Deutsch dropdown-ico

Bedienungsanleitung Daewoo DT-42A1

72 Seiten 12.6 mb
Download

Zur Seite of 72

Summary
  • Daewoo DT-42A1 - page 1

    PLASMA DISPL A Y USER’S MANU AL D T -42A1 Proper use guar antees product life. Before using the product, be advised that you read this owner’ s manual well and try to operate it. Helpline Numb er : 087 0 1 0 0 2525 ...

  • Daewoo DT-42A1 - page 2

    F eatur es F eatur es • 42” VGA wide Plasma P anel • Built in 2-Analog T uners This PDP has 2-analog tuners inside for watching t errestrial broadcasting without the need to purchase a separate broadcasting rec eiver . • Support Picture -in-Picture (PIP) • D VD Direct Connection / Outstanding Picture Quality via a Digital Broadcast Receiv ...

  • Daewoo DT-42A1 - page 3

    Safety Pr ecautions Safety P recautions 4 • All the safety and operating instructions should be read befor e the product is operated. If anything strange happens, unplug this product from the wall outlet. • Do not disassemble or replace an y par ts of the T V . Refer to a qualified service personnel for repair . W ARNING Y ou can be Killed or ...

  • Daewoo DT-42A1 - page 4

    5 During Use Do not open the cov er (or back) because high voltage is presen t within the T V enclosure . It may cause electric shock . Never push an y kind of objec ts into this product through openings at the back of T V . It may cause fire or electric shock. Do not allow children to play or hang on the T V . These actions may tip it over , caus ...

  • Daewoo DT-42A1 - page 5

    6 • All the safety and operating instructions should be read before the pr oduct is operated. CA UTION Y ou can be injured, or this product or any other of your property can be damaged if you don ’t follow instructions. Pow e r Alwa ys obe y all safety messages . When moving y our T V , remove the power plug , antenna, and cables, and be sure t ...

  • Daewoo DT-42A1 - page 6

    7 During Use Do not wipe the T V using a cloth damped with chemicals (benzene, thinners, etc.). The T V appearance may be marr ed. (Unplug the power plug and wipe with soft cloth.) Do not place heavy objects or heat sources on the pow er cord . It may damage the power cord , causing fire or electric shock. Do not place an y object or cover on the ...

  • Daewoo DT-42A1 - page 7

    Note Check to be sure that the f ollowing items are packed with your Plasma panel. 8 Supplied Ac cessories Remote Con trol 1 UNIT F errite Cor e 1UNIT F or Scar t (1 unit) A C Cable 1 UNIT Checking Ac c essories Checking Ac c essories ...

  • Daewoo DT-42A1 - page 8

    Note The following it ems are optional accessories. Refer purchasing optional ac cessories from Daewoo Electronics Local Retailers or the retailer from wher e you purchased the unit. 9 T able T op Stand W all Moun ting Unit Optional Ac cessories ...

  • Daewoo DT-42A1 - page 9

    ...

  • Daewoo DT-42A1 - page 10

    11 PREP ARA TION 4 • Safety Precautions 8 • Checking Accessories 12 • Panel C ontrols 13 • Remote Control 14 • Remote Control Setup C ONNECTION 15 • Antenna Connection 18 • T o W atch T V 20 • Install Program 26 • W atching Digital Broadcasts 28 • W atching Cable Broadcasts 30 • W atching Satellite Broadcasts 32 • W atching ...

  • Daewoo DT-42A1 - page 11

    12 F ront P anel, Rear P anel * Items having the same names on the plasma display and the remote contr ol would function in exactly the same way. Fr ont / Side Pozycja obejm przeciwzakłóceniowych P anel Con trols P anel Con trols INPUT SELECT MENU VOLUME + - MOVE / PR + - L - O I D U A - R O E D I V - S O E D I V AV 3 STAND-BY/OPERATE ON/OFF • ...

  • Daewoo DT-42A1 - page 12

    13 Rear DVI- D INPUT PC INPUT (15 pi n D - su b) COMP ONE NT A /V j ack s (DTV/DVD INPUT jacks) SCART, A/ V INPUT /OUTPUT, Cable Rec eiver INPUT/ OUTPUT jacks ANT Used when manufac turing (or manuf ac turer us e onl y) Power DVI-D INPUT ANT AV1 AV 2 ...

  • Daewoo DT-42A1 - page 13

    19 19 58 20 43 53 50 46 69 70 51 55 14 Remote Con trol * The number in ( ) indicates the page in which the function of each button is explained in detail. T V/VCR/DVD/SA T/C A T V Channel Number (0-9) Use to select channel directly (0-9). RECALL Indicates the current state and resolution. TV Press t o select TV Mode. C OMPONENT , PC/DVI Press t o s ...

  • Daewoo DT-42A1 - page 14

    15 Remote C ontr ol S etup Remote C ontrol Setup Remo te C on trol s uppor tin g the mu lti bra nd de vic es. - The remote contr ol provided is designed to operate the Daew oo PDP set. - However , using the remote contr ol, you can control the C able Converter , VCR , DVD and Satellit e Broadcasting Receiver of other brands after setting up the rem ...

  • Daewoo DT-42A1 - page 15

    16 CT V An tenn a C onn ec tion C T V Antenna Connec tion When a coaxial cable is used T V antenna installation may be found in most. Plug the coaxial cable to the antenna socket, and fix it firmly . Antenna socket on the wall Antenna socket at the back of the PDP unit. When a feeder cable is used Antenna socket on the wall Antenna socket at the ...

  • Daewoo DT-42A1 - page 16

    17 Out door An t enna C onnection Outdoor antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses. Single Antenna C onnec tion. Separate A ntenna Connection. VHF Antenna UHF Antenna ANT/KABEL 1 In case of coaxial cable In case of feeder cable ANT/KABEL 1 Antenna combining adapter (separate purchase) VHF-Antenna ...

  • Daewoo DT-42A1 - page 17

    18 T o W atch T V T o W atch T V T o W at ch T V - The buttons on the keypad in the PDP unit, which hav e the same name as those on the remote control , per form the same function as the remote control. Press the “ON/OFF” button of the PDP unit. • The „ PR ” or power button of the remote contr ol and the keypad on the PDP unit would be op ...

  • Daewoo DT-42A1 - page 18

    PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 19 Press the “ ON/ OFF” button. • Press the “ON/OFF” button of the PDP unit. • The LED of the PDP unit turns red colour . • Press the “ PR ” , power button of the remote contr ol, or any button on the keypad of the PDP unit. • The LED of the PDP unit turns “ green ” colo ...

  • Daewoo DT-42A1 - page 19

    PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 20 Install Pr ogram Install Pr ogram Auto S e tup - This is the function for the T V to memorize the broadcasting channels . If the Auto Setup is done, you can simply find programs with “ PR ” buttons and so need not select programs b y pressing each program number . - Up to 100 T V statio ...

  • Daewoo DT-42A1 - page 20

    PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 21 Select t he “ A uto Setup” . • Select the “ Auto Setup” with the “ PR ” button. • Then press the “ VOL ” bu ...

  • Daewoo DT-42A1 - page 21

    22 Edit Edit Deleting the Progra m. • Place the selection bar on the program that you want to delete using the “ PR ” and “ VOL ” buttons. • Press the Delet e( Y ellow) button. • The deleted program goes t o PR number 99 for recov er . 1 Edit PR CH Na me Skip PR98 S41 _ _ _ _ o PR99 S41 _ _ _ _ o PR0 C69 _ _ _ _ PR1 S41 _ _ _ _ o PR2 ...

  • Daewoo DT-42A1 - page 22

    PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 23 Manu al Setup Manu al Setup Press the Number Buttons( 0 ~9) or the “ VO L ” Button to Select a Program Number Y ou W ant. 1 Picture Sound Screen Feature Install Manual Setup Program 01 Chan nel C0 6 Fine T une 48 Nam e – – – – – Video P AL Audio D/ K Search Memory Move Adjust E ...

  • Daewoo DT-42A1 - page 23

    PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 24 Manu al Setup Manu al Setup 4 Picture Sound Screen Feature Install Manual Setup Program 01 Chan nel C0 6 Fine T une 48 Nam e C06 Video P AL Audio D/ K Search Memory Move Adjust Exit Select t he Video and A udio S ystem. • Y ou can sele ...

  • Daewoo DT-42A1 - page 24

    PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 25 Find the Desired C hannel with ‘Search’ . • By selecting the Search function, you can find the desired channel, but it searches only one channel unlike Auto Setup . • If the nearest channel is found, the searching would be stopp ...

  • Daewoo DT-42A1 - page 25

    26 W at ching Digital Broadcasts W atching Digital Br oadcasts • T o watch digital broadcasts: - Purchase a separate Digital Broadcasting Receiver(SET -T OP BOX) - Connect the PDP to a Digital Broadcasting Receiver as shown right. W atching Digital Broadcasts Connect a Digital Broadcasting Receiv er to the PDP • Prepar e A/V cables. • Connect ...

  • Daewoo DT-42A1 - page 26

    C O M P O N E N T Com po ne nt 1 Com po ne nt 2 27 Input Select • Select [Component 1 or Component 2] by pressing the “COMPONENT” button of the remote contr ol or using the “INPUT SELEC T ” button of the PDP unit. • Each time you press the “COMPONENT” button, differ ent input modes appear . The sequence is as follo ws: 3 Select t h ...

  • Daewoo DT-42A1 - page 27

    AV 2 AV 1 L - O I D U A - R O E D I V - S O E D I V AV 3 • N. B. : Wh en using the AV3 input, th ere is no ne ed to use b oth as S -Vide o will always t ake prece dence on this in put but yo u must have the rig ht and le f t audio l eads conne cte d to pro duce soun d when usin g S-V ide o. 28 W at ching Cable Br oadcasts W atching C able Broadca ...

  • Daewoo DT-42A1 - page 28

    • N. B. : An S -Vid eo inp ut into A V3 w ill take p recede nce over the no rmal ye llow vid eo lea d so no ne ed to utilise this i f S-V ideo l ead is use d but you mus t still us e the right an d lef t aud io leads to p roduce sound. AV1 AV 2 AV ( S ) 3 AV 29 NO TES: 1) If your local cable company r e -transmits digital broadcasts, you may watc ...

  • Daewoo DT-42A1 - page 29

    AV 2 AV 1 L - O I D U A - R O E D I V - S O E D I V AV 3 • N. B. : If usin g A V3 then S -Vi deo t akes prece dence so no n eed fo r vide o lead i f S-V ideo l ead use d the audio l eads must s till be us ed to produc e sound. 30 W at ching S at ellite Br oadcasts W atching Satellite Br oadcasts • T o watch satellite broadcasting, subscribe to ...

  • Daewoo DT-42A1 - page 30

    AV1 AV 2 AV ( S ) 3 AV 31 Input Selec t • Select [A V 1(Scart), AV 2(Scart) or A V3(S-Video)] by pressing the [ A V ] button of the remote contr ol or the “INPUT SELECT ” in keypad of the PDP unit. • Each time you press the [ A V ] button, different input modes appear . The sequence is as follo ws: 3 Selec t the Desired Pr ogram and F unc ...

  • Daewoo DT-42A1 - page 31

    AV 2 AV 1 L - O I D U A - R O E D I V - S O E D I V AV 3 • N. B. : Vi deo in put can b e via sc ar t cab le S -Vide o lead o r yellow p hono ja ck. The re d and white p lugs are for l ef t and ri ght audio to accomp any the yellow v ide o lead or to b e use d with the S -Vid eo lea d to produ ce sound . 32 W at ching a DVD Image W atching a D VD ...

  • Daewoo DT-42A1 - page 32

    AV1 AV 2 AV ( S ) 3 Component 1 C omponent 2 33 NO TES: 1) Y/Cb/Cr , which stands for component video DVD player’ s output can also be written as Y/B-Y/R- Y , Y/Pb/P r depending on the kinds of DVD model. 2) The way of connecting the DVD to the PDP is as follo ws: Y <---> Y Cb <---> Pb , B- Y , Cr <---> Pr , R-Y 3) The DVD outpu ...

  • Daewoo DT-42A1 - page 33

    AV 2 AV 1 L - O I D U A - R O E D I V - S O E D I V AV 3 34 W at ching a V CR Image W atching a VCR Image • Video can use either the video terminal or the S-video terminal. W atching a VCR Image Connect a VCR to the PDP . • Prepar e the A V cable. • Connect the Video(Output) to PDP(Video Input) as shown below . • If using the scar t cable f ...

  • Daewoo DT-42A1 - page 34

    AV1 AV 2 AV ( S ) 3 AV 35 NO TES: 1) When connecting a VCR the S- Video terminal pro vides a better image than the Video terminal. 2) When connecting to the V ideo terminal, connect 3 colour A V cables (video, left audio , right audio) to the PDP; for the SV ideo terminal, connect the Audio terminal (L eft, Right) in the same way , and connec t the ...

  • Daewoo DT-42A1 - page 35

    AV 2 AV 1 L - O I D U A - R O E D I V - S O E D I V AV 3 36 W at ching a Camc order/Game C onsole Image W atching a C amc order/Game C onsole Image • Enjoy images recor ded by camcorder or the game console after connecting to the W atching a Camc order/Game Console Image Connect a Camc order/Game Console to the PDP . • Prepar e the A V cable. ? ...

  • Daewoo DT-42A1 - page 36

    AV1 AV 2 AV ( S ) 3 AV 37 NO TES: 1) When connecting the device, the S-V ideo terminal provides a better image than the Video terminal . 2) When connecting to the V ideo terminal, connect 3 colour A V cables (video, left audio , right audio) to the PDP; for the SV ideo terminal, connect the Audio terminal (L eft, Right) in the same way , and connec ...

  • Daewoo DT-42A1 - page 37

    38 C onnec ting PC(15pin D -sub) C onnec ting PC(15pin D -sub) • This product supports resolutions of VGA, SVGA, XGA. • Before c onnecting a PC to the PDP , be sure to adjust the resolution of the PC. C onnec ting PC Before C onnecting to the PDP , Set the Resolution of the PC. • Go to SETUP-CONTROL P ANEL-DISPLA Y PROPER TIES in Window Scree ...

  • Daewoo DT-42A1 - page 38

    P C / D V I PC DVI • N. B. : Y o u cannot s elec t PC o r DVI if the pi ctu re in p ict ur e mo de is on. 39 NO TES: 1) The resolution of the PC monitor is the best at 640 x 480 (VGA). 2) If there is a [ Vertical Fr equenc y]setting menu in the [Display] menu of the PC, adjust the frequency to 60Hz. 3) If the PC resolution is too high, it may be ...

  • Daewoo DT-42A1 - page 39

    DVI-D INPUT 40 C onnec ting PC(DVI) C onnec ting PC(DVI) • This product supports resolution of VGA, SVGA, X GA. • Before c onnecting a PC to the PDP , be sure to adjust the resolution of PC. • This product is supported by Plug and Play only at DVI. C onnec ting PC Before C onnecting to the PDP , Set the Resolution of the PC. • Go to SETUP-C ...

  • Daewoo DT-42A1 - page 40

    P C / D V I PC DVI • N. B. : Y ou cannot s ele ct PC o r DVI if the p ic ture in pic ture mo de is on . 41 NO TES: 1) The resolution of the PC monitor is the best at 640 x 480 (VGA). 2) If there is a [ Vertical Fr equenc y]setting menu in the [Display] menu of the PC, adjust the frequency to 60Hz. 3) If the PC resolution is too high, it may be ha ...

  • Daewoo DT-42A1 - page 41

    42 PC and DVI Input Resolution A vailable in PDP PC and DVI Input Resolution A vailable in PDP • Depending on graphic card , problems like no signal detected or line noises can happen. If these problems happen, contact the graphic card compan y for help . Resolution H Fr eq. (KHz) V Fr eq. (Hz) Remark DVI PC 640x400 37.861 85.080 VESA O 640x480 3 ...

  • Daewoo DT-42A1 - page 42

    ...

  • Daewoo DT-42A1 - page 43

    44 Selec ting Pic ture Mode Selec ting Pic ture Mode Selec ting Picture Mode • Press the [PICTURE MODE] on the remote contr ol. • While pressing the [PICTURE MODE] for the first time, the current picture mode will be displayed. 1 Each Press of the Button W ill Selec t One of F our Picture Modes. • Each time you press the button, a different ...

  • Daewoo DT-42A1 - page 44

    PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 45 C ustomising Picture C ustomising Pic ture • Y ou can adjust the colour tone and brightness to your prefer ence. C ustomising Picture Press the MENU Button. • The MENU shown below will displa y on the screen. 1 Press the ▼ PR ▲ Button. • After selecting [Picture] by the “ PR ” ...

  • Daewoo DT-42A1 - page 45

    PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 46 Selec t User Mode A djustments • While you are in [P icture Mode – User], press the “ PR ” buttons to select a specific adjustment item. 4 Picture Condition A djustments • Press the “ VOL ” buttons to adjust the picture of y our preference . • N.R. and CTI func tion adjust t ...

  • Daewoo DT-42A1 - page 46

    14:9 LB(14:9) LBS(14:9) LB(16:9) Auto 16:9 4:3 Panorama LBS(16:9) • N. B. : Y o u cannot s elec t scre en size if th e pic ture in pic ture mo de is on . 47 A djusting Screen A djusting Screen • Y ou can adjust screen size or aspect ratio as desired. Adjusting with Screen Size button Press the SCREEN SIZE Button. • The current screen siz e wi ...

  • Daewoo DT-42A1 - page 47

    48 A djusting Screen in the MENU A djusting Screen in the MENU • Y ou can adjust the screen in the menu. Adjusting Screen Press the MENU Butt on. • The MENU screen as shown belo w will appear . 1 Press the “ ▼ PR ▲ ” Button. • Press the ” PR ” buttons to select ‘Screen’ . 2 Picture Sound Screen Feature Install Mod e 16 : 9 H. ...

  • Daewoo DT-42A1 - page 48

    PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 49 Press the V olume “ VO L ” Buttons. • Press the Volume “ VOL ” buttons to enter the sub menu “Screen ” . • While you are in ‘Screen’ menu, press the ” PR ” or “PR ” button to select a desired item, and then, ad- just the value by pressing the “ VOL ” or “ VO ...

  • Daewoo DT-42A1 - page 49

    Still 50 Press the “STILL ” Button. • If you wish to freeze a picture , press the “STILL ” button. Y ou can still hear the sound. • Press “STILL ” button again to cancel the “STILL ” function. 1 W at ching a STILL Image W atching a STILL Image • Y ou can view still images with this function. However , displaying the same image ...

  • Daewoo DT-42A1 - page 50

    Main Sub Sub Sub Sub Sub Main Main Main <Using ‘Posit ion’ but ton> < Usin g „ PR ” and „ VOL ” buttons > Pip Si ze Adjusting th e size of the sub -pic ture with “ VOL ” buttons. Alp ha Bl end The a djustment o f alpha blen d allows the sub - pic ture to be tr ansluce nt. The tra nslucent rate is contro ll ed wi th “ V ...

  • Daewoo DT-42A1 - page 51

    52 W a tching T wo Pictures Simultaneously W a tching T wo P ic tures Simultaneously Selec t the progr am • Using program Up/Do wn buttons (PR /PR ), you may select the desired channels for sub-pictures. • The PR Up/Down buttons select the T V channels. 4 Selec t the Input Source • Various sig nal sources can be displayed within the sub-pictu ...

  • Daewoo DT-42A1 - page 52

    53 A dj u st i ng A ut o Sou nd M o de A djusting A uto Sound Mode • Enjoy various sound modes by selecting your fav ourite Sound Mode depending on the kinds of moving pictures. Adjusting A uto Sound Mode Selec t “SOUND MODE” . • Press the “SOUND MODE” on the remote control. • While pressing the “SOUND MODE” for the first time, t ...

  • Daewoo DT-42A1 - page 53

    PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 54 Press the MENU Butt on. • The MENU screen as below will be displa yed. 1 C ustomising Sound Mode C ustomising Sound Mode • This feature allo ws the user to adjust for their prefer ence. C ustomising Sound Mode Press the “ PR ” Button. • Select [Sound] by the “ PR ” buttons, the ...

  • Daewoo DT-42A1 - page 54

    55 • If a programme is receiv ed in two languages (dual language), you can switch to Dual I, Dual II or F mono by pressing the I/II button of the remote contr ol repeatedly . Dual I Dual I sends the primary broadcast language to the loudspeakers. Dual II Dual II sends the secondary broadcast language to the loudspeakers. F Mono F Mono sends the M ...

  • Daewoo DT-42A1 - page 55

    PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 56 C ustomising Sound Mode C ustomising Sound Mode Selec t the Sound Mode. • Select the Sound M ode by pressing the “ PR ” buttons, then adjust it by pressing the “ VOL ” buttons. 5 Picture Sound Screen Feature Install Bal ance 0 Effe ct O ff AVC Off Mode Normal 120Hz 0 500HZ 0 1. ...

  • Daewoo DT-42A1 - page 56

    Component 1 VCR/DVD SA T TV CA TV 57 Press the Input Signal Selecting Button. • Press the “ T V ” , “ A V ” , “C OMPONENT ” or “PC/DVI” button on the remote contr ol or the PDP Display to select the desired input signal. • Each time you press input mode buttons , a different input mode appears. The sequence used is as follo ws: ...

  • Daewoo DT-42A1 - page 57

    Comopnent 1 PM 12:00 PR22 PR Name Mono/Stereo T ime PR22 PR Name Mono PM 12:00 AV 1 PM 12:00 Component 1 PM 12:00 - Press the [R ECALL] butto n on the remote contro l, then displ ays basic infor mations of the cu rrent inpu t signal, Under this s tate, pressin g the [REC ALL] button o nce more, ad ditional i nformatio ns abou t the current in put s ...

  • Daewoo DT-42A1 - page 58

    PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 59 • Used to select the tanslucent level of MENU background and language used in MENU. Selec ting Languages MENU Back ground , Language and Child Lock Setting MENU Back ground , Language and Child Lock Setting Press the MENU Button. • The MENU screen will be display ed as below . 1 Press th ...

  • Daewoo DT-42A1 - page 59

    60 Selec t LANGU A GE by using the “ PR ”Button. • Select [Language] by using the” PR ” button. • Every press of the “VOL ” button while you are in the [Language] mode would cycle through the different languages . 4 MENU Back ground, Language and Child L ock Setting MENU Back ground, Language and Child L ock Setting NO TES: • Whe ...

  • Daewoo DT-42A1 - page 60

    61 • MGDI function can not be used In PC and DVI modes. MGDI MG DI (Me ta Gen ui ne Di gi tal Im age ) MGDI (Meta Genuine Digital Image) MGDI is the image enhancement technology of Daewoo Electronics , which provides more clear , realistic, and delicate images. Press the MENU Button. • The MENU screen will be display ed as below . 1 Selec t Fea ...

  • Daewoo DT-42A1 - page 61

    62 Auto P ow er Sett ing • Select the [Auto P ower] by pressing the “ PR ” button from [F eatures]. • Y ou can select [Auto P ower] ON and OFF mode by using the “VOL ” button. 1 A uto P ow er Set ting A uto P o wer Setting Au to Powe r 1) ON : When the AC power is ON, the T V will be turned on automatically without pressing the pow er b ...

  • Daewoo DT-42A1 - page 62

    63 T ime S etting T ime S etting Press the MENU Button. • The MENU screen will be display ed as below . 1 Selec t Fea tures • Select [Features] by the “ PR ” button. 2 Selec t Time Sett ing • Enter the sub menu by using the “ VOL ” button. • Select the [ Time Setting] with the “ PR ” button. • Enter [ Time Setting] by pressing ...

  • Daewoo DT-42A1 - page 63

    64 Off- Time and W ake time setting • Select Functions by pressing the “ PR ” but- ton. F irst, set [Clock]- current time, and then Y ou can setup off-time and wake time. • [Clock] : Adjust the desir ed hour and minute with “◄ VOL ► ” button. • [Auto Clock] : Automatically setting the cur- rent time by teletext signal. • [Off ...

  • Daewoo DT-42A1 - page 64

    65 ISM (Image Sticking M inimisation) ISM (Image Sticking M inimisation) Press the MENU Button. • The MENU screen will be display ed as below . 1 Press the “ PR ”Button. • Select [Features] by the “ PR ” button. 2 Selec t ISM. • Enter the sub menu by using the “ VOL ► ” button. • Select the [ISM] by pressing the “ ▼ PR ▲ ...

  • Daewoo DT-42A1 - page 65

    66 Selec t F unc tions. • Every press of the “VOL ” button af ter select function by the “ PR ” button would switch between ON/OFF . 4 ISM (Image Sticking Minimisation) ISM (Image Sticking M inimisation) NO TES: * Pix el Shift : The whole screen shifts up/down, left/right at 15 sec interval to minimize image sticking. * Low Bright: When d ...

  • Daewoo DT-42A1 - page 66

    67 Initialize Setting Initialize Setting Press the MENU Button. • The MENU screen will be display ed as below . 1 Selec t Fea tures • Select [Features] by the “ PR ” button. 2 • Y ou can restor e the values of the adjustment setting made in the MENU back to factory settings. Back to Initialization Picture Sound Screen Feature Install Mode ...

  • Daewoo DT-42A1 - page 67

    68 INIT IAL ISA TION • Enter the sub Menu by using the “VOL ” button. • Select the [I nitialize] by pr essing the “ PR ” button, then press the “ VOL ” button. • A confirmation message will be displayed . • T o per form initialization, press the “ VOL ” button after selecting [ YES] by the “ PR ” button. • T o return ...

  • Daewoo DT-42A1 - page 68

    Sleep Timer off Sleep Timer 15 Sleep Timer 30 Sleep Timer 120 Sleep Timer 90 Sleep Timer 60 69 Setting Sleep T imer Setting Sleep T imer Press the “SLEEP” But ton. • Press the “SLEEP ” button on the Remote Contro l. • Pressing the “SLEEP ” button first time will display the current setting f or Sleep Timer . • T o cancel the Sle ...

  • Daewoo DT-42A1 - page 69

    70 T elete x t T eletext Switching T eletext ON/OFF • Pr ess the T ext button ( ). T he index page or the page viewed last will appear . Pr ess the T ext button again to return to the T V mode. Colour buttons in T OP/FL OF T eletext • A red , green, yellow and cyan field is shown at the bottom of the screen. If TOP or FL OF T eletext is transm ...

  • Daewoo DT-42A1 - page 70

    71 Calling Up Subpage Directly • P ressing the Subpage ( ) button. The subpage number is displayed at the bott om of the screen. T o change the subpage, press the subpage number , for example, the 2nd page, sequence 02. The desired subpage will ev entually be displayed on the screen and holds it there . Pr ess this button again to exit this funct ...

  • Daewoo DT-42A1 - page 71

    Before r equesting for service, check the following points once again. 72 Befor e Requesting Ser vice Befor e Requesting Ser vice Symptoms • Remote control does not function properly . • The Display makes a snapping sound. • There are empty spots at the top and the bottom area of the screen. Checks • Check for any obstacle between the Remot ...

  • Daewoo DT-42A1 - page 72

    73 SPECIFICA TIONS DISPLA Y UNIT Diagonal Size 106 cm (42”) Screen Aspect Ratio 16:9 System P AL B/G, I/I, SECAM B/G, D/K, L/L ’ Display Resolution 852(H) x 480( V ) dots Pixe l Pit ch 1,08(H) x 1,08( V ) mm Dimension 1260(Sz.) x 653( W ) x 91(Gł.) mm 49.61(Sz.) x 25.71 ( W ) x 3.50 (Gł) inch W eight 33 kg (72.75Lbs) Po wer Requirement 100-24 ...

Produzent Daewoo Kategorie Flat Panel Television

Dokumente, die wir vom Produzenten des Geräts Daewoo DT-42A1 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Daewoo
- Bedienungsanleitungen DT-42A1
- Produktkarten Daewoo
- Informationsbroschüren
- oder Energieetiketten Daewoo DT-42A1
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Daewoo DT-42A1.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Daewoo DT-42A1, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Daewoo DT-42A1. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Daewoo DT-42A1 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Daewoo DT-42A1, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Daewoo DT-42A1 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Daewoo DT-42A1 verständlich ist.

Eine gänzliche Bedienungsanleitung von Daewoo sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Daewoo DT-42A1 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Daewoo DT-42A1 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Daewoo DT-42A1, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Daewoo DT-42A1 - die uns die ersten Schritte während der Nutzung von Daewoo DT-42A1 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Daewoo DT-42A1 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Daewoo DT-42A1 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Daewoo DT-42A1?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Daewoo DT-42A1 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Daewoo DT-42A1 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)