Bedienungsanleitung Pelco 100 Series

16 Seiten 0.18 mb
Download

Zur Seite of 16

Summary
  • Pelco 100 Series - page 1

    100 Series Camclosure ® Integrated Camera System W ith LowLight ™ DSS T echnology C2460M-A (7/03) ® INST ALLA TION/OPERA TION ...

  • Pelco 100 Series - page 2

    2 C2460M-A (7/03) LIST OF ILLUSTRA TIONS Figure Page 1 Installation Directly to a Wall/Ceiling ....................................................................................... ... 5 2 Installation Directly to a Concrete Wall/Ceiling ........................................................................... 6 3 Installation on a 4S Electrica ...

  • Pelco 100 Series - page 3

    C2460M-A (7/03) 3 Heater elements could be hot! When camera power is on, use caution when adjusting the camera. CAUTION IMPORT ANT SAFEGUARDS AND WARNINGS 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes. 2. Unless the unit is specifically marked as a NEMA T ype 3, 3R, 3S, 4, 4X, 6, or ...

  • Pelco 100 Series - page 4

    4 C2460M-A (7/03) WELCOME Thank you for purchasing Pelco’ s Camclosure ® integrated camera system with LowLight ™ , DSS (digital slow shutter) technology . Y our new ICS100 Series surface mount dome system includes a high-resolution, low light, color camera with auto iris and varifocal lens. The LowLight color camera has extended DSS settings ...

  • Pelco 100 Series - page 5

    C2460M-A (7/03) 5 INST ALL THE BACK BOX REMOVE THE LOWER DOME Loosen the tamper -resistant screws with the supplied 1/8-inch hollow screwdriver bit. Remove the lower dome and place it to the side. INST ALL THE BACK BOX The installation methods for the ICS100 back box include the following: • Attach Directly to a Wall/Ceiling • Attach Directly t ...

  • Pelco 100 Series - page 6

    6 C2460M-A (7/03) Figure 3. Installation on a 4S Electrical Box 8-32 X .750 FLAT HEAD SCREW (SUPPLIED) 8-32 X .375 PAN HEAD SCREW (SUPPLIED) WALL OR CEILING ADAPTER PLATE BASE 4S ELECTRICAL BOX Attach Directly to Concrete Wall/Ceiling Refer to Figure 2 for the following steps. 1. Attach the base to the wall or ceiling (hardware not supplied). 2. Do ...

  • Pelco 100 Series - page 7

    C2460M-A (7/03) 7 Mount to a Plaster Ring Refer to Figure 4 for the following steps. Installation instructions assume that the 4S electrical box and plaster ring were previously installed. 1. Pull video and power wires into the base. 2. Attach the base to the plaster ring. - Use the two 8-32 x .750-inch pan head screws to attach the base to a 401 p ...

  • Pelco 100 Series - page 8

    8 C2460M-A (7/03) Figure 5. Terminal Block for Input Power CONNECT POWER WIRES Depending on the input voltage, connect either the 12 VDC or 24 V AC input power wires to the terminal block inside the base. Refer to Figure 5 for the location of the terminal block. DC Operation – Refer to the enlarged portion of Figure 5 for the 12 VDC (+) and groun ...

  • Pelco 100 Series - page 9

    C2460M-A (7/03) 9 INST ALL THE CAMERA MODULE CHECK HEA TER JUMPER The Camclosure is equipped with a heater to defrost the dome. Some installations may not require this heater . If the unit will never be subjected to a frost temperature, you can disable the heater , saving power requirements. T o disable the heater , remove the jumper cover from the ...

  • Pelco 100 Series - page 10

    10 C2460M-A (7/03) W all Mounting – The camera bracket tab points out of the enclosure and the top of the camera points up towards the tab. Ceiling Mounting – The camera bracket tab points out of the enclosure and the top of the camera is pointed in the opposite direction. CAMERA BRACKET T AB AL WA YS POINTS OUT OF THE ENCLOSURE TOP OF CAMERA C ...

  • Pelco 100 Series - page 11

    C2460M-A (7/03) 11 Figure 7. Default Switch Settings and Location of Camera Adjustments ZOOM/FOCUS 1. Select a field of view by turning the zoom adjustment ring. Refer to Figure 7. 2. T ighten the zoom locking screw . 3. Adjust the focus by moving the focus locking screw clockwise/counterclockwise. 4. T ighten the focus locking screw . DIGIT AL SLO ...

  • Pelco 100 Series - page 12

    12 C2460M-A (7/03) AGC (AUTOMA TIC GAIN CONTROL) AGC automatically adjusts the image to compensate for changes in light levels. ON (Default setting) – Enables the AGC mode. OFF – Disables the AGC mode. BLC (BACK LIGHT COMPENSA TION) The BLC (backlight compensation) feature compensates for backlit scenes by enhancing objects in the center of the ...

  • Pelco 100 Series - page 13

    C2460M-A (7/03) 13 Figure 8. Window Adjustment REINST ALL THE LOWER DOME AND TRIM RING 1. Domes with Liners (only) – Position the viewing window over the lens of the camera. a. Loosen the three Phillip screws located in the dome. b. Insert the blade of a standard screwdriver in one of the adjustment grooves. Move dome into position. c. T ighten t ...

  • Pelco 100 Series - page 14

    14 C2460M-A (7/03) SPECIFICA TIONS BACKBOX Electrical Input V oltage: 12 VDC or 24 V AC, ±10%, auto-sensing Power Consumption: 13 watts or less V ideo Connector: BNC General Operating T emperature: -50° to 122°F (-46° to 50°C) De-ices to 25°F (-4°C) Pan/T ilt Adjustment: Manual; 360° pan; 180° tilt Construction: Aluminum with steel camera ...

  • Pelco 100 Series - page 15

    C2460M-A (7/03) 15 REVISION HISTORY Manual # Date Comments C2460M 4/03 Preliminary manual for beta testing. C2460M-A 7/03 Final version. ® Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, and Legacy are registered trademarks of Pelco. © Copyright 2003, Pelco. All rights reserved. W ARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will re ...

  • Pelco 100 Series - page 16

    World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO 9001 Orangeburg, New York Las Vegas, Nevada Eindhoven, The Netherlands Wokingham, United Kingdom Montreal, Canada ® ...

Produzent Pelco Kategorie Home Security System

Dokumente, die wir vom Produzenten des Geräts Pelco 100 Series erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Pelco
- Bedienungsanleitungen 100 Series
- Produktkarten Pelco
- Informationsbroschüren
- oder Energieetiketten Pelco 100 Series
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Pelco 100 Series.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Pelco 100 Series, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Pelco 100 Series. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Pelco 100 Series ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Pelco 100 Series, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Pelco 100 Series hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Pelco 100 Series verständlich ist.

Eine gänzliche Bedienungsanleitung von Pelco sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Pelco 100 Series bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Pelco 100 Series befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Pelco 100 Series, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Pelco 100 Series - die uns die ersten Schritte während der Nutzung von Pelco 100 Series erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Pelco 100 Series hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Pelco 100 Series im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Pelco 100 Series?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Pelco 100 Series nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Pelco 100 Series hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)