Deutsch dropdown-ico

Bedienungsanleitung Sun Microsystems A3500

44 Seiten 0.68 mb
Download

Zur Seite of 44

Summary
  • Sun Microsystems A3500 - page 1

    901 San Antonio Road Palo Alto, CA 94303-4900 USA 650 960-1300 Fax 650 969-9131 Sun ™ StorEdge ™ A3500 Har dwar e Conf iguration Guide Part No. 805-4981-1 1 September 1998, Revision A Sun Microsystems, Inc. Send comments about this document to: docfeedback@sun.com ...

  • Sun Microsystems A3500 - page 2

    Copyright 1998 Sun Microsystems, Inc., 901 San Antonio Road • Palo Alto, CA 94303 USA. All rights reserved. Portions copyright 1997 Symbios Logic, Inc. All rights reserved. This product or document is protected by copyright and distributed under licenses restricting its use, copying, distribution, and decompilation. No part of this product or doc ...

  • Sun Microsystems A3500 - page 3

    Contents iii Contents Preface v 1. Host Connections 1- 1 1.1 Configuration Guidelines 1-2 1.2 Supported Host Configurations 1-3 1.2.1 Single Host 1-3 1.2.2 Daisy Chain 1-4 1.2.3 Independent Controller 1-5 1.2.4 Multi-Initiator 1-6 1.3 Ultra 2 Host System—Power Connection Requirement 1-7 2. StorEdge A3500 Conf igurations 2-1 2.1 StorEdge D1000 Dis ...

  • Sun Microsystems A3500 - page 4

    iv Sun StorEdge A3500 Hardware Configuration Guide • September 1998 2.3.1 SCSI Cabling 2-14 2.3.2 Power Connections 2-16 2.4 2x7 Cabling 2-17 2.4.1 SCSI Cabling 2-17 2.4.2 Power Connections 2-19 2.5 3x15 Cabling 2-20 2.5.1 SCSI Cabling 2-21 2.5.2 Power Connections 2-25 2.5.3 Connecting to AC Power Source 2-25 2.5.4 Power Connections 2-26 ...

  • Sun Microsystems A3500 - page 5

    v Pr eface Sun StorEdge A3500 Hardware Conf iguration Guide provides conf iguration instructions for the Sun™ StorEdge™ A3500 systems. These instructions are designed for an experienced system administrator . Using UNIX Commands This document does not contain information on basic UNIX ® commands and procedur es such as shutting down the system ...

  • Sun Microsystems A3500 - page 6

    vi Sun StorEdge A3500 Hardware Configuration Guide • September 1998 T ypographic Conventions Shell Pr ompts T ABLE P-1 T ypographic Conventions T ypeface or Symbol Meaning Examples AaBbCc123 The names of commands, files, and directories; on-scr een computer output. Edit your .login file. Use ls -a to list all files. % You have mail . AaBbCc123 Wh ...

  • Sun Microsystems A3500 - page 7

    vii Related Documentation Sun Documentation on the W eb The docs.sun.com sm web site enables you to access Sun technical documentation on the W eb. Y ou can browse the docs.sun.com archive or search for a specif ic book title or subject at: http://docs.sun.com Sun W elcomes Y our Comments W e are interested in improving our documentation and welcom ...

  • Sun Microsystems A3500 - page 8

    viii Sun StorEdge A3500 Hardware Configuration Guide • September 1998 ...

  • Sun Microsystems A3500 - page 9

    1-1 CHAPTER 1 Host Connections This chapter contains configurations for one or two Sun StorEdge A3000 contr oller modules connected to one or more hosts. It also contains information about connecting power to an Ultra™ host system. ■ Configuration Guidelines—page 1-2 ■ Supported Host Configurations—page 1-3 ■ Single Host—page 1-3 ■ ...

  • Sun Microsystems A3500 - page 10

    1-2 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 1.1 Conf iguration Guidelines Use the following guidelines for installing and cabling or reconfiguring your system. ■ Do not exceed a SCSI bus length of 25 meters. ■ Make sure that the last Sun StorEdge A3000 contr oller module in any daisy chain has a total of two terminato ...

  • Sun Microsystems A3500 - page 11

    Chapter 1 Host Connections 1-3 1.2 Supported Host Conf igurations The examples that follow show the cable connections for configurations that are supported by Sun Microsystems™. 1.2.1 Single Host FIGURE 1-1 Single Host Connected to a Sun StorEdge A3000 Controller Module Diff erential SCSI terminators ...

  • Sun Microsystems A3500 - page 12

    1-4 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 1.2.2 Daisy Chain Y ou can daisy chain controller modules in the same or separate cabinets. FIGURE 1-2 T wo Sun StorEdge A3000 Controller Modules Daisy Chained to One Host Note – The SCSI cables between the two controller modules are cr ossed to prevent the SCSI IDs for the co ...

  • Sun Microsystems A3500 - page 13

    Chapter 1 Host Connections 1-5 1.2.3 Independent Contr oller FIGURE 1-3 Independent Controller—One Sun StorEdge A3000 Contr oller Connected to T wo Hosts Diff erential SCSI terminators ...

  • Sun Microsystems A3500 - page 14

    1-6 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 1.2.4 Multi-Initiator FIGURE 1-4 T wo-Node Multi-Initiator Configuration Note – For more detailed information regar ding the two-node multi-initiator configuration, such as setting host SCSI IDs, r efer to the SP ARCcluster™ PDB™ documentation that is shipped with the host ...

  • Sun Microsystems A3500 - page 15

    Chapter 1 Host Connections 1-7 1.3 Ultra 2 Host System—Power Connection Requir ement Y ou can connect a controller module to an Ultra 2 host system; however , you must connect the power cord of the Ultra 2 host to one of the AC power sequencers in the expansion cabinet that contains the controller module. Y ou need to order one of the following p ...

  • Sun Microsystems A3500 - page 16

    1-8 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 1. Gain access to the AC power sequencers. See the documentation that came with the expansion cabinet. 2. Route the power cable from the Ultra 2 host under the expansion cabinet frame on the same side as the power sequencer . 3. Plug the power cord from the Ultra 2 host into the ...

  • Sun Microsystems A3500 - page 17

    2-1 CHAPTER 2 StorEdge A3 5 00 Conf igurations This chapter contains information about setting up the following configurations: ■ One controller module with two StorEdge D1000 disk arrays (1x2) ■ One controller module with f ive StorEdge D1000 disk arrays (1x5) ■ T wo controller modules with seven StorEdge D1000 disk arrays (2x7) ■ Three co ...

  • Sun Microsystems A3500 - page 18

    2-2 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 2.1 StorEdge D1000 Disk Array Settings This section describes how to set the following attributes for StorEdge D1000 disk arrays ( FIGURE 2-1 ) in 1x2, 1x5, 2x7, and 3x15 configurations: ■ Option switch ■ Module ID ■ SCSI jumper cables and terminators FIGURE 2-1 StorEdge D ...

  • Sun Microsystems A3500 - page 19

    Chapter 2 StorEdge A3500 Configurations 2-3 2.1.1 1x2 Conf iguration 2.1.1.1 Option Switch Both disk arrays have split busses. Their option switches should be set as shown in FIGURE 2-2 . FIGURE 2-2 1x2 Option Switch Settings for StorEdge D1000 Disk Array This will cause the disk drives in the StorEdge D1000 disk arrays to be numbered as shown in F ...

  • Sun Microsystems A3500 - page 20

    2-4 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 2.1.1.2 Module ID Switch Ensure that the module IDs for the StorEdge D1000 disk arrays are set according to . Note – Since the top and bottom disk arrays are split between one controller module, the Module IDs will overlap. This may result in error messages while the host syst ...

  • Sun Microsystems A3500 - page 21

    Chapter 2 StorEdge A3500 Configurations 2-5 2.1.2 1x5 Conf iguration 2.1.2.1 Option Switch All StorEdge D1000 disk arrays in this configuration should have their option switches set as shown in FIGURE 2-5 . FIGURE 2-5 1x5 Option Switch Settings for StorEdge D1000 Disk Array This will cause the disk drives in the StorEdge D1000 disk arrays to be num ...

  • Sun Microsystems A3500 - page 22

    2-6 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 2.1.2.2 Module ID Switch Ensure that the module IDs for the StorEdge D1000 disk arrays ar e set according to T ABLE 2-1 . 2.1.2.3 SCSI Jumper Cables and T erminators All disk arrays in this configuration should have SCSI jumper cables between the middle SCSI connectors (IN/OUT - ...

  • Sun Microsystems A3500 - page 23

    Chapter 2 StorEdge A3500 Configurations 2-7 2.1.3 2x7 Conf iguration 2.1.3.1 Option Switch The disk drives in each of the top four disk arrays in FIGURE 2-17 are on a single bus and should be set as described in Section 2.1.2.1 “Option Switch” on page 2-5. The bottom three disk arrays have split busses. Their option switches should be set as sh ...

  • Sun Microsystems A3500 - page 24

    2-8 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 2.1.3.2 Module ID Switch Ensure that the module IDs for the StorEdge D1000 disk arrays ar e set according to T ABLE 2-2 . Facing the front of the expansion cabinet: ■ controller module A controls the right side of disk arrays 1 thr ough 3 and all of disk arrays 4 and 5. ■ co ...

  • Sun Microsystems A3500 - page 25

    Chapter 2 StorEdge A3500 Configurations 2-9 2.1.4 3x15 Conf iguration 2.1.4.1 Option Switch All disk arrays are on a single bus and should be set as described in Section 2.1.2.1 “Option Switch” on page 2-5. 2.1.4.2 Module ID Switch Ensure that the module IDs for the StorEdge D1000 disk arrays ar e set according to T ABLE 2-3 and T ABLE 2-4 . T ...

  • Sun Microsystems A3500 - page 26

    2-10 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 In this configuration: ■ controller module A contr ols disk arrays 1 and 2 in the 2x7 cabinet and disk arrays 1 through 3 in 1x8 cabinet ( FIGURE 2-19 ) ■ controller module B contr ols disk arrays 3 through 7 in 2x7 cabinet ( FIGURE 2-20 ) ■ controller module C contr ols ...

  • Sun Microsystems A3500 - page 27

    Chapter 2 StorEdge A3500 Configurations 2-1 1 2.2 1x2 Cabling The 1x2 can be configur ed with the controller module either on top of or below the two disk arrays. Both configurations are described in this section. 2.2.1 SCSI Cabling 2.2.1.1 Cable Lengths The following table shows the lengths of each SCSI cable connected to the drive connections on ...

  • Sun Microsystems A3500 - page 28

    2-12 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 2.2.1.2 SCSI Connections FIGURE 2-11 One A3000 Controller Module and T wo D1000 Disk Arrays (SCSI) FIGURE 2-12 T wo D1000 Disk Arrays and One A3000 Controller Module (SCSI) Di ff erential SCS I terminator Diff erential SCSI terminator Diff erential SCSI terminator 1 2 Diff eren ...

  • Sun Microsystems A3500 - page 29

    Chapter 2 StorEdge A3500 Configurations 2-1 3 2.2.2 Power Connections Because the controller module must r eceive power after the disk arrays, connect the disk arrays to the first stage of the power sequencer and the controller module to the second. T wo examples are shown below . FIGURE 2-13 One A3000 Controller Module and T wo D1000 Disk Arrays ( ...

  • Sun Microsystems A3500 - page 30

    2-14 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 2.3 1x5 Cabling 2.3.1 SCSI Cabling 2.3.1.1 Cable Lengths The following table shows the lengths of each SCSI cable connected to the drive connections on the controller module. The inboard IN/OUT connectors on each of the disk arrays are connected together using a 0.2m SCSI jumpe ...

  • Sun Microsystems A3500 - page 31

    Chapter 2 StorEdge A3500 Configurations 2-1 5 2.3.1.2 SCSI Connections FIGURE 2-15 One A3000 Controller Module and Five D1000 Disk Arrays (SCSI) SCSI jumper cable Diff erential SCSI terminator 1 2 3 4 5 ...

  • Sun Microsystems A3500 - page 32

    2-16 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 2.3.2 Power Connections FIGURE 2-16 One A3000 Controller Module and Five D1000 Disk Arrays (Power) R1&R2 R3 R6 R4 R5 F ront sequencer R5 R6 L5 L6 L4 L3 L2 L1 R4 R3 R2 L1&L2 L3 L6 L4 L5 Rear sequencer R1 Rear view ...

  • Sun Microsystems A3500 - page 33

    Chapter 2 StorEdge A3500 Configurations 2-1 7 2.4 2x7 Cabling 2.4.1 SCSI Cabling 2.4.1.1 Cable Lengths The following tables show the lengths of each SCSI cable connected to the drive connections on the respective contr oller modules. The inboard IN/OUT connectors on each of the top four disk arrays are connected together using a 0.2m SCSI jumper ca ...

  • Sun Microsystems A3500 - page 34

    2-18 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 2.4.1.2 SCSI Connections FIGURE 2-17 T wo A3000 Controller Modules and Seven D1000 Disk Arrays (SCSI) Controller Module A Controller Module B SCSI jumper cable Diff erential SCSI terminator Diff erential SCSI terminators A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 ...

  • Sun Microsystems A3500 - page 35

    Chapter 2 StorEdge A3500 Configurations 2-1 9 2.4.2 Power Connections FIGURE 2-18 T wo A3000 Controller Modules and Seven D1000 Disk Arrays (Power) R1&R2 R3 R6 R4 R9 R8 R5 R7 F ront sequencer L1&L2 L3 L6 L4 L9 L8 L5 L7 Rear sequencer L1 L2 L3 L6 L7 L8 L9 L4 R1 R2 R5 R6 R7 R8 R9 R3 R4 L5 Rear view ...

  • Sun Microsystems A3500 - page 36

    2-20 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 2.5 3x15 Cabling This section contains information about SCSI and power connections for three StorEdge A3000 controller modules and f ifteen StorEdge D1000 disk arrays in two StorEdge expansion cabinets. Caution – The components in the expansion cabinets are configur ed as a ...

  • Sun Microsystems A3500 - page 37

    Chapter 2 StorEdge A3500 Configurations 2-2 1 2.5.1 SCSI Cabling 2.5.1.1 Cable Lengths The following tables show the lengths of each SCSI cable connected to the drive connections on the respective contr oller modules. The inboard IN/OUT connectors on each of the disk arrays are connected together using a 0.2m SCSI jumper cable, part number 530-1883 ...

  • Sun Microsystems A3500 - page 38

    2-22 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 The outboard IN/OUT -2 connector on each disk array is terminated with a differ ential SCSI terminator , part number 150-1890-xx. 2.5.1.2 SCSI Connections for Controller Module A FIGURE 2-19 3x15 (Controller Module A) 1x8 SCSI jumper cable Diff erential SCSI terminator A2 A1 A3 ...

  • Sun Microsystems A3500 - page 39

    Chapter 2 StorEdge A3500 Configurations 2-2 3 2.5.1.3 SCSI Connections for Controller Module B FIGURE 2-20 3x15 (Controller Module B) 1x8 SCSI jumper cable Diff erential SCSI terminator B1 B2 B3 B4 B5 2x7 ...

  • Sun Microsystems A3500 - page 40

    2-24 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 2.5.1.4 SCSI Connections for Controller Module C FIGURE 2-21 3x15 (Controller Module C) SCSI jumper cable Diff erential SCSI terminator C1 C2 C3 C4 C5 1x8 2x7 ...

  • Sun Microsystems A3500 - page 41

    Chapter 2 StorEdge A3500 Configurations 2-2 5 2.5.2 Power Connections 2.5.2.1 Power Sequencer Interconnections The front and r ear power sequencers in the 2x7 cabinet and the 1x8 cabinet must be interconnected. Make sure an inter connect cable (part number 530-2235-xx) is connected between the OUT on the front sequencer in 2x7 cabinet and the IN on ...

  • Sun Microsystems A3500 - page 42

    2-26 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 FIGURE 2-23 Power Connections to A void (Differ ent Phases) FIGURE 2-24 Power Connections to A void (Same Phase) 2.5.4 Power Connections The power connections for 2x7 cabinet are the same as those in the standard 2x7 expansion cabinet ( FIGURE 2-18 ). 2x7 Phase A 1x8 Phase B 2x ...

  • Sun Microsystems A3500 - page 43

    Chapter 2 StorEdge A3500 Configurations 2-2 7 The power connections for the 1x8 cabinet are shown in FIGURE 2-25 . FIGURE 2-25 One A3000 Controller Modules and Eight D1000 Disk Arrays (Power) R1&R2 R8 R6 R4 R9 R3 R5 R7 F ront sequencer L1&L2 L8 L6 L4 L9 L3 L5 L7 Rear sequencer L1 L2 L3 L6 L7 L8 L9 L4 R1 R2 R3 R6 R7 R8 R9 R4 L5 R5 Rear view ...

  • Sun Microsystems A3500 - page 44

    2-28 Sun StorEdge A3500 Hardware Configuration Guide • September 1998 ...

Produzent Sun Microsystems Kategorie Computer Hardware

Dokumente, die wir vom Produzenten des Geräts Sun Microsystems A3500 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Sun Microsystems
- Bedienungsanleitungen A3500
- Produktkarten Sun Microsystems
- Informationsbroschüren
- oder Energieetiketten Sun Microsystems A3500
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Sun Microsystems A3500.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Sun Microsystems A3500, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Sun Microsystems A3500. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Sun Microsystems A3500 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Sun Microsystems A3500, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Sun Microsystems A3500 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Sun Microsystems A3500 verständlich ist.

Eine gänzliche Bedienungsanleitung von Sun Microsystems sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Sun Microsystems A3500 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Sun Microsystems A3500 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Sun Microsystems A3500, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Sun Microsystems A3500 - die uns die ersten Schritte während der Nutzung von Sun Microsystems A3500 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Sun Microsystems A3500 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Sun Microsystems A3500 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Sun Microsystems A3500?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Sun Microsystems A3500 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Sun Microsystems A3500 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)