Deutsch dropdown-ico

Bedienungsanleitung Technika LCD40-920

35 Seiten 4.76 mb
Download

Zur Seite of 35

Summary
  • Technika LCD40-920 - page 1

    COLOUR TELEVISION WITH REMOTE CONTROL OPERA TING INSTRUCTIONS For assistance, please call our T esco Electrical Helpline on 0845 4566767 LCD40-920 ...

  • Technika LCD40-920 - page 2

    English - 1 - Contents Features ................................................................. 2 Accessories ............................................................ 2 Introduction ............................................................. 2 Preparation ............................................................. 2 Safety Precautions ... ...

  • Technika LCD40-920 - page 3

    English - 2 - Features • Remote controlled colour LCD TV . • Fully integrated digital TV (DVB-T). • HDMI connectors for digital video and audio. This connection is also designed to accept high de fi nition signals. • 200 programmes from VHF , UHF(analogue). • 300 programmes for digital mode (IDTV). • OSD menu system. • T wo scart soc ...

  • Technika LCD40-920 - page 4

    English - 3 - Safety Precautions Please read the following recommended safety precautions carefully for your safety . Power Source The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience. Power Cord Do not place the set, a piece of furniture, etc. on the power cor ...

  • Technika LCD40-920 - page 5

    English - 4 - Headphone V olume Excessive sound pressure from earphones and headphones can cause hearing loss. Installation T o prevent injury , this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available). LCD Screen The LCD panel is a very high technology ...

  • Technika LCD40-920 - page 6

    English - 5 - Overview of the Remote Control SUBTITLE SLEEP F I NO / PE S T RE R ETU RN V P 1 4 7 2 5 8 3 6 9 JKL STU DEF MNO VWX PQR YZ M OK GHI S O U R C E ABC EPG 0 SCREEN LANG FAV TV DTV S AP W Standby 1. Y ellow / Feature menu / Current language 2. (*) (in DTV mode) Blue / Install menu / Favourite mode (*) (in 3. DTV mode) PIP / P AP mode 4. G ...

  • Technika LCD40-920 - page 7

    English - 6 - LCD TV and Operating Buttons Standby button 1. TV/A V button 2. Programme Up/Down buttons 3. V olume Up/Down buttons 4. Note: Press “ ” / “ ” buttons at the same time to view main menu. Viewing the Connections- Back Connectors 12 1. S/PDIF Digital Out outputs digital audio signals of the currently watched source. Use a digital ...

  • Technika LCD40-920 - page 8

    English - 7 - 5. SCART 1 inputs or outputs for external devices. Connect the SCART cable between SCART sockets on TV and SCART socket on your external device (such as a decoder , a VCR or a DVD player). Note : If an external device is connected via the SCART sockets, the TV will automatically switch to A V mode. If both sockets are employed at the ...

  • Technika LCD40-920 - page 9

    English - 8 - Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to 1. view all the channels that you subscribe to. For more information, see “Conditional Access” section. Headphone jack is used for connecting an external headphone to 2. the system. Connect to the HEADPHONE jack to listen to ...

  • Technika LCD40-920 - page 10

    English - 9 - Power Connection IMPORT ANT : The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. • Plug the power cable to the mains socket outlet. Connecting the LCD TV to a PC For displaying your computer ’s screen image on ...

  • Technika LCD40-920 - page 11

    English - 10 - Using Other Connectors Y ou can connect a range of optional equipment to your LCD TV . Possible connections are shown below . Note that cables shown in the illustration are not supplied. • T o connect external speakers, use an audio cable. Do not reverse the AUDIO LEFT and AUDIO RIGHT jacks. T urn on the LCD TV and external speaker ...

  • Technika LCD40-920 - page 12

    English - 1 1 - Input Selection Once you have connected external systems to your TV , you can switch to different input sources. • Press “ SOURCE ” button on your remote control for directly changing sources. or , • Select “ Source ” option from the main menu by using “ ” or “ ” button. Use then “ ” or “ ” button to high ...

  • Technika LCD40-920 - page 13

    English - 12 - If an active antenna is connected to your TV , you can select this option as On. Antenna power should be “Off” when standard antenna is used instead of the active antenna. See Con fi guration Menu in the following sections for more information. Press OK button on the remote control to continue and the following message will be d ...

  • Technika LCD40-920 - page 14

    English - 13 - • Press EPG button to view the EPG menu. • Electronic Programme Guide appears on the screen. It is able to get Information of the channel - programs weekly by means of 7-DA Y -EPG. All programs of channels are displayed. On the bottom of the screen; info bar , showing all the available commands, will be displayed. RED button (Shr ...

  • Technika LCD40-920 - page 15

    English - 14 - IDTV Menu System The IDTV menu can only be viewed when watching digital terrestrial broadcasting. Press the “ ” button to turn IDTV on while the TV is in analogue mode. Press the “ M ” button. The menu below appears on the screen: Channel List Using the “ ” or “ ” button on the remote control, make sure that the first ...

  • Technika LCD40-920 - page 16

    English - 15 - Renaming Channels T o rename a speci fi c channel, the channel must be highlighted by pressing “ ” or “ ” button. Then highlight the Edit Name item by pressing “ ” or “ ” button as illustrated below . Press the OK button to activate the rename feature. Now pressing “ ” or “ ” button moves to the previous/ nex ...

  • Technika LCD40-920 - page 17

    English - 16 - on the remote control. Then “Add Timer” window appears. Channel : “ ” or “ ” keys will navigate the user through the TV or Radio list. Date : Starting date is entered via the Left/Right or the numeric buttons. Start : Starting time is entered via the Left/Right or the numeric buttons. End : Ending time is entered via the ...

  • Technika LCD40-920 - page 18

    English - 17 - Dolby D Digital (* for EU countries only) (optional) In the Con fi guration Menu, highlight the Dolby D item by pressing “ ” or “ ” buttons. Use the “ ” or “ ” buttons to set the Dolby D Digital as On or Off. If the channel that you are watching supports Dolby Digital,you can turn this setting on. Hard of Hearing (* ...

  • Technika LCD40-920 - page 19

    English - 18 - Parental Control Use “ ” or “ ” buttons to go to Parental Lock option. Press OK button to enter the menu. A dialog box asking for the lock key will be displayed. The key is set to “0000” initially . Enter PIN. If it is incorrect, “Wrong Pin” OSD will be displayed. If it is correct, the Parental Control menu will be di ...

  • Technika LCD40-920 - page 20

    English - 19 - Menu : shows the language of the system Preferred These settings will be used if available. Otherwise the current settings will be used. • Audio : by pressing “ ” or “ ” keys change the audio language. • Subtitle : alter the subtitle language with “ ” or “ ” keys. The chosen language will be seen in subtitles. Mov ...

  • Technika LCD40-920 - page 21

    English - 20 - Select your Country , Language and T ext language by using “ ” or “ ” and “ ” or “ ” buttons. Press OK or RED button to continue. T o cancel, press BLUE button. The following menu will be displayed during the automatic tuning: After APS is fi nalized, the programme table will appear on the screen. In the programme ta ...

  • Technika LCD40-920 - page 22

    English - 21 - Analogue TV Menu System Picture Menu Mode For your viewing requirements, you can set the related mode option. Press “ ” or “ ” button to select Mode . Press “ ” or “ ” button to choose from one of these options: Cinema , Dynamic and Natural . Brightness/Contrast/Colour/Sharpness/ Hue Press “ ” or “ ” button to ...

  • Technika LCD40-920 - page 23

    English - 22 - V olume Press “ ” or “ ” button to select V olume . Press “ ” or “ ” button to change the level of the V olume. Equalizer Press “ ” or “ ” button to select Equalizer . Press “ ” button to view equalizer menu. Press “ ” or “ ” button to change the preset. In equalizer menu, the preset can be changed ...

  • Technika LCD40-920 - page 24

    English - 23 - Using “ ” or “ ” button, you can switch to PIP , P AP mode or turn off the feature. If the TV is switched to PIP or P AP mode, Pip-Pap submenu will change accordingly and the following settings will appear on the same menu screen. Note that if you switch to P AP mode by using Pip-Pap setting, only Source and Swap options will ...

  • Technika LCD40-920 - page 25

    English - 24 - Press “ ” or “ ” button to select Menu Timeout . Use “ ” or “ ” button to change menu timeout to 15 sec , 30 sec or 60 sec . T eletext Language Press “ ” or “ ” button to select T eletext Language . Use “ ” or “ ” button to change T eletext Language to West, East , T urk/Gre , Cyrillic, Arabic or Persi ...

  • Technika LCD40-920 - page 26

    English - 25 - Store Press “ ” or “ ” button to select Store Program . Press “ ” or OK button to store the settings. “ Stored... ” will be displayed on the screen. Program T able Select Program T able by pressing “ ” or “ ” button. By moving the cursor in four directions you can reach 20 programmes in the same page. Y ou can ...

  • Technika LCD40-920 - page 27

    English - 26 - Source Menu Press “ ” or “ ” button and select the sixth icon. Then press “ ” or OK button. Source menu appears on the screen: In source menu, highlight a source by pressing “ ” or “ ” button and switch to that mode by pressing “ ” button. Source options are; TV , DTV , EXT -1 , EXT -2 , FAV , HDMI-1 , HDMI-2 ...

  • Technika LCD40-920 - page 28

    English - 27 - Displaying TV Information Programme Number , Programme Name , Sound Indicator and Zoom Mode information is displayed on the screen when a new programme is entered or “ INFO/ ” button is pressed. Mute Function Press “ ” button to disable sound. Mute indicator will be displayed in the upper side of the screen. T o cancel mute, ...

  • Technika LCD40-920 - page 29

    English - 28 - 14:9 This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. Cinema This zooms up the wide picture (16:9 aspect ratio) to the full screen. Subtitle This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. Zoom This option zooms to the picture. Note: Y ou can shift t ...

  • Technika LCD40-920 - page 30

    English - 29 - Tips Screen Care Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety , unplug the mains plug when cleaning the set. When moving the TV , hold it properly from the bottom part. Image Persistence Please note that ghosting may occur while ...

  • Technika LCD40-920 - page 31

    English - 30 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1920 x 1200 . The following table is an illustration of some of the typical video display modes. Y our TV may not support different resolutions. Supported resolution modes are listed below . If you switch your PC to an unsupported mode, a warning OSD ...

  • Technika LCD40-920 - page 32

    English - 31 - Appendix C: Supported DVI Resolutions When connecting devices to your TV’ s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 60Hz 480i ; 480p ; 576i ; 576p ; 720p ;; 1080i ;; 1080p ;;;; ; Appendix D: PIP/P AP Mode Combinations MAIN TV DTV Scart1 Scar ...

  • Technika LCD40-920 - page 33

    English - 32 - Speci fi cations TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND Digital Reception MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Pro fi le 1 for UK Object carousel support compliant with ISO/IEC 135818-6 and UK DTT pro fi le Frequency range: 474-850 MHz for ...

  • Technika LCD40-920 - page 34

    English - 33 - Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply . MAINS (AC) OPERA TION The wires in the mains lead are coloured in accordance with the following code : IMPORT ANT As the colours of the wires in the mains lead of this appliance may not correspon ...

  • Technika LCD40-920 - page 35

    5016471 0 ...

Produzent Technika Kategorie Flat Panel Television

Dokumente, die wir vom Produzenten des Geräts Technika LCD40-920 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Technika
- Bedienungsanleitungen LCD40-920
- Produktkarten Technika
- Informationsbroschüren
- oder Energieetiketten Technika LCD40-920
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Technika LCD40-920.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Technika LCD40-920, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Technika LCD40-920. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Technika LCD40-920 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Technika LCD40-920, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Technika LCD40-920 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Technika LCD40-920 verständlich ist.

Eine gänzliche Bedienungsanleitung von Technika sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Technika LCD40-920 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Technika LCD40-920 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Technika LCD40-920, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Technika LCD40-920 - die uns die ersten Schritte während der Nutzung von Technika LCD40-920 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Technika LCD40-920 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Technika LCD40-920 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Technika LCD40-920?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Technika LCD40-920 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Technika LCD40-920 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)