Bedienungsanleitung Vermont Casting CF9030

31 Seiten 0.46 mb
Download

Zur Seite of 31

Summary
  • Vermont Casting CF9030 - page 1

    50000993 02/04 Rev .2 En USER’S MANUAL for Gas Barbecue Grill Models CF9030, CF9055/56 & CF9085/86 ...

  • Vermont Casting CF9030 - page 2

    Page i FOR YOUR SAFETY If you smell gas: ¥ Shut off gas to the appliance ¥ Extinguish any open flame ¥ Open lid ¥ If odor continues, immediately call your gas supplier or fire department. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. An LP cylinder not connecte ...

  • Vermont Casting CF9030 - page 3

    SIGNAL WORDS: The Signal Words used in this Manual, and their intended meanings, are as follows : DANGER: Indicates that a failure to observe the safety instructions could result in death or catastrophic bodily injury . W ARNING: Indicates that a failure to observe the safety instructions could result in serious bodily injury. CAUTION: Indicates th ...

  • Vermont Casting CF9030 - page 4

    A. SAFE LOCA TIONS FOR USE OF THIS OUTDOOR GRILL DANGER: • Never use this outdoor Grill inside any building, garage, shed or breezeway , or inside any boat, trailer or recreational vehicle, to prevent a possible fire and to prevent the possibility of carbon monoxide poisoning or asphyxiation. W ARNINGS: • Always confirm that this Grill is not p ...

  • Vermont Casting CF9030 - page 5

    B. SAFE USE OF LP (PROP ANE) GAS DANGER: • Never install a propane cylinder that is more than 80 % full, as the contents may lack adequate room for expansion when exposed to heat. Propane vapor may then be vented through the pressure release valve, which could accumulate in a pool and later result in a fire or explosion. Always instruct your cert ...

  • Vermont Casting CF9030 - page 6

    • Always promptly shut off the gas supply and immediately extinguish all flames if you smell gas. Always seek assistance from your gas supplier or local Fire Department if the gas smell persists, because of the danger of fire or explosion. • Always confirm that there are no gas leaks before lighting this Grill. Apply a 50/50 solution of liquid ...

  • Vermont Casting CF9030 - page 7

    Safety Important W arnings .................................................................. i - v Clearance Requirements ................................................................ ii T able of Contents .......................................................................... 1 Fuels ......................................................... ...

  • Vermont Casting CF9030 - page 8

    FUELS W ARNING: Never use Natural Gas in a Grill that has been configured to burn Propane Gas, and never use Propane Gas in a Grill that has been configured to use Natural Gas, to avoid possible bodily injury. Always consult the Rating Label on the back of your Grill to confirm which fuel must be used with the Grill. W ARNING: Use only the pressure ...

  • Vermont Casting CF9030 - page 9

    DANGER: a) Do not store a spare LP - Gas Cylinder under or near this appliance b) Never fill the cylinder beyond 80% full; and c) If the information in a) and b) is not followed exactly, a fire causing death or serious injury may occur . W ARNING: Always confirm that the openings in the cylinder compartment of the Grill are free of any obstructions ...

  • Vermont Casting CF9030 - page 10

    Hooking Up to the LP (Propane) Gas Supply FOR YOUR SAFETY 1. W ARNING: Never store or use gasoline or any other volatile substance in the vicinity of this Grill. 2. W ARNING: Never store a spare propane cylinder in the vicinity of this Grill, or in the vicinity of any other potential heat source. LP (PROP ANE) GAS SUPPL Y CONNECTION 1. Always place ...

  • Vermont Casting CF9030 - page 11

    Natural Gas Supply Connection TO CONNECT : 1. Push back the Sleeve on the Socket as shown below (see Fig. 6a). 2. Insert Plug and release the Sleeve (see Fig. 6b). 3. Push the Plug until Sleeve snaps forward to lock the Plug in the Socket. • W ARNING: Always conduct the following safety tests before lighting the Grill, to prevent a possible fire ...

  • Vermont Casting CF9030 - page 12

    Control Functions PROP ANE TANK VAL VE W ARNING: Never open the T ank Valve unless the Grill is being prepared for use, to prevent the pooling of propane vapor . Always open the V alve immediately before lighting the Grill, and always close it immediately after cooking has been completed. BURNER CONTROL VAL VES On Model CF9030, three valves indepen ...

  • Vermont Casting CF9030 - page 13

    Lighting the Main Burners 1. Always open the Hood completely and always inspect the Grill and burners to confirm that all components are properly positioned before lighting the main burners. W ARNING: Never stand with your head directly over the Grill when preparing to light the main burners, to prevent possible bodily injury . 2. Always confirm th ...

  • Vermont Casting CF9030 - page 14

    T urning the Burners Off 1. Always turn the burner control knob(s) to the OFF position when cooking has been completed. 2. Promptly turn OFF the gas supply valve at the propane cylinder or at the main natural gas supply line. 3. Close the Hood of the Grill. FLARE-UPS “Flare-ups” sometimes occur when food drippings fall onto the hot sear plates ...

  • Vermont Casting CF9030 - page 15

    Lighting the Rotisserie Burner (Model CF9085/86) The Rotisserie burner provides the steady , even heat required to cook poultry and roasts to self-basted perfection. TO ST ART THE ROTISSERIE BURNER: 1. Always open the Hood completely before attempting to light the Grill. • W ARNING: Never stand with your head directly over the Grill when preparin ...

  • Vermont Casting CF9030 - page 16

    Rotisserie Setup (Optional for Model CF9030 & CF9055/56) The Rotisserie burner is intended to be used for rotisserie cooking only . W ARNING: Never use the main burners while using the Rotisserie burner , as that could result in igniting the drippings, or overheating your Grill. The Rotisserie assembly includes a counterweight for large or irre ...

  • Vermont Casting CF9030 - page 17

    Operation Page 11 Fig. 13 Control knob Igniter Lighting the Side Burner (Optional to all models except CF9055/86) W ARNING: Never stand with your head directly over the Grill when preparing to light the side burner, to prevent possible bodily injury . 1. T urn the side burner control knob to HI (see Fig. 13). 2. T urn the Igniter Knob clockwise unt ...

  • Vermont Casting CF9030 - page 18

    Using the Smoker Box (Model CF9085/86) The CF9085/86 model Grill is equipped with a Rotisserie Burner Smoker Box. You can add a distinct, smoky flavor to your food by burning a variety of woods or herbs in this unit. 1. Always soak any wood chips or herbs that you wish to smoke for a half-hour or more. 2. Always pre-warm the Grill before adding you ...

  • Vermont Casting CF9030 - page 19

    Methods of Cooking With its combination of burners and accessories your gas grill can provide for virtually every conceivable style of cooking. • The powerful Main burners deliver the middle and high range of temperatures desired for traditional barbecuing. This includes searing and finishing steaks, hamburgers, pork chops and the like, or grilli ...

  • Vermont Casting CF9030 - page 20

    One of the keys to extending your range of grilling capabilities is a fundamental understanding of the two common methods of cooking, Direct and Indirect cooking. In the Direct cooking method , food is placed directly above the heat source. This method is used in searing for example where you require high and immediate heat to quickly brown the out ...

  • Vermont Casting CF9030 - page 21

    Grilling T ips: A few helpful hints will ensure that your grilling results are perfect every time. • Apply a light coating of cooking oil to your cooking grids before grilling, to prevent foods from sticking. • Cook similar portion sizes together , so that they all cook evenly . • Use tongs to turn foods on the Grill. • Never pierce foods w ...

  • Vermont Casting CF9030 - page 22

    T ype of Food Beef Burgers Roasts Blade, Sirloin T ip Steaks Porterhouse, Rib, Ribeye, Sirloin, T -Bone Filet Mignon Poultry Chicken, Parts Chicken, Whole Chicken Breasts, Boneless Cornish Hens Duck T urkey W eight/ Thickness 1 inch 1 inch 2 inches 3–4 lb. 1–2 lb. 1–1 1 / 2 lb. 4–5 lb. 13–25 lb. Cooking T ime Rare: 4–7 min. Medium: 7– ...

  • Vermont Casting CF9030 - page 23

    Cooking T emperature 400–450 ° F. 400–450 ° F. 325–350 ° F. 325–350 ° F. 325–350 ° F. 325–350 ° F. 375–400 ° F. 325–350 ° F. 400–450 ° F. 325–350 ° F. 325–350 ° F. T ype of Food Pork Chops Ham Steak Whole ham Ribs Back, Side Roasts Butt, Loin, Shoulder T enderloin Sausage Lamb Chops Loin, Rib, Shoulder Roast Crown R ...

  • Vermont Casting CF9030 - page 24

    Cooking T emperature 325–350 ° F. 325–350 ° F. 325–350 ° F. 325–350 ° F. 325–350 ° F. 325–350 ° F. 325–350 ° F. 400–450 ° F. 325–350 ° F. 325–350 ° F. 325–350 ° F. 325–350 ° F. T ype of Food V egetables Asparagus Beans Carrots Corn on the Cob Eggplant Mushrooms Onions Peppers Potatoes Roasted Garlic T omatoes Zuc ...

  • Vermont Casting CF9030 - page 25

    Care & Cleaning W ARNING : Always observe the following safety precautions, to prevent bodily injury and to assure that your Grill will operate properly : CAUTION : Always allow sufficient time for the Grill to cool fully before handling or cleaning any of its parts. BURNERS: NOTE: All of the burners should be inspected frequently and cleaned a ...

  • Vermont Casting CF9030 - page 26

    • Cooking Grids The cooking grids have been porcelain enameled for durability and ease of cleaning. These Grills may be cleaned with any nonabrasive cleaning agent formulated for kitchen use, or a brass wire brush. NOTE: Always handle the grids with care, as porcelain enamel is susceptible to chipping. • Rotisserie Burner (Model CF9085/86) Insp ...

  • Vermont Casting CF9030 - page 27

    DRIP TRA Y The drip tray and grease cup, located under the burner pan in the bottom of the Grill body are provided to catch excess cooking fats and juices. The drip tray is accessible from the rear of the Grill. It is necessary to lift up the pan slightly while pulling it out (see Fig. 20). Check it for accumulations in the grease cup after each us ...

  • Vermont Casting CF9030 - page 28

    Maintenance BURNER ADJUSTMENT NOTE: It may be necessary to adjust the burners periodically , to compensate for variables in gas characteristics. If you notice that the burner flame pattern is irregular (see Figs. 9a, 9b & 9c), it may be necessary to adjust the air shutter opening at the front of the venturi tubes. • The shutters are accessibl ...

  • Vermont Casting CF9030 - page 29

    Unit won’t stay lit Wind Running out of fuel PROBLEM POTENTIAL CAUSE ACTION REQUIRED Burner will not light Gas supply turned off Out of propane Blockage in the gas system Misalignment of the gas valve to the venturi tubes of the burner . Improper attachment of the propane hose and regulator Control knob left open at startup, or turning gas on too ...

  • Vermont Casting CF9030 - page 30

    PROBLEM POTENTIAL CAUSE ACTION REQUIRED Blockage in the burner or gas system Corroded burner Improper air shutter opening Excessively fatty foods Grease buildup Uneven burn pattern or Flashback fire Excessive yellow flame Flare-up Electrode fouled Electrode improperly gapped Electrode cracked Lead wire is disconnected Lead wire is cracked Battery d ...

  • Vermont Casting CF9030 - page 31

    ◆ Lifetime W arranty • On all exterior Stainless Steel Components, such as the cart paneling & doors, shelving, condiment bins and handles, if so equipped. • On all castings (1 year on paint). ◆ 10 Y ear Warranty • On all porcelain on steel surfaces such as the hood and burn chamber . ◆ 5 Y ear W arranty • On all remaining parts. ...

Produzent Vermont Casting Kategorie Gas Grill

Dokumente, die wir vom Produzenten des Geräts Vermont Casting CF9030 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Vermont Casting
- Bedienungsanleitungen CF9030
- Produktkarten Vermont Casting
- Informationsbroschüren
- oder Energieetiketten Vermont Casting CF9030
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Vermont Casting CF9030.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Vermont Casting CF9030, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Vermont Casting CF9030. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Vermont Casting CF9030 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Vermont Casting CF9030, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Vermont Casting CF9030 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Vermont Casting CF9030 verständlich ist.

Eine gänzliche Bedienungsanleitung von Vermont Casting sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Vermont Casting CF9030 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Vermont Casting CF9030 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Vermont Casting CF9030, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Vermont Casting CF9030 - die uns die ersten Schritte während der Nutzung von Vermont Casting CF9030 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Vermont Casting CF9030 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Vermont Casting CF9030 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Vermont Casting CF9030?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Vermont Casting CF9030 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Vermont Casting CF9030 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)