-
Smeg DUSF44X - page 1
Contents 29 EN 1 Instructions 30 1.1 How to read the user manual 30 1.2 This user manual 30 1.3 Appliance purpose 30 1.4 General safety instructions 30 1.5 Manufacturer liability 31 1.6 Identification plate 31 1.7 Disposal 31 2 Description 32 2.1 General Description 32 2.2 Control panel 33 2.3 Other parts 33 2.4 Available accessories 34 3 Use 36 3. ...
-
Smeg DUSF44X - page 2
Instructions 30 1 Instructions 1.1 How to read the user manual This user manual uses the following reading conventions: 1. Use instruction sequence. • Single use instruction. 1.2 This user manual This user manual is an integral part of the appliance and must therefore be kept in its entirety and in an accessible place for the whole working life o ...
-
Smeg DUSF44X - page 3
Instructions 31 EN For this appliance • Do not obstruct ventilation openings and heat dispersal slots. • Do not insert pointed metal objects (cutlery or utensils) into the slots in the appliance. • Do not rest any weight or sit on the open door of the appliance. • T ake care that no objects are stuck in the doors. • Do not use the applian ...
-
Smeg DUSF44X - page 4
Description 32 2 Description 2.1 General Description 1 Control panel 2 Oven light 3 Seal 4 Fan 5 Rack/tray support frames Frame shelf ...
-
Smeg DUSF44X - page 5
Description 33 EN 2.2 Control panel Auxiliary oven temperature knob (1) This knob allows you to select the cooking temperature. T urn the knob clockwise to the required value, between the minimum and maximum setting. Auxiliary oven thermostat indicator light (2) The thermostat indicator light remains lit when the oven is heating up. Once the oven h ...
-
Smeg DUSF44X - page 6
Description 34 Cooling fan The fan cools the oven and comes into operation during cooking. The fan causes a steady outflow of air from above the door which may continue for a brief period of time even after the appliance has been turned off. Interior lighting The oven light comes on when the door is opened or any function is selected. 2.4 Available ...
-
Smeg DUSF44X - page 7
Description 35 EN Oven tray Useful for collecting fat from foods placed on the rack above. Deep tray Useful for collecting fat from foods placed on the rack above and for cooking pies, pizzas and baked desserts. The oven accessories intended to come into contact with food are made of materials that comply with the provisions of current legislation. ...
-
Smeg DUSF44X - page 8
Description 36 3 Use 3.1 Instructions 3.2 First use 1. Remove any protective film from the outside or inside of the appliance, including accessories. 2. Remove any labels (apart from the technical data plate) from the accessories and from the oven cavity. 3. Remove and wash all the appliance accessories (see 4 Cleaning and maintenance). 4. Heat the ...
-
Smeg DUSF44X - page 9
Description 37 EN 3.3 Using the accessories Racks and trays Racks and trays have to be inserted into the side guides until they come to a complete stop. • The mechanical safety locks that prevent the rack from being taken out accidentally have to face downwards and towards the oven back. Tray rack The tray rack has to be inserted into the tray. I ...
-
Smeg DUSF44X - page 10
Use 38 3.4 Using the oven Switching on the oven T o switch on the oven: 1. Select the cooking function using the function knob. 2. Select the temperature using the temperature knob. Functions list Eco Using the grill and the lower heating element in combination is particularly suitable for cooking on a single shelf, as it provides low energy consum ...
-
Smeg DUSF44X - page 11
Use 39 EN 3.5 Cooking advice General advice • Use a fan assisted function to achieve consistent cooking at several levels. • It is not possible to shorten cooking times by increasing the temperature (the food could be overcooked on the outside and undercooked on the inside). Advice for cooking meat • Cooking times vary according to the thickn ...
-
Smeg DUSF44X - page 12
Use 40 Advice for cooking desserts/pastries and biscuits • Use dark metal moulds: they help to absorb the heat better. • The temperature and the cooking time depend on the quality and consistency of the dough. • T o check whether the dessert is cooked right through: at the end of the cooking time, put a toothpick into the highest point of the ...
-
Smeg DUSF44X - page 13
Use 41 EN 3.6 Programmer clock 1 Minute minder timer key 2 Cooking duration key 3 End of cooking key 4 V alue decrease key 5 V alue increase key Setting the time On the first use, or after a power failure, the digits will be flashing on the appliance's display. 1. Press the and keys at the same time. The dot between the hours and the minutes f ...
-
Smeg DUSF44X - page 14
Use 42 4. At the end of cooking the heating elements will be deactivated. On the display, symbol turns off, symbol flashes and the buzzer sounds. 5. To turn off the buzzer just press any key of the programmer clock. 6. Press keys and at the same time to reset the programmer clock. Programmed cooking 1. Set the cooking time as described in the previ ...
-
Smeg DUSF44X - page 15
Use 43 EN Minute minder timer The minute minder timer can be activated at any time. 1. Press . The display shows the digits and the indicator light flashing between the hours and the minutes. 2. Use the or key to set the required minutes. 3. Wait approx. 5 seconds without pressing any key to finish setting the minute minder. The current time and th ...
-
Smeg DUSF44X - page 16
Use 44 Main oven cooking information table Food Weight (Kg) Function Runner position from the bottom Temperature (°C) Time (minutes) Lasagne 3 Static 1 or 2 220 - 230 40 - 50 Pasta bake 2.5 Static 1 or 2 220 - 230 40 Roast veal 1 Fan assisted 2 180 - 190 70 - 80 Pork loin 1 Fan assisted 2 180 - 190 70 - 80 Pork shoulder 1 T urbo 2 180 - 190 90 - 1 ...
-
Smeg DUSF44X - page 17
Use 45 EN Auxiliary oven cooking information table Food Weight (Kg) Function Runner position from the bottom Temperature (°C) Time (minutes) Lasagne 3 / 4 Static 1 or 2 220 - 230 50 - 60 Pasta bake 2 Static 1 or 2 220 - 230 40 Roast veal 1 Static 2 180 - 190 70 - 80 Pork loin 1 Static 2 180 - 190 70 - 80 Pork shoulder 1 Static 2 180 - 190 90 - 100 ...
-
Smeg DUSF44X - page 18
Cleaning and maintenance 46 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the surfaces T o keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. 4.3 Ordinary daily cleaning Always use only specific products that do not contain abrasives or chlorine-based acids. Pour the product onto a damp ...
-
Smeg DUSF44X - page 19
Cleaning and maintenance 47 EN 3. To reassemble the door, put the hinges in the relevant slots in the oven, making sure that grooved sections A are resting completely in the slots. Lower the door and once it is in place remove the pins from the holes in the hinges. 4.6 Cleaning the door glazing The glass in the door should always be kept thoroughly ...
-
Smeg DUSF44X - page 20
Cleaning and maintenance 48 4. Clean the external glass pane and the panes previously removed. Use absorbent kitchen roll. In case of stubborn dirt, wash with a damp sponge and neutral detergent. 5. Refit the panes in the reverse order in which they were removed. 6. Reposition the internal glass pane. Take care to centre and insert the 4 pins into ...
-
Smeg DUSF44X - page 21
Cleaning and maintenance 49 EN Removing racks/trays support frames Removing the guide frames enables the sides to be cleaned more easily. This operation should be performed each time the automatic cleaning cycle is used (on some models only). T o remove the guide frames: Pull the frame towards the inside of the oven to unhook it from its groove A , ...
-
Smeg DUSF44X - page 22
Cleaning and maintenance 50 Incandescent lamps: 4. Unscrew and remove the lamp. 5. Replace the lamp with one of the same type (25W). 6. Refit the cover correctly, so that the moulded part of the glass is facing the door. 7. Press the cover completely down so that it attaches perfectly to the bulb support. Halogen lamps: 8. Slide out and remove the ...
-
Smeg DUSF44X - page 23
Installation 51 EN 5 Installation 5.1 Electrical connection General information Check the grid characteristics against the data indicated on the plate. The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance. Do not remove this plate for any reason. The appliance works at 220-240 V~. ...
-
Smeg DUSF44X - page 24
Installation 52 5.2 Cable replacement 1. Unscrew the fastening screws 2 of the terminal board cover. 2. Slide the tabs 1 of the terminal board cover out of the grooves; 3. Loosen the screw of the cable retention bracket in the right lower part of the oven back 3 ; 4. Make sure that the cables (for the oven or any hob) follow the best route in order ...
-
Smeg DUSF44X - page 25
Installation 53 EN Fixing T o secure the appliance to the counter, screw in 6 screws through the holes in the frame. Appliance overall dimensions (mm) ...
-
Smeg DUSF44X - page 26
Installation 54 Mounting (mm) The oven is designed for mounting into any piece of furniture as long as it is heat- resistant. Respect the unit dimensions and the oven overall dimensions for positioning. Depending on the type of installation a slot should be foreseen for ventilating the appliance. T o be able to open the door completely, any lower u ...
Haben Sie eine Frage bezüglich Smeg DUSF44X?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Smeg DUSF44X nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Smeg DUSF44X hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.