Bedienungsanleitung Homelite F3040

22 Seiten 0.83 mb
Download

Zur Seite of 22

Summary
  • Homelite F3040 - page 1

    OPERA T OR’S MANUAL T rimmer / Brushcutter F3040 UT70131 SAVE THIS MANUAL FOR FUTURE REFERENCE Your new trimmer has been engineered and manufactured to Homelite’s high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. Thank you for buying a Homelit ...

  • Homelite F3040 - page 2

    2 ■ ■ ■ ■ ■ Safety ......................................................................................................................... ............................................ 2 - 3 ■ ■ ■ ■ ■ Symbols ........................................................................................................................ ...

  • Homelite F3040 - page 3

    3 ■ ■ ■ ■ ■ Inspect the unit before each use for loose fasteners, fuel leaks etc. Replace any damaged parts before use. ■ ■ ■ ■ ■ The string head or blade will rotate during carburettor adjustments. ■ ■ ■ ■ ■ It has been reported that vibrations from hand-held tools may contribute to a condition called Raynaud’s Syn- ...

  • Homelite F3040 - page 4

    4 SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. SYMBOL NAME EXPLANATION Safety Alert Symbol Indicates danger, warning or caution. It means attention!!! Your safety is involved. Rea ...

  • Homelite F3040 - page 5

    5 SAVE THESE INSTRUCTIONS Weigh t Without fuel, cutting attachment ......................................................................................... .................. 5.48 Kg With blade ..................................................................................................................... ..................... 5.80 Kg With st ...

  • Homelite F3040 - page 6

    6 UNP ACKING INSTRUCTIONS ■ ■ ■ ■ ■ Carefully remove the product from the carton. ■ ■ ■ ■ ■ Inspect the product to make sure no breakage or damage occurred during carriage. ■ ■ ■ ■ ■ Do not discard the packing material until you have inspected and operated the product. PACKING LIST FOR OWNER’S KIT ■ ■ ■ ■ ■ ...

  • Homelite F3040 - page 7

    7 ASSEMBL Y Fig. 2 CLAMP FLAT WASHER LOCK WASHER HEX NUT STRAP HANGER BOLT 1/4-20 x 1 1/2 in SPACER CLAMP FRONT HANDLE See Figure 2. A barrier handle should be used for ensuring the best control and maximising operator safety. 1 . Hold the top and bottom clamp snugly in position on the shaft housing so that handle will be located to the operator’ ...

  • Homelite F3040 - page 8

    8 ASSEMBL Y SILENCER GUARD ASSEMBLY See Figure 4. 1 . Remove silencer guard and two screws from the owner’s kit. 2 . Attach the silencer guard to the rear housing. NOTE: Make sure the bent end of the silencer guard fits securely into the opening of the rear housing. 3 . Install two screws. 4 . Tighten screws securely. GRASS DEFLECTOR AND BLADE GU ...

  • Homelite F3040 - page 9

    9 ASSEMBL Y BLADE GUARD See Figure 6. 1 . Attach the blade guard to the mounting bracket; install the four screws (10-24 x 3/4 in) from the top of the mount- ing bracket through the blade guard and into the threaded mounting plates. 2 . Using the torque wrench supplied, tighten all four screws securely. NOTE: When using the string head, the string ...

  • Homelite F3040 - page 10

    10 ASSEMBL Y BLADE GUARD BLADE CUPPED WASHER BLADE NUT HOLDING PIN Fig. 8 SPANNER (13 mm) UPPER FLANGE WASHER INSTALLING THE BLADE See Figure 8. 1 . Place the upper flange washer over the gear shaft with the hollow side toward the blade guard. 2 . Centre the blade on the upper flange, making sure the blade sits flat. Install the cupped washer with ...

  • Homelite F3040 - page 11

    11 FUEL AND REFUELLING HANDLING THE FUEL SAFELY ■ ■ ■ ■ ■ Always handle fuel with care. It is highly flammable. ■ ■ ■ ■ ■ Always refuel outdoors where there are no sparks and flames. Do not inhale fuel vapour. ■ ■ ■ ■ ■ Do not let petrol or oil come in contact with your skin. ■ ■ ■ ■ ■ Keep petrol and oil awa ...

  • Homelite F3040 - page 12

    12 ADVANCING THE STRING ADVANCING STRING USING THE EZ LINE™ TAP ADVANCE SYSTEM String advance is controlled by tapping string head on grass while running engine at full throttle. 1 . Run engine at full throttle. 2 . Tap string head on ground to advance string. String advances each time the head is tapped. 3 . Several taps may be required until st ...

  • Homelite F3040 - page 13

    13 W ARNING: Extreme care must be taken when using blades to insure safe operation. Read the safety information for safe operation using the blade, refer to “Specific Safety Rules for Brushcutter and Blade Use” earlier in this manual. ■ Always hold brushcutter with both hands when operating. Use a firm grip on both handles. ■ Maintain your ...

  • Homelite F3040 - page 14

    14 1 W ARNING: Never start or run the engine inside a closed or poorly ventilated area; breathing exhaust fumes can kill. STARTING AND STOPPING See Figures 14 and 15. NOTE: The unit is equipped with an automatic choke feature. The starting instructions for this feature are different from units with a manual choke. Be sure to read and follow the sta ...

  • Homelite F3040 - page 15

    15 ■ You may make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorised service dealer. ■ Consequences of improper maintenance may include excess carbon deposits resulting in loss of performance and discharge of black oily residue dripping from the silencer. ■ Make sure all guards, straps, defle ...

  • Homelite F3040 - page 16

    16 STRING REPLACEMENT See Figures 18, 19, 20, and 21. 1 . Stop the engine, disconnect the sparking plug wire. Hold the string head and unscrew the spool retainer. Turn clockwise. 2 . Remove the spool from the string head. NOTE: Keep the spring attached to the spool. Remove any old string remaining on the spool. 3. Cut two pieces of string, each bei ...

  • Homelite F3040 - page 17

    17 2 1 3 ST O P S T S T OP 1 2 3 1 Fig. 23 Fig. 24 LATCH PULL COVER TO OPEN MAINTENANCE AIR FILTER COVER FILTER CLEANING THE EXHAUST PORT AND SILENCER Depending on the type of fuel used, the type and amount of oil used, and/or your operating conditions, the exhaust port and silencer may become blocked with carbon deposits. If you notice a power los ...

  • Homelite F3040 - page 18

    18 The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loosened, the check valve may be faulty or the filter clogged. Replace fuel cap if required. SPARKING PLUG This engine uses a Champion RCJ-6Y with 0.63 mm (0.025 in) electrode ...

  • Homelite F3040 - page 19

    19 TROUBLESHOOTING PROBLEM PROBLEM PROBLEM PROBLEM PROBLEM POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE SOLUTION SOLUTION SOLUTION SOLUTION SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM, CONT ACT YOUR AUTHORISED SERVICE DEALER. 1. Check spark. Remove sparking plug. Reattach the sparking plug cap and lay sparkin ...

  • Homelite F3040 - page 20

    20 1 TROUBLESHOOTING PROBLEM PROBLEM PROBLEM PROBLEM PROBLEM POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE SOLUTION SOLUTION SOLUTION SOLUTION SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM, CONT ACT YOUR AUTHORISED SERVICE DEALER. 1. Lubricate with silicone spray. 2 . Install more string. Refer to “String Repl ...

  • Homelite F3040 - page 21

    21 GUARANTEE – STATEMENT (RTSA / RTUK / RTG) All Homelite products are guaranteed from defects in material and workmanship for a period of twenty-four (24) months, effective and evidenced from date of original invoice or delivery note. Defects caused by normal wear and tear, unauthorised/improper maintenance/handling or overload are excluded from ...

  • Homelite F3040 - page 22

    983000-208 2-03 OPERA T OR’S MANUAL T rimmer / Brushcutter F3040 UT70131 Ryobi T echnologies GmbH Itterpark 7 D-40724 Hilden Germany Tel.: +49 (0)2103 / 29 58 0 Fax : +49 (0)2103 / 29 58 29 info@ryobi-rtg.de Ryobi T echnologies Customer Services Anvil House T uns Lane Henley-on-Thames RG9 1SA UK Homelite / R.T .S.A BP 50012 - 95945 Roissy CDG Ced ...

Produzent Homelite Kategorie Brush Cutter

Dokumente, die wir vom Produzenten des Geräts Homelite F3040 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Homelite
- Bedienungsanleitungen F3040
- Produktkarten Homelite
- Informationsbroschüren
- oder Energieetiketten Homelite F3040
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Homelite F3040.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Homelite F3040, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Homelite F3040. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Homelite F3040 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Homelite F3040, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Homelite F3040 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Homelite F3040 verständlich ist.

Eine gänzliche Bedienungsanleitung von Homelite sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Homelite F3040 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Homelite F3040 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Homelite F3040, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Homelite F3040 - die uns die ersten Schritte während der Nutzung von Homelite F3040 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Homelite F3040 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Homelite F3040 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Homelite F3040?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Homelite F3040 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Homelite F3040 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (3)

Валентин

Ищу порядок сборки карбюратора триммера Homelite F - 3040 порядок установки прокладок и регулировки после полной разборки карбюратора . Одну из прокладок не уверен в оустановке после сборки карбюратора при запуске свеча сухая воздушный фильтр мокрый Триммер не заводится при наличии искры на новой свече

Валентин

Скачать инструкцию Homelite F 3040 на яндекс диск на мой емайл "sergeew.svi@narod.ru"

Валентин

Заклинило поршневую с радиатором. Как её рашевелить для разборки и ревизии состояния и возможного ремонта. Как добраться до пускового механизма. Хотя он работает, но переходник к сцеплению не снимается без труда. Крепежа не видно. Съёмником можно повредить защиту. А как правильно это сделатьПоршневая связанная со ссцеплением вращается без проблем. второй поршень не вращается И затем как выставить сопряжение обоих поршней . Спасибо, если получу ответ Отработал триммер пять сезонов без проблем. Может это всё?нешне так не кажется