-
AEG L 96485 FL - page 1
L 98685 F L L 96485 F L EN WASHING MACHINE USER MANUAL ...
-
AEG L 96485 FL - page 2
FOR PERFECT RESULTS Thank you for choosing th is AEG product. We have created it to give you impe ccable performance for many years, with innovative techno logies that help make life simpler – features you mi ght not find on ordinary appliances. Please spend a fe w minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the A ...
-
AEG L 96485 FL - page 3
CONTENTS 4 Safety information 6 Environment concerns 7 Product description 8 Accessories 8 Control panel 13 Washing programmes 16 BEFORE FIRST USE 17 Using the appliance 18 Activating the appliance and setting a programme 18 Loading the laundry 19 Using the detergent and additives 21 Starting a programme 22 At the end of programme 22 Helpful hints ...
-
AEG L 96485 FL - page 4
SAFETY INFORMATIO N Before the installation and use, read this manual carefully: • For your safety and the safety of your property • To he lp the e nviron ment • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or give it to a different person. The manufacturer is not responsible i ...
-
AEG L 96485 FL - page 5
• Do not touch the glass of the door while a programme operates. The glass can be hot (only for front-loading appliances). Care and clean ing • Deactivate the appliance and disconnect the mains plug from the mains socket. • Do not use the appliance without the filters. Make sure that the installation of the filters is correct. An incorrect in ...
-
AEG L 96485 FL - page 6
• Do not use multiple plugs and extension cables. There is a risk of fire. • Do not replace or change the mains cable. Contact the service centre. • Make sure not to cause damage to the mains plug and cable. • Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug aft ...
-
AEG L 96485 FL - page 7
PRODUCT DESCRIPTION 1 2 3 9 10 6 5 7 8 4 11 12 13 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Internal lamp 6 Rating plate 7 Drain pump 8 Feet for the appliance level 9 Water drain hose 10 Water inlet hose 11 Mains c able 12 Transit bolts 13 Feet for the appliance level Product description 7 ...
-
AEG L 96485 FL - page 8
ACCESSORIES 1 2 3 4 1 Spanner To remove the transit bolts. 2 Plast ic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts. 3 Anti-flood inlet hose To prevent possible leakage 4 Plast ic hose guide To connect the drain hose on the edge of a sink. CONTROL PANEL W olle/Seide Koch/Bunt Extra Leise Pflegeleicht ...
-
AEG L 96485 FL - page 9
TOUCH SCREEN Do not wear gloves when you touch the buttons. Make sure the touch screen and buttons are always clean and dry. AUTO OFF button 1 Press this button to activate or deactivate the appliance. A tune sounds when the appliance is activated. The AUTO OFF function automatically deactivates the appliance to decrease energy con - sumpt ion wh e ...
-
AEG L 96485 FL - page 10
D • The time of the day When you activate the appliance the display shows the time of the day for some seconds. To adjust the clock, refer to "Clock setting". • The programme duration When the washing programme starts, the programme time de creases every minute. Programme duration symbol The symbol comes on when the digits shows the p ...
-
AEG L 96485 FL - page 11
H Stains Prewash Soak The indicator bar fills accord ingly to the set functions. I The default spin speed of the program me. _ _ _ No sp in 1) Rinse hold 1) Only available for Spin/Drain programme. J The default temperature of the programme. Cold wash DAMPF BUTTON 4 Touch button 4 to set the steam level. This is possible only with programmes where ...
-
AEG L 96485 FL - page 12
You can select: SHORTENED DURATION To wash items with daily soil. EXTRA QUICK To wash quickly items with almost no soil. Some programmes accept only one of these functions. EXTRA SPÜLEN BUTTON 9 Touch button 9 to add rinsing phases to a programme. Use this function for persons allergic to detergents and in areas w here the water is soft. FLECKEN, ...
-
AEG L 96485 FL - page 13
• You touch the buttons. • The programme is completed. • The appliance has a malfunction. To deactivate/activate the acoustic signals, touch button 10 and button 9 at the same time for 6 seconds. If you deactivate the acoustic signals, they continue operate only when you touch the but - tons and when a malfunction occurs. Child lock function ...
-
AEG L 96485 FL - page 14
Programme Temperature Type of load Weight of load Programme de - scription Functions Pflegeleicht 60° - Cold Rinses Short sp in Synthetic or mixed fabric items with normal soil. Maxi mum load 4 kg Wash Rinses Short spin SPIN REDUCTION SPÜLSTOPP FLECKE N 1) VORWÄSCHE 2) EINWEICHEN EXTRA SPÜLEN ZEIT SPAREN 3) Leichtbügeln 60° - Cold Synthetic f ...
-
AEG L 96485 FL - page 15
Programme Temperature Type of load Weight of load Programme de - scription Functions Spülen 0° All fabrics Maxi mum load 8 kg Rinse with addi - tives Spin phase SPIN REDUCTION SPÜLSTOPP EXTRA SPÜLEN 7) Jeans 60° - Cold Items like pants, shirts or jackets in Jeans and al so jersey realized with hi-tech materials. Maxi mum load 8 kg Wash Rinses ...
-
AEG L 96485 FL - page 16
Dampf Auffrischen 2) This cycle removes odour from the laundry. Steam does not remove animal odours. Cotton and synthetic items. Do not set the Steam programm e for this type of clothes: • Clothes which is not specified on the care label as being suitable f or tumble-drying. • Clothes with inclusion of plastic, metal, wooden parts or alike. up ...
-
AEG L 96485 FL - page 17
2. Put a small quantity of detergent in the main wash compartment of the detergent dis - penser. Set and start a programme for cotton at the highest temperature without laun - dry. This removes all possible dirt from the drum and the tub. Language setting The first time you activate the appliance, the display shows the default language and tells yo ...
-
AEG L 96485 FL - page 18
ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME For a correct operation of the weight sensor, ac tivate the appliance and set the programme BEFORE you put the laundry in the drum. 1. Press button 1 to activate the appliance. 2. Turn the programme knob ( 2 ) to the necessary programme or touch one o f the but - tons 5 to set a memorised programme. ...
-
AEG L 96485 FL - page 19
Make sure not to have the laundry out of the drum between the seal and the door. There is the risk of water leakage or damage laundr y. USING THE DETERGENT AND ADDITIVES The detergent compartment for the prewash phase and the soak programme. Add the detergent for prewash and soak before t he start of the programme. The detergent compartment for the ...
-
AEG L 96485 FL - page 20
Check the position of the flap 1. Pull out the detergent dispenser until it stops. 2. Press the lever down to remove the dis - pense r. 3. To use powder detergent, turn the flap up. 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: – Do not use gelatinous or thick liquid de - tergents. – Do not put more liquid ...
-
AEG L 96485 FL - page 21
You c annot se t the del ay start w ith the Steam programme. STARTING A PROGRAMME 1. Touch button 6 to start the programme. The indicator of button 6 stops to flash and is on with red colour. If a delayed start is set, the appliance starts the countdown. The appliance adjust automatically t he cycle time to the laundry you have put in the drum t o ...
-
AEG L 96485 FL - page 22
If you deactivate the appliance, it is necessary to set the programme again. AT THE END OF PROGRAMME 1. The appliance stops automatically. 2. The acoustic signals operate, if it is active. 3. In the display goes on and the message tells you that the programme is completed. 4. The indicator of button 6 goes off. 5. The door lock symbol goes off. 6. ...
-
AEG L 96485 FL - page 23
• Turn inside out multilayered fabrics, wool and items with painted illustrations. • Remove hard stains. • Wash with a special detergent heavy soil stains. • Be careful with the curtains. Remove the hooks or put the curtains in a washing bag or pillowcase. • Do not wash in the appliance : – Laundry without hems or with cuts – Underwir ...
-
AEG L 96485 FL - page 24
Water hardness table Level Type Water hardness °dH °T.H. mmol/l Clarke 1 soft 0-7 0-15 0-1.5 0-9 2 medium 8-14 16-25 1.6-2.5 10-16 3 hard 15-21 26-37 2.6-3.7 17-25 4 very ha rd > 21 > 37 >3.7 >25 CARE AND CLEANING WARNING! Disconnect the appliance from the mains supply before you clean it. Descaling The water we use contains limescale ...
-
AEG L 96485 FL - page 25
Door seal Regularly examine the seal and remove all objects from the inner part. Drum Regularly examine the drum to prevent limescale and rust particles. Only use special products to remove rust particles from the drum. To do this: • Clean the drum with special product for stainless steel. • Start a short programme for cotton at the maximum tem ...
-
AEG L 96485 FL - page 26
5. Clean the dispenser recess with a brush. 6. Put back the dispenser in the recess. Drain pump Regularly examine the drain pump and make sure that it is clean. Clean the pump if: • The appliance does not drain the water. • The drum cannot turn. • The appliance makes an unusual noise because of the blockage of the drain pump. • The display ...
-
AEG L 96485 FL - page 27
1 2 5. When the container is full of water, put the drainage duct back again and emp - ty the container. Do steps 4 and 5 agai n and again until no more water flows out from the drain pump. 6. Pull back the drainage duct and turn the filter to remove it. 7. Remove fluff and objects from the pump. 8. Make sure that the impeller of the pump can turn. ...
-
AEG L 96485 FL - page 28
To clean the water inlet filters: 1. Close the water tap. 2. Remove the water inlet hose from the water tap. 3. Clean the filter in the inlet hose with a stiff brush. 4. Remove the inlet hose behind the ap - pliance. 5. Clean the filter in the valve with a stiff brush or a towel. 45° 35° 6. Install again the inlet hose. Make sure that the couplin ...
-
AEG L 96485 FL - page 29
WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. TROUBLE SHOOTER AND SERVICE The start of the appliance does not occur or it stops during operation. Try to find a solution to the problem before you contact the servi ce centre (r ...
-
AEG L 96485 FL - page 30
PROBLEM WITHOUT ALARM MESSAGE Problem Possible cause Possible solution The appliance does not drain the water. A washing programme with - out the drain phase is set. Set the drain programme. The function Rinse Hold is on. Set the drain programme. The spin phase does not operate. The spin phase is off. Set the spin programme. The filter of the drain ...
-
AEG L 96485 FL - page 31
Problem Possible cause Possible solution You did not remove the stub - born stains before you wash the laundry. Use special produ cts to remove the stubborn stains. You set a not correct tempera - ture. Make sure that you set the correct tem - perature. Too much laundry load. Decrease the laundry load. The internal lamp is off. The lamp is burned. ...
-
AEG L 96485 FL - page 32
Product number (PNC) .................. Serial number (S.N.) .................. TECHNICAL DATA Dimensions Width / Height / Depth 600 / 850 / 600 mm Total depth 640 mm Electrical connection: Voltage Overall power Fuse Frequency 230 V 2200 W 10 A 50 Hz Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Water supply 1) Cold water ...
-
AEG L 96485 FL - page 33
2. Remove the cardboard top. 3. Remove the polystyrene packaging ma - terials. 4. Remove the internal film. 5. Open the door. Remove the polystyrene piece from the door seal and all the items from the drum. 6. Put the front piece on the floor behind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to damage th ...
-
AEG L 96485 FL - page 34
1 2 7. Remove the polystyrene protection from the bottom. 8. Pull up the appliance in vertical posi - tion. 9. Remove the power supply cable and the drain hose from the hose holders. 10. Remove the three b olts. Use the key supplied with the appliance. 11. Pull out the plastic spacers. 34 Installation ...
-
AEG L 96485 FL - page 35
12. Replace the plastic spacers with the plastic caps. You can find these caps in the user manual bag. WARNING! Remove all the packaging and the transit bolts before you install the appliance. We recommend that you keep the packaging and the transit bolts for when you move the appliance. Positioning and levelling x4 • Install the appliance on a f ...
-
AEG L 96485 FL - page 36
CAUTION! Do not put cardboard, wood or equivalent materials b elow the appliance feet to adjust the level . The inlet hose 35 O 35 O 35 O 45 O 45 O 45 O • Connect the hose to the appliance. Turn the inlet hose only left or right. Loose the ring nut to set it in the correct position. • Connect the water inlet hose to the cold water tap with 3/4 ...
-
AEG L 96485 FL - page 37
Water drainage There are different procedures to connect the drain hose: With the pla stic hose guide. • On the edge of a sink. • Make sure that the plastic guide cannot move when the appliance drains. Attach the guide to the water tap or the wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into a drain pipe at a he ...
-
AEG L 96485 FL - page 38
• Directly to a built-in drain pipe in the room wall and tighten it with a clip. You can extend the drain hose to maximum 400 mm. Contact the serv ice centre for the other drain hose and the extension. 38 ...
-
AEG L 96485 FL - page 39
39 ...
-
AEG L 96485 FL - page 40
www.aeg-electrolux.com/shop 132940550-A-4820 10 ...
Haben Sie eine Frage bezüglich AEG L 96485 FL?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit AEG L 96485 FL nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit AEG L 96485 FL hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.