Bedienungsanleitung Allied Telesis AT-GS900/16

45 Seiten 3.33 mb
Download

Zur Seite of 45

Summary
  • Allied Telesis AT-GS900/16 - page 1

    613-001351 Rev. A Gigabit eco-friendly Ethernet Switches AT-GS900/16 AT-GS900/24 Installation Guide ...

  • Allied Telesis AT-GS900/16 - page 2

    Copyright © 2010 Allied Telesis, Inc. All rights reserved. No part of this publication may be repr oduced withou t prior written permissi on from Allied Telesis, Inc. Allied Telesis and the Allied Telesis logo are trademarks of Alli ed Telesis, In corporated. All other product n ames, company names, logos or other designations me nt ioned herein a ...

  • Allied Telesis AT-GS900/16 - page 3

    3 Electrical Safety and Emissions S tandards This product meets the following standards. RFI Emissions FCC Class A CISPR 22 Class A EN55022 Class A: 2006+A1:2007 versio n Immunity EN55024 Electrical Safety UL – USA (UL60950-1) LVD (EN60950-1, 2nd edition) CSA or cUL – Canada C-Tick – Australia CE Mark U.S. Federal Communications Commission Ra ...

  • Allied Telesis AT-GS900/16 - page 4

    4 T ranslated Safety S tatements Important: The  symbol indicates that a translation of t he safety state ment is available in a PDF document titled “Translated Safety State ments”. Th is is posted on the Allied Telesis website at http://www.alliedtelesis.com/support/software/ . Refer to “Whe re to Find Web-based Product Documentation” o ...

  • Allied Telesis AT-GS900/16 - page 5

    5 Preface ........ ................ ................ ............. ................ ................. ................ ................ ......... .................... ......... 11 Safety Symbols Used in this Document .............. ................. ................... ................ ................ ......... .......... 12 Where to Find Web-base ...

  • Allied Telesis AT-GS900/16 - page 6

    Contents 6 ...

  • Allied Telesis AT-GS900/16 - page 7

    7 Figure 1. Front Panels ................... ................. .................... ................. ................ ............... ................ ................. ................ 18 Figure 2. Back Panels ..... ................. .................... ................. ................ ................. ............. ........................ . ...

  • Allied Telesis AT-GS900/16 - page 8

    Figures 8 ...

  • Allied Telesis AT-GS900/16 - page 9

    9 Ta b l e s Table 1. Safety Sy mbols ....... ................. ................... ................. ................. ................. ........ .............. ................. ................ 12 Table 2. eco-friendly Switch Functions ................... ................ ................. .................... ............... ................ .. ...

  • Allied Telesis AT-GS900/16 - page 10

    List of Tables 10 ...

  • Allied Telesis AT-GS900/16 - page 11

    11 Pr eface This guide contains instructions on ho w to install the AT-GS900/16 and AT-GS900/24 Gigabit Ethernet Switc hes. This preface contains the following sections:  “Safety Symbols Used in this Document” o n page 12  “Where to Find W eb-based Guides” on page 13  “Contacting Allie d T elesis” on p age 14 ...

  • Allied Telesis AT-GS900/16 - page 12

    Preface 12 Safety Symbols Used in this Document This document uses the safety symbols defined in Table 1. T able 1. Safety Symbols Symbol Meaning Description Caution Performing or omi tting a specific action may result in equipment damage or loss of data. W arning Performing or omi tting a specific action may result in electrical shock. ...

  • Allied Telesis AT-GS900/16 - page 13

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 13 Where to Find Web-based Guides The product documentation for all Allied Telesis products are available in portable document forma t (PDF) on our web site. Go to http://www.alliedtelesis.com/support/s oftware/ . Enter your hardware product model in the Se arch by Pr ...

  • Allied Telesis AT-GS900/16 - page 14

    Preface 14 Contacting Allied Telesis This section provides Allied Telesis contact information for technical support as well as sales and corporate information . Online Support You can request technical sup port online by accessing the Allied Telesis Knowledge Base: www.alliedteles is.com/support/kb.aspx . You can use the Knowledge Base to submit qu ...

  • Allied Telesis AT-GS900/16 - page 15

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 15 ...

  • Allied Telesis AT-GS900/16 - page 16

    16 Chapter 1 Pr oduct Description The AT-GS900/16 and AT-GS900/24 switches a re low operating power, unmanaged, Layer 2 Fanless Gigabit Et hernet switches designed to simplify the task of creating or expanding a n Ethernet, Fast Ethernet, or Gigabit Ethernet network. This chapter contains the follo ws sections:  “Features” on page 17  “ ...

  • Allied Telesis AT-GS900/16 - page 17

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 17 Features AT-GS900/16 and AT-GS900/24 Gigabit eco-friendly Et hernet switches features include:  Silent fanless operation  Power saving port features on each port including: – Cable Length detection and power minimization – Link-Down power savings  LED ...

  • Allied Telesis AT-GS900/16 - page 18

    Chapter 1: Produc t Description 18 Components Figure 1 illustrates the front panels of the AT-GS900/16 and AT-GS900/24 switches. Figure 1. Front Panels Figure 2 illustrates the back panels of the AT-GS900/16 and AT-GS900/2 4 switches. Figure 2. Back Panels 24 Port 10/100/1000Base-T Gigabit Ethernet Switch 13579 1 1 1 3 1 5 1 7 1 9 2 1 2 3 24 6 8 10 ...

  • Allied Telesis AT-GS900/16 - page 19

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 19 Hardware Feature Description The following sections describe hardw are features of the AT-GS900/1 6 and AT-GS900/24 Fanless Gigabit Ethe rnet switches:  System and Port LEDs  T wisted Pair Ports  AC Power Connector Twisted Pair Ports The AT-GS900/16 Fanles ...

  • Allied Telesis AT-GS900/16 - page 20

    Chapter 1: Produc t Description 20 Maximum Distance Each twisted pair port has a maximum operating distance of 100 m (328 feet). Type of Cabling For 10 Mbps operation, Category 3 or b etter 100 ohm shielded or unshielded twisted pair cabling is required. For 100 or 1000 Mbps operation, Category 5 and Enhanced Category 5 (5E) 100 ohm shielded or uns ...

  • Allied Telesis AT-GS900/16 - page 21

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 21 eco-friendly Switch The eco-friendly switch on the front panel is multi-functional and shown in Figure 3. It may be used to ena ble all the port LEDs (out position) or conserve power by turnin g off the port LEDs (in position). The switch functions are described in ...

  • Allied Telesis AT-GS900/16 - page 22

    Chapter 1: Produc t Description 22 Table 3 describes the system a nd port LEDs on the AT-GS900/16 and AT-GS900/24 switches. AC Power Connector Both the AT-GS900/16 an d AT-GS900/24 switches have a single AC power supply socket on the back panel . To power ON or OFF the switch, you connect or disconnect t he power cord. See Figure 2 on page 18 for a ...

  • Allied Telesis AT-GS900/16 - page 23

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 23 Ethernet Switching Basics An Ethernet switch interconnects network devices, such as workstat ions, printers, routers, and other Ethernet switches, so that they can communicate with each other by sending and receiving Ethernet frames. MAC Address Table Every hardwar ...

  • Allied Telesis AT-GS900/16 - page 24

    Chapter 1: Produc t Description 24 the end-node is ope rating in what is referred to as h alf-duplex mode. If an end-node can both receive and tra nsmit data simultaneously, the end- node is said to be operating in full-duplex mode. Naturally, a n end-node capable of operating in full-du plex can handle data much faster than an end-node that can on ...

  • Allied Telesis AT-GS900/16 - page 25

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 25 ...

  • Allied Telesis AT-GS900/16 - page 26

    26 Chapter 2 Installation This chapter contains the following sections:  “Reviewing Safety Precautions” on p age 27  “Enter your hardware product model in t he Search by Product Name field; for example, enter A T -GS9 00/16 or A T -GS900/24. Y ou can view the documents online or download them onto yo ur local workstation or server .” ...

  • Allied Telesis AT-GS900/16 - page 27

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 27 Reviewing Safety Precautions Please review the followin g safety precautions before you begin to inst all the switch or any of its components.Th e  indicates that a translatio n of the safety statements is available in a PDF docume nt titled “Translated Safety ...

  • Allied Telesis AT-GS900/16 - page 28

    Chapter 2: Inst allation 28 Caution: Air vent s must not be blocked and must have free access to the room ambient air for cooling.  E8 W arning: Operating T emperature. This product is designed for a maximum ambient temperature of 40° degree s C.  E9 All Countries: Install product in accordance with local and National Electrical Codes.  E ...

  • Allied Telesis AT-GS900/16 - page 29

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 29 Selecting a Site for the Switch Observe the following requirements when choo sing a site for your switch:  If you plan to install th e switch in an equipment rack, ensure that the rack is safely secured and that it will not tip over . Devices in a rack should be ...

  • Allied Telesis AT-GS900/16 - page 30

    Chapter 2: Inst allation 30 Planning the Installation Table 4 contains the cab ling specifications for the twisted pair ports. Note The twisted pair ports on the switch featu re Auto-MDI when operating at either 10, 100, or 1 000 Mbps. Each port is individually configured as MDI or MDI-X when connected to an end-node. Consequently, you can use eith ...

  • Allied Telesis AT-GS900/16 - page 31

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 31 Unpacking the Switch To unpack an AT-GS900/16 or an AT-GS9 00/24 switch, perform the following procedure: 1. Remove all components from the shipping package. Note Store the packaging material in a safe location. You must use the original shipping material if you ne ...

  • Allied Telesis AT-GS900/16 - page 32

    Chapter 2: Inst allation 32 Installing the Switch on a Table or Desktop To install the switch on a table or deskt op, perform the following procedure: 1. Remove all the items from the packaging and store the packaging material in a safe place. In the event a p roblem occurs and you need to return the unit, please use as much of the origina l shippi ...

  • Allied Telesis AT-GS900/16 - page 33

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 33 5. Apply AC power to the switch by plugging the power cord into th e AC power connector on the back pan el of the unit, as illustrated in Figure 6. Figure 6. Connecting the AC Po wer Connector to Switch 6. Plug the other end or the power cord into a wall out let. 7 ...

  • Allied Telesis AT-GS900/16 - page 34

    Chapter 2: Inst allation 34 Installing the Switch on a Wall To install the switch on a wall, perform the following procedure: 1. Remove all the items from the packaging and store the packaging material in a safe place. In the event a p roblem occurs and you need to return the unit, please use as much of the origina l shipping material as possible. ...

  • Allied Telesis AT-GS900/16 - page 35

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 35 3. Place the switch on the wall. Then mount the switch using the plastic anchors and screws which are shipped with the p roduct. See Figure 8. Warning The switch must be mounted with the AC Power Con nector facing down to conform with UL requirements as shown in Fi ...

  • Allied Telesis AT-GS900/16 - page 36

    Chapter 2: Inst allation 36 crossover twisted pair cable to co nnect any type of network device to a port on the switch. If you disable Au to-Negotiation on the port, the port defaults to MDI-X. 5. Apply AC power to the switch by plugging the power cord in to the AC power connector on the back panel of the unit , as illustrated in Figure 6 on page ...

  • Allied Telesis AT-GS900/16 - page 37

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 37 Installing the Switch in a Rack Perform the following procedure to inst all the switch in a standard 19-inch rack. If you are not installing the switch in a rack, go to the next pro cedure. 1. Place the unit upside down on a level, secure sur face. 2. If they have ...

  • Allied Telesis AT-GS900/16 - page 38

    Chapter 2: Inst allation 38 5. Mount the switch in the 19-inch rack using the #10-32 Phillip s screws which are shipped with the prod uct, as illustrated in Figure 11. Figure 11. Rack Mounting the Switch 6. Connected the twisted pair cabl es to the twiste d pair ports. When connecting a twisted pair ca ble to a port, observe the following guideline ...

  • Allied Telesis AT-GS900/16 - page 39

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 39 10. Power ON the end-nodes connected to the switch . 11. Check that all the L/A LEDs are green o r blinking green for the ports connected to end-nodes. If any of the LEDs are OFF, refer to “Troubleshooting” on page 41 for instructions. The switch is now ready f ...

  • Allied Telesis AT-GS900/16 - page 40

    Chapter 2: Inst allation 40 ...

  • Allied Telesis AT-GS900/16 - page 41

    41 Chapter 3 T r oubleshooting This chapter contains information on how to troubleshoot the switch in the event that a problem occurs. Note If you are still unable to resolve the problem a fter following the instructions in this chapter, conta ct ATI Technical Support for assistance. Refer to “Contacting Allied Telesis” on page 14. Check the PO ...

  • Allied Telesis AT-GS900/16 - page 42

    42 Appendix A T echnical Specifications Physical Specifications Dimensions: (W x D x H) AT-GS900/16 12.1 cm x 18.4 cm x 4.4 cm (4.7 in x 7.2 in x 1.7 in) AT-GS900/24 28 cm x 18 cm x 4.4 cm (11.0 in x 7.1 in x 1.7 in) Weight: AT-GS900/16 0.954kg (2.1 lbs) AT-GS900/24 1.794 kg (3.95lbs) Environmental Specifications Operating Temperature: 0° C to 40? ...

  • Allied Telesis AT-GS900/16 - page 43

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 43 Safety and Electromagnetic Emissions Certifications EMI FCC Part 15 Class A CISPR 22 Class A, EN55022 Class A: 2006 + A1:2007 versio n Immunity EN55024 Safety UL - USA (UL60950-1) LVD (EN60950-1, 2nd edition) CSA or C UL - Canada C-Tick - Australia CD Mark Environm ...

  • Allied Telesis AT-GS900/16 - page 44

    Chapter : Technica l Specifications 44 RJ-45 Twisted Pair Port Connectors This section lists the connectors and connector pinout s for the AT-GS900/16 and AT-GS900/24 Fa nless Gigabit Ethernet Switches and their components. Figure 12 illustrates the pin layout to a n RJ-45 connector and port. Figure 12. RJ-45 Connector and Po rt Pin Layout Table 5 ...

  • Allied Telesis AT-GS900/16 - page 45

    AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 45 1000Base-T port is operating at 1 000 Mbps. T able 7. RJ-45 1000Base-T Connector Pinouts a a. Bi-directional data on each pair . Pin Pair Signal 1 1 TX and RX+ 2 1 TX and RX- 3 2 TX and RX+ 4 3 TX and RX+ 5 3 TX and RX- 6 2 TX and RX- 7 4 TX and RX+ 8 4 TX and RX- ...

Produzent Allied Telesis Kategorie Switch

Dokumente, die wir vom Produzenten des Geräts Allied Telesis AT-GS900/16 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Allied Telesis
- Bedienungsanleitungen AT-GS900/16
- Produktkarten Allied Telesis
- Informationsbroschüren
- oder Energieetiketten Allied Telesis AT-GS900/16
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Allied Telesis AT-GS900/16.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Allied Telesis AT-GS900/16, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Allied Telesis AT-GS900/16. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Allied Telesis AT-GS900/16 ansehen.

Die komplette Bedienungsanleitung des Geräts Allied Telesis AT-GS900/16, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Allied Telesis AT-GS900/16 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Allied Telesis AT-GS900/16 verständlich ist.

Eine gänzliche Bedienungsanleitung von Allied Telesis sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Allied Telesis AT-GS900/16 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Allied Telesis AT-GS900/16 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Allied Telesis AT-GS900/16, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Allied Telesis AT-GS900/16 - die uns die ersten Schritte während der Nutzung von Allied Telesis AT-GS900/16 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Allied Telesis AT-GS900/16 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Allied Telesis AT-GS900/16 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Allied Telesis AT-GS900/16?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Allied Telesis AT-GS900/16 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Allied Telesis AT-GS900/16 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)