Bedienungsanleitung POSIFLEX Business Machines LS-1000

22 Seiten 0.37 mb
Download

Zur Seite of 22

Summary
  • POSIFLEX Business Machines LS-1000 - page 1

    FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to EN55022 and 47 CFR, Part 2 and subpart J of Part 15 o ...

  • POSIFLEX Business Machines LS-1000 - page 2

    FUNDAMENTAL INFORMA TION MODEL NAME : LS- 1000 CONTENT ( Besides this guide) : Fig . 1 Box content besides this g uide INSTALLATION GUIDES 1. Install the USB or RS232 interface cable onto the scanner by inserting the 8 pin RJ45 type modular plug ( Fig. 2 ) of the cable into the scanner until a firm click is heard. 2. Use the stand fixing screw to f ...

  • POSIFLEX Business Machines LS-1000 - page 3

    Description Function Sca n Window Reads barcodes Object Detector Trigger and wake up scanner automatically wh en pre sen t ed with barcode in its range Bee per Hol e F o r beep tone indication USING THE SCANNER SCANNER INTRODUCTION Features The sca nne r unit is a compact and space-saving hands-free omni- directional laser scanner . It can operate ...

  • POSIFLEX Business Machines LS-1000 - page 4

    Wake up scanner When the scanner enters the sleep mode, pressing this switch can wake the scanner up. The sleep mode feature can be programmed using the menu labels from the Programming Guide. NOTE: The default time -out va lu e i s set t o 10 minutes after laser sl ept, 30 minutes after motor slep t . When the scanner is in sleep mode, the LED in ...

  • POSIFLEX Business Machines LS-1000 - page 5

    SCANNER SETUP (PROGRAMMING) In most of the cases no setup is required. The defaul t setup of the scanner makes the scanner able to detect automatically the most commonly applied bar code types as tabulated above and send the data to the host system as if they are read from an USB or RS232 keyboard . To re ad the d isable d bar cod e types , the pro ...

  • POSIFLEX Business Machines LS-1000 - page 6

    Cover unwanted codes with your hand and pre sent the desired codes, one by one, to the scanner, the scanner beeps once as it accepts each code. When done, again present the <Enter/Exit programming mode > barcode. The scanner beeps twice, once long and once short, and the LED returns to blue. The scanner has been programmed. Of course you may ...

  • POSIFLEX Business Machines LS-1000 - page 7

    SCANNER OPERATION Operating the Scanner The scanner reads barcodes in omni -directional scan mode as regular practice. It can also operate in s ingl e -line mode for a better aiming on a specific barcode that is printed on a surface with more than one barcode printed closely. Single Line Scan Mode In this mode the scanner can emit a single line pat ...

  • POSIFLEX Business Machines LS-1000 - page 8

    Sleep Mode After the scanner has been inactive for a period of time, the laser automatically turns off; then the mot or will turn off and the scanner will enter th e “ S leep Mode ”, the blue status LED keeps bli nk ing as indication. To wake up the scanner, simply present an object close to the scan window, or press the function but ton. Note: ...

  • POSIFLEX Business Machines LS-1000 - page 9

    Beeper Indications A beeper gives audible feedback on scanner operation. Beeps Indication One beep A barcode has been successfully decoded. Four beeps in series This indicates the scanner passed the power on self -test and is operating properly. Two beeps: low-high The scanner has entered programming mode. Two beeps: same tone Scanner has returned ...

  • POSIFLEX Business Machines LS-1000 - page 10

    Pa g e 10 make sure that the scanner is installed as instructed in this manual and that all cables are properly connected. If the problem remains, contact your dealer. Problem Diagnostic Tips The scanner window is dirty. Clean the scanner window as described in the Maintenance section. The presented barcode type is not enabled. Use the Programming ...

  • POSIFLEX Business Machines LS-1000 - page 11

    The software running on the POS system does not support the data format of the barcode label. Enter/Exit Programming Mode Note: Sca n t h is code to enter and exit programming mode. A slightly enlarged image of this code is also printed on the last page of this section for ease of application . PROGRAMMING CODES Al l framed b ar cod e n ames repr e ...

  • POSIFLEX Business Machines LS-1000 - page 12

    RESET Note: The reading of the “ RESET” label turns all the parameters back to default values but leaving the interface mode unchanged. It is suggested to scan also the “Return to USB default” or “Return to RS232 default” lab el a f te r t hi s f o r L S -1 000 sca nn e r s. Return to USB default US Keyboard Re tur n to RS232 de fa ult ...

  • POSIFLEX Business Machines LS-1000 - page 13

    Message Terminator-Enter Message Terminator-H.tab Message terminator-Non e International Keyboard (ALT method) Pa g e 13 ...

  • POSIFLEX Business Machines LS-1000 - page 14

    Return to customer default Note: The reading of the label will recover all parameter back to customer default. Codabar Enable Save as customer default Codabar Disa ble Pa g e 14 ...

  • POSIFLEX Business Machines LS-1000 - page 15

    Full ASCII C OD E 39 Di sab le Code 3 9 Enable Code 39 Disable Full ASCII CODE39 Enable Pa g e 15 ...

  • POSIFLEX Business Machines LS-1000 - page 16

    UPC/EAN/JAN Disable UPC/EAN/JAN Enable ITF 2 OF 5 Disable ITF 2 of 5 Enable Pa g e 16 ...

  • POSIFLEX Business Machines LS-1000 - page 17

    UPC/EAN AD D ON O FF AD D ON 5 only AD D ON 2 only AD D ON 2 or 5 Pa g e 17 ...

  • POSIFLEX Business Machines LS-1000 - page 18

    EAN/UPC + A dd o n (no ne mandatory) Force UPC-A to EAN-13 format enable EAN/UPC + Add on (mandatory) For ce UPC-A t o EA N -13 format disable Pa g e 18 ...

  • POSIFLEX Business Machines LS-1000 - page 19

    E A N-13 Convert to ISBN/ISSN Enable EA N-1 3 C onve rt to ISBN/ISSN Disable E A N-128 Enable E A N -12 8 Disable Pa g e 19 ...

  • POSIFLEX Business Machines LS-1000 - page 20

    Code 128 Enable Code 1 2 8 Disable Code 93 Enable Code 9 3 Disable Pa g e 20 ...

  • POSIFLEX Business Machines LS-1000 - page 21

    Chinese Post Code Enable Chinese Post Code Disable Code 32 (Italian Pharmacy Code) Enable Code 32 (Italian Pharm acy Code) Disable Pa g e 21 ...

  • POSIFLEX Business Machines LS-1000 - page 22

    MSI enable MSI Disable Enter/Exit Programming Mode Pa g e 22 ...

Produzent POSIFLEX Business Machines Kategorie Barcode Reader

Dokumente, die wir vom Produzenten des Geräts POSIFLEX Business Machines LS-1000 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen POSIFLEX Business Machines
- Bedienungsanleitungen LS-1000
- Produktkarten POSIFLEX Business Machines
- Informationsbroschüren
- oder Energieetiketten POSIFLEX Business Machines LS-1000
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung POSIFLEX Business Machines LS-1000.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen POSIFLEX Business Machines LS-1000, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen POSIFLEX Business Machines LS-1000. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts POSIFLEX Business Machines LS-1000 ansehen.

Die komplette Bedienungsanleitung des Geräts POSIFLEX Business Machines LS-1000, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von POSIFLEX Business Machines LS-1000 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von POSIFLEX Business Machines LS-1000 verständlich ist.

Eine gänzliche Bedienungsanleitung von POSIFLEX Business Machines sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von POSIFLEX Business Machines LS-1000 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von POSIFLEX Business Machines LS-1000 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich POSIFLEX Business Machines LS-1000, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts POSIFLEX Business Machines LS-1000 - die uns die ersten Schritte während der Nutzung von POSIFLEX Business Machines LS-1000 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit POSIFLEX Business Machines LS-1000 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von POSIFLEX Business Machines LS-1000 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich POSIFLEX Business Machines LS-1000?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit POSIFLEX Business Machines LS-1000 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit POSIFLEX Business Machines LS-1000 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)