-
Haier XQS70-98 - page 1
Please read this manual carefully before using. Retain it for future reference. Double-drive Automatic W ashing Machine This manual is for XQS70-98 User's manual ...
-
Haier XQS70-98 - page 2
Contents Names of the parts.............. Safety precautions............................................... 2 Installation and adjustment................................ Install the water inlet hose.................................. ..6 Preparation before washing................................ Put in the laundries.................................. ...
-
Haier XQS70-98 - page 3
Water inlet valve Water absorption cushion Power cord Handle Top lid components Inner cover components Detergent box Control panel seat Outer tub cover Balance ring Attachment block 3 pieces Inner tub Lint filter Pulsator Control panel coating Cabinet Liquid blenching filler Adjustable leg Rear faceplate The figure in this manual being sketch map a ...
-
Haier XQS70-98 - page 4
Safety precautions Earth The ventilation holes at the bottom Soft object Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacle is loose, do not use the plug any more. Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations in spinning. Please plug t ...
-
Haier XQS70-98 - page 5
Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the chil dren. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine Do not wash laundries with volatile materials (such as thinner, petro ...
-
Haier XQS70-98 - page 6
Inner cover shaft Outer tub cover shaft groove Outer tub cover Inner cover Install the bottom plate After opening the package, please lean the washing machine gently down on soft items (like towel cloth, blanket, etc.). Install the bottom plate to the bottom of the machine with eight screws by a cross screwdriver, then lift the machine up gently . ...
-
Haier XQS70-98 - page 7
1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2. Do not ramp or press the drain hose. 3. If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of the hose slantingly. 4. If extra drain hose is needed, ...
-
Haier XQS70-98 - page 8
The exit end face of the faucet Connection between the water inlet hose jointerand the water faucet water faucet, suitable water fauce t, not suitable It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. 2 Loosen the screw till the water faucet ...
-
Haier XQS70-98 - page 9
Connection between the water inlet hose and the washer Dismantle the water inlet hose Connection between the jointer of the water inlet hose and the water inlet hose Check the connection between the jointer of the water inlet hose and the water faucet 1. Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged ...
-
Haier XQS70-98 - page 10
1 Pr eparation bef or e w ashing Pay attention to followings before washing the laundries Preparation before washing 1. Connect the water inlet hose. Open the water faucet. 2. Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipel ...
-
Haier XQS70-98 - page 11
The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinning in one time. One time washing quantity shall be lower than the rated capacity. The thickness, size, type of the cloth will influence the actual washing capacity . It is suitable for one time wa ...
-
Haier XQS70-98 - page 12
Description of the function of the buttons 4 Use the oper a tion buttons Mode and meaning of the VFD indicator Digital tube During sensing, it displays During operation of programs, it displays the remained time (minute) or remained times of the corresponding procedure The digital tube corresponding to the running program lights. Tim es W ASH RINSE ...
-
Haier XQS70-98 - page 13
WATER LEVEL START PAUSE POWER ON/OFF PROGRAM RESERVE Reserve(hours later) Time remained(minutes) FIBRE COTTON WOOLLEN SILK QUICK POSTHASTE JEANS Page 16 10 8 6 4 2 9 7 5 3 1 NORMAL This function is used to protect the children and prevent them from changing the washing procedure. Push and hold the WA TER LEVEL button and SPIN button, then push down ...
-
Haier XQS70-98 - page 14
Page 11 POWER ON/OFF PROGRAM WASH RINSE SPIN START PAUSE POWER ON/OFF PROGRAM RESERVE WATER LEVEL Reserve(hours later) Time remained(minutes) 10 8 6 4 2 9 7 5 3 1 WASH RINSE SPIN Times FIBRE COTTON WOOLLEN SILK QUICK POSTHASTE JEANS NORMAL Steps of using the operation buttons and description of the steps Push the "POWER ON/OFF " button to ...
-
Haier XQS70-98 - page 15
Page 10 Page 12 Program Water level Wash(minutes) 1~10 About About 20 Fibre About 5 1~10 About 12 About 40 3 About 2 About 6 Normal 1~10 About 25-31 About 10-16 1~10 About 10 About 48 About 7 1~10 About 20 About 54 Jeans Rinse twice, about 5 each time About 3 1~10 About 3 About 25 1~10 About 5 About 4 About 30 WATER LEVEL After switching on the pow ...
-
Haier XQS70-98 - page 16
START Time remained(minute) Reserve(hours later) RESERVE Push the "START/P AUSE" button PAUSE 5 Close the lid 6 Finish washing After Finishing wash alarm automatically As the top lid opened ,the Washer will automatically give an alarm and stop running , exclusively during supplying water and rinsing. After finishing wash it'll switch ...
-
Haier XQS70-98 - page 17
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). 5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid. 4.Hang up the power cord and drain hose. 3.Be sure to pull off the power plug before maintenance. 2.Do not ...
-
Haier XQS70-98 - page 18
There may be some water flowing out of the drain hose in the first use of the machine. It is the water remained performance inspection by the factory. Common phenomena Phenomena Explanation The spinning is intermittent when it starts. The wash procedure pauses. Select spin program, but it does not work. Balance the laundries to avoid slanting. The ...
-
Haier XQS70-98 - page 19
Packing list 17 User's manual One One Component of the water inlet hose One One Name Quantity Bottom cover Topping screws Eight The end connecting to the washing machine Jointer connecting the water inlet hose and the water faucet The end co nnecting to t he water inlet h ose jointer Full automatic washing machine One Inner cover components 1/ ...
Haben Sie eine Frage bezüglich Haier XQS70-98?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Haier XQS70-98 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Haier XQS70-98 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.