Bedienungsanleitung NHT SA-3

16 Seiten 2.49 mb
Download

Zur Seite of 16

Summary
  • NHT SA-3 - page 1

    SA-3 Subwoofer Amplifier Now Hear This 6400 Goodyear Road Benicia, CA 94510 800-NHT -9993 OWNER’S MANUAL  ...

  • NHT SA-3 - page 2

    1. READ INSTRUCTIONS - All safety and operating instructions should be read before the appliance is operated. 2. RET AIN INSTRUCTIONS - Safety and operating instructions should be ret ained for future reference. 3. HEED W ARNINGS - All warnings on the appliance and in operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS - All operati ...

  • NHT SA-3 - page 3

    Thank you for your purchase of the NHT SA-3 monaural subwoofer amplifier . Please take a few moments to read through this Owner ’s Manual prior to inst alling your new amplifier and/or subwoofer system. The information provided can help you to obt ain maximum performance from your audio system. For your convenience, a glossary at the end of this ...

  • NHT SA-3 - page 4

     Design NHT product s are designed to deliver refined, musical sound from attractive and affordable p ackages. Our effort s are guided by the study of human hearing and are optimized for real-world use. Every NHT product undergoes rigorous testing and quality control at the factory to ensure you years of listening pleasure. The NHT SA-3 Subwoofe ...

  • NHT SA-3 - page 5

    3 (A) Power Switch - T urns the unit on and off (B) Power / St atus Light - Tri-color LED: Green (On), Orange (S tandby), Red (Protect) (C) V olume Control - Adjusts the loudness of the subwoofer independently of the main speakers (D) Subwoofer Output T erminal - 5-way binding posts for connection to the subwoofer (E) High-Pass Filter (High Pass Fc ...

  • NHT SA-3 - page 6

     General Connections Caution: Prior to connecting the SA-3 to your system, it is important that all AC power connections to associated components (receivers, amplifiers, pre-amplifiers, processors, etc.) are either unplugged or turned off. Do not plug in or connect the SA-3 to AC power until all connections have been made. The SA-3 subwoofer amp ...

  • NHT SA-3 - page 7

    phase settings on the same track. Do not attempt to evaluate the best sound while standing above the subwoofer or amplifier , as the sound at the listening position will be significantly different.  Subwoofer V olume Control The SA-3’s front p anel VOLUME CONTROL allows you to adjust the volume of the subwoofer relative to the rest of the syst ...

  • NHT SA-3 - page 8

    This method of connection allows your main speakers to receive the full-range audio signal (no high-pass filtering), and the subwoofer to be utilized for low bass extension only . 1) Y our L & R speakers are connected directly from your amplifier / receiver . 2) If you have a receiver with “Pre-Out” (or “Line Out”) jacks but no “Main- ...

  • NHT SA-3 - page 9

    4) Connect the SA-3 SUBWOOFER OUTPUT to the SW3S input terminals with speaker cable. This method allows your main speakers to receive a high-pass filtered signal (not full range), and the subwoofer to be utilized for low- to mid-bass reproduction. The full-range line-level signal coming from the receiver’s “Pre-Out” passes through the SA-3’ ...

  • NHT SA-3 - page 10

     Fine T uning the Subwoofer The frequency chart below lists some terms commonly used to describe dif ferent bands of the frequency spectrum. The key to good subwoofer / speaker integration is repeated listening, followed by small re-adjustments of the subwoofer controls. The most im portant bass tuning functions you will control are the LOW-P AS ...

  • NHT SA-3 - page 11

     The SA-3 and Biamplification All NHT tower loudspeakers are designed with dual set s of binding posts to allow for biamplification. Biamplification is the use of two sep- arate amplifiers, one to power the low frequency (subwoofer) drivers and one to power the upper frequency (midrange / tweeter) drivers. The advantages of biamplification inclu ...

  • NHT SA-3 - page 12

    This connection method routes the full-range line-level signal from the preamplifier through the SA-3, which passes on a high-pass filtered signal to the main amplifier and powers the subwoofer sections of the speakers directly with a low-pass filtered signal. Do not use the receiver ’s “Subwoofer Out” jacks to connect the SA-3, as this signa ...

  • NHT SA-3 - page 13

    This connection method results in sending a full-range line-level signal to both the main amplifier and the SA-3. If you have a separate preamplifier that features two sets of line output s, each set is connected to one amplifier . If the preamplifier features only one set of line outputs, use “Y”-adaptors to split the signal. If you have a rec ...

  • NHT SA-3 - page 14

     Operation The SA-3 was designed to handle a wide range of listening levels, but every component has limits. It is import ant to use common sense and listen for signs of possible distress from the subwoofer . Noticeable distortion or harsh breakup is an indication that either the SA-3 or the subwoofer is running beyond its cap acity , and the vo ...

  • NHT SA-3 - page 15

     Glossary of T erms Active: Uses electrical power . Amplifier: An electronic device that increases the current of a signal, providing power to the loudspeakers (i.e. power amplifier , integrated amplifier , receiver). Bass: The range of audio frequencies below 160Hz, characterized by low pitch. Crossover: An electronic circuit that divides an au ...

  • NHT SA-3 - page 16

    W arranty (V alid Only in the U.S.A.) W arranty Period: For the period of 5 years for parts and 5 years for labor for loudspeaker product s and 1 year for part s and 1 year for labor for electronic components from date of original purchase (the warranty period) from an authorized NHT dealer , NHT warrant s that if our product fails to function prop ...

Produzent NHT Kategorie Stereo System

Dokumente, die wir vom Produzenten des Geräts NHT SA-3 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen NHT
- Bedienungsanleitungen SA-3
- Produktkarten NHT
- Informationsbroschüren
- oder Energieetiketten NHT SA-3
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung NHT SA-3.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen NHT SA-3, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen NHT SA-3. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts NHT SA-3 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts NHT SA-3, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von NHT SA-3 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von NHT SA-3 verständlich ist.

Eine gänzliche Bedienungsanleitung von NHT sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von NHT SA-3 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von NHT SA-3 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich NHT SA-3, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts NHT SA-3 - die uns die ersten Schritte während der Nutzung von NHT SA-3 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit NHT SA-3 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von NHT SA-3 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich NHT SA-3?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit NHT SA-3 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit NHT SA-3 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)