-
Haier HWM80-27S - page 1
T win-tub Washing Machine User's manual This manual is for HWM80-27S Please read this manual carefully before using. Retain it for future reference. ...
-
Haier HWM80-27S - page 2
Contents Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Packing list *Specification Names of the parts Trouble-Shooting *Answer to question ...
-
Haier HWM80-27S - page 3
1 Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user . Contents marked with that ...
-
Haier HWM80-27S - page 4
2 Safety precautions Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If pos sible,please adopt electric leakage protector. When the machine is normally using, please put the power plug at the location easily t ...
-
Haier HWM80-27S - page 5
3 Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. T ake special care of the children. Safety precautions Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter the machine by yourself. Handicapped or children without care shall no ...
-
Haier HWM80-27S - page 6
Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Installa tion and adjustment Voltage change This washer is assembled for 220V , but can be changed from 220V to 127V . Check your electrical source and follow the diagram below to convert voltage ...
-
Haier HWM80-27S - page 7
5 ...
-
Haier HWM80-27S - page 8
If the extra hose is too long, cut it either at point A or B. <10cm B A > 3 0 m m <1.5m Installa tion and adjustment Usage of the drain hose The drainage shall be smooth with the drain hose. 1.The height of the drain hose shall be less than 10cm , or the drainage will not be smooth enough and cause incomplete drainage. 2.Do not tramp or pr ...
-
Haier HWM80-27S - page 9
How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Then hang the drain hose into the hanging hole at the spin tub side. (As per Figure 5 ). Extend the drain hose from the side of spin tub. Extend the drain hose from the rear side Take out the drain hose from the fixing hook. Ext ...
-
Haier HWM80-27S - page 10
Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please mak ...
-
Haier HWM80-27S - page 11
The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The thickness ,size , type of the cloth will influ- ence the actual washing capacity. It is suit- abl ...
-
Haier HWM80-27S - page 12
OFF WASH TIMER Figure 5 DRAIN ST ANDARD GENTLE WASH SELECT OR Washing sequence Figure 1 Figure 2 Spin timer SPIN WASH Wash timer Wash selector Buzzer Water-filling entrance (T o set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). (standard current, gentle current) (The buzzer will ring whe ...
-
Haier HWM80-27S - page 13
Midway spinning Push Push Proper Proper Outer cover of The spin tub Inner cover of The spin tub The laundries are slanting Gland No gland (1) Open the outer cover of the spin tub. (2) Set the water-filling selector control rod at the "SPIN" side. Fill water for about 1 minute. If the water quantity filled is too large, the water may flow ...
-
Haier HWM80-27S - page 14
Rinse with stored water Rinse with water-filing 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Ad just the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is below 2.4kg, please use "Gentle" current. If you use "Standard&qu ...
-
Haier HWM80-27S - page 15
1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop ...
-
Haier HWM80-27S - page 16
After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. 1 T ake off the overflow filter. As indicated in the figure, nip the elastic fixing claw and pull it to the direction of ...
-
Haier HWM80-27S - page 17
Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty Do not wash it directly by water Cleaning the overflow filter 2. T ake off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean the lint around t ...
-
Haier HWM80-27S - page 18
T ro uble-shooting Ans wer to question When the remained water is frozen Prevent the freezing (be sure to discharge the water completely after using) After complete draining, set the "WASH SELECTOR" at "GENTLE" or "STANDARD". If it is set at "DRAIN", it will be rather difficult for the frozen water to melt. W ...
-
Haier HWM80-27S - page 19
T ro uble-shooting Ans wer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do ...
-
Haier HWM80-27S - page 20
W ater inlet hose Gland Lint filter Packing list Twin-tub washing machine Name Quantity User's manual One piece One piece One piece One piece One set W ater level/Water quantity (about) Maximum/55L Medium/46L Minimum/36L Injection pressure(MPa ) Specification Rated spinning capacity(kg) 8.0 0.02~0.2 Rated washing capacity(kg) 7.2 MADE IN CHINA ...
Haben Sie eine Frage bezüglich Haier HWM80-27S?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Haier HWM80-27S nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Haier HWM80-27S hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.