance EMG1302-R10A User’s Guide 153 In User Account Entries in Maintenance > Account > User Account , click Edit icon under Modify . The screen appears as shown. Figure 93 Maintenance > Password The following table describes the labels in this screen. T a ble 63 Maintenance > Account > User Account > Edit LABEL ...
-
ZyXEL Communications N300 - page 154
Chapter 21 Maintenance EMG1302-R10A User’s Guide 154 21.5 T ime Setting Screen Use this screen to configure the EMG1302-R10A’s time based on your local time zone. T o change your EMG1302-R10A’s time and date, click Maintenance > Time . The screen appears as shown. Figure 94 Maintenance > Time The following table describes the labels in ...
-
ZyXEL Communications N300 - page 155
Chapter 21 Maintenance EMG1302-R10A User’s Guide 155 21.6 Firmware Upgrade Screen Find firmware at www .zyxel.com in a file that (usually) uses the system model name with a “*.bin” extension, e.g. , “EMG1302-R10A. bin” . The upload pr ocess uses HTTP (Hypertext T ransfer Protocol) and may take up to two minutes. After a successful upload, ...
-
ZyXEL Communications N300 - page 156
Chapter 21 Maintenance EMG1302-R10A User’s Guide 156 Click Maintenance > Fi rmware Upgrade . Follow the instructions in this screen to upload firmware to your EMG1302-R10A. Figure 95 Maintenance > Firmware Upgr ade The following table describes the labels in this screen. Caution: Do not turn of f the EMG1302-R10A while firmware upload is in ...
-
ZyXEL Communications N300 - page 157
Chapter 21 Maintenance EMG1302-R10A User’s Guide 157 recommended that you back up y our configuration file before making configur ation changes. The backup configuration file will be useful in case you need to return to your previous settings. Restore configur ation allows you to upload a new or previously saved configur ation file from your comp ...
-
ZyXEL Communications N300 - page 158
Chapter 21 Maintenance EMG1302-R10A User’s Guide 158 Note: If yo u uploaded the default conf igurat ion file you may need to change the IP address of your computer to be in the sa me subnet as that of the default EMG1302- R10A IP address (192.168.1.2) . See Appendix C on p age 193 for details on how to set up your computer’ s IP address. 21.8 R ...
-
ZyXEL Communications N300 - page 159
EMG1302-R10A User’s Guide 159 C HAPTER 22 Troubleshooting 22.1 Overview This chapter offers some suggestions to solve problems you might encounter . The potential problems are divided into the following categories. • Po wer , Hardware Connections, and LEDs • EMG1302-R10A Access and Login • Internet Access • R esetting the EMG1302-R10A to ...
-
ZyXEL Communications N300 - page 160
Chapter 22 Tro ubleshooting EMG1302-R10A User’s Guide 160 22.3 EMG1302-R10A Access and Login I don’t know the IP address of my EMG1302-R10A. 1 The default IP address is 192.168.1.1 . 2 If you changed the IP address and have forgotten it, you might get the IP address of the EMG1302- R10A by looking up the IP address of the default gateway for y ...
-
ZyXEL Communications N300 - page 161
Chapter 22 Troubl eshooting EMG1302-R10A User’s Guide 161 3 Make sure y our Internet browser does not block pop-up windows and h as JavaScript and Jav a enabled. See Appendix B on page 173 . 4 Make sure your computer is in the same subnet as the EMG1302-R 10A. (If you know that there are routers between your computer and the EMG1302-R10A, skip th ...
-
ZyXEL Communications N300 - page 162
Chapter 22 Tro ubleshooting EMG1302-R10A User’s Guide 162 1 Check the hardware connections, and make sure th e LEDs are behaving as expected. See the Quick Start Guide. 2 If you are trying to access the Internet wirelessly , make sure the wireless settings in the wireless client are the same as the settings in the AP . 3 Disconnect all the cables ...
-
ZyXEL Communications N300 - page 163
Chapter 22 Troubl eshooting EMG1302-R10A User’s Guide 163 Y ou will lose all of y our changes when you push the RESET button. T o reset the EMG1302-R10A: 1 Make sure the power LED is on. 2 Press the RESET button for longer than 1 second to restart/reboot the EMG1302-R10A. 3 Press the RESET button for longer than five seconds to set the EMG1302-R1 ...
-
ZyXEL Communications N300 - page 164
Chapter 22 Tro ubleshooting EMG1302-R10A User’s Guide 164 Make sure that you select the Enable URL Keyword Bloc king check box in the Content Filtering screen. Make sure that the k eywords that you type are listed in the Keyword List . I can access the Internet, but I cannot open my network folders. Make sure your account has access rights to the ...
-
ZyXEL Communications N300 - page 165
Chapter 22 Troubl eshooting EMG1302-R10A User’s Guide 165 ...
-
ZyXEL Communications N300 - page 166
EMG1302-R10A User’s Guide 166 A PPENDIX A Customer Support In the event of problems th at cannot be solved by using this manual, you should contact your vendor . If you cannot contact y our vendor , then contact a ZyXEL office for the region in w hich you bought the device. Regional websites are listed below (see also http://www .zyxel.com/ about ...
-
ZyXEL Communications N300 - page 167
Appendix A Customer Suppo rt EMG1302-R10A User’s Guide 167 Korea • Z yXEL K orea Corp. • http://www.zyx el.kr Malaysia • Z yXEL Malaysia Sdn Bhd. • http://www.zyx el.com.my Pakist an • ZyXEL P akistan (Pvt.) Ltd. • http://www .zyxel.com.pk Philipines • Z yXEL Philippines • http://www .zyxel.com.ph Singapore • Z yXEL Singapore Pt ...
-
ZyXEL Communications N300 - page 168
Appendix A Customer Support EMG1302-R10A User’s Guide 168 Belgium • Z yXEL Communications B.V . • http://www .zyxel.com/be/nl/ Bulgaria •Z y X E L България • http://www.zyx el.com/bg/bg/ Czech • Z yXEL Communications Czech s.r .o • http://www.zyx el.cz Denmark • Z yXEL Communications A/S • http://www.zyx el.dk Estonia •Z ...
-
ZyXEL Communications N300 - page 169
Appendix A Customer Suppo rt EMG1302-R10A User’s Guide 169 Lithuania • Z yXEL Lithuania • http://www .zyxel.com/lt/lt/homepage.shtml Netherlands •Z y X E L B e n e l u x • http://www.zyx el.nl Norway • Z yXEL Communications • http://www.zyx el.no Poland • Z yXEL Communications Poland • http://www.zyx el.pl Romania •Z y X E L R o ...
-
ZyXEL Communications N300 - page 170
Appendix A Customer Support EMG1302-R10A User’s Guide 170 T urkey •Z y X E L T u r k e y A . S . • http://www.zyx el.com.tr UK • Z yXEL Communications UK Ltd. • http://www.zyx el.co.uk Ukraine •Z y X E L U k r a i n e • http://www .ua.zyxel.com Latin America Argentina • Z yXEL Communication Corpor ation • http://www.zyx el.com/ec/ ...
-
ZyXEL Communications N300 - page 171
Appendix A Customer Suppo rt EMG1302-R10A User’s Guide 171 Oceania Australia • Z yXEL Communications Corporation • http://www .zyxel.com/au/en/ Africa South Africa • Nology (Pty) Ltd. • http://www.zyx el.co.za ...
-
ZyXEL Communications N300 - page 172
Appendix A Customer Support EMG1302-R10A User’s Guide 172 ...
-
ZyXEL Communications N300 - page 173
EMG1302-R10A User’s Guide 173 A PPENDIX B Pop-up Windows, JavaScript and Java Permissions In order to use the web configur ator you need to allow: • W eb browser pop-up windows from your device. • Jav aScript (enabled by default). • Jav a permissions (enabled by default). Note: The screens used below belong to Intern et Explorer versi on 6, ...
-
ZyXEL Communications N300 - page 174
Appendix B Pop-up Windows, JavaScript and Java Permissions EMG1302-R10A User’s Guide 174 2 Clear the Block pop-ups check box in the Pop-up Blocker section of the screen. This disables any web pop-up blockers you may have enabled. Figure 100 Internet Options: Privacy 3 Click Apply to save this setting. Enable Pop-up Blockers with Exceptions Altern ...
-
ZyXEL Communications N300 - page 175
Appendix B Pop-up Windows, JavaScrip t and Java Permissions EMG1302-R10A User’s Guide 175 2 Select Settings… to open the Pop-up Bloc ker Settings screen. Figure 101 Internet Options: Privacy 3 T ype the IP address of your device (the web page that you do not want to have blocke d) with the prefix “http://” . For example, http://192.168.167. ...
-
ZyXEL Communications N300 - page 176
Appendix B Pop-up Windows, JavaScript and Java Permissions EMG1302-R10A User’s Guide 176 4 Click Add to move the IP address to the list of Allowed sites . Figure 102 Pop-up Block er Settings 5 Click Close to return to the Privacy screen. 6 Click Apply to save this setting. JavaScript If pages of the we b configurator do not display properly in In ...
-
ZyXEL Communications N300 - page 177
Appendix B Pop-up Windows, JavaScrip t and Java Permissions EMG1302-R10A User’s Guide 177 1 In Internet Explorer , click Tools , Internet Options and then the Security tab. Figure 103 Internet Options: Security 2 Click the Custom Level... button. 3 Scroll down to Scripting . 4 Under Active scripting make sure that Enable is selected (the default) ...
-
ZyXEL Communications N300 - page 178
Appendix B Pop-up Windows, JavaScript and Java Permissions EMG1302-R10A User’s Guide 178 6 Click OK to close the window. Figure 104 Security Settings - Jav a Scripting Java Permissions 1 From Internet Explorer , click Tools , Internet Opti on s and then the Security tab. 2 Click the Custom Level... button. 3 Scroll down to Microsoft VM . 4 Under ...
-
ZyXEL Communications N300 - page 179
Appendix B Pop-up Windows, JavaScrip t and Java Permissions EMG1302-R10A User’s Guide 179 5 Click OK to close the window. Figure 105 Security Settings - Jav a JA V A (Sun) 1 From Internet Explorer , click Tools , Internet Opti on s and then the Advance d tab . 2 Make sure that Use Java 2 for <applet> under Java (Sun) is selected. ...
-
ZyXEL Communications N300 - page 180
Appendix B Pop-up Windows, JavaScript and Java Permissions EMG1302-R10A User’s Guide 180 3 Click OK to close the window. Figure 106 Java (Sun) Mozilla Firefox Mozilla Firefox 2.0 screens are used here. Screens for other v ersions may vary slightly . The steps below apply to Mozilla Firefox 3.0 as well. Y ou can enable Java, Ja vascript and pop-up ...
-
ZyXEL Communications N300 - page 181
Appendix B Pop-up Windows, JavaScrip t and Java Permissions EMG1302-R10A User’s Guide 181 Click Content to show the screen below . Se lect the check box es as shown in the following screen. Figure 108 Mozilla Firefox Content Security Opera Opera 10 screens are used here. Screens for o ther versions may v ary slightly . ...
-
ZyXEL Communications N300 - page 182
Appendix B Pop-up Windows, JavaScript and Java Permissions EMG1302-R10A User’s Guide 182 Allowing Pop-Ups From Opera, click Tools , then Preferences . In the General tab, go to Choose how you prefer to handle pop-ups and select Open all pop-ups . Figure 109 Opera: Allowing P op-Ups Enabling Java From Opera, click Tools , then Preferences . In the ...
-
ZyXEL Communications N300 - page 183
Appendix B Pop-up Windows, JavaScrip t and Java Permissions EMG1302-R10A User’s Guide 183 T o customize JavaScript behavior in the Oper a browser , click JavaScript Options . F i g u r e 111 Op era: JavaScript Options Select the items you want Opera’ s JavaScript to apply . ...
-
ZyXEL Communications N300 - page 184
Appendix B Pop-up Windows, JavaScript and Java Permissions EMG1302-R10A User’s Guide 184 ...
-
ZyXEL Communications N300 - page 185
EMG1302-R10A User’s Guide 185 A PPENDIX C Wireless LANs Wireless LAN T opolo gies This section discusses ad-hoc and infrastructure wireless LAN topologies. Ad-hoc Wireless LAN Configuration The simplest WLAN configuration is an indepe ndent (Ad-hoc) WLAN that connects a set of computers with wireless adapters (A, B, C). Any time two or more wirel ...
-
ZyXEL Communications N300 - page 186
Appendix C Wireless LANs EMG1302-R10A User’s Guide 186 disabled, wireless client A and B can still access the wired network but cannot communicate with each other . Figure 1 13 Basic Service Set ESS An Extended Service Set (ESS) consists of a series of overlapping BSSs, each containing an access point, with each access point connected together by ...
-
ZyXEL Communications N300 - page 187
Appendix C Wireless LANs EMG1302-R10A User’s Guide 187 An ESSID (ES S IDentification) uniquely identifies each ESS. All access points and their associated wireless clients within the same ESS must have the same ES SID in order to communicate. Figure 1 14 Infrastructure WLAN Channel A channel is the radio frequency(ies) used by wireless devices to ...
-
ZyXEL Communications N300 - page 188
Appendix C Wireless LANs EMG1302-R10A User’s Guide 188 cannot "hear" each other , that is they do not know if the channel is currently being used. Therefore, they are considered hidden from each othe r . Figure 1 15 RTS/CT S When station A sends data to the AP , it might not know that th e station B is already using th e channel. If the ...
-
ZyXEL Communications N300 - page 189
Appendix C Wireless LANs EMG1302-R10A User’s Guide 189 If the Fragmentation Threshold value is smaller than the RTS/CT S value (see previously) you set then the R TS (Request T o Send)/CTS (Clear to Send) handshake will never occur as data frames will be fragmented before they reach RTS/CTS size. Preamble T ype Preamble is used to signal that dat ...
-
ZyXEL Communications N300 - page 190
Appendix C Wireless LANs EMG1302-R10A User’s Guide 190 The following figure shows the relative effectivenes s of these wireless security methods available on your EMG1302-R10A. Note: Y ou must enable the same wireless se curity settings on the EMG1302-R 10A and on all wireless clients that y ou want to associ ate with it. IEEE In June 2001, the I ...
-
ZyXEL Communications N300 - page 191
Appendix C Wireless LANs EMG1302-R10A User’s Guide 191 T ypes of RADIUS Messages The following types of RADIUS messages are ex changed between the access point and the R ADIUS server for user authen tication: • Access-Request Sent by an access point requesting authentication. • Access-Reject Sent by a RADIUS server rejecting access. • Acces ...
-
ZyXEL Communications N300 - page 192
Appendix C Wireless LANs EMG1302-R10A User’s Guide 192 encrypting the password with the challenge and sends back the information. P ass word is not sent in plain text. However , MD5 authentication has some weaknesses. Since the authentication serv er needs to get the plaintext passwords, the passwords must be stored. Thus someone other than the a ...
-
ZyXEL Communications N300 - page 193
Appendix C Wireless LANs EMG1302-R10A User’s Guide 193 For added securit y , certificate-based authentica tions (EAP- TLS, EAP- T TLS and PEAP) use dynamic keys for data encryption. They are often deplo y ed in corpor ate environments, but for public deployment, a simple user name and password pair is more pr actical. The following table is a com ...
-
ZyXEL Communications N300 - page 194
Appendix C Wireless LANs EMG1302-R10A User’s Guide 194 The RADIUS server distributes a P airwise Master K e y (PMK) key to the AP that then sets up a k ey hierarchy and management system, using the PMK to dynamically generate unique data encryption keys to encrypt every data pack et that is wire lessly communicated between the AP and the wireless ...
-
ZyXEL Communications N300 - page 195
Appendix C Wireless LANs EMG1302-R10A User’s Guide 195 2 The RADIUS server then checks the user's identification against its database and grants or denies network access accordingly . 3 A 256-bit Pairwise Master K ey (PM K) is derived from the authentication process by the RADIUS server and the client. 4 The RADIUS server distributes the PMK ...
-
ZyXEL Communications N300 - page 196
Appendix C Wireless LANs EMG1302-R10A User’s Guide 196 4 The AP and wireless clie nts use the TKIP or AE S encryption process, the PMK and information exchanged in a handshake to create tempor al encryp tion keys. They use these keys to encrypt data exchanged between them. Figure 1 17 WPA(2)-PSK Authentication Security Pa rameters Summary R efer ...
-
ZyXEL Communications N300 - page 197
Appendix C Wireless LANs EMG1302-R10A User’s Guide 197 Antenna Overview An antenna couples RF signals onto air . A transmitter within a wireless device sends an RF signal to the antenna, which propagates the signal through th e air . The antenna also operates in rev erse by capturing RF signals from the air . Po sitioning the antennas properly in ...
-
ZyXEL Communications N300 - page 198
Appendix C Wireless LANs EMG1302-R10A User’s Guide 198 Positioning Antennas In general, antennas should be mounted as high as practically possible and free of obstructions. In point-to–point application, position both antennas at the same height and in a direct line of sight to each other to attain the best performance. For omn i-directional an ...
-
ZyXEL Communications N300 - page 199
EMG1302-R10A User’s Guide 199 A PPENDIX D Common Services The following table lists some commonly-used services and their associated protocols and port numbers. For a comprehensive list of port number s, ICMP t ype/code numbers and services, visit the IANA (I nternet A ssigned Number Authority) web site. • Name : This is a short, descriptive na ...
-
ZyXEL Communications N300 - page 200
Appendix D Common Services EMG1302-R10A User’s Guide 200 HT TP TC P 80 Hyper T ext T ransfer Protocol - a client/ server protocol for the worl d wide web. HT TPS TC P 443 HTTPS is a secured http session often u sed in e-commer ce. ICMP User-Defined 1 Internet Control Message Protocol is often used for diagnostic or routing purposes. ICQ UDP 4000 ...
-
ZyXEL Communications N300 - page 201
Appendix D Common Services EMG1302-R10A User’s Guide 201 SMTP TCP 25 Simple Mail T ransfer Protocol is the message-exchange standard for the Internet. SMTP enab les y ou to move messages from one e-mail server to another . SNMP TCP /U DP 16 1 Simple Network Manage ment Program. SNMP- TRAPS TCP /U D P 162 T raps for use with the SNMP (R FC:1215). ...
-
ZyXEL Communications N300 - page 202
Appendix D Common Services EMG1302-R10A User’s Guide 202 ...
-
ZyXEL Communications N300 - page 203
EMG1302-R10A User’s Guide 203 A PPENDIX E Legal Information Copyright Copyright © 2013 by Z y XEL Communications Corporation. The contents of this publication may not be repr oduced in any part or as a whole, tr anscribed, stored in a retrieval system, translated into an y language, or transmitted in any form or by an y means, electronic, mechan ...
-
ZyXEL Communications N300 - page 204
Appendix E Legal In formation EMG1302-R10A User’s Guide 204 4 Consult the de aler or an exp erienced radio/TV tec hnician for help. FCC Radiation Expos ure St at ement • This transmitter must not be co-located or operating in conjunction with any oth er antenna or transmitter . • IEEE 802.11b or 802.11g operation of this prod uct in the U .S. ...
-
ZyXEL Communications N300 - page 205
Appendix E Legal Information EMG1302-R10A User’s Guide 205 Registration R egister your product online to receive e-mail notices of firmware upgr ade s and information at www .zyxel.com for global products, or at www .us.zyxel.com for North American products. Open Source Licenses This product contains in part some free software distributed under G ...
-
ZyXEL Communications N300 - page 206
Appendix E Legal In formation EMG1302-R10A User’s Guide 206 National Restrictions This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ay ant transpo ...
-
ZyXEL Communications N300 - page 207
Appendix E Legal Information EMG1302-R10A User’s Guide 207 The Belgian Institute for Postal Services and T elecommunications (BIPT) must be notified of any outdoor wireless link h aving a range ex ceeding 300 meters. Please check http:// www . bipt.be for more details. Draadloze verbindingen voor buitengebruik en met een re ikwijdte van meer dan ...
-
ZyXEL Communications N300 - page 208
Appendix E Legal In formation EMG1302-R10A User’s Guide 208 List of national codes Safety Warnings • Do NO T use this product near water , for exam ple, in a wet basement or near a swim ming pool. • Do NO T expose your device to dampness, dust or corrosive liquids. • Do NO T store things on the device. • Do NOT install, use, or service th ...
-
ZyXEL Communications N300 - page 209
Appendix E Legal Information EMG1302-R10A User’s Guide 209 • If you wall mount y our device, make sure that no electrical lines, gas or water pipes will be damaged. Y our product is marked with this symb ol, which is known as the WEEE mark. WEEE stands for W aste Electronics and Electrical Equipment. It means that used electrical and electronic ...
-
ZyXEL Communications N300 - page 210
Appendix E Legal In formation EMG1302-R10A User’s Guide 210 ...
-
ZyXEL Communications N300 - page 211
Index EMG1302-R10A User’s Guide 21 1 Index Numbers 802.1p 105 A ActiveX 130 Address Assignment 54 Advanced Encryption Standard See AES. AES 193 antenna directional 197 gain 197 omni-directional 197 AP 13 AP (access point) 187 AP+Bridge 13 B Basic Service Set, See BSS 185 Bridge/Repeater 13 BSS 185 C CA 192 Certificate Authority See CA. certificat ...
-
ZyXEL Communications N300 - page 212
EMG1302-R10A User’s Guide 212 Index E EAP Authentication 191 encryption 75 , 193 and local (user) database 76 key 76 WPA compatible 76 ESS 186 ESSID 163 Extended Service S et, See ESS 186 F FCC interference statement 203 Firewall 124 Firewal l overvi ew guidelines 125 network security Stateful inspection 124 Z yXEL device firewall 124 firewall st ...
-
ZyXEL Communications N300 - page 213
Index EMG1302-R10A User’s Guide 213 cloning 55 MAC address filter 74 MAC address filtering 83 MAC filter 83 managing the device good habits 13 using the web configurator . See web configur ator . usi ng the WPS. See W PS. MBSSID 13 Media access control 83 Memory usage 36 Message Integrity Check (MIC) 193 mode 13 Multicast 55 IGMP 55 N NA T 107 , ...
-
ZyXEL Communications N300 - page 214
EMG1302-R10A User’s Guide 214 Index S safety warnings 208 Scheduling 88 Service Set 77 , 82 Service Set IDentification 77 , 82 Service Set IDentity . See SSID . SSID 74 , 77 , 82 stateful inspection firewall 123 Static DHCP 97 , 98 Static Route 11 7 Status 34 Subnet Mask 93 Summary DHCP table 29 Pack et statistics 30 Wireless station status 31 Sy ...
-
ZyXEL Communications N300 - page 215
Index EMG1302-R10A User’s Guide 215 WPA2-PSK 193 , 194 application example 195 WPA -PSK 19 3 , 194 application example 195 WPS 13 ...
-
ZyXEL Communications N300 - page 216
EMG1302-R10A User’s Guide 216 Index ...
Haben Sie eine Frage bezüglich ZyXEL Communications N300?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit ZyXEL Communications N300 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit ZyXEL Communications N300 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.